1 /* $Header: /p/tcsh/cvsroot/tcsh/sh.c,v 3.174 2011/11/29 18:38:54 christos Exp $ */
2 /*
3 * sh.c: Main shell routines
4 */
5 /*-
6 * Copyright (c) 1980, 1991 The Regents of the University of California.
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 */
33 #define EXTERN /* Intern */
34 #include "sh.h"
35
36 #ifndef lint
37 char copyright[] =
38 "@(#) Copyright (c) 1991 The Regents of the University of California.\n\
39 All rights reserved.\n";
40 #endif /* not lint */
41
42 RCSID("$tcsh: sh.c,v 3.174 2011/11/29 18:38:54 christos Exp $")
43
44 #include "tc.h"
45 #include "ed.h"
46 #include "tw.h"
47
48 extern int MapsAreInited;
49 extern int NLSMapsAreInited;
50
51 /*
52 * C Shell
53 *
54 * Bill Joy, UC Berkeley, California, USA
55 * October 1978, May 1980
56 *
57 * Jim Kulp, IIASA, Laxenburg, Austria
58 * April 1980
59 *
60 * Filename recognition added:
61 * Ken Greer, Ind. Consultant, Palo Alto CA
62 * October 1983.
63 *
64 * Karl Kleinpaste, Computer Consoles, Inc.
65 * Added precmd, periodic/tperiod, prompt changes,
66 * directory stack hack, and login watch.
67 * Sometime March 1983 - Feb 1984.
68 *
69 * Added scheduled commands, including the "sched" command,
70 * plus the call to sched_run near the precmd et al
71 * routines.
72 * Upgraded scheduled events for running events while
73 * sitting idle at command input.
74 *
75 * Paul Placeway, Ohio State
76 * added stuff for running with twenex/inputl 9 Oct 1984.
77 *
78 * ported to Apple Unix (TM) (OREO) 26 -- 29 Jun 1987
79 */
80
81 jmp_buf_t reslab;
82
83 static const char tcshstr[] = "tcsh";
84
85 struct sigaction parintr; /* Parents interrupt catch */
86 struct sigaction parterm; /* Parents terminate catch */
87
88 #ifdef TESLA
89 int do_logout = 0;
90 #endif /* TESLA */
91
92
93 int use_fork = 0; /* use fork() instead of vfork()? */
94
95 /*
96 * Magic pointer values. Used to specify other invalid conditions aside
97 * from null.
98 */
99 static Char INVCHAR;
100 Char *INVPTR = &INVCHAR;
101 Char **INVPPTR = &INVPTR;
102
103 static int fast = 0;
104 static int mflag = 0;
105 static int prompt = 1;
106 int enterhist = 0;
107 int tellwhat = 0;
108 time_t t_period;
109 Char *ffile = NULL;
110 int dolzero = 0;
111 int insource = 0;
112 int exitset = 0;
113 static time_t chktim; /* Time mail last checked */
114 char *progname;
115 int tcsh;
116
117 /*
118 * This preserves the input state of the shell. It is used by
119 * st_save and st_restore to manupulate shell state.
120 */
121 struct saved_state {
122 int insource;
123 int OLDSTD;
124 int SHIN;
125 int SHOUT;
126 int SHDIAG;
127 int intty;
128 struct whyle *whyles;
129 Char *gointr;
130 Char *arginp;
131 Char *evalp;
132 Char **evalvec;
133 Char *alvecp;
134 Char **alvec;
135 int onelflg;
136 int enterhist;
137 Char **argv;
138 Char **av;
139 Char HIST;
140 int cantell;
141 struct Bin B;
142 int justpr;
143 };
144
145 static int srccat (Char *, Char *);
146 #ifndef WINNT_NATIVE
147 static int srcfile (const char *, int, int, Char **);
148 #else
149 int srcfile (const char *, int, int, Char **);
150 #endif /*WINNT_NATIVE*/
151 static void srcunit (int, int, int, Char **);
152 static void mailchk (void);
153 #ifndef _PATH_DEFPATH
154 static Char **defaultpath (void);
155 #endif
156 static void record (void);
157 static void st_save (struct saved_state *, int, int,
158 Char **, Char **);
159 static void st_restore (void *);
160
161 int main (int, char **);
162
163 #ifndef LOCALEDIR
164 #define LOCALEDIR "/usr/share/locale"
165 #endif
166
167 #ifdef NLS_CATALOGS
168 static void
add_localedir_to_nlspath(const char * path)169 add_localedir_to_nlspath(const char *path)
170 {
171 static const char msgs_LOC[] = "/%L/LC_MESSAGES/%N.cat";
172 static const char msgs_lang[] = "/%l/LC_MESSAGES/%N.cat";
173 char *old;
174 char *new, *new_p;
175 size_t len;
176 int add_LOC = 1;
177 int add_lang = 1;
178 char trypath[MAXPATHLEN];
179 struct stat st;
180
181 if (path == NULL)
182 return;
183
184 (void) xsnprintf(trypath, sizeof(trypath), "%s/en/LC_MESSAGES/tcsh.cat",
185 path);
186 if (stat(trypath, &st) == -1)
187 return;
188
189 if ((old = getenv("NLSPATH")) != NULL)
190 len = strlen(old) + 1; /* don't forget the colon. */
191 else
192 len = 0;
193
194 len += 2 * strlen(path) +
195 sizeof(msgs_LOC) + sizeof(msgs_lang); /* includes the extra colon */
196
197 new = new_p = xcalloc(len, 1);
198
199 if (old != NULL) {
200 size_t pathlen = strlen(path);
201 char *old_p;
202
203 (void) xsnprintf(new_p, len, "%s", old);
204 new_p += strlen(new_p);
205 len -= new_p - new;
206
207 /* Check if the paths we try to add are already present in NLSPATH.
208 If so, note it by setting the appropriate flag to 0. */
209 for (old_p = old; old_p; old_p = strchr(old_p, ':'),
210 old_p = old_p ? old_p + 1 : NULL) {
211 if (strncmp(old_p, path, pathlen) != 0)
212 continue;
213 if (strncmp(old_p + pathlen, msgs_LOC, sizeof(msgs_LOC) - 1) == 0)
214 add_LOC = 0;
215 else if (strncmp(old_p + pathlen, msgs_lang,
216 sizeof(msgs_lang) - 1) == 0)
217 add_lang = 0;
218 }
219 }
220
221 /* Add the message catalog paths not already present to NLSPATH. */
222 if (add_LOC || add_lang)
223 (void) xsnprintf(new_p, len, "%s%s%s%s%s%s",
224 old ? ":" : "",
225 add_LOC ? path : "", add_LOC ? msgs_LOC : "",
226 add_LOC && add_lang ? ":" : "",
227 add_lang ? path : "", add_lang ? msgs_lang : "");
228
229 tsetenv(STRNLSPATH, str2short(new));
230 free(new);
231 }
232 #endif
233
234 int
main(int argc,char ** argv)235 main(int argc, char **argv)
236 {
237 int batch = 0;
238 volatile int nexececho = 0;
239 int nofile = 0;
240 volatile int nverbose = 0;
241 volatile int rdirs = 0;
242 int quitit = 0;
243 Char *cp;
244 #ifdef AUTOLOGOUT
245 Char *cp2;
246 #endif
247 char *tcp, *ttyn;
248 int f, reenter;
249 char **tempv;
250 int osetintr;
251 struct sigaction oparintr;
252
253 (void)memset(&reslab, 0, sizeof(reslab));
254 #ifdef WINNT_NATIVE
255 nt_init();
256 #endif /* WINNT_NATIVE */
257 #if defined(NLS_CATALOGS) && defined(LC_MESSAGES)
258 (void) setlocale(LC_MESSAGES, "");
259 #endif /* NLS_CATALOGS && LC_MESSAGES */
260
261 #ifdef NLS
262 # ifdef LC_CTYPE
263 (void) setlocale(LC_CTYPE, ""); /* for iscntrl */
264 # endif /* LC_CTYPE */
265 #endif /* NLS */
266
267 STR_environ = blk2short(environ);
268 environ = short2blk(STR_environ); /* So that we can free it */
269
270 #ifdef NLS_CATALOGS
271 add_localedir_to_nlspath(LOCALEDIR);
272 #endif
273
274 nlsinit();
275
276 #ifdef MALLOC_TRACE
277 mal_setstatsfile(fdopen(dmove(xopen("/tmp/tcsh.trace",
278 O_WRONLY|O_CREAT|O_LARGEFILE, 0666), 25), "w"));
279 mal_trace(1);
280 #endif /* MALLOC_TRACE */
281
282 #if !(defined(BSDTIMES) || defined(_SEQUENT_)) && defined(POSIX)
283 # ifdef _SC_CLK_TCK
284 clk_tck = (clock_t) sysconf(_SC_CLK_TCK);
285 # else /* ! _SC_CLK_TCK */
286 # ifdef CLK_TCK
287 clk_tck = CLK_TCK;
288 # else /* !CLK_TCK */
289 clk_tck = HZ;
290 # endif /* CLK_TCK */
291 # endif /* _SC_CLK_TCK */
292 #endif /* !BSDTIMES && POSIX */
293
294 settimes(); /* Immed. estab. timing base */
295 #ifdef TESLA
296 do_logout = 0;
297 #endif /* TESLA */
298
299 /*
300 * Make sure we have 0, 1, 2 open
301 * Otherwise `` jobs will not work... (From knaff@poly.polytechnique.fr)
302 */
303 {
304 do
305 if ((f = xopen(_PATH_DEVNULL, O_RDONLY|O_LARGEFILE)) == -1 &&
306 (f = xopen("/", O_RDONLY|O_LARGEFILE)) == -1)
307 exit(1);
308 while (f < 3);
309 xclose(f);
310 }
311
312 osinit(); /* Os dependent initialization */
313
314
315 {
316 char *t;
317
318 t = strrchr(argv[0], '/');
319 #ifdef WINNT_NATIVE
320 {
321 char *s = strrchr(argv[0], '\\');
322 if (s)
323 t = s;
324 }
325 #endif /* WINNT_NATIVE */
326 t = t ? t + 1 : argv[0];
327 if (*t == '-') t++;
328 progname = strsave((t && *t) ? t : tcshstr); /* never want a null */
329 tcsh = strncmp(progname, tcshstr, sizeof(tcshstr) - 1) == 0;
330 }
331
332 /*
333 * Initialize non constant strings
334 */
335 #ifdef _PATH_BSHELL
336 STR_BSHELL = SAVE(_PATH_BSHELL);
337 #endif
338 #ifdef _PATH_TCSHELL
339 STR_SHELLPATH = SAVE(_PATH_TCSHELL);
340 #else
341 # ifdef _PATH_CSHELL
342 STR_SHELLPATH = SAVE(_PATH_CSHELL);
343 # endif
344 #endif
345 STR_WORD_CHARS = SAVE(WORD_CHARS);
346
347 HIST = '!';
348 HISTSUB = '^';
349 PRCH = tcsh ? '>' : '%'; /* to replace %# in $prompt for normal users */
350 PRCHROOT = '#'; /* likewise for root */
351 word_chars = STR_WORD_CHARS;
352 bslash_quote = 0; /* PWP: do tcsh-style backslash quoting? */
353 anyerror = 1; /* for compatibility */
354 setcopy(STRanyerror, STRNULL, VAR_READWRITE);
355
356 /* Default history size to 100 */
357 setcopy(STRhistory, str2short("100"), VAR_READWRITE);
358
359 tempv = argv;
360 ffile = SAVE(tempv[0]);
361 dolzero = 0;
362 if (eq(ffile, STRaout)) /* A.out's are quittable */
363 quitit = 1;
364 uid = getuid();
365 gid = getgid();
366 euid = geteuid();
367 egid = getegid();
368 /*
369 * We are a login shell if: 1. we were invoked as -<something> with
370 * optional arguments 2. or we were invoked only with the -l flag
371 */
372 loginsh = (**tempv == '-') || (argc == 2 &&
373 tempv[1][0] == '-' && tempv[1][1] == 'l' &&
374 tempv[1][2] == '\0');
375 #ifdef _VMS_POSIX
376 /* No better way to find if we are a login shell */
377 if (!loginsh) {
378 loginsh = (argc == 1 && getppid() == 1);
379 **tempv = '-'; /* Avoid giving VMS an acidic stomach */
380 }
381 #endif /* _VMS_POSIX */
382
383 if (loginsh && **tempv != '-') {
384 char *argv0;
385
386 /*
387 * Mangle the argv space
388 */
389 tempv[1][0] = '\0';
390 tempv[1][1] = '\0';
391 tempv[1] = NULL;
392 argv0 = strspl("-", *tempv);
393 *tempv = argv0;
394 argc--;
395 }
396 if (loginsh) {
397 (void) time(&chktim);
398 setNS(STRloginsh);
399 }
400
401 NoNLSRebind = getenv("NOREBIND") != NULL;
402 #ifdef NLS
403 # ifdef SETLOCALEBUG
404 dont_free = 1;
405 # endif /* SETLOCALEBUG */
406 (void) setlocale(LC_ALL, "");
407 # ifdef LC_COLLATE
408 (void) setlocale(LC_COLLATE, "");
409 # endif
410 # ifdef SETLOCALEBUG
411 dont_free = 0;
412 # endif /* SETLOCALEBUG */
413 # ifdef STRCOLLBUG
414 fix_strcoll_bug();
415 # endif /* STRCOLLBUG */
416
417 /*
418 * On solaris ISO8859-1 contains no printable characters in the upper half
419 * so we need to test only for MB_CUR_MAX == 1, otherwise for multi-byte
420 * locales we are always AsciiOnly == 0.
