1# $NetBSD: RPC44,v 1.58 2024/01/29 18:27:10 christos Exp $
2#
3# GENERIC machine description file
4#
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include   "arch/arc/conf/std.arc"
22
23options   INCLUDE_CONFIG_FILE # embed config file in kernel binary
24
25#ident              "GENERIC-$Revision: 1.58 $"
26
27maxusers  32                  # estimated number of users
28
29# Platform support
30options   PLATFORM_DESKTECH_ARCSTATION_I          # DeskStation rPC44
31
32# Standard system options
33
34options   RTC_OFFSET=0        # hardware clock is this many mins. west of GMT
35options   NTP                 # NTP phase/frequency locked loop
36
37options   KTRACE              # system call tracing via ktrace(1)
38
39options   SYSVMSG             # System V-like message queues
40options   SYSVSEM             # System V-like semaphores
41#options  SEMMNI=10 # number of semaphore identifiers
42#options  SEMMNS=60 # number of semaphores in system
43#options  SEMUME=10 # max number of undo entries per process
44#options  SEMMNU=30 # number of undo structures in system
45options   SYSVSHM             # System V-like memory sharing
46
47options   USERCONF  # userconf(4) support
48#options  PIPE_SOCKETPAIR     # smaller, but slower pipe(2)
49options   SYSCTL_INCLUDE_DESCR          # Include sysctl descriptions in kernel
50
51# Alternate buffer queue strategies for better responsiveness under high
52# disk I/O load.
53#options  BUFQ_READPRIO
54#options  BUFQ_PRIOCSCAN
55
56# Diagnostic/debugging support options
57options   DIAGNOSTIC                    # cheap kernel consistency checks
58#options  DEBUG                         # expensive debugging checks/support
59options   DDB                           # in-kernel debugger
60pseudo-device       ksyms
61#options  DDB_HISTORY_SIZE=100          # enable history editing in DDB
62#options  KGDB                          # remote gdb
63#options  KGDB_DEVRATE=19200  # kernel gdb port rate (default 9600)
64#options  KGDB_DEV="17*256+0" # device for kernel gdb
65#makeoptions        DEBUG="-g"                    # compile full symbol table
66
67# Compatibility options
68include   "conf/compat_netbsd10.config"
69options   COMPAT_386BSD_MBRPART # recognize old partition ID
70
71# mipsel specific
72options   COMPAT_ULTRIX       # Ultrix binary compatibility
73options   EXEC_ECOFF          # Ultrix RISC binaries are ECOFF format
74
75# File systems
76file-system         FFS                 # fast filesystem
77#file-system        EXT2FS              # second extended file system (linux)
78#file-system        LFS                 # log-structured file system
79#file-system        MFS                 # memory file system
80#file-system        NTFS                # Windows/NT file system (experimental)
81file-system         CD9660              # ISO 9660 + Rock Ridge file system
82file-system         MSDOSFS             # MS-DOS file system
83file-system         NFS                 # Network File System client
84file-system         FDESC               # /dev/fd
85file-system         KERNFS              # /kern
86file-system         NULLFS              # loopback file system
87file-system         OVERLAY             # overlay file system
88file-system         PUFFS               # Userspace file systems (e.g. ntfs-3g & sshfs)
89file-system         PROCFS              # /proc
90file-system         UMAPFS              # NULLFS + uid and gid remapping
91file-system         UNION               # union file system
92#file-system        CODA                # Coda File System; also needs vcoda (below)
93file-system         PTYFS               # /dev/pts/N support
94
95# File system options
96options   QUOTA               # legacy UFS quotas
97options   QUOTA2              # new, in-filesystem UFS quotas
98#options  FFS_EI              # FFS Endian Independent support
99options   NFSSERVER # Network File System server
100#options  FFS_NO_SNAPSHOT     # No FFS snapshot support
101
102# Networking options
103#options  GATEWAY             # IP packet forwarding
104options   INET                # IP + ICMP + TCP + UDP
105#options  INET6               # IPV6
106#options  IPSEC               # IP security
107#options  IPSEC_DEBUG         # debug for IP security
108#options  MROUTING  # IP multicast routing
109#options  PIM                 # Protocol Independent Multicast
110#options  NETATALK  # AppleTalk networking protocols
111#options  PPP_BSDCOMP         # BSD-Compress compression support for PPP
112#options  PPP_DEFLATE         # Deflate compression support for PPP
113#options  PPP_FILTER          # Active filter support for PPP (requires bpf)
114#options  TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
115
116# JIT compiler for bpfilter
117#options  SLJIT
118#options  BPFJIT
119
120# These options enable verbose messages for several subsystems.
