1#         $NetBSD: OPENBLOCKS_AX3,v 1.36 2022/08/07 02:52:25 simonb Exp $
2#
3#         OPENBLOCKS_AX3 -- Plat'Home. OpenBlockS AX3 kernel
4#
5
6include   "arch/evbarm/conf/std.marvell"
7
8options   INCLUDE_CONFIG_FILE # embed config file in kernel binary
9
10# estimated number of users
11
12maxusers  32
13
14# Board Type
15makeoptions         BOARDTYPE="openblocks_ax3"
16options   EVBARM_BOARDTYPE=openblocks_ax3
17
18# CPU options
19options   CPU_PJ4B
20options   L2CACHE_ENABLE
21#options  AURORA_IO_CACHE_COHERENCY
22options   AURORA_L2_PT_WALK
23options   ARM_HAS_VBAR
24options   FPU_VFP
25makeoptions         CPUFLAGS="-march=armv7-a -mfpu=neon"
26
27# Architecture options
28options   ARMADAXP
29
30options   PIC_MAXSOURCES=128
31
32options   __HAVE_MM_MD_DIRECT_MAPPED_PHYS
33#options  MULTIPROCESSOR
34options   TPIDRPRW_IS_CURCPU
35
36makeoptions         KERNEL_BASE_VIRT="0x80008000"
37
38# Standard system options
39
40options   RTC_OFFSET=0        # hardware clock is this many mins. west of GMT
41options   NTP                 # NTP phase/frequency locked loop
42
43# File systems
44
45file-system         FFS                 # UFS
46file-system         EXT2FS              # second extended file system (linux)
47#file-system        LFS                 # log-structured file system
48#file-system        MFS                 # memory file system
49file-system         NFS                 # Network file system
50file-system         CD9660              # ISO 9660 + Rock Ridge file system
51file-system         MSDOSFS             # MS-DOS file system
52#file-system        FDESC               # /dev/fd
53file-system         KERNFS              # /kern
54file-system         NULLFS              # loopback file system
55file-system         PROCFS              # /proc
56file-system         PTYFS               # /dev/pts/N support
57#file-system        PUFFS               # Pass-to-Userspace Framework File System
58#file-system        UMAPFS              # NULLFS + uid and gid remapping
59file-system         UNION               # union file system
60file-system         TMPFS               # Efficient memory file-system
61
62# File system options
63options   FFS_EI              # FFS Endian Independent support
64#options  FFS_NO_SNAPSHOT     # No FFS snapshot support
65#options  QUOTA               # legacy UFS quotas
66#options  QUOTA2              # new, in-filesystem UFS quotas
67options   UFS_DIRHASH         # UFS Large Directory Hashing
68#options  UFS_EXTATTR         # Extended attribute support for UFS1
69options   WAPBL               # File system journaling support
70#options  DISKLABEL_EI        # disklabel Endian Independent support
71options   NFSSERVER # Network File System server
72
73# Networking options
74
75options   GATEWAY             # packet forwarding
76options   INET                # IP + ICMP + TCP + UDP
77options   INET6               # IPv6
78options   IPSEC               # IP security
79#options  IPSEC_DEBUG         # debug for IP security
80options   MROUTING  # IP multicast routing
81options   PIM                 # Protocol Independent Multicast
82options   NETATALK  # AppleTalk networking protocols
83options   PPP_BSDCOMP         # BSD-Compress compression support for PPP
84options   PPP_DEFLATE         # Deflate compression support for PPP
85options   PPP_FILTER          # Active filter support for PPP (requires bpf)
86#options  TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
87
88#options  NFS_BOOT_BOOTP
89options   NFS_BOOT_DHCP
90#options  NFS_BOOT_BOOTPARAM
91
92#options  NFS_BOOT_RWSIZE=1024
93
94# Compatibility options
95
96include   "conf/compat_netbsd50.config"
97options   COMPAT_NETBSD32     # allow running arm (e.g. non-earm) binaries
98
99# Shared memory options
100
101options   SYSVMSG             # System V-like message queues
102options   SYSVSEM             # System V-like semaphores