421 */
422 if (MB_CUR_MAX == 1) {
423 int k;
424
425 for (k = 0200; k <= 0377 && !isprint(CTL_ESC(k)); k++)
426 continue;
427 AsciiOnly = k > 0377;
428 } else
429 AsciiOnly = 0;
430 #else
431 AsciiOnly = getenv("LANG") == NULL && getenv("LC_CTYPE") == NULL;
432 #endif /* NLS */
433 if (MapsAreInited && !NLSMapsAreInited)
434 ed_InitNLSMaps();
435 ResetArrowKeys();
436
437 /*
438 * Initialize for periodic command intervals. Also, initialize the dummy
439 * tty list for login-watch.
440 */
441 (void) time(&t_period);
442 #ifndef HAVENOUTMP
443 initwatch();
444 #endif /* !HAVENOUTMP */
445
446 #if defined(alliant)
447 /*
448 * From: Jim Pace <jdp@research.att.com>
449 * tcsh does not work properly on the alliants through an rlogin session.
450 * The shell generally hangs. Also, reference to the controlling terminal
451 * does not work ( ie: echo foo > /dev/tty ).
452 *
453 * A security feature was added to rlogind affecting FX/80's Concentrix
454 * from revision 5.5.xx upwards (through 5.7 where this fix was implemented)
455 * This security change also affects the FX/2800 series.
456 * The security change to rlogind requires the process group of an rlogin
457 * session become disassociated with the tty in rlogind.
458 *
459 * The changes needed are:
460 * 1. set the process group
461 * 2. reenable the control terminal
462 */
463 if (loginsh && isatty(SHIN)) {
464 ttyn = ttyname(SHIN);
465 xclose(SHIN);
466 SHIN = xopen(ttyn, O_RDWR|O_LARGEFILE);
467 shpgrp = getpid();
468 (void) ioctl (SHIN, TIOCSPGRP, (ioctl_t) &shpgrp);
469 (void) setpgid(0, shpgrp);
470 }
471 #endif /* alliant */
472
473 /*
474 * Move the descriptors to safe places. The variable didfds is 0 while we
475 * have only FSH* to work with. When didfds is true, we have 0,1,2 and
476 * prefer to use these.
477 */
478 initdesc();
479
480 /*
481 * Get and set the tty now
482 */
483 if ((ttyn = ttyname(SHIN)) != NULL) {
484 /*
485 * Could use rindex to get rid of other possible path components, but
486 * hpux preserves the subdirectory /pty/ when storing the tty name in
487 * utmp, so we keep it too.
488 */
489 if (strncmp(ttyn, "/dev/", 5) == 0)
490 setv(STRtty, cp = SAVE(ttyn + 5), VAR_READWRITE);
491 else
492 setv(STRtty, cp = SAVE(ttyn), VAR_READWRITE);
493 }
494 else
495 setv(STRtty, cp = SAVE(""), VAR_READWRITE);
496 /*
497 * Initialize the shell variables. ARGV and PROMPT are initialized later.
498 * STATUS is also munged in several places. CHILD is munged when
499 * forking/waiting
500 */
501
502 /*
503 * 7-10-87 Paul Placeway autologout should be set ONLY on login shells and
504 * on shells running as root. Out of these, autologout should NOT be set
505 * for any psudo-terminals (this catches most window systems) and not for
506 * any terminal running X windows.
507 *
508 * At Ohio State, we have had problems with a user having his X session
509 * drop out from under him (on a Sun) because the shell in his master
510 * xterm timed out and exited.
511 *
512 * Really, this should be done with a program external to the shell, that
513 * watches for no activity (and NO running programs, such as dump) on a
514 * terminal for a long peroid of time, and then SIGHUPS the shell on that
515 * terminal.
516 *
517 * bugfix by Rich Salz <rsalz@PINEAPPLE.BBN.COM>: For root rsh things
518 * allways first check to see if loginsh or really root, then do things
519 * with ttyname()
520 *
521 * Also by Jean-Francois Lamy <lamy%ai.toronto.edu@RELAY.CS.NET>: check the
522 * value of cp before using it! ("root can rsh too")
523 *
524 * PWP: keep the nested ifs; the order of the tests matters and a good
525 * (smart) C compiler might re-arange things wrong.
526 */
527 #ifdef AUTOLOGOUT
528 # ifdef convex
529 if (uid == 0)
530 /* root always has a 15 minute autologout */
531 setcopy(STRautologout, STRrootdefautologout, VAR_READWRITE);
532 else
533 if (loginsh)
534 /* users get autologout set to 0 */
535 setcopy(STRautologout, STR0, VAR_READWRITE);
536 # else /* convex */
537 if (loginsh || (uid == 0)) {
538 if (*cp) {
539 /* only for login shells or root and we must have a tty */
540 if (((cp2 = Strrchr(cp, (Char) '/')) != NULL) &&
541 (Strncmp(cp, STRptssl, 3) != 0)) {
542 cp2 = cp2 + 1;
543 }
544 else
545 cp2 = cp;
546 if (!(((Strncmp(cp2, STRtty, 3) == 0) && Isalpha(cp2[3])) ||
547 Strstr(cp, STRptssl) != NULL)) {
548 if (getenv("DISPLAY") == NULL) {
549 /* NOT on X window shells */
550 setcopy(STRautologout, STRdefautologout, VAR_READWRITE);
551 }
552 }
553 }
554 }
555 # endif /* convex */
556 #endif /* AUTOLOGOUT */
557
558 sigset_interrupting(SIGALRM, queue_alrmcatch);
559
560 setcopy(STRstatus, STR0, VAR_READWRITE);
561
562 /*
563 * get and set machine specific environment variables
564 */
565 getmachine();
566
567
568 /*
569 * Publish the selected echo style
570 */
571 #if ECHO_STYLE != BSD_ECHO
572 if (tcsh) {
573 # if ECHO_STYLE == NONE_ECHO
574 setcopy(STRecho_style, STRnone, VAR_READWRITE);
575 # endif /* ECHO_STYLE == NONE_ECHO */
576 # if ECHO_STYLE == SYSV_ECHO
577 setcopy(STRecho_style, STRsysv, VAR_READWRITE);
578 # endif /* ECHO_STYLE == SYSV_ECHO */
579 # if ECHO_STYLE == BOTH_ECHO
580 setcopy(STRecho_style, STRboth, VAR_READWRITE);
581 # endif /* ECHO_STYLE == BOTH_ECHO */
582 } else
583 #endif /* ECHO_STYLE != BSD_ECHO */
584 setcopy(STRecho_style, STRbsd, VAR_READWRITE);
585
586 /*
587 * increment the shell level.
588 */
589 shlvl(1);
590
591 if ((tcp = getenv("HOME")) != NULL)
592 cp = quote(SAVE(tcp));
593 else
594 #ifdef __ANDROID__
595 /* On Android, $HOME usually isn't set, so we can't load user RC files.
596 Check for the environment variable EXTERNAL_STORAGE, which contains
597 the mount point of the external storage (SD card, mostly). If
598 EXTERNAL_STORAGE isn't set fall back to "/sdcard". */
599 if ((tcp = getenv("EXTERNAL_STORAGE")) != NULL)
600 cp = quote(SAVE(tcp));
601 else
602 cp = quote(SAVE("/sdcard"));
603 #else
604 cp = NULL;
605 #endif
606
607 if (cp == NULL)
608 fast = 1; /* No home -> can't read scripts */
609 else
610 setv(STRhome, cp, VAR_READWRITE);
611
612 dinit(cp); /* dinit thinks that HOME == cwd in a login
613 * shell */
614 /*
615 * Grab other useful things from the environment. Should we grab
616 * everything??
