1/dts-v1/;
2
3#include "rt3050.dtsi"
4
5/ {
6	compatible = "WR512-3GN", "ralink,rt3052-soc";
7	model = "WR512-3GN-like router";
8
9	cfi@1f000000 {
10		compatible = "cfi-flash";
11		reg = <0x1f000000 0x800000>;
12		bank-width = <2>;
13		device-width = <2>;
14		#address-cells = <1>;
15		#size-cells = <1>;
16
17		partition@0 {
18			label = "u-boot";
19			reg = <0x0 0x30000>;
20			read-only;
21		};
22
23		partition@30000 {
24			label = "u-boot-env";
25			reg = <0x30000 0x10000>;
26			read-only;
27		};
28
29		factory: partition@40000 {
30			label = "factory";
31			reg = <0x40000 0x10000>;
32			read-only;
33		};
34
35		partition@50000 {
36			label = "firmware";
37			reg = <0x50000 0x3c8000>;
38		};
39	};
40
41	gpio-leds {
42		compatible = "gpio-leds";
43
44		3g {
45			label = "wr512-3gn:green:3g";
46			gpios = <&gpio0 9 1>;
47		};
48
49		gateway {
50			label = "wr512-3gn:green:gateway";
51			gpios = <&gpio0 11 1>;
52		};
53
54		ap {
55			label = "wr512-3gn:green:ap";
56			gpios = <&gpio0 12 1>;
57		};
58
59		wps {
60			label = "wr512-3gn:green:wps";
61			gpios = <&gpio0 14 1>;
62		};
63
64		station {
65			label = "wr512-3gn:green:station";
66			gpios = <&gpio0 13 1>;
67		};
68	};
69
70	gpio-keys-polled {
71		compatible = "gpio-keys-polled";
72		#address-cells = <1>;
73		#size-cells = <0>;
74		poll-interval = <20>;
75
76		reset_wps {
77			label = "reset_wps";
78			gpios = <&gpio0 10 1>;
79			linux,code = <0x198>;
80		};
81
82		mode {
83			label = "mode";
84			gpios = <&gpio0 7 1>;
85			linux,code = <0x32>;
86		};
87	};
88};
89
90&pinctrl {
91	state_default: pinctrl0 {
92		gpio {
93			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
94			ralink,function = "gpio";
95		};
96	};
97};
98
99&esw {
100	mediatek,portmap = <0x2f>;
101};
102
103&wmac {
104	ralink,mtd-eeprom = <&factory 0>;
105};
106
107&otg {
108	status = "okay";
109};
110