1 /* $NetBSD: scsi_5380.h,v 1.6 2003/05/03 18:10:51 wiz Exp $ */ 2 3 /* 4 * Mach Operating System 5 * Copyright (c) 1991,1990,1989 Carnegie Mellon University 6 * All Rights Reserved. 7 * 8 * Permission to use, copy, modify and distribute this software and its 9 * documentation is hereby granted, provided that both the copyright 10 * notice and this permission notice appear in all copies of the 11 * software, derivative works or modified versions, and any portions 12 * thereof, and that both notices appear in supporting documentation. 13 * 14 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 15 * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR 16 * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. 17 * 18 * Carnegie Mellon requests users of this software to return to 19 * 20 * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU 21 * School of Computer Science 22 * Carnegie Mellon University 23 * Pittsburgh PA 15213-3890 24 * 25 * any improvements or extensions that they make and grant Carnegie the 26 * rights to redistribute these changes. 27 */ 28 /* 29 * File: scsi_5380.h 30 * Author: Alessandro Forin, Carnegie Mellon University 31 * Date: 5/91 32 * 33 * Defines for the NCR 5380 (SCSI chip), aka Am5380 34 */ 35 36 /* 37 * Register map 38 */ 39 40 typedef struct { 41 volatile unsigned char sci_data; /* r: Current data */ 42 #define sci_odata sci_data /* w: Out data */ 43 PAD(pad0); 44 45 volatile unsigned char sci_icmd; /* rw: Initiator command */ 46 PAD(pad1); 47 48 volatile unsigned char sci_mode; /* rw: Mode */ 49 PAD(pad2); 50 51 volatile unsigned char sci_tcmd; /* rw: Target command */ 52 PAD(pad3); 53 54 volatile unsigned char sci_bus_csr; /* r: Bus Status */ 55 #define sci_sel_enb sci_bus_csr /* w: Select enable */ 56 PAD(pad4); 57 58 volatile unsigned char sci_csr; /* r: Status */ 59 #define sci_dma_send sci_csr /* w: Start DMA send data */ 60 PAD(pad5); 61 62 volatile unsigned char sci_idata; /* r: Input data */ 63 #define sci_trecv sci_idata /* w: Start DMA receive, target */ 64 PAD(pad6); 65 66 volatile unsigned char sci_iack; /* r: Interrupt Acknowledge */ 67 #define sci_irecv sci_iack /* w: Start DMA receive, initiator */ 68 } sci_regmap_t; 69 70 71 /* 72 * Initiator command register 73 */ 74 75 #define SCI_ICMD_DATA 0x01 /* rw: Assert data bus */ 76 #define SCI_ICMD_ATN 0x02 /* rw: Assert ATN signal */ 77 #define SCI_ICMD_SEL 0x04 /* rw: Assert SEL signal */ 78 #define SCI_ICMD_BSY 0x08 /* rw: Assert BSY signal */ 79 #define SCI_ICMD_ACK 0x10 /* rw: Assert ACK signal */ 80 #define SCI_ICMD_LST 0x20 /* r: Lost arbitration */ 81 #define SCI_ICMD_DIFF SCI_ICMD_LST /* w: Differential cable */ 82 #define SCI_ICMD_AIP 0x40 /* r: Arbitration in progress */ 83 #define SCI_ICMD_TEST SCI_ICMD_AIP /* w: Test mode */ 84 #define SCI_ICMD_RST 0x80 /* rw: Assert RST signal */ 85 86 87 /* 88 * Mode register 89 */ 90 91 #define SCI_MODE_ARB 0x01 /* rw: Start arbitration */ 92 #define SCI_MODE_DMA 0x02 /* rw: Enable DMA xfers */ 93 #define SCI_MODE_MONBSY 0x04 /* rw: Monitor BSY signal */ 94 #define SCI_MODE_DMA_IE 0x08 /* rw: Enable DMA complete interrupt */ 95 #define SCI_MODE_PERR_IE 0x10 /* rw: Interrupt on parity errors */ 96 #define SCI_MODE_PAR_CHK 0x20 /* rw: Check parity */ 97 #define SCI_MODE_TARGET 0x40 /* rw: Target mode (Initiator if 0) */ 98 #define SCI_MODE_BLOCKDMA 0x80 /* rw: Block-mode DMA handshake (MBZ) */ 99 100 101 /* 102 * Target command register 103 */ 104 105 #define SCI_TCMD_IO 0x01 /* rw: Assert I/O signal */ 106 #define SCI_TCMD_CD 0x02 /* rw: Assert C/D signal */ 107 #define SCI_TCMD_MSG 0x04 /* rw: Assert MSG signal */ 108 #define SCI_TCMD_PHASE_MASK 0x07 /* r: Mask for current bus phase */ 109 #define SCI_TCMD_REQ 0x08 /* rw: Assert REQ signal */ 110 #define SCI_TCMD_LAST_SENT 0x80 /* ro: Last byte was xferred 111 * (not on 5380/1) */ 112 113 #define SCI_PHASE(x) SCSI_PHASE(x) 114 115 /* 116 * Current (SCSI) Bus status 117 */ 118 119 #define SCI_BUS_DBP 0x01 /* r: Data Bus parity */ 120 #define SCI_BUS_SEL 0x02 /* r: SEL signal */ 121 #define SCI_BUS_IO 0x04 /* r: I/O signal */ 122 #define SCI_BUS_CD 0x08 /* r: C/D signal */ 123 #define SCI_BUS_MSG 0x10 /* r: MSG signal */ 124 #define SCI_BUS_REQ 0x20 /* r: REQ signal */ 125 #define SCI_BUS_BSY 0x40 /* r: BSY signal */ 126 #define SCI_BUS_RST 0x80 /* r: RST signal */ 127 128 #define SCI_CUR_PHASE(x) SCSI_PHASE((x)>>2) 129 130 /* 131 * Bus and Status register 132 */ 133 134 #define SCI_CSR_ACK 0x01 /* r: ACK signal */ 135 #define SCI_CSR_ATN 0x02 /* r: ATN signal */ 136 #define SCI_CSR_DISC 0x04 /* r: Disconnected (BSY==0) */ 137 #define SCI_CSR_PHASE_MATCH 0x08 /* r: Bus and SCI_TCMD match */ 138 #define SCI_CSR_INT 0x10 /* r: Interrupt request */ 139 #define SCI_CSR_PERR 0x20 /* r: Parity error */ 140 #define SCI_CSR_DREQ 0x40 /* r: DMA request */ 141 #define SCI_CSR_DONE 0x80 /* r: DMA count is zero */ 142 143