617 */
618 {
619 char *cln, *cus, *cgr;
620 struct passwd *pw;
621 struct group *gr;
622
623
624 #ifdef apollo
625 int oid = getoid();
626
627 setv(STRoid, Itoa(oid, 0, 0), VAR_READWRITE);
628 #endif /* apollo */
629
630 setv(STReuid, Itoa(euid, 0, 0), VAR_READWRITE);
631 if ((pw = xgetpwuid(euid)) == NULL)
632 setcopy(STReuser, STRunknown, VAR_READWRITE);
633 else
634 setcopy(STReuser, str2short(pw->pw_name), VAR_READWRITE);
635
636 setv(STRuid, Itoa(uid, 0, 0), VAR_READWRITE);
637
638 setv(STRgid, Itoa(gid, 0, 0), VAR_READWRITE);
639
640 cln = getenv("LOGNAME");
641 cus = getenv("USER");
642 if (cus != NULL)
643 setv(STRuser, quote(SAVE(cus)), VAR_READWRITE);
644 else if (cln != NULL)
645 setv(STRuser, quote(SAVE(cln)), VAR_READWRITE);
646 else if ((pw = xgetpwuid(uid)) == NULL)
647 setcopy(STRuser, STRunknown, VAR_READWRITE);
648 else
649 setcopy(STRuser, str2short(pw->pw_name), VAR_READWRITE);
650 if (cln == NULL)
651 tsetenv(STRLOGNAME, varval(STRuser));
652 if (cus == NULL)
653 tsetenv(STRKUSER, varval(STRuser));
654
655 cgr = getenv("GROUP");
656 if (cgr != NULL)
657 setv(STRgroup, quote(SAVE(cgr)), VAR_READWRITE);
658 else if ((gr = xgetgrgid(gid)) == NULL)
659 setcopy(STRgroup, STRunknown, VAR_READWRITE);
660 else
661 setcopy(STRgroup, str2short(gr->gr_name), VAR_READWRITE);
662 if (cgr == NULL)
663 tsetenv(STRKGROUP, varval(STRgroup));
664 }
665
666 /*
667 * HOST may be wrong, since rexd transports the entire environment on sun
668 * 3.x Just set it again
669 */
670 {
671 char cbuff[MAXHOSTNAMELEN];
672
673 if (gethostname(cbuff, sizeof(cbuff)) >= 0) {
674 cbuff[sizeof(cbuff) - 1] = '\0'; /* just in case */
675 tsetenv(STRHOST, str2short(cbuff));
676 }
677 else
678 tsetenv(STRHOST, STRunknown);
679 }
680
681
682 #ifdef REMOTEHOST
683 /*
684 * Try to determine the remote host we were logged in from.
685 */
686 remotehost();
687 #endif /* REMOTEHOST */
688
689 #ifdef apollo
690 if ((tcp = getenv("SYSTYPE")) == NULL)
691 tcp = "bsd4.3";
692 tsetenv(STRSYSTYPE, quote(str2short(tcp)));
693 #endif /* apollo */
694
695 /*
696 * set editing on by default, unless running under Emacs as an inferior
697 * shell.
698 * We try to do this intelligently. If $TERM is available, then it
699 * should determine if we should edit or not. $TERM is preserved
700 * across rlogin sessions, so we will not get confused if we rlogin
701 * under an emacs shell. Another advantage is that if we run an
702 * xterm under an emacs shell, then the $TERM will be set to
703 * xterm, so we are going to want to edit. Unfortunately emacs
704 * does not restore all the tty modes, so xterm is not very well
705 * set up. But this is not the shell's fault.
706 * Also don't edit if $TERM == wm, for when we're running under an ATK app.
707 * Finally, emacs compiled under terminfo, sets the terminal to dumb,
708 * so disable editing for that too.
709 *
710 * Unfortunately, in some cases the initial $TERM setting is "unknown",
711 * "dumb", or "network" which is then changed in the user's startup files.
712 * We fix this by setting noediting here if $TERM is unknown/dumb and
713 * if noediting is set, we switch on editing if $TERM is changed.
714 */
715 if ((tcp = getenv("TERM")) != NULL) {
716 setv(STRterm, quote(SAVE(tcp)), VAR_READWRITE);
717 noediting = strcmp(tcp, "unknown") == 0 || strcmp(tcp, "dumb") == 0 ||
718 strcmp(tcp, "network") == 0;
719 editing = strcmp(tcp, "emacs") != 0 && strcmp(tcp, "wm") != 0 &&
720 !noediting;
721 }
722 else {
723 noediting = 0;
724 editing = ((tcp = getenv("EMACS")) == NULL || strcmp(tcp, "t") != 0);
725 }
726
727 /*
728 * The 'edit' variable is either set or unset. It doesn't
729 * need a value. Making it 'emacs' might be confusing.
730 */
731 if (editing)
732 setNS(STRedit);
733
734
735 /*
736 * still more mutability: make the complete routine automatically add the
737 * suffix of file names...
738 */
739 setNS(STRaddsuffix);
740
741 /*
742 * Compatibility with tcsh >= 6.12 by default
743 */
744 setNS(STRcsubstnonl);
745
746 /*
747 * Random default kill ring size
748 */
749 setcopy(STRkillring, str2short("30"), VAR_READWRITE);
750
751 /*
752 * Re-initialize path if set in environment
753 */
754 if ((tcp = getenv("PATH")) == NULL)
755 #ifdef _PATH_DEFPATH
756 importpath(str2short(_PATH_DEFPATH));
757 #else /* !_PATH_DEFPATH */
758 setq(STRpath, defaultpath(), &shvhed, VAR_READWRITE);
759 #endif /* _PATH_DEFPATH */
760 else
761 /* Importpath() allocates memory for the path, and the
762 * returned pointer from SAVE() was discarded, so
763 * this was a memory leak.. (sg)
764 *
765 * importpath(SAVE(tcp));
766 */
767 importpath(str2short(tcp));
768
769
770 {
771 /* If the SHELL environment variable ends with "tcsh", set
772 * STRshell to the same path. This is to facilitate using
773 * the executable in environments where the compiled-in
774 * default isn't appropriate (sg).
775 */
776
777 size_t sh_len = 0;
778
779 if ((tcp = getenv("SHELL")) != NULL) {
780 sh_len = strlen(tcp);
781 if ((sh_len >= 5 && strcmp(tcp + (sh_len - 5), "/tcsh") == 0) ||
782 (!tcsh && sh_len >= 4 && strcmp(tcp + (sh_len - 4), "/csh") == 0))
783 setv(STRshell, quote(SAVE(tcp)), VAR_READWRITE);
784 else
785 sh_len = 0;
786 }
787 if (sh_len == 0)
788 setcopy(STRshell, STR_SHELLPATH, VAR_READWRITE);
789 }
790
791 #ifdef _OSD_POSIX /* BS2000 needs this variable set to "SHELL" */
792 if ((tcp = getenv("PROGRAM_ENVIRONMENT")) == NULL)
793 tcp = "SHELL";
794 tsetenv(STRPROGRAM_ENVIRONMENT, quote(str2short(tcp)));
795 #endif /* _OSD_POSIX */
796
797 #ifdef COLOR_LS_F
798 if ((tcp = getenv("LS_COLORS")) != NULL)
799 parseLS_COLORS(str2short(tcp));
800 #endif /* COLOR_LS_F */
801
802 doldol = putn((tcsh_number_t)getpid()); /* For $$ */
803 #ifdef WINNT_NATIVE
804 {
805 char *tmp;
806 Char *tmp2;
807 if ((tmp = getenv("TMP")) != NULL) {
808 tmp = xasprintf("%s/%s", tmp, "sh");
809 tmp2 = SAVE(tmp);
810 xfree(tmp);
811 }
812 else {
813 tmp2 = SAVE("");
814 }
815 shtemp = Strspl(tmp2, doldol); /* For << */
816 xfree(tmp2);
817 }
818 #else /* !WINNT_NATIVE */
819 #ifdef HAVE_MKSTEMP
820 {
821 char *tmpdir = getenv ("TMPDIR");
822 if (!tmpdir)
823 tmpdir = "/tmp";
824 shtemp = Strspl(SAVE(tmpdir), SAVE("/sh" TMP_TEMPLATE)); /* For << */
825 }
826 #else /* !HAVE_MKSTEMP */
827 shtemp = Strspl(STRtmpsh, doldol); /* For << */
828 #endif /* HAVE_MKSTEMP */
829 #endif /* WINNT_NATIVE */
830
831 /*
832 * Record the interrupt states from the parent process. If the parent is
833 * non-interruptible our hand must be forced or we (and our children) won't
834 * be either. Our children inherit termination from our parent. We catch it
835 * only if we are the login shell.
836 */
837 sigaction(SIGINT, NULL, &parintr);
838 sigaction(SIGTERM, NULL, &parterm);
839
840
841 #ifdef TCF
842 /* Enable process migration on ourselves and our progeny */
843 (void) signal(SIGMIGRATE, SIG_DFL);
844 #endif /* TCF */
845
846 /*
847 * dspkanji/dspmbyte autosetting
848 */
849 /* PATCH IDEA FROM Issei.Suzuki VERY THANKS */
850 #if defined(DSPMBYTE)
851 #if defined(NLS) && defined(LC_CTYPE)
852 if (((tcp = setlocale(LC_CTYPE, NULL)) != NULL || (tcp = getenv("LANG")) != NULL) && !adrof(CHECK_MBYTEVAR))
853 #else
854 if ((tcp = getenv("LANG")) != NULL && !adrof(CHECK_MBYTEVAR))
855 #endif
856 {
857 autoset_dspmbyte(str2short(tcp));
858 }
859 #if defined(WINNT_NATIVE)
860 else if (!adrof(CHECK_MBYTEVAR))
861 nt_autoset_dspmbyte();
862 #endif /* WINNT_NATIVE */
863 #endif
864 #if defined(AUTOSET_KANJI)
865 # if defined(NLS) && defined(LC_CTYPE)
866 if (setlocale(LC_CTYPE, NULL) != NULL || getenv("LANG") != NULL)
867 # else
868 if (getenv("LANG") != NULL)
869 # endif
870 autoset_kanji();
871 #endif /* AUTOSET_KANJI */
872 fix_version(); /* publish the shell version */
873
874 if (argc > 1 && strcmp(argv[1], "--version") == 0) {
875 xprintf("%S\n", varval(STRversion));
876 xexit(0);
877 }
878 if (argc > 1 && strcmp(argv[1], "--help") == 0) {
879 xprintf("%S\n\n", varval(STRversion));
880 xprintf("%s", CGETS(11, 8, HELP_STRING));
881 xexit(0);
882 }
883 /*
884 * Process the arguments.
885 *
886 * Note that processing of -v/-x is actually delayed till after script
887 * processing.
888 *
889 * We set the first character of our name to be '-' if we are a shell
890 * running interruptible commands. Many programs which examine ps'es
891 * use this to filter such shells out.