103#options  SEMMNI=10 # number of semaphore identifiers
104#options  SEMMNS=60 # number of semaphores in system
105#options  SEMUME=10 # max number of undo entries per process
106#options  SEMMNU=30 # number of undo structures in system
107options   SYSVSHM             # System V-like memory sharing
108
109# Device options
110
111#options  MEMORY_DISK_HOOKS   # boottime setup of ramdisk
112#options  MEMORY_DISK_IS_ROOT # use memory disk as root
113#options  MEMORY_DISK_DYNAMIC
114#options  MINIROOTSIZE=1000   # Size in blocks
115#options  MEMORY_DISK_ROOT_SIZE=22528   # Size in blocks
116#options  MEMORY_RBFLAGS=RB_AUTOBOOT
117
118# Miscellaneous kernel options
119
120#options  KTRACE              # system call tracing, a la ktrace(1)
121options   IRQSTATS  # manage IRQ statistics
122#options  MIIVERBOSE          # Verbose MII auto configuration messages
123#options  PCIVERBOSE          # Verbose PCI descriptions
124#options  SCSIVERBOSE         # Verbose SCSI errors
125options   USBVERBOSE          # Verbose USB device auto configuration messages
126#options  DDB_KEYCODE=0x40
127#options  USERCONF  # userconf(4) support
128#options  PIPE_SOCKETPAIR     # smaller, but slower pipe(2)
129#options  SYSCTL_INCLUDE_DESCR          # Include sysctl descriptions in kernel
130
131# Development and Debugging options
132
133options   DIAGNOSTIC          # internal consistency checks
134options   DEBUG
135#options  UVMHIST             # kernhist for uvm/pmap subsystems
136#options  VERBOSE_INIT_ARM # verbose bootstraping messages
137options   DDB                 # in-kernel debugger
138options   DDB_ONPANIC=1
139#options  DDB_HISTORY_SIZE=100          # Enable history editing in DDB
140#options  KGDB
141#options  DEBUG_KGDB
142makeoptions         DEBUG="-g"          # compile full symbol table
143makeoptions         COPY_SYMTAB=1
144
145config              netbsd              root on ? type ?
146
147# The main bus device
148mainbus0 at root
149
150# The boot cpu
151cpu0      at mainbus?
152
153# Marvell MV88F78260 ARMADA XP System-on-chip
154mvsoc0    at mainbus?
155options   MVSOC_INTERREGS_PBASE=0xd0000000
156options   MVSOC_FIXUP_DEVID=0x7826
157
158# On-chip Serial-ATA II Host Controller (SATAHC)
159mvsata* at mvsoc? offset ? irq ?
160
161# On-chip Gigabit Ethernet Controller Interface (backward compatible mode)
162mvgbec* at mvsoc? offset ?
163mvgbe*    at mvgbec? port ? irq ?
164
165# On-chip Gigabit Ethernet Controller Interface (counter mode)
166#mvxpbm*  at mvsoc? offset ?
167#mvxpe*   at mvsoc? irq ?
168#options  MVXPE_EVENT_COUNTERS
169#options  MVXPE_DEBUG=0
170
171makphy* at mii? phy ?
172
173# On-chip USB 2.0 Interface
174ehci*     at mvsoc? offset ? irq ?
175
176# Serial Peripheral Interface (SPI)
177#mvspi*   at mvsoc? offset ? irq ?
178#spi*     at mvspi?
179
180# On-chip Two-Wire Serial Interface (TWSI)
181gttwsi* at mvsoc? offset ? irq ?
182iic*      at gttwsi?
183s390rtc* at iic1 addr 0x30
184
185# On-chip Cryptographic Engines and Security Accelerator (DMA)
186#mvxpsec* at mvsoc? offset ? irq ?
187#options  MVXPSEC_DEBUG=MVXPSEC_DEBUG_ALL
188
189# On-chip UART Interface
190com*      at mvsoc? offset ? irq ?
191options   COM_16750           # XXXX: required
192#options  COM_DEBUG
193
194# On-chip PCI Express Interface
195mvpex*    at mvsoc? offset ? irq ?
196
197# On-chip IDMA Controller
198gtidmac* at mvsoc? offset ? irq ?
199
200# On-chip Thermal Sensor
201mvsocts* at mvsoc? offset ? irq ?
202
203# On-chip Timers
204mvsoctmr* at mvsoc? offset ? irq ?
205
206
207# PCI bus support
208options   PCI_NETBSD_CONFIGURE
209#options  PCI_CONFIG_DUMP     # verbosely dump PCI config space
210pci*      at mvpex?
211pchb*     at pci? dev ? function ?      # PCI-Host bridges
212
213#athn*    at pci? dev ? function ?      # Atheros AR9k (802.11a/g/n)
214
215# ATA (IDE) bus support
216atabus* at ata?
