1 /*	$OpenBSD: pciide_cmd_reg.h,v 1.9 2004/09/24 07:38:38 grange Exp $	*/
2 /*	$NetBSD: pciide_cmd_reg.h,v 1.9 2000/08/02 20:23:46 bouyer Exp $	*/
3 
4 /*
5  * Copyright (c) 1998 Manuel Bouyer.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *	This product includes software developed by Manuel Bouyer.
18  * 4. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  */
34 
35 #ifndef _DEV_PCI_PCIIDE_CMD_REG_H_
36 #define _DEV_PCI_PCIIDE_CMD_REG_H_
37 
38 /*
39  * Registers definitions for CMD Technologies's PCI 064x IDE controllers.
40  * Available from http://www.cmd.com/
41  */
42 
43 /* Interesting revision of the 0646 */
44 #define CMD0646U2_REV 0x05
45 #define CMD0646U_REV 0x03
46 
47 /* Configuration (RO) */
48 #define CMD_CONF 0x50
49 #define CMD_CONF_REV_MASK	0x03 /* 0640/3/6 only */
50 #define CMD_CONF_DRV0_INTR	0x04
51 #define CMD_CONF_DEVID		0x18 /* 0640/3/6 only */
52 #define CMD_CONF_VESAPRT	0x20 /* 0640/3/6 only */
53 #define CMD_CONF_DSA1		0x40
54 #define CMD_CONF_DSA0		0x80 /* 0640/3/6 only */
55 
56 /* Control register (RW) */
57 #define CMD_CTRL 0x51
58 #define CMD_CTRL_HR_FIFO		0x01 /* 0640/3/6 only */
59 #define CMD_CTRL_HW_FIFO		0x02 /* 0640/3/6 only */
60 #define CMD_CTRL_DEVSEL			0x04
61 #define CMD_CTRL_2PORT			0x08
62 #define CMD_CTRL_PAR			0x10 /* 0640/3/6 only */
63 #define CMD_CTRL_HW_HLD			0x20 /* 0640/3/6 only */
64 #define CMD_CTRL_DRV0_RAHEAD		0x40
65 #define CMD_CTRL_DRV1_RAHEAD		0x80
66 
67 /*
68  * data read/write timing registers . 0640 uses the same for drive 0 and 1
69  * on the secondary channel
70  */
71 #define CMD_DATA_TIM(chan, drive) \
72 	(((chan) == 0) ? \
73 		((drive) == 0) ? 0x54: 0x56 \
74 		: \
75 		((drive) == 0) ? 0x58 : 0x5b)
76 
77 /* secondary channel status and addr timings */
78 #define CMD_ARTTIM23	0x57
79 #define CMD_ARTTIM23_IRQ	0x10
80 #define CMD_ARTTIM23_RHAEAD(d)	((0x4) << (d))
81 
82 /* DMA master read mode select */
83 #define CMD_DMA_MODE 0x71
84 #define CMD_DMA_MASK		0x03
85 #define CMD_DMA			0x00
86 #define CMD_DMA_MULTIPLE	0x01
87 #define CMD_DMA_LINE		0x03
88 /* the followings bits are only for 0646U/646U2/648/649 */
89 #define CMD_DMA_IRQ(chan) 	(0x4 << (chan))
90 #define CMD_DMA_IRQ_DIS(chan) 	(0x10 << (chan))
91 #define CMD_DMA_RST		0x40
92 
93 /* the followings are only for 0646U/646U2/648/649 */
94 /* busmaster control/status register */
95 #define CMD_BICSR	0x79
96 #define CMD_BICSR_80(chan)	(0x01 << (chan))
97 /* Ultra/DMA timings reg */
98 #define CMD_UDMATIM(channel)	(0x73 + (8 * (channel)))
99 #define CMD_UDMATIM_UDMA(drive)	(0x01 << (drive))
100 #define CMD_UDMATIM_UDMA33(drive) (0x04 << (drive))
101 #define CMD_UDMATIM_TIM_MASK	0x3
102 #define CMD_UDMATIM_TIM_OFF(drive) (4 + ((drive) * 2))
103 static int8_t cmd0646_9_tim_udma[] = {0x03, 0x02, 0x01, 0x02, 0x01, 0x00};
104 
105 /*
106  * timings values for the 0643/6/8/9
107  * for all dma_mode we have to have
108  * DMA_timings(dma_mode) >= PIO_timings(dma_mode + 2)
109  */
110 static int8_t cmd0643_9_data_tim_pio[] = {0xA9, 0x57, 0x44, 0x32, 0x3F};
111 static int8_t cmd0643_9_data_tim_dma[] = {0x87, 0x32, 0x3F};
112 
113 #endif	/* !_DEV_PCI_PCIIDE_CMD_REG_H_ */
114