1 /*        $NetBSD: com_obio.c,v 1.25 2018/12/08 17:46:13 thorpej Exp $          */
2 
3 /*-
4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Charles M. Hannum.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*-
33  * Copyright (c) 1991 The Regents of the University of California.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  * 1. Redistributions of source code must retain the above copyright
40  *    notice, this list of conditions and the following disclaimer.
41  * 2. Redistributions in binary form must reproduce the above copyright
42  *    notice, this list of conditions and the following disclaimer in the
43  *    documentation and/or other materials provided with the distribution.
44  * 3. Neither the name of the University nor the names of its contributors
45  *    may be used to endorse or promote products derived from this software
46  *    without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
52  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
53  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
54  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
55  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
57  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58  * SUCH DAMAGE.
59  *
60  *        @(#)com.c 7.5 (Berkeley) 5/16/91
61  */
62 
63 #include <sys/cdefs.h>
64 __KERNEL_RCSID(0, "$NetBSD: com_obio.c,v 1.25 2018/12/08 17:46:13 thorpej Exp $");
65 
66 #include <sys/param.h>
67 #include <sys/systm.h>
68 #include <sys/ioctl.h>
69 #include <sys/select.h>
70 #include <sys/tty.h>
71 #include <sys/proc.h>
72 #include <sys/conf.h>
73 #include <sys/file.h>
74 #include <sys/uio.h>
75 #include <sys/kernel.h>
76 #include <sys/syslog.h>
77 #include <sys/types.h>
78 #include <sys/device.h>
79 #include <sys/termios.h>
80 
81 #include <sys/bus.h>
82 #include <machine/autoconf.h>
83 #include <machine/intr.h>
84 
85 #include <dev/ic/comreg.h>
86 #include <dev/ic/comvar.h>
87 
88 #include <sparc/sparc/auxreg.h>
89 
90 struct com_obio_softc {
91           struct com_softc osc_com;     /* real "com" softc */
92 
93           int osc_tadpole;              /* is this on a tadpole */
94           /* OBIO-specific goo. */
95           struct evcnt osc_intrcnt;     /* interrupt counting */
96 };
97 
98 static int com_obio_match(device_t, cfdata_t , void *);
99 static void com_obio_attach(device_t, device_t, void *);
100 
101 CFATTACH_DECL_NEW(com_obio, sizeof(struct com_obio_softc),
102     com_obio_match, com_obio_attach, NULL, NULL);
103 
104 static int
com_obio_match(device_t parent,cfdata_t cf,void * aux)105 com_obio_match(device_t parent, cfdata_t cf, void *aux)
106 {
107           union obio_attach_args *uoba = aux;
108           struct sbus_attach_args *sa = &uoba->uoba_sbus;
109           int tadpole = 0;
110           int need_probe = 0;
111           int rv = 0;
112           uint8_t auxregval = 0;
113 
114           if (uoba->uoba_isobio4 != 0) {
115                     return (0);
116           }
117 
118           /*
119            * Tadpole 3GX/3GS uses "modem" for a 16450 port
120            * (We need to enable it before probing)
121            */
122           if (strcmp("modem", sa->sa_name) == 0) {
123                     auxregval = *AUXIO4M_REG;
124                     *AUXIO4M_REG = auxregval | (AUXIO4M_LED|AUXIO4M_LTE);
125                     DELAY(100);
126                     tadpole = 1;
127                     need_probe = 1;
128           }
129 
130           /*
131            * Sun JavaStation 1 uses "su" for a 16550 port
132            */
133           if (strcmp("su", sa->sa_name) == 0) {
134                     need_probe = 1;
135           }
136 
137           if (need_probe) {
138                     bus_space_handle_t ioh;
139 
140                     if (sbus_bus_map(sa->sa_bustag,
141                                          sa->sa_slot, sa->sa_offset, sa->sa_size,
142                                          BUS_SPACE_MAP_LINEAR, &ioh) == 0) {
143                               rv = comprobe1(sa->sa_bustag, ioh);
144 #if 0
145                               printf("modem: probe: lcr=0x%02x iir=0x%02x\n",
146                                         bus_space_read_1(sa->sa_bustag, ioh, 3),
147                                         bus_space_read_1(sa->sa_bustag, ioh, 2));
148 #endif
149                               bus_space_unmap(sa->sa_bustag, ioh, sa->sa_size);
150                     }
151           }
152 
153           /* Disable the com port if tadpole */
154           if (tadpole)
155                     *AUXIO4M_REG = auxregval;
156 
157           return (rv);
158 }
159 
160 static void
com_obio_attach(device_t parent,device_t self,void * aux)161 com_obio_attach(device_t parent, device_t self, void *aux)
162 {
163           struct com_obio_softc *osc = device_private(self);
164           struct com_softc *sc = &osc->osc_com;
165           union obio_attach_args *uoba = aux;
166           struct sbus_attach_args *sa = &uoba->uoba_sbus;
167           bus_space_handle_t ioh;
168           bus_space_tag_t iot;
169           bus_addr_t iobase;
170 
171           sc->sc_dev = self;
172 
173           if (strcmp("modem", sa->sa_name) == 0) {
174                     osc->osc_tadpole = 1;
175           }
176 
177           /*
178            * We're living on an obio that looks like an sbus slot.
179            */
180           iot = sa->sa_bustag;
181           iobase = sa->sa_offset;
182           sc->sc_frequency = COM_FREQ;
183 
184           /*
185            * XXX: It would be nice to be able to split console input and
186            * output to different devices.  For now switch to serial
187            * console if PROM stdin is on serial (so that we can use DDB).
188            */
189           if (prom_instance_to_package(prom_stdin()) == sa->sa_node)
190                     comcnattach(iot, iobase, B9600, sc->sc_frequency,
191                         COM_TYPE_NORMAL, (CLOCAL | CREAD | CS8));
192 
193           if (!com_is_console(iot, iobase, &ioh) &&
194               sbus_bus_map(iot, sa->sa_slot, iobase, sa->sa_size,
195                                BUS_SPACE_MAP_LINEAR, &ioh) != 0) {
196                     aprint_error(": can't map registers\n");
197                     return;
198           }
199 
200           com_init_regs(&sc->sc_regs, iot, ioh, iobase);
201 
202           if (osc->osc_tadpole) {
203                     *AUXIO4M_REG |= (AUXIO4M_LED|AUXIO4M_LTE);
204                     do {
205                               DELAY(100);
206                     } while (!com_probe_subr(&sc->sc_regs));
207 #if 0
208                     printf("modem: attach: lcr=0x%02x iir=0x%02x\n",
209                               bus_space_read_1(sc->sc_regs.iot, sc->sc_regs.ioh, 3),
210                               bus_space_read_1(sc->sc_regs.iot, sc->sc_regs.ioh, 2));
211 #endif
212           }
213 
214           com_attach_subr(sc);
215 
216           if (sa->sa_nintr != 0) {
217                     (void)bus_intr_establish(sc->sc_regs.cr_iot, sa->sa_pri,
218                         IPL_SERIAL, comintr, sc);
219                     evcnt_attach_dynamic(&osc->osc_intrcnt, EVCNT_TYPE_INTR, NULL,
220                         device_xname(self), "intr");
221           }
222 
223           if (!pmf_device_register1(self, com_suspend, com_resume, com_cleanup)) {
224                     aprint_error_dev(self, "could not establish shutdown hook");
225           }
226 }
227