1# $NetBSD: GENERIC,v 1.147 2023/12/19 02:35:17 uwe Exp $
2#
3# GENERIC machine description file
4#
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include   "arch/netwinder/conf/std.netwinder"
22
23options   INCLUDE_CONFIG_FILE # embed config file in kernel binary
24
25# estimated number of users
26
27maxusers  32
28
29# Standard system options
30
31options   RTC_OFFSET=0        # hardware clock is this many mins. west of GMT
32#options  NTP                 # NTP phase/frequency locked loop
33
34# Alternate buffer queue strategies for better responsiveness under high
35# disk I/O load.
36#options  BUFQ_READPRIO
37options   BUFQ_PRIOCSCAN
38
39# CPU options
40
41# For StrongARM systems
42options   CPU_SA110 # Support the SA110 core
43makeoptions         CPUFLAGS="-march=armv4 -mtune=strongarm"
44
45# Default console is wscons, if igsfb(4) and pckbc(4) are configured,
46# or com(4) otherwise.  You can force a serial console with these options
47#options  CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200
48
49
50# File systems
51
52file-system         FFS                 # UFS
53#file-system        LFS                 # log-structured file system
54file-system         MFS                 # memory file system
55file-system         NFS                 # Network file system
56#file-system        ADOSFS              # AmigaDOS-compatible file system
57#file-system        EXT2FS              # second extended file system (linux)
58#file-system        CD9660              # ISO 9660 + Rock Ridge file system
59file-system         MSDOSFS             # MS-DOS file system
60file-system         FDESC               # /dev/fd
61file-system         KERNFS              # /kern
62file-system         NULLFS              # loopback file system
63file-system         PROCFS              # /proc
64#file-system        UMAPFS              # NULLFS + uid and gid remapping
65#file-system        UNION               # union file system
66file-system         PTYFS               # /dev/pts/N support
67file-system         TMPFS               # Efficient memory file-system
68#file-system        UDF                 # experimental - OSTA UDF CD/DVD file-system
69
70# File system options
71#options  FFS_EI              # FFS Endian Independent support
72#options  FFS_NO_SNAPSHOT     # No FFS snapshot support
73#options  QUOTA               # legacy UFS quotas
74#options  QUOTA2              # new, in-filesystem UFS quotas
75#options  UFS_DIRHASH         # UFS Large Directory Hashing
76#options  UFS_EXTATTR         # Extended attribute support for UFS1
77options   WAPBL               # File system journaling support
78#options  NFSSERVER # Network File System server
79
80# Networking options
81
82#options  GATEWAY             # packet forwarding
83options   INET                # IP + ICMP + TCP + UDP
84options   INET6               # IPV6
85#options  IPSEC               # IP security
86#options  IPSEC_DEBUG         # debug for IP security
87#options  MROUTING  # IP multicast routing
88#options  PIM                 # Protocol Independent Multicast
89#options  NETATALK  # AppleTalk networking
90#options  PPP_BSDCOMP         # BSD-Compress compression support for PPP
91#options  PPP_DEFLATE         # Deflate compression support for PPP
92#options  PPP_FILTER          # Active filter support for PPP (requires bpf)
93#options  TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
94
95#options  ALTQ                # Manipulate network interfaces' output queues
96#options  ALTQ_BLUE # Stochastic Fair Blue
97#options  ALTQ_CBQ  # Class-Based Queueing
98#options  ALTQ_CDNR # Diffserv Traffic Conditioner
99#options  ALTQ_FIFOQ          # First-In First-Out Queue
100#options  ALTQ_FLOWVALVE      # RED/flow-valve (red-penalty-box)
101#options  ALTQ_HFSC # Hierarchical Fair Service Curve