121# Warning, these may compile large string tables into the kernel!
122options   EISAVERBOSE         # verbose EISA device autoconfig messages
123#options  PCIVERBOSE          # verbose PCI device autoconfig messages
124#options  PCI_CONFIG_DUMP     # verbosely dump PCI config space
125options   SCSIVERBOSE         # human readable SCSI error messages
126
127# wscons terminal emulation
128options   WSEMUL_VT100        # VT100 emulation
129options   WSDISPLAY_COMPAT_USL                    # wsconscfg VT handling
130
131# Kernel root file system and dump configuration.
132options   NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
133config              netbsd    root on ? type ?
134#config             netbsd    root on sd0a type ffs
135#config             netbsd    root on ? type nfs
136
137#
138# Device configuration
139#
140
141mainbus0  at root
142cpu*                at mainbus0
143
144# PLATFORM_DESKTECH_ARCSTATION_I
145arcsisabr*          at mainbus0         # DeskStation rPC44 ISA host bridge.
146isa*                at arcsisabr?
147#isadma0  at isa?                       # bogus?
148timer0              at isa? port 0x40 irq 0
149mcclock0  at isa? port 0x70
150pc0                 at isa? irq 1                           # generic PC console device
151opms0               at isa? irq 12                          # PS/2 auxiliary port mouse
152vga0                at isa?
153pckbc0              at isa?                                 # PC keyboard controller
154com0                at isa? port 0x3f8 irq 4
155com1                at isa? port 0x2f8 irq 3
156com2                at isa? port 0x3e8 irq 4
157com3                at isa? port 0x2e8 irq 3
158#bha0               at isa? port 0x330 irq ? drq ?  # BusLogic [457]4X SCSI
159#ast0               at isa? port 0x1a0 irq 3      # AST 4-port serial cards
160#com*               at ast? slave ?
161
162# Joystick driver. Probe is a little strange; add only if you have one.
163#joy0               at isa? port 0x201
164
165# ISA ST506, ESDI, and IDE controllers
166# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
167# fall back to 16bits I/O if 32bits I/O are not functional).
168# Some controllers pass the initial 32bit test, but will fail later.
169# XXX - should be configured
170wdc0                at isa? port 0x1f0 irq 14 flags 0x00
171#wdc1               at isa? port 0x170 irq 15 flags 0x00
172#wdc*               at isapnp?
173
174# ISA parallel printer interfaces
175lpt0                at isa? port 0x378 irq 7
176
177# ISA network interfaces
178# XXX - should be configured
179#ec0                at isa? port 0x250 iomem 0xd8000 irq 9  # 3Com 3c503 Ethernet
180ep0                 at isa? port ? irq ?                    # 3C509 ethernet cards
181ne0                 at isa? port 0x280 irq 9      # NE[12]000 ethernet cards
182#ne1                at isa? port 0x300 irq 10
183#ne*                at isapnp?                              # NE[12]000 PnP ethernet
184we0                 at isa? port 0x280 iomem 0xd0000 irq 9  # WD/SMC Ethernet
185#we1                at isa? port 0x300 iomem 0xcc000 irq 10
186
187# XXX - should be configured
188#btl0               at isa? port 0x330 irq ? drq ?
189
190#### SCSI bus support
191#scsibus* at scsi?
192
193#### SCSI bus devices
194
195#sd*                at scsibus? target ? lun ?
196#st*                at scsibus? target ? lun ?
197#cd*                at scsibus? target ? lun ?
198#ch*                at scsibus? target ? lun ?
199#ss*                at scsibus? target ? lun ?
200#uk*                at scsibus? target ? lun ?