892 */
893 argc--, tempv++;
894 while (argc > 0 && (tcp = tempv[0])[0] == '-' &&
895 *++tcp != '\0' && !batch) {
896 do
897 switch (*tcp++) {
898
899 case 0: /* - Interruptible, no prompt */
900 prompt = 0;
901 setintr = 1;
902 nofile = 1;
903 break;
904
905 case 'b': /* -b Next arg is input file */
906 batch = 1;
907 break;
908
909 case 'c': /* -c Command input from arg */
910 if (argc == 1)
911 xexit(0);
912 argc--, tempv++;
913 #ifdef M_XENIX
914 /* Xenix Vi bug:
915 it relies on a 7 bit environment (/bin/sh), so it
916 pass ascii arguments with the 8th bit set */
917 if (!strcmp(argv[0], "sh"))
918 {
919 char *p;
920
921 for (p = tempv[0]; *p; ++p)
922 *p &= ASCII;
923 }
924 #endif
925 arginp = SAVE(tempv[0]);
926
927 /*
928 * we put the command into a variable
929 */
930 if (arginp != NULL)
931 setv(STRcommand, quote(Strsave(arginp)), VAR_READWRITE);
932
933 /*
934 * * Give an error on -c arguments that end in * backslash to
935 * ensure that you don't make * nonportable csh scripts.
936 */
937 {
938 int count;
939
940 cp = Strend(arginp);
941 count = 0;
942 while (cp > arginp && *--cp == '\\')
943 ++count;
944 if ((count & 1) != 0) {
945 exiterr = 1;
946 stderror(ERR_ARGC);
947 }
948 }
949 prompt = 0;
950 nofile = 1;
951 break;
952 case 'd': /* -d Load directory stack from file */
953 rdirs = 1;
954 break;
955
956 #ifdef apollo
957 case 'D': /* -D Define environment variable */
958 {
959 Char *dp;
960
961 cp = str2short(tcp);
962 if (dp = Strchr(cp, '=')) {
963 *dp++ = '\0';
964 tsetenv(cp, dp);
965 }
966 else
967 tsetenv(cp, STRNULL);
968 }
969 *tcp = '\0'; /* done with this argument */
970 break;
971 #endif /* apollo */
972
973 case 'e': /* -e Exit on any error */
974 exiterr = 1;
975 break;
976
977 case 'f': /* -f Fast start */
978 fast = 1;
979 break;
980
981 case 'i': /* -i Interactive, even if !intty */
982 intact = 1;
983 nofile = 1;
984 break;
985
986 case 'm': /* -m read .cshrc (from su) */
987 mflag = 1;
988 break;
989
990 case 'n': /* -n Don't execute */
991 noexec = 1;
992 break;
993
994 case 'q': /* -q (Undoc'd) ... die on quit */
995 quitit = 1;
996 break;
997
998 case 's': /* -s Read from std input */
999 nofile = 1;
1000 break;
1001
1002 case 't': /* -t Read one line from input */
1003 onelflg = 2;
1004 prompt = 0;
1005 nofile = 1;
1006 break;
1007
1008 case 'v': /* -v Echo hist expanded input */
1009 nverbose = 1; /* ... later */
1010 break;
1011
1012 case 'x': /* -x Echo just before execution */
1013 nexececho = 1; /* ... later */
1014 break;
1015
1016 case 'V': /* -V Echo hist expanded input */
1017 setNS(STRverbose); /* NOW! */
1018 break;
1019
1020 case 'X': /* -X Echo just before execution */
1021 setNS(STRecho); /* NOW! */
1022 break;
1023
1024 case 'F':
1025 /*
1026 * This will cause children to be created using fork instead of
1027 * vfork.
1028 */
1029 use_fork = 1;
1030 break;
1031
1032 case ' ':
1033 case '\t':
1034 case '\r':
1035 case '\n':
1036 /*
1037 * for O/S's that don't do the argument parsing right in
1038 * "#!/foo -f " scripts
1039 */
1040 break;
1041
1042 default: /* Unknown command option */
1043 exiterr = 1;
1044 stderror(ERR_TCSHUSAGE, tcp-1, progname);
1045 break;
1046
1047 } while (*tcp);
1048 tempv++, argc--;
1049 }
1050
1051 if (quitit) /* With all due haste, for debugging */
1052 (void) signal(SIGQUIT, SIG_DFL);
1053
1054 /*
1055 * Unless prevented by -, -c, -i, -s, or -t, if there are remaining
1056 * arguments the first of them is the name of a shell file from which to
1057 * read commands.
1058 */
1059 if (nofile == 0 && argc > 0) {
1060 nofile = xopen(tempv[0], O_RDONLY|O_LARGEFILE);
1061 if (nofile < 0) {
1062 child = 1; /* So this ... */
1063 /* ... doesn't return */
1064 stderror(ERR_SYSTEM, tempv[0], strerror(errno));
1065 }
1066 xfree(ffile);
1067 dolzero = 1;
1068 ffile = SAVE(tempv[0]);
1069 /*
1070 * Replace FSHIN. Handle /dev/std{in,out,err} specially
1071 * since once they are closed we cannot open them again.
1072 * In that case we use our own saved descriptors
1073 */
1074 if ((SHIN = dmove(nofile, FSHIN)) < 0)
1075 switch(nofile) {
1076 case 0:
1077 SHIN = FSHIN;
1078 break;
1079 case 1:
1080 SHIN = FSHOUT;
1081 break;
1082 case 2:
1083 SHIN = FSHDIAG;
1084 break;
1085 default:
1086 stderror(ERR_SYSTEM, tempv[0], strerror(errno));
1087 break;
1088 }
1089 (void) close_on_exec(SHIN, 1);
1090 prompt = 0;
1091 /* argc not used any more */ tempv++;
1092 }
1093
1094 /*
1095 * Call to closem() used to be part of initdesc(). Now called below where
1096 * the script name argument has become stdin. Kernel may have used a file
1097 * descriptor to hold the name of the script (setuid case) and this name
1098 * mustn't be lost by closing the fd too soon.
1099 */
1100 closem();
1101
1102 /*
1103 * Consider input a tty if it really is or we are interactive. but not for
1104 * editing (christos)
1105 */
1106 if (!(intty = isatty(SHIN))) {
1107 if (adrof(STRedit))
1108 unsetv(STRedit);
1109 editing = 0;
1110 }
1111 intty |= intact;
1112 #ifndef convex
1113 if (intty || (intact && isatty(SHOUT))) {
1114 if (!batch && (uid != euid || gid != egid)) {
1115 errno = EACCES;
1116 child = 1; /* So this ... */
1117 /* ... doesn't return */
1118 stderror(ERR_SYSTEM, progname, strerror(errno));
1119 }
1120 }
1121 #endif /* convex */
1122 isoutatty = isatty(SHOUT);
1123 isdiagatty = isatty(SHDIAG);
1124 /*
1125 * Decide whether we should play with signals or not. If we are explicitly
1126 * told (via -i, or -) or we are a login shell (arg0 starts with -) or the
1127 * input and output are both the ttys("csh", or "csh</dev/ttyx>/dev/ttyx")
1128 * Note that in only the login shell is it likely that parent may have set
1129 * signals to be ignored
1130 */
1131 if (loginsh || intact || (intty && isatty(SHOUT)))
1132 setintr = 1;
1133 settell();
1134 /*
1135 * Save the remaining arguments in argv.
1136 */
1137 setq(STRargv, blk2short(tempv), &shvhed, VAR_READWRITE);
1138
1139 /*
1140 * Set up the prompt.
1141 */
1142 if (prompt) {
1143 setcopy(STRprompt, STRdefprompt, VAR_READWRITE);
1144 /* that's a meta-questionmark */
1145 setcopy(STRprompt2, STRmquestion, VAR_READWRITE);
1146 setcopy(STRprompt3, STRKCORRECT, VAR_READWRITE);
1147 }
1148
1149 /*
1150 * If we are an interactive shell, then start fiddling with the signals;
1151 * this is a tricky game.
1152 */
1153 shpgrp = mygetpgrp();
1154 opgrp = tpgrp = -1;
1155 if (setintr) {
1156 struct sigaction osig;
1157
1158 **argv = '-';
1159 if (!quitit) /* Wary! */
1160 (void) signal(SIGQUIT, SIG_IGN);
1161 pintr_disabled = 1;
1162 sigset_interrupting(SIGINT, queue_pintr);
1163 (void) signal(SIGTERM, SIG_IGN);
1164
1165 /*
1166 * No reason I can see not to save history on all these events..
1167 * Most usual occurrence is in a window system, where we're not a login
1168 * shell, but might as well be... (sg)
1169 * But there might be races when lots of shells exit together...
1170 * [this is also incompatible].
1171 * We have to be mre careful here. If the parent wants to
1172 * ignore the signals then we leave them untouched...
1173 * We also only setup the handlers for shells that are trully
1174 * interactive.
1175 */
1176 sigaction(SIGHUP, NULL, &osig);
1177 if (loginsh || osig.sa_handler != SIG_IGN)
1178 /* exit processing on HUP */
1179 sigset_interrupting(SIGHUP, queue_phup);
1180 #ifdef SIGXCPU
1181 sigaction(SIGXCPU, NULL, &osig);
1182 if (loginsh || osig.sa_handler != SIG_IGN)
1183 /* exit processing on XCPU */
1184 sigset_interrupting(SIGXCPU, queue_phup);
1185 #endif
1186 #ifdef SIGXFSZ
1187 sigaction(SIGXFSZ, NULL, &osig);
1188 if (loginsh || osig.sa_handler != SIG_IGN)
1189 /* exit processing on XFSZ */
1190 sigset_interrupting(SIGXFSZ, queue_phup);
1191 #endif
1192
1193 if (quitit == 0 && arginp == 0) {
1194 #ifdef SIGTSTP
1195 (void) signal(SIGTSTP, SIG_IGN);
1196 #endif
1197 #ifdef SIGTTIN
1198 (void) signal(SIGTTIN, SIG_IGN);
1199 #endif
1200 #ifdef SIGTTOU
1201 (void) signal(SIGTTOU, SIG_IGN);
1202 #endif
1203 /*
1204 * Wait till in foreground, in case someone stupidly runs csh &
1205 * dont want to try to grab away the tty.
1206 */
1207 if (isatty(FSHDIAG))
1208 f = FSHDIAG;
1209 else if (isatty(FSHOUT))
1210 f = FSHOUT;
1211 else if (isatty(OLDSTD))
1212 f = OLDSTD;
1213 else
1214 f = -1;
1215
1216 #ifdef NeXT
1217 /* NeXT 2.0 /usr/etc/rlogind, does not set our process group! */
1218 if (shpgrp == 0) {
1219 shpgrp = getpid();
1220 (void) setpgid(0, shpgrp);
1221 (void) tcsetpgrp(f, shpgrp);
1222 }
1223 #endif /* NeXT */
1224 #ifdef BSDJOBS /* if we have tty job control */
1225 if (grabpgrp(f, shpgrp) != -1) {
1226 /*
1227 * Thanks to Matt Day for the POSIX references, and to
1228 * Paul Close for the SGI clarification.
