1// SPDX-License-Identifier: GPL-2.0-only 2/dts-v1/; 3 4#include <dt-bindings/input/input.h> 5#include "omap443x.dtsi" 6#include "motorola-cpcap-mapphone.dtsi" 7 8/ { 9 chosen { 10 stdout-path = &uart3; 11 }; 12 13 aliases { 14 display0 = &lcd0; 15 display1 = &hdmi0; 16 }; 17 18 /* 19 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, 20 * then 1023 - 1024 seems to contain mbm. 21 */ 22 memory { 23 device_type = "memory"; 24 reg = <0x80000000 0x3fd00000>; /* 1021 MB */ 25 }; 26 27 /* Poweroff GPIO probably connected to CPCAP */ 28 gpio-poweroff { 29 compatible = "gpio-poweroff"; 30 pinctrl-0 = <&poweroff_gpio>; 31 pinctrl-names = "default"; 32 gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ 33 }; 34 35 hdmi0: connector { 36 compatible = "hdmi-connector"; 37 pinctrl-0 = <&hdmi_hpd_gpio>; 38 pinctrl-names = "default"; 39 label = "hdmi"; 40 type = "d"; 41 42 hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ 43 44 port { 45 hdmi_connector_in: endpoint { 46 remote-endpoint = <&hdmi_out>; 47 }; 48 }; 49 }; 50 51 /* 52 * HDMI 5V regulator probably sourced from battery. Let's keep 53 * keep this as always enabled for HDMI to work until we've 54 * figured what the encoder chip is. 55 */ 56 hdmi_regulator: regulator-hdmi { 57 compatible = "regulator-fixed"; 58 regulator-name = "hdmi"; 59 regulator-min-microvolt = <5000000>; 60 regulator-max-microvolt = <5000000>; 61 gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ 62 enable-active-high; 63 regulator-always-on; 64 }; 65 66 /* FS USB Host PHY on port 1 for mdm6600 */ 67 fsusb1_phy: usb-phy@1 { 68 compatible = "motorola,mapphone-mdm6600"; 69 pinctrl-0 = <&usb_mdm6600_pins>; 70 pinctrl-names = "default"; 71 enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ 72 power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ 73 reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ 74 /* mode: gpio_148 gpio_149 */ 75 motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, 76 <&gpio5 21 GPIO_ACTIVE_HIGH>; 77 /* cmd: gpio_103 gpio_104 gpio_142 */ 78 motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, 79 <&gpio4 8 GPIO_ACTIVE_HIGH>, 80 <&gpio5 14 GPIO_ACTIVE_HIGH>; 81 /* status: gpio_52 gpio_53 gpio_55 */ 82 motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, 83 <&gpio2 21 GPIO_ACTIVE_HIGH>, 84 <&gpio2 23 GPIO_ACTIVE_HIGH>; 85 #phy-cells = <0>; 86 }; 87 88 /* HS USB host TLL nop-phy on port 2 for w3glte */ 89 hsusb2_phy: usb-phy@2 { 90 compatible = "usb-nop-xceiv"; 91 #phy-cells = <0>; 92 }; 93 94 /* LCD regulator from sw5 source */ 95 lcd_regulator: regulator-lcd { 96 compatible = "regulator-fixed"; 97 regulator-name = "lcd"; 98 regulator-min-microvolt = <5050000>; 99 regulator-max-microvolt = <5050000>; 100 gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ 101 enable-active-high; 102 vin-supply = <&sw5>; 103 }; 104 105 /* This is probably coming straight from the battery.. */ 106 wl12xx_vmmc: regulator-wl12xx { 107 compatible = "regulator-fixed"; 108 regulator-name = "vwl1271"; 109 regulator-min-microvolt = <1650000>; 110 regulator-max-microvolt = <1650000>; 111 gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ 112 startup-delay-us = <70000>; 113 enable-active-high; 114 }; 115 116 gpio_keys { 117 compatible = "gpio-keys"; 118 119 volume_down { 120 label = "Volume Down"; 121 gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ 122 linux,code = <KEY_VOLUMEDOWN>; 123 linux,can-disable; 124 /* Value above 7.95ms for no GPIO hardware debounce */ 125 debounce-interval = <10>; 126 }; 127 128 slider { 129 label = "Keypad Slide"; 130 gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ 131 linux,input-type = <EV_SW>; 132 linux,code = <SW_KEYPAD_SLIDE>; 133 linux,can-disable; 134 /* Value above 7.95ms for no GPIO hardware debounce */ 135 debounce-interval = <10>; 136 }; 137 }; 138 139 soundcard { 140 compatible = "audio-graph-card"; 141 label = "Droid 4 Audio"; 142 143 simple-graph-card,widgets = 144 "Speaker", "Earpiece", 145 "Speaker", "Loudspeaker", 146 "Headphone", "Headphone Jack", 147 "Microphone", "Internal Mic"; 148 149 simple-graph-card,routing = 150 "Earpiece", "EP", 151 "Loudspeaker", "SPKR", 152 "Headphone Jack", "HSL", 153 "Headphone Jack", "HSR", 154 "MICR", "Internal Mic"; 155 156 dais = <&mcbsp2_port>, <&mcbsp3_port>; 157 }; 158 159 pwm8: dmtimer-pwm-8 { 160 pinctrl-names = "default"; 161 pinctrl-0 = <&vibrator_direction_pin>; 162 163 compatible = "ti,omap-dmtimer-pwm"; 164 #pwm-cells = <3>; 165 ti,timers = <&timer8>; 166 ti,clock-source = <0x01>; 167 }; 168 169 pwm9: dmtimer-pwm-9 { 170 pinctrl-names = "default"; 171 pinctrl-0 = <&vibrator_enable_pin>; 172 173 compatible = "ti,omap-dmtimer-pwm"; 174 #pwm-cells = <3>; 175 ti,timers = <&timer9>; 176 ti,clock-source = <0x01>; 177 }; 178 179 vibrator { 180 compatible = "pwm-vibrator"; 181 pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; 182 pwm-names = "enable", "direction"; 183 direction-duty-cycle-ns = <10000000>; 184 }; 185 186 backlight: backlight { 187 compatible = "led-backlight"; 188 189 leds = <&backlight_led>; 190 brightness-levels = <31 63 95 127 159 191 223 255>; 191 default-brightness-level = <6>; 192 }; 193}; 194 195&dss { 196 status = "okay"; 197}; 198 199&dsi1 { 200 status = "okay"; 201 vdd-supply = <&vcsi>; 202 203 port { 204 dsi1_out_ep: endpoint { 205 remote-endpoint = <&lcd0_in>; 206 lanes = <0 1 2 3 4 5>; 207 }; 208 }; 209 210 lcd0: display { 211 compatible = "panel-dsi-cm"; 212 label = "lcd0"; 213 vddi-supply = <&lcd_regulator>; 214 reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ 215 216 backlight = <&backlight>; 217 218 width-mm = <50>; 219 height-mm = <89>; 220 221 panel-timing { 222 clock-frequency = <0>; /* Calculated by dsi */ 223 224 hback-porch = <2>; 225 hactive = <540>; 226 hfront-porch = <0>; 227 hsync-len = <2>; 228 229 vback-porch = <1>; 230 vactive = <960>; 231 vfront-porch = <0>; 232 vsync-len = <1>; 233 234 hsync-active = <0>; 235 vsync-active = <0>; 236 de-active = <1>; 237 pixelclk-active = <1>; 238 }; 239 240 port { 241 lcd0_in: endpoint { 242 remote-endpoint = <&dsi1_out_ep>; 243 }; 244 }; 245 }; 246}; 247 248&hdmi { 249 status = "okay"; 250 pinctrl-0 = <&dss_hdmi_pins>; 251 pinctrl-names = "default"; 252 vdda-supply = <&vdac>; 253 