102#options  ALTQ_LOCALQ         # Local queueing discipline
103#options  ALTQ_PRIQ # Priority Queueing
104#options  ALTQ_RED  # Random Early Detection
105#options  ALTQ_RIO  # RED with IN/OUT
106#options  ALTQ_WFQ  # Weighted Fair Queueing
107
108options   NFS_BOOT_BOOTP
109options   NFS_BOOT_DHCP
110#options  NFS_BOOT_BOOTPARAM
111
112# Compatibility options
113
114options   COMPAT_NETBSD32     # allow running arm (e.g. non-earm) binaries
115include   "conf/compat_netbsd14.config"
116
117# Shared memory options
118
119options   SYSVMSG             # System V-like message queues
120options   SYSVSEM             # System V-like semaphores
121options   SYSVSHM             # System V-like memory sharing
122
123# Device options
124
125#options  MEMORY_DISK_HOOKS   # boottime setup of ramdisk
126#options  MEMORY_DISK_ROOT_SIZE=3400    # Size in blocks
127#options  MEMORY_DISK_IS_ROOT # use memory disk as root
128
129# Miscellaneous kernel options
130options   KTRACE              # system call tracing, a la ktrace(1)
131options   IRQSTATS  # manage IRQ statistics
132#options  SCSIVERBOSE         # Verbose SCSI errors
133#options  PCIVERBOSE          # Verbose PCI descriptions
134#options  MIIVERBOSE          # Verbose MII autoconfuration messages
135#options  PCI_CONFIG_DUMP     # verbosely dump PCI config space
136#options  DDB_KEYCODE=0x40
137options   USERCONF  # userconf(4) support
138#options  PIPE_SOCKETPAIR     # smaller, but slower pipe(2)
139options   SYSCTL_INCLUDE_DESCR          # Include sysctl descriptions in kernel
140
141# Development and Debugging options
142
143#options  ARM700BUGTRACK      # track the ARM700 swi bug
144#options  PORTMASTER          # Enable PortMaster only options
145#options  DIAGNOSTIC          # internal consistency checks
146#options  UVMHIST             # kernhist for uvm/pmap subsystems
147options   DDB                 # in-kernel debugger
148options   DDB_HISTORY_SIZE=100          # Enable history editing in DDB
149#makeoptions        DEBUG="-g"          # compile full symbol table
150#makeoptions        COPY_SYMTAB=1       # see also ksyms below
151
152config              netbsd    root on ? type ?
153
154# The main bus device
155mainbus0  at root
156
157# The boot CPU
158cpu0                at mainbus?
159
160# Core logic
161footbridge0         at mainbus?
162
163# footbridge uart
164#fcom0              at footbridge?
165
166# system clock via footbridge
167#clock*             at footbridge?
168
169# PCI bus via footbridge
170pci0                at footbridge?                          # PCI bus
171
172# ISA bus support
173pcib*               at pci? dev ? function ?      # ISA bridge
174isa*                at pcib?
175
176
177# PCI IDE Controllers and Devices
178# PCI IDE controllers - see pciide(4) for supported hardware.
179# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
180# how to set up DMA modes for this chip. This may work, or may cause
181# a machine hang with some controllers.
182#pciide*  at pci? dev ? function ? flags 0x0000   # GENERIC pciide driver
183slide*    at pci? dev ? function ?      # Symphony Labs IDE controllers
184
185# ATA (IDE) bus support
186atabus* at ata?
187
188# IDE drives
189# Flags are used only with controllers that support DMA operations
190# and mode settings (e.g. some pciide controllers)
191# The lowest order four bits (rightmost digit) of the flags define the PIO
192# mode to use, the next set of four bits the DMA mode and the third set the
193# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
194# to use, and the last bit must be 1 for this setting to be used.
195# For DMA and UDMA, 0xf (1111) means 'disable'.
196# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
197# (0xc=1100, 0xa=1010, 0xf=1111)
198# 0x0000 means "use whatever the drive claims to support".