1229 */
1230 if (setdisc(f) != -1) {
1231 opgrp = shpgrp;
1232 shpgrp = getpid();
1233 tpgrp = shpgrp;
1234 if (tcsetpgrp(f, shpgrp) == -1) {
1235 /*
1236 * On hpux 7.03 this fails with EPERM. This happens on
1237 * the 800 when opgrp != shpgrp at this point. (we were
1238 * forked from a non job control shell)
1239 * POSIX 7.2.4, says we failed because the process
1240 * group specified did not belong to a process
1241 * in the same session with the tty. So we set our
1242 * process group and try again.
1243 */
1244 if (setpgid(0, shpgrp) == -1) {
1245 xprintf("setpgid:");
1246 goto notty;
1247 }
1248 if (tcsetpgrp(f, shpgrp) == -1) {
1249 xprintf("tcsetpgrp:");
1250 goto notty;
1251 }
1252 }
1253 /*
1254 * We check the process group now. If it is the same, then
1255 * we don't need to set it again. On hpux 7.0 on the 300's
1256 * if we set it again it fails with EPERM. This is the
1257 * correct behavior according to POSIX 4.3.3 if the process
1258 * was a session leader .
1259 */
1260 else if (shpgrp != mygetpgrp()) {
1261 if(setpgid(0, shpgrp) == -1) {
1262 xprintf("setpgid:");
1263 goto notty;
1264 }
1265 }
1266 #ifdef IRIS4D
1267 /*
1268 * But on irix 3.3 we need to set it again, even if it is
1269 * the same. We do that to tell the system that we
1270 * need BSD process group compatibility.
1271 */
1272 else
1273 (void) setpgid(0, shpgrp);
1274 #endif
1275 (void) close_on_exec(dcopy(f, FSHTTY), 1);
1276 }
1277 else
1278 tpgrp = -1;
1279 }
1280 if (tpgrp == -1) {
1281 notty:
1282 xprintf(CGETS(11, 1, "Warning: no access to tty (%s).\n"),
1283 strerror(errno));
1284 xprintf("%s",
1285 CGETS(11, 2, "Thus no job control in this shell.\n"));
1286 /*
1287 * Fix from:Sakari Jalovaara <sja@sirius.hut.fi> if we don't
1288 * have access to tty, disable editing too
1289 */
1290 if (adrof(STRedit))
1291 unsetv(STRedit);
1292 editing = 0;
1293 }
1294 #else /* BSDJOBS */ /* don't have job control, so frotz it */
1295 tpgrp = -1;
1296 #endif /* BSDJOBS */
1297 }
1298 }
1299 if (setintr == 0 && parintr.sa_handler == SIG_DFL)
1300 setintr = 1;
1301
1302 /*
1303 * SVR4 doesn't send a SIGCHLD when a child is stopped or continued if the
1304 * handler is installed with signal(2) or sigset(2). sigaction(2) must
1305 * be used instead.
1306 *
1307 * David Dawes (dawes@physics.su.oz.au) Sept 1991
1308 */
1309 sigset_interrupting(SIGCHLD, queue_pchild);
1310
1311 if (intty && !arginp)
1312 (void) ed_Setup(editing);/* Get the tty state, and set defaults */
1313 /* Only alter the tty state if editing */
1314
1315 /*
1316 * Set an exit here in case of an interrupt or error reading the shell
1317 * start-up scripts.
1318 */
1319 osetintr = setintr;
1320 oparintr = parintr;
1321 (void)cleanup_push_mark(); /* There is no outer handler */
1322 if (setexit() != 0) /* PWP */
1323 reenter = 1;
1324 else
1325 reenter = 0;
1326 exitset++;
1327 haderr = 0; /* In case second time through */
1328 if (!fast && reenter == 0) {
1329 /* Will have varval(STRhome) here because set fast if don't */
1330 {
1331 pintr_disabled++;
1332 cleanup_push(&pintr_disabled, disabled_cleanup);
1333 setintr = 0;/*FIXRESET:cleanup*/
1334 /* onintr in /etc/ files has no effect */
1335 parintr.sa_handler = SIG_IGN;/*FIXRESET: cleanup*/
1336 #ifdef LOGINFIRST
1337 #ifdef _PATH_DOTLOGIN
1338 if (loginsh)
1339 (void) srcfile(_PATH_DOTLOGIN, 0, 0, NULL);
1340 #endif
1341 #endif
1342
1343 #ifdef _PATH_DOTCSHRC
1344 (void) srcfile(_PATH_DOTCSHRC, 0, 0, NULL);
1345 #endif
1346 if (!arginp && !onelflg && !havhash)
1347 dohash(NULL,NULL);
1348 #ifndef LOGINFIRST
1349 #ifdef _PATH_DOTLOGIN
1350 if (loginsh)
1351 (void) srcfile(_PATH_DOTLOGIN, 0, 0, NULL);
1352 #endif
1353 #endif
1354 cleanup_until(&pintr_disabled);
1355 setintr = osetintr;
1356 parintr = oparintr;
1357 }
1358 #ifdef LOGINFIRST
1359 if (loginsh)
1360 (void) srccat(varval(STRhome), STRsldotlogin);
1361 #endif
1362 /* upward compat. */
1363 if (!srccat(varval(STRhome), STRsldottcshrc))
1364 (void) srccat(varval(STRhome), STRsldotcshrc);
1365
1366 if (!arginp && !onelflg && !havhash)
1367 dohash(NULL,NULL);
1368
1369 /*
1370 * Source history before .login so that it is available in .login
1371 */
1372 loadhist(NULL, 0);
1373 #ifndef LOGINFIRST
1374 if (loginsh)
1375 (void) srccat(varval(STRhome), STRsldotlogin);
1376 #endif
1377 if (loginsh || rdirs)
1378 loaddirs(NULL);
1379 }
1380 /* Reset interrupt flag */
1381 setintr = osetintr;
1382 parintr = oparintr;
1383 exitset--;
1384
1385 /* Initing AFTER .cshrc is the Right Way */
1386 if (intty && !arginp) { /* PWP setup stuff */
1387 ed_Init(); /* init the new line editor */
1388 #ifdef SIG_WINDOW
1389 check_window_size(1); /* mung environment */
1390 #endif /* SIG_WINDOW */
1391 }
1392
1393 /*
1394 * Now are ready for the -v and -x flags
1395 */
1396 if (nverbose)
1397 setNS(STRverbose);
1398 if (nexececho)
1399 setNS(STRecho);
1400
1401 /*
1402 * All the rest of the world is inside this call. The argument to process
1403 * indicates whether it should catch "error unwinds". Thus if we are a
1404 * interactive shell our call here will never return by being blown past on
1405 * an error.
1406 */
1407 process(setintr);
1408
1409 /*
1410 * Mop-up.
1411 */
1412 /* Take care of these (especially HUP) here instead of inside flush. */
1413 handle_pending_signals();
1414 if (intty) {
1415 if (loginsh) {
1416 xprintf("logout\n");
1417 xclose(SHIN);
1418 child = 1;
1419 #ifdef TESLA
1420 do_logout = 1;
1421 #endif /* TESLA */
1422 goodbye(NULL, NULL);
1423 }
1424 else {
1425 xprintf("exit\n");
1426 }
1427 }
1428 record();
1429 exitstat();
1430 return (0);
1431 }
1432
1433 void
untty(void)1434 untty(void)
1435 {
1436 #ifdef BSDJOBS
1437 if (tpgrp > 0 && opgrp != shpgrp) {
1438 (void) setpgid(0, opgrp);
1439 (void) tcsetpgrp(FSHTTY, opgrp);
1440 (void) resetdisc(FSHTTY);
1441 }
1442 #endif /* BSDJOBS */
1443 }
1444
1445 void
importpath(Char * cp)1446 importpath(Char *cp)
1447 {
1448 size_t i = 0;
1449 Char *dp;
1450 Char **pv;
1451 int c;
1452
1453 for (dp = cp; *dp; dp++)
1454 if (*dp == PATHSEP)
1455 i++;
1456 /*
1457 * i+2 where i is the number of colons in the path. There are i+1
1458 * directories in the path plus we need room for a zero terminator.
1459 */
1460 pv = xcalloc(i + 2, sizeof(Char *));
1461 dp = cp;
1462 i = 0;
1463 if (*dp)
1464 for (;;) {
1465 if ((c = *dp) == PATHSEP || c == 0) {
1466 *dp = 0;
1467 pv[i++] = Strsave(*cp ? cp : STRdot);
1468 if (c) {
1469 cp = dp + 1;
1470 *dp = PATHSEP;
1471 }
1472 else
1473 break;
1474 }
1475 #ifdef WINNT_NATIVE
1476 else if (*dp == '\\')
1477 *dp = '/';
1478 #endif /* WINNT_NATIVE */
1479 dp++;
1480 }
1481 pv[i] = 0;
1482 cleanup_push(pv, blk_cleanup);
1483 setq(STRpath, pv, &shvhed, VAR_READWRITE);
1484 cleanup_ignore(pv);
1485 cleanup_until(pv);
1486 }
1487
1488 /*
1489 * Source to the file which is the catenation of the argument names.
1490 */
1491 static int
srccat(Char * cp,Char * dp)1492 srccat(Char *cp, Char *dp)
1493 {
1494 if (cp[0] == '/' && cp[1] == '\0')
1495 return srcfile(short2str(dp), (mflag ? 0 : 1), 0, NULL);
1496 else {
1497 Char *ep;
1498 char *ptr;
1499 int rv;
1500
1501 #ifdef WINNT_NATIVE
1502 ep = Strend(cp);
1503 if (ep != cp && ep[-1] == '/' && dp[0] == '/') /* silly win95 */
1504 dp++;
1505 #endif /* WINNT_NATIVE */
1506
1507 ep = Strspl(cp, dp);
1508 cleanup_push(ep, xfree);
1509 ptr = short2str(ep);
1510
1511 rv = srcfile(ptr, (mflag ? 0 : 1), 0, NULL);
1512 cleanup_until(ep);
1513 return rv;
1514 }
1515 }
1516
1517 /*
1518 * Source to a file putting the file descriptor in a safe place (> 2).
1519 */
1520 #ifndef WINNT_NATIVE
1521 static int
1522 #else
1523 int
1524 #endif /*WINNT_NATIVE*/
srcfile(const char * f,int onlyown,int flag,Char ** av)1525 srcfile(const char *f, int onlyown, int flag, Char **av)
1526 {
1527 int unit;
1528
1529 if ((unit = xopen(f, O_RDONLY|O_LARGEFILE)) == -1)
1530 return 0;
1531 cleanup_push(&unit, open_cleanup);
1532 unit = dmove(unit, -1);
1533 cleanup_ignore(&unit);
1534 cleanup_until(&unit);
1535
1536 (void) close_on_exec(unit, 1);
1537 srcunit(unit, onlyown, flag, av);
1538 return 1;
1539 }
1540
1541
1542 /*
1543 * Save the shell state, and establish new argument vector, and new input
1544 * fd.