254 port { 255 hdmi_out: endpoint { 256 remote-endpoint = <&hdmi_connector_in>; 257 lanes = <1 0 3 2 5 4 7 6>; 258 }; 259 }; 260}; 261 262/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ 263&hdqw1w { 264 pinctrl-0 = <&hdq_pins>; 265 pinctrl-names = "default"; 266 ti,mode = "1w"; 267}; 268 269&i2c1 { 270 tmp105@48 { 271 compatible = "ti,tmp105"; 272 reg = <0x48>; 273 pinctrl-0 = <&tmp105_irq>; 274 pinctrl-names = "default"; 275 /* kpd_row0.gpio_178 */ 276 interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING 277 &omap4_pmx_core 0x14e>; 278 interrupt-names = "irq", "wakeup"; 279 wakeup-source; 280 }; 281}; 282 283&keypad { 284 keypad,num-rows = <8>; 285 keypad,num-columns = <8>; 286 linux,keymap = < 287 288 /* Row 1 */ 289 MATRIX_KEY(0, 2, KEY_1) 290 MATRIX_KEY(0, 6, KEY_2) 291 MATRIX_KEY(2, 3, KEY_3) 292 MATRIX_KEY(0, 7, KEY_4) 293 MATRIX_KEY(0, 4, KEY_5) 294 MATRIX_KEY(5, 5, KEY_6) 295 MATRIX_KEY(0, 1, KEY_7) 296 MATRIX_KEY(0, 5, KEY_8) 297 MATRIX_KEY(0, 0, KEY_9) 298 MATRIX_KEY(1, 6, KEY_0) 299 300 /* Row 2 */ 301 MATRIX_KEY(3, 4, KEY_APOSTROPHE) 302 MATRIX_KEY(7, 6, KEY_Q) 303 MATRIX_KEY(7, 7, KEY_W) 304 MATRIX_KEY(7, 2, KEY_E) 305 MATRIX_KEY(1, 0, KEY_R) 306 MATRIX_KEY(4, 4, KEY_T) 307 MATRIX_KEY(1, 2, KEY_Y) 308 MATRIX_KEY(6, 7, KEY_U) 309 MATRIX_KEY(2, 2, KEY_I) 310 MATRIX_KEY(5, 6, KEY_O) 311 MATRIX_KEY(3, 7, KEY_P) 312 MATRIX_KEY(6, 5, KEY_BACKSPACE) 313 314 /* Row 3 */ 315 MATRIX_KEY(5, 4, KEY_TAB) 316 MATRIX_KEY(5, 7, KEY_A) 317 MATRIX_KEY(2, 7, KEY_S) 318 MATRIX_KEY(7, 0, KEY_D) 319 MATRIX_KEY(2, 6, KEY_F) 320 MATRIX_KEY(6, 2, KEY_G) 321 MATRIX_KEY(6, 6, KEY_H) 322 MATRIX_KEY(1, 4, KEY_J) 323 MATRIX_KEY(3, 1, KEY_K) 324 MATRIX_KEY(2, 1, KEY_L) 325 MATRIX_KEY(4, 6, KEY_ENTER) 326 327 /* Row 4 */ 328 MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ 329 MATRIX_KEY(6, 1, KEY_Z) 330 MATRIX_KEY(7, 4, KEY_X) 331 MATRIX_KEY(5, 1, KEY_C) 332 MATRIX_KEY(1, 7, KEY_V) 333 MATRIX_KEY(2, 4, KEY_B) 334 MATRIX_KEY(4, 1, KEY_N) 335 MATRIX_KEY(1, 1, KEY_M) 336 MATRIX_KEY(3, 5, KEY_COMMA) 337 MATRIX_KEY(5, 2, KEY_DOT) 338 MATRIX_KEY(6, 3, KEY_UP) 339 MATRIX_KEY(7, 3, KEY_OK) 340 341 /* Row 5 */ 342 MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ 343 MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ 344 MATRIX_KEY(6, 0, KEY_MINUS) 345 MATRIX_KEY(4, 7, KEY_EQUAL) 346 MATRIX_KEY(1, 5, KEY_SPACE) 347 MATRIX_KEY(3, 2, KEY_SLASH) 348 MATRIX_KEY(4, 3, KEY_LEFT) 349 MATRIX_KEY(5, 3, KEY_DOWN) 350 MATRIX_KEY(3, 3, KEY_RIGHT) 351 352 /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ 353 MATRIX_KEY(5, 0, KEY_VOLUMEUP) 354 >; 355}; 356 357&mmc1 { 358 vmmc-supply = <&vwlan2>; 359 bus-width = <4>; 360 cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ 361}; 362 363&mmc2 { 364 vmmc-supply = <&vsdio>; 365 bus-width = <8>; 366 ti,non-removable; 367}; 368 369&mmc3 { 370 vmmc-supply = <&wl12xx_vmmc>; 371 /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ 372 interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 373 &omap4_pmx_core 0xde>; 374 interrupt-names = "irq", "wakeup"; 375 non-removable; 376 bus-width = <4>; 377 cap-power-off-card; 378 