201
202# ATA (IDE) bus support
203atabus*   at wdc? channel ?
204
205# IDE drives
206# Flags are used only with controllers that support DMA operations
207# and mode settings (e.g. some pciide controllers)
208# The lowest order four bits (rightmost digit) of the flags define the PIO
209# mode to use, the next set of four bits the DMA mode and the third set the
210# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
211# to use, and the last bit must be 1 for this setting to be used.
212# For DMA and UDMA, 0xf (1111) means 'disable'.
213# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
214# (0xc=1100, 0xa=1010, 0xf=1111)
215# 0x0000 means "use whatever the drive claims to support".
216# XXX - should be configured
217wd*                 at atabus? drive ? flags 0x0000
218
219#### ATAPI bus support
220# XXX - should be configured
221#atapibus*          at atabus?
222
223#### ATAPI bus devices
224
225# flags have the same meaning as for IDE drives.
226#cd*                at atapibus? drive ? flags 0x0000       # ATAPI CD-ROM drives
227#sd*                at atapibus? drive ? flags 0x0000       # ATAPI disk drives
228#uk*                at atapibus? drive ? flags 0x0000       # ATAPI unknown
229
230#### Workstation Console attachments
231
232wsdisplay*          at vga?
233#wsdisplay*         at tga?
234pckbd*              at pckbc? # PC keyboard (kbd port)
235wskbd*              at pckbd?
236pms*                at pckbc? # PS/2-style mouse (aux port)
237wsmouse*  at pms?
238
239#### Pseudo devices
240
241# disk/mass storage pseudo-devices
242#pseudo-device      ccd                           # concatenated/striped disk devices
243#pseudo-device      cgd                           # cryptographic disk devices
244#pseudo-device      raid                          # RAIDframe disk driver
245# Options to enable various other RAIDframe RAID types.
246#options  RF_INCLUDE_EVENODD=1
247#options  RF_INCLUDE_RAID5_RS=1
248#options  RF_INCLUDE_PARITYLOGGING=1
249#options  RF_INCLUDE_CHAINDECLUSTER=1
250#options  RF_INCLUDE_INTERDECLUSTER=1
251#options  RF_INCLUDE_PARITY_DECLUSTERING=1
252#options  RF_INCLUDE_PARITY_DECLUSTERING_DS=1
253#pseudo-device      fss                           # file system snapshot device
254pseudo-device       md                            # memory disk device (ramdisk)
255pseudo-device       vnd                           # disk-like interface to files
256pseudo-device       putter                        # for puffs and pud
257
258# network pseudo-devices
259pseudo-device       bpfilter            # Berkeley packet filter
260#pseudo-device      npf                           # NPF packet filter
261pseudo-device       loop                          # network loopback
262#pseudo-device      ppp                           # Point-to-Point Protocol
263#pseudo-device      pppoe                         # PPP over Ethernet (RFC 2516)
264#pseudo-device      sl                            # Serial Line IP
265pseudo-device       tun                           # network tunneling over tty
266#pseudo-device      tap                           # virtual Ethernet
267#pseudo-device      gre                           # generic L3 over IP tunnel
268#pseudo-device      gif                           # IPv[46] over IPv[46] tunnel (RFC1933)
269#pseudo-device      faith                         # IPv[46] tcp relay translation i/f
270#pseudo-device      stf                           # 6to4 IPv6 over IPv4 encapsulation
271#pseudo-device      vlan                          # IEEE 802.1q encapsulation
272#pseudo-device      bridge                        # simple inter-network bridging
273#pseudo-device      vether                        # Virtual Ethernet for bridge
274
275# miscellaneous pseudo-devices
276pseudo-device       pty                           # pseudo-terminals
277#pseudo-device      sequencer           # MIDI sequencer
278# rnd works; RND_COM does not on port arc yet.
279#options  RND_COM                       # use "com" randomness as well (BROKEN)
280pseudo-device       clockctl            # user control of clock subsystem
281
282# a pseudo device needed for Coda       # also needs CODA (above)
283#pseudo-device      vcoda                         # coda minicache <-> venus comm.
284
285# mouse & keyboard multiplexor pseudo-devices
286pseudo-device       wsmux
287