1545 */
1546 static void
st_save(struct saved_state * st,int unit,int hflg,Char ** al,Char ** av)1547 st_save(struct saved_state *st, int unit, int hflg, Char **al, Char **av)
1548 {
1549 st->insource = insource;
1550 st->SHIN = SHIN;
1551 /* Want to preserve the meaning of "source file >output".
1552 * Save old descriptors, move new 0,1,2 to safe places and assign
1553 * them to SH* and let process() redo 0,1,2 from them.
1554 *
1555 * The macro returns true if d1 and d2 are good and they point to
1556 * different things. If you don't avoid saving duplicate
1557 * descriptors, you really limit the depth of "source" recursion
1558 * you can do because of all the open file descriptors. -IAN!
1559 */
1560 #define NEED_SAVE_FD(d1,d2) \
1561 (fstat(d1, &s1) != -1 && fstat(d2, &s2) != -1 \
1562 && (s1.st_ino != s2.st_ino || s1.st_dev != s2.st_dev) )
1563
1564 st->OLDSTD = st->SHOUT = st->SHDIAG = -1;/* test later to restore these */
1565 if (didfds) {
1566 struct stat s1, s2;
1567 if (NEED_SAVE_FD(0,OLDSTD)) {
1568 st->OLDSTD = OLDSTD;
1569 OLDSTD = dmove(0, -1);
1570 (void)close_on_exec(OLDSTD, 1);
1571 }
1572 if (NEED_SAVE_FD(1,SHOUT)) {
1573 st->SHOUT = SHOUT;
1574 SHOUT = dmove(1, -1);
1575 (void)close_on_exec(SHOUT, 1);
1576 }
1577 if (NEED_SAVE_FD(2,SHDIAG)) {
1578 st->SHDIAG = SHDIAG;
1579 SHDIAG = dmove(2, -1);
1580 (void)close_on_exec(SHDIAG, 1);
1581 }
1582 donefds();
1583 }
1584
1585 st->intty = intty;
1586 st->whyles = whyles;
1587 st->gointr = gointr;
1588 st->arginp = arginp;
1589 st->evalp = evalp;
1590 st->evalvec = evalvec;
1591 st->alvecp = alvecp;
1592 st->alvec = alvec;
1593 st->onelflg = onelflg;
1594 st->enterhist = enterhist;
1595 st->justpr = justpr;
1596 if (hflg)
1597 st->HIST = HIST;
1598 else
1599 st->HIST = '\0';
1600 st->cantell = cantell;
1601 cpybin(st->B, B);
1602
1603 /*
1604 * we can now pass arguments to source.
1605 * For compatibility we do that only if arguments were really
1606 * passed, otherwise we keep the old, global $argv like before.
1607 */
1608 if (av != NULL && *av != NULL) {
1609 struct varent *vp;
1610 if ((vp = adrof(STRargv)) != NULL && vp->vec != NULL)
1611 st->argv = saveblk(vp->vec);
1612 else
1613 st->argv = NULL;
1614 setq(STRargv, saveblk(av), &shvhed, VAR_READWRITE);
1615 }
1616 else
1617 st->argv = NULL;
1618 st->av = av;
1619
1620 SHIN = unit; /* Do this first */
1621
1622 /* Establish new input arena */
1623 {
1624 fbuf = NULL;
1625 fseekp = feobp = fblocks = 0;
1626 settell();
1627 }
1628
1629 arginp = 0;
1630 onelflg = 0;
1631 intty = isatty(SHIN);
1632 whyles = 0;
1633 gointr = 0;
1634 evalvec = 0;
1635 evalp = 0;
1636 alvec = al;
1637 alvecp = 0;
1638 enterhist = hflg;
1639 if (enterhist)
1640 HIST = '\0';
1641 insource = 1;
1642 }
1643
1644
1645 /*
1646 * Restore the shell to a saved state
1647 */
1648 static void
st_restore(void * xst)1649 st_restore(void *xst)
1650 {
1651 struct saved_state *st;
1652
1653 st = xst;
1654 if (st->SHIN == -1)
1655 return;
1656
1657 /* Reset input arena */
1658 {
1659 int i;
1660 Char** nfbuf = fbuf;
1661 int nfblocks = fblocks;
1662
1663 fblocks = 0;
1664 fbuf = NULL;
1665 for (i = 0; i < nfblocks; i++)
1666 xfree(nfbuf[i]);
1667 xfree(nfbuf);
1668 }
1669 cpybin(B, st->B);
1670
1671 xclose(SHIN);
1672
1673 insource = st->insource;
1674 SHIN = st->SHIN;
1675 if (st->OLDSTD != -1)
1676 xclose(OLDSTD), OLDSTD = st->OLDSTD;
1677 if (st->SHOUT != -1)
1678 xclose(SHOUT), SHOUT = st->SHOUT;
1679 if (st->SHDIAG != -1)
1680 xclose(SHDIAG), SHDIAG = st->SHDIAG;
1681 arginp = st->arginp;
1682 onelflg = st->onelflg;
1683 evalp = st->evalp;
1684 evalvec = st->evalvec;
1685 alvecp = st->alvecp;
1686 alvec = st->alvec;
1687 intty = st->intty;
1688 whyles = st->whyles;
1689 gointr = st->gointr;
1690 if (st->HIST != '\0')
1691 HIST = st->HIST;
1692 enterhist = st->enterhist;
1693 cantell = st->cantell;
1694 justpr = st->justpr;
1695
1696 if (st->argv != NULL)
1697 setq(STRargv, st->argv, &shvhed, VAR_READWRITE);
1698 else if (st->av != NULL && *st->av != NULL && adrof(STRargv) != NULL)
1699 unsetv(STRargv);
1700 }
1701
1702 /*
1703 * Source to a unit. If onlyown it must be our file or our group or
1704 * we don't chance it. This occurs on ".cshrc"s and the like.
1705 */
1706 static void
srcunit(int unit,int onlyown,int hflg,Char ** av)1707 srcunit(int unit, int onlyown, int hflg, Char **av)
1708 {
1709 struct saved_state st;
1710
1711 st.SHIN = -1; /* st_restore checks this */
1712
1713 if (unit < 0)
1714 return;
1715
1716 if (onlyown) {
1717 struct stat stb;
1718
1719 if (fstat(unit, &stb) < 0) {
1720 xclose(unit);
1721 return;
1722 }
1723 }
1724
1725 /* Does nothing before st_save() because st.SHIN == -1 */
1726 cleanup_push(&st, st_restore);
1727 if (setintr) {
1728 pintr_disabled++;
1729 cleanup_push(&pintr_disabled, disabled_cleanup);
1730 }
1731
1732 /* Save the current state and move us to a new state */
1733 st_save(&st, unit, hflg, NULL, av);
1734
1735 /*
1736 * Now if we are allowing commands to be interrupted, we let ourselves be
1737 * interrupted.
1738 */
1739 if (setintr) {
1740 cleanup_until(&pintr_disabled);
1741 pintr_disabled++;
1742 cleanup_push(&pintr_disabled, disabled_cleanup);
1743 }
1744
1745 process(0); /* 0 -> blow away on errors */
1746
1747 /* Restore the old state */
1748 cleanup_until(&st);
1749 }
1750
1751
1752 /*ARGSUSED*/
1753 void
goodbye(Char ** v,struct command * c)1754 goodbye(Char **v, struct command *c)
1755 {
1756 USE(v);
1757 USE(c);
1758 record();
1759
1760 if (loginsh) {
1761 size_t omark;
1762 sigset_t set;
1763
1764 sigemptyset(&set);
1765 signal(SIGQUIT, SIG_IGN);
1766 sigaddset(&set, SIGQUIT);
1767 sigprocmask(SIG_UNBLOCK, &set, NULL);
1768 signal(SIGINT, SIG_IGN);
1769 sigaddset(&set, SIGINT);
1770 signal(SIGTERM, SIG_IGN);
1771 sigaddset(&set, SIGTERM);
1772 signal(SIGHUP, SIG_IGN);
1773 sigaddset(&set, SIGHUP);
1774 sigprocmask(SIG_UNBLOCK, &set, NULL);
1775 phup_disabled = 1;
1776 setintr = 0; /* No interrupts after "logout" */
1777 /* Trap errors inside .logout */
1778 omark = cleanup_push_mark();
1779 if (setexit() == 0) {
1780 if (!(adrof(STRlogout)))
1781 setcopy(STRlogout, STRnormal, VAR_READWRITE);
1782 #ifdef _PATH_DOTLOGOUT
1783 (void) srcfile(_PATH_DOTLOGOUT, 0, 0, NULL);
1784 #endif
1785 if (adrof(STRhome))
1786 (void) srccat(varval(STRhome), STRsldtlogout);
1787 #ifdef TESLA
1788 do_logout = 1;
1789 #endif /* TESLA */
1790 }
1791 cleanup_pop_mark(omark);
1792 }
1793 exitstat();
1794 }
1795
1796 void
exitstat(void)1797 exitstat(void)
1798 {
1799 #ifdef PROF
1800 _mcleanup();
1801 #endif
1802 /*
1803 * Note that if STATUS is corrupted (i.e. getn bombs) then error will exit
1804 * directly because we poke child here. Otherwise we might continue
1805 * unwarrantedly (sic).
1806 */
1807 child = 1;
1808
1809 xexit(getn(varval(STRstatus)));
1810 }
1811
1812 /*
1813 * in the event of a HUP we want to save the history
1814 */
1815 void
phup(void)1816 phup(void)
1817 {
1818 if (loginsh) {
1819 setcopy(STRlogout, STRhangup, VAR_READWRITE);
1820 #ifdef _PATH_DOTLOGOUT
1821 (void) srcfile(_PATH_DOTLOGOUT, 0, 0, NULL);
1822 #endif
1823 if (adrof(STRhome))
1824 (void) srccat(varval(STRhome), STRsldtlogout);
1825 }
1826
1827 record();
1828
1829 #ifdef POSIXJOBS
1830 /*
1831 * We kill the last foreground process group. It then becomes
1832 * responsible to propagate the SIGHUP to its progeny.
1833 */
1834 {
1835 struct process *pp, *np;
1836
1837 for (pp = proclist.p_next; pp; pp = pp->p_next) {
1838 np = pp;
1839 /*
1840 * Find if this job is in the foreground. It could be that
1841 * the process leader has exited and the foreground flag
1842 * is cleared for it.
1843 */
1844 do
1845 /*
1846 * If a process is in the foreground we try to kill
1847 * it's process group. If we succeed, then the
1848 * whole job is gone. Otherwise we keep going...
1849 * But avoid sending HUP to the shell again.