217#options  ATADEBUG
218
219# IDE drives
220wd*       at atabus? drive ? flags 0x0000
221
222# ATAPI bus support
223atapibus* at atapi?
224
225# ATAPI devices
226# flags have the same meaning as for IDE drives.
227cd*       at atapibus? drive ? flags 0x0000       # ATAPI CD-ROM drives
228sd*       at atapibus? drive ? flags 0x0000       # ATAPI disk drives
229
230# USB bus support
231usb*      at ehci?
232
233# USB Hubs
234uhub*     at usb?
235uhub*     at uhub? port ?
236
237# USB Mass Storage
238umass*    at uhub? port ? configuration ? interface ?
239scsibus* at scsi?
240sd*       at scsibus? target ? lun ?    # SCSI disk drives
241cd*       at scsibus? target ? lun ?    # SCSI CD-ROM drives
242
243# USB Generic driver
244ugen*     at uhub? port ?
245
246
247# Pseudo-Devices
248
249pseudo-device       crypto                        # /dev/crypto device
250pseudo-device       swcrypto            # software crypto implementation
251
252# disk/mass storage pseudo-devices
253#pseudo-device      bio                           # RAID control device driver
254#pseudo-device      ccd                           # concatenated/striped disk devices
255#pseudo-device      cgd                           # cryptographic disk devices
256#pseudo-device      raid                          # RAIDframe disk driver
257#options  RAID_AUTOCONFIG               # auto-configuration of RAID components
258# Options to enable various other RAIDframe RAID types.
259#options  RF_INCLUDE_EVENODD=1
260#options  RF_INCLUDE_RAID5_RS=1
261#options  RF_INCLUDE_PARITYLOGGING=1
262#options  RF_INCLUDE_CHAINDECLUSTER=1
263#options  RF_INCLUDE_INTERDECLUSTER=1
264#options  RF_INCLUDE_PARITY_DECLUSTERING=1
265#options  RF_INCLUDE_PARITY_DECLUSTERING_DS=1
266#pseudo-device      fss                           # file system snapshot device
267#pseudo-device      putter                        # for puffs and pud
268
269#pseudo-device      md                            # memory disk device (ramdisk)
270pseudo-device       vnd                           # disk-like interface to files
271options   VND_COMPRESSION               # compressed vnd(4)
272
273# network pseudo-devices
274pseudo-device       bpfilter            # Berkeley packet filter
275#pseudo-device      carp                          # Common Address Redundancy Protocol
276pseudo-device       npf                           # NPF packet filter
277pseudo-device       loop                          # network loopback
278pseudo-device       ppp                           # Point-to-Point Protocol
279pseudo-device       pppoe                         # PPP over Ethernet (RFC 2516)
280pseudo-device       sl                            # Serial Line IP
281#pseudo-device      irframetty                    # IrDA frame line discipline
282pseudo-device       tap                           # virtual Ethernet
283pseudo-device       tun                           # network tunneling over tty
284pseudo-device       gre                           # generic L3 over IP tunnel
285pseudo-device       gif                           # IPv[46] over IPv[46] tunnel (RFC 1933)
286pseudo-device       faith                         # IPv[46] TCP relay translation i/f
287pseudo-device       stf                           # 6to4 IPv6 over IPv4 encapsulation
288pseudo-device       vlan                          # IEEE 802.1q encapsulation
289pseudo-device       bridge                        # simple inter-network bridging
290pseudo-device       vether                        # Virtual Ethernet for bridge
291pseudo-device       agr                           # IEEE 802.3ad link aggregation
292
293# miscellaneous pseudo-devices
294pseudo-device       pty                           # pseudo-terminals
295#pseudo-device      sequencer           # MIDI sequencer
296#options  RND_COM
297pseudo-device       clockctl            # user control of clock subsystem
298pseudo-device       ksyms                         # /dev/ksyms
299
300# a pseudo device needed for Coda       # also needs CODA (above)
301#pseudo-device      vcoda                         # coda minicache <-> venus comm.
302
303# wscons pseudo-devices
304#pseudo-device      wsmux                         # mouse & keyboard multiplexor
305#pseudo-device      wsfont
306
307# data mover pseudo-devices
308pseudo-device       swdmover            # software dmover(9) back-end
309pseudo-device       dmoverio            # /dev/dmover dmover(9) interface
310
311# Veriexec
312# include "dev/veriexec.config"
313
314#options  PAX_MPROTECT=0                # PaX mprotect(2) restrictions
315#options  PAX_ASLR=0                    # PaX Address Space Layout Randomization
316