199wd*                 at atabus? drive ? flags 0x0000         # the drives themselves
200
201# PCI network interfaces
202ne*                 at pci? dev ? function ?      # NE2000 compat ethernet
203tlp*                at pci? dev ? function ?      # DECchip 21x4x (and clones) Ethernet
204options   TLP_MATCH_21142
205
206# MII/PHY support
207icsphy*             at mii? phy ?                           # ISC-189x PHYs
208ukphy*              at mii? phy ?                           # generic unknown PHYs
209
210
211# WSCONS Support
212options   WSEMUL_VT100                  # VT100 / VT220 emulation
213
214# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
215options   WSDISPLAY_CUSTOM_OUTPUT       # color customization from wsconsctl(8)
216#options  WS_DEFAULT_FG=WSCOL_WHITE
217#options  WS_DEFAULT_BG=WSCOL_BLACK
218#options  WS_DEFAULT_COLATTR="(0)"
219#options  WS_DEFAULT_MONOATTR="(0)"
220options   WS_KERNEL_FG=WSCOL_GREEN
221#options  WS_KERNEL_BG=WSCOL_BLACK
222options   WS_KERNEL_COLATTR=WSATTR_HILIT
223#options  WS_KERNEL_MONOATTR="(0)"
224
225# compatibility to other console drivers
226options   WSDISPLAY_COMPAT_PCVT                   # emulate some ioctls
227options   WSDISPLAY_COMPAT_SYSCONS      # emulate some ioctls
228options   WSDISPLAY_COMPAT_USL                    # wsconscfg VT handling
229options   WSDISPLAY_COMPAT_RAWKBD                 # can get raw scancodes
230
231options   FONT_GALLANT12x22             # Sun PROM font look-alike
232
233pckbc0              at isa?
234pckbd*              at pckbc?
235wskbd*              at pckbd? console ?
236pms*                at pckbc?
237wsmouse*  at pms? mux 0
238
239igsfb*              at pci? dev ? function ?
240wsdisplay*          at igsfb? console ?
241
242
243# ISA Devices
244com0                at isa? port 0x3f8 irq 4
245lpt0                at isa? port 0x378 irq 7
246
247
248# Audio Devices
249
250# ISA audio devices
251sb0                 at isa? port 0x220 irq 3 drq 1 drq2 7   # SoundBlaster
252opl*                at sb?
253mpu*                at sb?
254midi*               at sb?                                            # SB1 MIDI port
255
256# Audio support
257audio*              at sb?
258
259spkr*     at audio?           # PC speaker (synthesized)
260
261# Pseudo-Devices
262
263#pseudo-device      crypto              # /dev/crypto device
264#pseudo-device      swcrypto  # software crypto implementation
265
266# disk/mass storage pseudo-devices
267#pseudo-device      md                            # memory disk device (ramdisk)
268pseudo-device       vnd                           # disk-like interface to files
269#options  VND_COMPRESSION               # compressed vnd(4)
270pseudo-device       fss                           # file system snapshot device
271#pseudo-device      cgd                           # cryptographic disk devices
272
273# network pseudo-devices
274pseudo-device       bpfilter            # Berkeley packet filter
275pseudo-device       carp                          # Common Address Redundancy Protocol
276#pseudo-device      pppoe                         # PPP over Ethernet (RFC 2516)
277pseudo-device       bridge                        # simple inter-network bridging
278#pseudo-device      vether                        # Virtual Ethernet for bridge
279pseudo-device       loop                          # network loopback
280
281#
282# accept filters
283pseudo-device   accf_data               # "dataready" accept filter
284pseudo-device   accf_http               # "httpready" accept filter
285
286# miscellaneous pseudo-devices
287pseudo-device       pty                           # pseudo-terminals
288pseudo-device       clockctl            # user control of clock subsystem
289pseudo-device       drvctl                        # user control of drive subsystem
290pseudo-device       ksyms                         # /dev/ksyms
291#pseudo-device      npf                           # NPF packet filter
292pseudo-device       swwdog                        # software watchdog timer -- swwdog(4)
293
294# wscons pseudo-devices
295pseudo-device       wsmux                         # mouse & keyboard multiplexor
296#pseudo-device      wsfont
297
298#include "dev/veriexec.config"
299
300# Pull in optional local configuration - always at end
301cinclude  "arch/netwinder/conf/GENERIC.local"
302