1850 */
1851 if (((np->p_flags & PFOREGND) != 0) && np->p_jobid != shpgrp) {
1852 np->p_flags &= ~PHUP;
1853 if (killpg(np->p_jobid, SIGHUP) != -1) {
1854 /* In case the job was suspended... */
1855 #ifdef SIGCONT
1856 (void) killpg(np->p_jobid, SIGCONT);
1857 #endif
1858 break;
1859 }
1860 }
1861 while ((np = np->p_friends) != pp);
1862 }
1863 }
1864 #endif /* POSIXJOBS */
1865
1866 xexit(SIGHUP);
1867 }
1868
1869 static Char *jobargv[2] = {STRjobs, 0};
1870
1871 /*
1872 * Catch an interrupt, e.g. during lexical input.
1873 * If we are an interactive shell, we reset the interrupt catch
1874 * immediately. In any case we drain the shell output,
1875 * and finally go through the normal error mechanism, which
1876 * gets a chance to make the shell go away.
1877 */
1878 int just_signaled; /* bugfix by Michael Bloom (mg@ttidca.TTI.COM) */
1879
1880 void
pintr(void)1881 pintr(void)
1882 {
1883 just_signaled = 1;
1884 pintr1(1);
1885 }
1886
1887 void
pintr1(int wantnl)1888 pintr1(int wantnl)
1889 {
1890 if (setintr) {
1891 if (pjobs) {
1892 pjobs = 0;
1893 xputchar('\n');
1894 dojobs(jobargv, NULL);
1895 stderror(ERR_NAME | ERR_INTR);
1896 }
1897 }
1898 /* MH - handle interrupted completions specially */
1899 {
1900 if (InsideCompletion)
1901 stderror(ERR_SILENT);
1902 }
1903 /* JV - Make sure we shut off inputl */
1904 {
1905 (void) Cookedmode();
1906 GettingInput = 0;
1907 }
1908 drainoline();
1909 #ifdef HAVE_GETPWENT
1910 (void) endpwent();
1911 #endif
1912
1913 /*
1914 * If we have an active "onintr" then we search for the label. Note that if
1915 * one does "onintr -" then we shan't be interruptible so we needn't worry
1916 * about that here.
1917 */
1918 if (gointr) {
1919 gotolab(gointr);
1920 reset();
1921 }
1922 else if (intty && wantnl) {
1923 if (editing) {
1924 /*
1925 * If we are editing a multi-line input command, and move to
1926 * the beginning of the line, we don't want to trash it when
1927 * we hit ^C
1928 */
1929 PastBottom();
1930 ClearLines();
1931 ClearDisp();
1932 }
1933 else {
1934 /* xputchar('\n'); *//* Some like this, others don't */
1935 (void) putraw('\r');
1936 (void) putraw('\n');
1937 }
1938 }
1939 stderror(ERR_SILENT);
1940 }
1941
1942 /*
1943 * Process is the main driving routine for the shell.
1944 * It runs all command processing, except for those within { ... }
1945 * in expressions (which is run by a routine evalav in sh.exp.c which
1946 * is a stripped down process), and `...` evaluation which is run
1947 * also by a subset of this code in sh.glob.c in the routine backeval.
1948 *
1949 * The code here is a little strange because part of it is interruptible
1950 * and hence freeing of structures appears to occur when none is necessary
1951 * if this is ignored.
1952 *
1953 * Note that if catch is not set then we will unwind on any error.
1954 * If an end-of-file occurs, we return.
1955 */
1956 void
process(int catch)1957 process(int catch)
1958 {
1959 jmp_buf_t osetexit;
1960 /* PWP: This might get nuked by longjmp so don't make it a register var */
1961 size_t omark;
1962 volatile int didexitset = 0;
1963
1964 getexit(osetexit);
1965 omark = cleanup_push_mark();
1966 for (;;) {
1967 struct command *t;
1968 int hadhist, old_pintr_disabled;
1969
1970 (void)setexit();
1971 if (didexitset == 0) {
1972 exitset++;
1973 didexitset++;
1974 }
1975 pendjob();
1976
1977 justpr = enterhist; /* execute if not entering history */
1978
1979 if (haderr) {
1980 if (!catch) {
1981 /* unwind */
1982 doneinp = 0;
1983 cleanup_pop_mark(omark);
1984 resexit(osetexit);
1985 reset();
1986 }
1987 haderr = 0;
1988 /*
1989 * Every error is eventually caught here or the shell dies. It is
1990 * at this point that we clean up any left-over open files, by
1991 * closing all but a fixed number of pre-defined files. Thus
1992 * routines don't have to worry about leaving files open due to
1993 * deeper errors... they will get closed here.
1994 */
1995 closem();
1996 continue;
1997 }
1998 if (doneinp) {
1999 doneinp = 0;
2000 break;
2001 }
2002 if (chkstop)
2003 chkstop--;
2004 if (neednote)
2005 pnote();
2006 if (intty && prompt && evalvec == 0) {
2007 just_signaled = 0;
2008 mailchk();
2009 /*
2010 * Watch for logins/logouts. Next is scheduled commands stored
2011 * previously using "sched." Then execute periodic commands.
2012 * Following that, the prompt precmd is run.
2013 */
2014 #ifndef HAVENOUTMP
2015 watch_login(0);
2016 #endif /* !HAVENOUTMP */
2017 sched_run();
2018 period_cmd();
2019 precmd();
2020 /*
2021 * If we are at the end of the input buffer then we are going to
2022 * read fresh stuff. Otherwise, we are rereading input and don't
2023 * need or want to prompt.
2024 */
2025 if (fseekp == feobp && aret == TCSH_F_SEEK)
2026 printprompt(0, NULL);
2027 flush();
2028 setalarm(1);
2029 }
2030 if (seterr) {
2031 xfree(seterr);
2032 seterr = NULL;
2033 }
2034
2035 /*
2036 * Interruptible during interactive reads
2037 */
2038 if (setintr)
2039 pintr_push_enable(&old_pintr_disabled);
2040 hadhist = lex(¶ml);
2041 if (setintr)
2042 cleanup_until(&old_pintr_disabled);
2043 cleanup_push(¶ml, lex_cleanup);
2044
2045 /*
2046 * Echo not only on VERBOSE, but also with history expansion. If there
2047 * is a lexical error then we forego history echo.
2048 * Do not echo if we're only entering history (source -h).
2049 */
2050 if ((hadhist && !seterr && intty && !tellwhat && !Expand && !whyles) ||
2051 (!enterhist && adrof(STRverbose)))
2052 {
2053 int odidfds = didfds;
2054 haderr = 1;
2055 didfds = 0;
2056 prlex(¶ml);
2057 flush();
2058 haderr = 0;
2059 didfds = odidfds;
2060 }
2061 (void) alarm(0); /* Autologout OFF */
2062 alrmcatch_disabled = 1;
2063
2064 /*
2065 * Save input text on the history list if reading in old history, or it
2066 * is from the terminal at the top level and not in a loop.
2067 *
2068 * PWP: entry of items in the history list while in a while loop is done
2069 * elsewhere...
2070 */
2071 if (enterhist || (catch && intty && !whyles && !tellwhat && !arun))
2072 savehist(¶ml, enterhist > 1);
2073
2074 if (Expand && seterr)
2075 Expand = 0;
2076
2077 /*
2078 * Print lexical error messages, except when sourcing history lists.
2079 */
2080 if (!enterhist && seterr)
2081 stderror(ERR_OLD);
2082
2083 /*
2084 * If had a history command :p modifier then this is as far as we
2085 * should go
2086 */
2087 if (justpr)
2088 goto cmd_done;
2089
2090 /*
2091 * If had a tellwhat from twenex() then do
2092 */
2093 if (tellwhat) {
2094 (void) tellmewhat(¶ml, NULL);
2095 goto cmd_done;
2096 }
2097
2098 alias(¶ml);
2099
2100 #ifdef BSDJOBS
2101 /*
2102 * If we are interactive, try to continue jobs that we have stopped
2103 */
2104 if (prompt)
2105 continue_jobs(¶ml);
2106 #endif /* BSDJOBS */
2107
2108 /*
2109 * Check to see if the user typed "rm * .o" or something
2110 */
2111 if (prompt)
2112 rmstar(¶ml);
2113 /*
2114 * Parse the words of the input into a parse tree.
2115 */
2116 t = syntax(paraml.next, ¶ml, 0);
2117 /*
2118 * We cannot cleanup push here, because cd /blah; echo foo
2119 * would rewind t on the chdir error, and free the rest of the command
2120 */
2121 if (seterr) {
2122 freesyn(t);
2123 stderror(ERR_OLD);
2124 }
2125
2126 postcmd();
2127 /*
2128 * Execute the parse tree From: Michael Schroeder
2129 * <mlschroe@immd4.informatik.uni-erlangen.de> was execute(t, tpgrp);
2130 */
2131 execute(t, (tpgrp > 0 ? tpgrp : -1), NULL, NULL, TRUE);
2132 freesyn(t);
2133
2134 /*
2135 * Made it!
2136 */
2137 #ifdef SIG_WINDOW
2138 if (windowchg || (catch && intty && !whyles && !tellwhat)) {
2139 (void) check_window_size(0); /* for window systems */
2140 }
2141 #endif /* SIG_WINDOW */
2142 setcopy(STR_, InputBuf, VAR_READWRITE | VAR_NOGLOB);
2143 cmd_done:
2144 if (cleanup_reset())
2145 cleanup_until(¶ml);
2146 else
2147 haderr = 1;
2148 }
2149 cleanup_pop_mark(omark);
2150 resexit(osetexit);
2151 exitset--;
2152 handle_pending_signals();
2153 }
2154
2155 /*ARGSUSED*/
2156 void
dosource(Char ** t,struct command * c)2157 dosource(Char **t, struct command *c)
2158 {
2159 Char *f;
2160 int hflg = 0;
2161 char *file;
2162
2163 USE(c);
2164 t++;
2165 if (*t && eq(*t, STRmh)) {
2166 if (*++t == NULL)
2167 stderror(ERR_NAME | ERR_HFLAG);
2168 hflg++;
2169 }
2170 else if (*t && eq(*t, STRmm)) {
2171 if (*++t == NULL)
2172 stderror(ERR_NAME | ERR_MFLAG);
2173 hflg = 2;
2174 }
2175
2176 f = globone(*t++, G_ERROR);
2177 file = strsave(short2str(f));
2178 cleanup_push(file, xfree);
2179 xfree(f);
2180 t = glob_all_or_error(t);
2181 if ((!srcfile(file, 0, hflg, t)) && (!hflg) && (!bequiet))
2182 stderror(ERR_SYSTEM, file, strerror(errno));
2183 cleanup_until(file);
2184 }
2185
2186 /*
2187 * Check for mail.
2188 * If we are a login shell, then we don't want to tell
2189 * about any mail file unless its been modified
2190 * after the time we started.
2191 * This prevents us from telling the user things he already
2192 * knows, since the login program insists on saying
2193 * "You have mail."
2194 */
2195
2196 /*
2197 * The AMS version.
2198 * This version checks if the file is a directory, and if so,
2199 * tells you the number of files in it, otherwise do the old thang.
