1 /* $NetBSD: auvitekreg.h,v 1.1 2010/12/27 15:42:11 jmcneill Exp $ */
2 
3 /*-
4  * Copyright (c) 2010 Jared D. McNeill <jmcneill@invisible.ca>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
17  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
18  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
20  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26  * POSSIBILITY OF SUCH DAMAGE.
27  */
28 
29 #ifndef _AUVITEKREG_H
30 #define _AUVITEKREG_H
31 
32 #define   AU0828_CMD_REQUEST_IN         0x00
33 #define   AU0828_CMD_REQUEST_OUT        0x01
34 
35 #define   AU0828_REG_GPIO1_OUTEN        0x0000
36 #define   AU0828_REG_GPIO2_OUTEN        0x0001
37 #define   AU0828_REG_GPIO1_PINDIR       0x0002
38 #define   AU0828_REG_GPIO2_PINDIR       0x0003
39 
40 #define   AU0828_REG_SENSOR_CTL         0x0100
41 #define   AU0828_REG_SENSORVBI_CTL 0x0103
42 
43 #define   AU0828_REG_HPOS_LO  0x0110
44 #define   AU0828_REG_HPOS_HI  0x0111
45 #define   AU0828_REG_VPOS_LO  0x0112
46 #define   AU0828_REG_VPOS_HI  0x0113
47 #define   AU0828_REG_HRES_LO  0x0114
48 #define   AU0828_REG_HRES_HI  0x0115
49 #define   AU0828_REG_VRES_LO  0x0116
50 #define   AU0828_REG_VRES_HI  0x0117
51 
52 #define   AU0828_REG_I2C_TRIGGER        0x0200
53 #define  AU0828_I2C_TRIGGER_WR                    0x01
54 #define    AU0828_I2C_TRIGGER_RD                  0x20
55 #define    AU0828_I2C_TRIGGER_HOLD      0x40
56 #define   AU0828_REG_I2C_STATUS         0x0201
57 #define    AU0828_I2C_STATUS_RD_DONE    0x01
58 #define    AU0828_I2C_STATUS_NO_RD_ACK  0x02
59 #define    AU0828_I2C_STATUS_WR_DONE    0x04
60 #define    AU0828_I2C_STATUS_NO_WR_ACK  0x08
61 #define    AU0828_I2C_STATUS_BUSY                 0x10
62 #define   AU0828_REG_I2C_CLKDIV         0x0202
63 #define    AU0828_I2C_CLKDIV_250                  0x07
64 #define    AU0828_I2C_CLKDIV_100                  0x14
65 #define    AU0828_I2C_CLKDIV_30                   0x40
66 #define   AU0828_REG_I2C_DSTADDR        0x0203
67 #define   AU0828_REG_I2C_FIFOWR         0x0205
68 #define   AU0828_REG_I2C_FIFORD         0x0209
69 #define   AU0828_REG_I2C_MBMODE         0x02ff
70 
71 #define   AU0828_REG_AUDIOCTL 0x050c
72 
73 #define   AU0828_REG_POWER_CTL          0x0600
74 #define    AU0828_POWER_EN              0x10
75 
76 #endif /* !_AUVITEKREG_H */
77