2200 * The magic "+1" in the time calculation is to compensate for
2201 * an AFS bug where directory mtimes are set to 1 second in
2202 * the future.
2203 */
2204
2205 static void
mailchk(void)2206 mailchk(void)
2207 {
2208 struct varent *v;
2209 Char **vp;
2210 time_t t;
2211 int intvl, cnt;
2212 struct stat stb;
2213 int new;
2214
2215 v = adrof(STRmail);
2216 if (v == NULL || v->vec == NULL)
2217 return;
2218 (void) time(&t);
2219 vp = v->vec;
2220 cnt = blklen(vp);
2221 intvl = (cnt && number(*vp)) ? (--cnt, getn(*vp++)) : MAILINTVL;
2222 if (intvl < 1)
2223 intvl = 1;
2224 if (chktim + intvl > t)
2225 return;
2226 for (; *vp; vp++) {
2227 char *filename = short2str(*vp);
2228 char *mboxdir = filename;
2229
2230 if (stat(filename, &stb) < 0)
2231 continue;
2232 #if defined(BSDTIMES) || defined(_SEQUENT_)
2233 new = stb.st_mtime > time0.tv_sec;
2234 #else
2235 new = stb.st_mtime > seconds0;
2236 #endif
2237 if (S_ISDIR(stb.st_mode)) {
2238 DIR *mailbox;
2239 int mailcount = 0;
2240 char *tempfilename;
2241 struct stat stc;
2242
2243 tempfilename = xasprintf("%s/new", filename);
2244
2245 if (stat(tempfilename, &stc) != -1 && S_ISDIR(stc.st_mode)) {
2246 /*
2247 * "filename/new" exists and is a directory; you are
2248 * using Qmail.
2249 */
2250 stb = stc;
2251 #if defined(BSDTIMES) || defined(_SEQUENT_)
2252 new = stb.st_mtime > time0.tv_sec;
2253 #else
2254 new = stb.st_mtime > seconds0;
2255 #endif
2256 mboxdir = tempfilename;
2257 }
2258
2259 if (stb.st_mtime <= chktim + 1 || (loginsh && !new)) {
2260 xfree(tempfilename);
2261 continue;
2262 }
2263
2264 mailbox = opendir(mboxdir);
2265 xfree(tempfilename);
2266 if (mailbox == NULL)
2267 continue;
2268
2269 /* skip . and .. */
2270 if (!readdir(mailbox) || !readdir(mailbox)) {
2271 (void)closedir(mailbox);
2272 continue;
2273 }
2274
2275 while (readdir(mailbox))
2276 mailcount++;
2277
2278 (void)closedir(mailbox);
2279 if (mailcount == 0)
2280 continue;
2281
2282 if (cnt == 1)
2283 xprintf(CGETS(11, 3, "You have %d mail messages.\n"),
2284 mailcount);
2285 else
2286 xprintf(CGETS(11, 4, "You have %d mail messages in %s.\n"),
2287 mailcount, filename);
2288 }
2289 else {
2290 char *type;
2291
2292 if (stb.st_size == 0 || stb.st_atime >= stb.st_mtime ||
2293 (stb.st_atime <= chktim && stb.st_mtime <= chktim) ||
2294 (loginsh && !new))
2295 continue;
2296 type = strsave(new ? CGETS(11, 6, "new ") : "");
2297 cleanup_push(type, xfree);
2298 if (cnt == 1)
2299 xprintf(CGETS(11, 5, "You have %smail.\n"), type);
2300 else
2301 xprintf(CGETS(11, 7, "You have %smail in %s.\n"), type, filename);
2302 cleanup_until(type);
2303 }
2304 }
2305 chktim = t;
2306 }
2307
2308 /*
2309 * Extract a home directory from the password file
2310 * The argument points to a buffer where the name of the
2311 * user whose home directory is sought is currently.
2312 * We return home directory of the user, or NULL.
2313 */
2314 Char *
gethdir(const Char * home)2315 gethdir(const Char *home)
2316 {
2317 Char *h;
2318
2319 /*
2320 * Is it us?
2321 */
2322 if (*home == '\0') {
2323 if ((h = varval(STRhome)) != STRNULL)
2324 return Strsave(h);
2325 else
2326 return NULL;
2327 }
2328
2329 /*
2330 * Look in the cache
2331 */
2332 if ((h = gettilde(home)) == NULL)
2333 return NULL;
2334 else
2335 return Strsave(h);
2336 }
2337
2338 /*
2339 * Move the initial descriptors to their eventual
2340 * resting places, closing all other units.
2341 */
2342 void
initdesc(void)2343 initdesc(void)
2344 {
2345 #ifdef NLS_BUGS
2346 #ifdef NLS_CATALOGS
2347 nlsclose();
2348 #endif /* NLS_CATALOGS */
2349 #endif /* NLS_BUGS */
2350
2351
2352 didfds = 0; /* 0, 1, 2 aren't set up */
2353 (void) close_on_exec(SHIN = dcopy(0, FSHIN), 1);
2354 (void) close_on_exec(SHOUT = dcopy(1, FSHOUT), 1);
2355 (void) close_on_exec(SHDIAG = dcopy(2, FSHDIAG), 1);
2356 (void) close_on_exec(OLDSTD = dcopy(SHIN, FOLDSTD), 1);
2357 #ifndef CLOSE_ON_EXEC
2358 didcch = 0; /* Havent closed for child */
2359 #endif /* CLOSE_ON_EXEC */
2360 if (SHDIAG >= 0)
2361 isdiagatty = isatty(SHDIAG);
2362 else
2363 isdiagatty = 0;
2364 if (SHDIAG >= 0)
2365 isoutatty = isatty(SHOUT);
2366 else
2367 isoutatty = 0;
2368 #ifdef NLS_BUGS
2369 #ifdef NLS_CATALOGS
2370 nlsinit();
2371 #endif /* NLS_CATALOGS */
2372 #endif /* NLS_BUGS */
2373 }
2374
2375
2376 void
2377 #ifdef PROF
done(int i)2378 done(int i)
2379 #else
2380 xexit(int i)
2381 #endif
2382 {
2383 #ifdef TESLA
2384 if (loginsh && do_logout) {
2385 /* this is to send hangup signal to the develcon */
2386 /* we toggle DTR. clear dtr - sleep 1 - set dtr */
2387 /* ioctl will return ENOTTY for pty's but we ignore it */
2388 /* exitstat will run after disconnect */
2389 /* we sleep for 2 seconds to let things happen in */
2390 /* .logout and rechist() */
2391 #ifdef TIOCCDTR
2392 (void) sleep(2);
2393 (void) ioctl(FSHTTY, TIOCCDTR, NULL);
2394 (void) sleep(1);
2395 (void) ioctl(FSHTTY, TIOCSDTR, NULL);
2396 #endif /* TIOCCDTR */
2397 }
2398 #endif /* TESLA */
2399
2400 {
2401 struct process *pp, *np;
2402 pid_t mypid = getpid();
2403 /* Kill all processes marked for hup'ing */
2404 for (pp = proclist.p_next; pp; pp = pp->p_next) {
2405 np = pp;
2406 do
2407 if ((np->p_flags & PHUP) && np->p_jobid != shpgrp &&
2408 np->p_parentid == mypid) {
2409 if (killpg(np->p_jobid, SIGHUP) != -1) {
2410 /* In case the job was suspended... */
2411 #ifdef SIGCONT
2412 (void) killpg(np->p_jobid, SIGCONT);
2413 #endif
2414 break;
2415 }
2416 }
2417 while ((np = np->p_friends) != pp);
2418 }
2419 }
2420 untty();
2421 #ifdef NLS_CATALOGS
2422 /*
2423 * We need to call catclose, because SVR4 leaves symlinks behind otherwise
2424 * in the catalog directories. We cannot close on a vforked() child,
2425 * because messages will stop working on the parent too.
2426 */
2427 if (child == 0)
2428 nlsclose();
2429 #endif /* NLS_CATALOGS */
2430 #ifdef WINNT_NATIVE
2431 nt_cleanup();
2432 #endif /* WINNT_NATIVE */
2433 _exit(i);
2434 }
2435
2436 #ifndef _PATH_DEFPATH
2437 static Char **
defaultpath(void)2438 defaultpath(void)
2439 {
2440 char *ptr;
2441 Char **blk, **blkp;
2442 struct stat stb;
2443
2444 blkp = blk = xmalloc(sizeof(Char *) * 10);
2445
2446 #ifndef NODOT
2447 # ifndef DOTLAST
2448 *blkp++ = Strsave(STRdot);
2449 # endif
2450 #endif
2451
2452 #define DIRAPPEND(a) \
2453 if (stat(ptr = a, &stb) == 0 && S_ISDIR(stb.st_mode)) \
2454 *blkp++ = SAVE(ptr)
2455
2456 #ifdef _PATH_LOCAL
2457 DIRAPPEND(_PATH_LOCAL);
2458 #endif
2459
2460 #ifdef _PATH_USRUCB
2461 DIRAPPEND(_PATH_USRUCB);
2462 #endif
2463
2464 #ifdef _PATH_USRBSD
2465 DIRAPPEND(_PATH_USRBSD);
2466 #endif
2467
2468 #ifdef _PATH_BIN
2469 DIRAPPEND(_PATH_BIN);
2470 #endif
2471
2472 #ifdef _PATH_USRBIN
2473 DIRAPPEND(_PATH_USRBIN);
2474 #endif
2475
2476 #undef DIRAPPEND
2477
2478 #ifndef NODOT
2479 # ifdef DOTLAST
2480 *blkp++ = Strsave(STRdot);
2481 # endif
2482 #endif
2483 *blkp = NULL;
2484 return (blk);
2485 }
2486 #endif
2487
2488 static void
record(void)2489 record(void)
2490 {
2491 if (!fast) {
2492 recdirs(NULL, adrof(STRsavedirs) != NULL);
2493 rechist(NULL, adrof(STRsavehist) != NULL);
2494 }
2495 displayHistStats("Exiting"); /* no-op unless DEBUG_HIST */
2496 }
2497
2498 /*
2499 * Grab the tty repeatedly, and give up if we are not in the correct
2500 * tty process group.
2501 */
2502 int
grabpgrp(int fd,pid_t desired)2503 grabpgrp(int fd, pid_t desired)
2504 {
2505 struct sigaction old;
2506 pid_t pgrp;
2507 size_t i;
2508
2509 for (i = 0; i < 100; i++) {
2510 if ((pgrp = tcgetpgrp(fd)) == -1)
2511 return -1;
2512 if (pgrp == desired)
2513 return 0;
2514 (void)sigaction(SIGTTIN, NULL, &old);
2515 (void)signal(SIGTTIN, SIG_DFL);
2516 (void)kill(0, SIGTTIN);
2517 (void)sigaction(SIGTTIN, &old, NULL);
2518 }
2519 errno = EPERM;
2520 return -1;
2521 }
2522