keep-power-in-suspend; 379 380 #address-cells = <1>; 381 #size-cells = <0>; 382 wlcore: wlcore@2 { 383 compatible = "ti,wl1285", "ti,wl1283"; 384 reg = <2>; 385 /* gpio_100 with gpmc_wait2 pad as wakeirq */ 386 interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, 387 <&omap4_pmx_core 0x4e>; 388 interrupt-names = "irq", "wakeup"; 389 ref-clock-frequency = <26000000>; 390 tcxo-clock-frequency = <26000000>; 391 }; 392}; 393 394&i2c1 { 395 led-controller@38 { 396 compatible = "ti,lm3532"; 397 #address-cells = <1>; 398 #size-cells = <0>; 399 reg = <0x38>; 400 401 enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; 402 403 ramp-up-us = <1024>; 404 ramp-down-us = <8193>; 405 406 backlight_led: led@0 { 407 reg = <0>; 408 led-sources = <2>; 409 ti,led-mode = <0>; 410 label = ":backlight"; 411 }; 412 413 led@1 { 414 reg = <1>; 415 led-sources = <1>; 416 ti,led-mode = <0>; 417 label = ":kbd_backlight"; 418 }; 419 }; 420}; 421 422&i2c2 { 423 touchscreen@4a { 424 compatible = "atmel,maxtouch"; 425 reg = <0x4a>; 426 pinctrl-names = "default"; 427 pinctrl-0 = <&touchscreen_pins>; 428 429 reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ 430 431 /* gpio_183 with sys_nirq2 pad as wakeup */ 432 interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, 433 <&omap4_pmx_core 0x160>; 434 interrupt-names = "irq", "wakeup"; 435 wakeup-source; 436 }; 437 438 isl29030@44 { 439 compatible = "isil,isl29030"; 440 reg = <0x44>; 441 442 pinctrl-names = "default"; 443 pinctrl-0 = <&als_proximity_pins>; 444 445 interrupt-parent = <&gpio6>; 446 interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ 447 }; 448}; 449 450&omap4_pmx_core { 451 452 /* hdmi_hpd.gpio_63 */ 453 hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { 454 pinctrl-single,pins = < 455 OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) 456 >; 457 }; 458 459 hdq_pins: pinmux_hdq_pins { 460 pinctrl-single,pins = < 461 /* 0x4a100120 hdq_sio.hdq_sio aa27 */ 462 OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) 463 >; 464 }; 465 466 /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ 467 dss_hdmi_pins: pinmux_dss_hdmi_pins { 468 pinctrl-single,pins = < 469 OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) 470 OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) 471 OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) 472 >; 473 }; 474 475 /* gpmc_ncs0.gpio_50 */ 476 poweroff_gpio: pinmux_poweroff_pins { 477 pinctrl-single,pins = < 478 OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) 479 >; 480 }; 481 482 /* kpd_row0.gpio_178 */ 483 tmp105_irq: pinmux_tmp105_irq { 484 pinctrl-single,pins = < 485 OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) 486 >; 487 }; 488 489 usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { 490 /* gpio_60 */ 491 pinctrl-single,pins = < 492 OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) 493 >; 494 }; 495 496 touchscreen_pins: pinmux_touchscreen_pins { 497 pinctrl-single,pins = < 498 OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) 499 OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) 500 >; 501 }; 502 503 als_proximity_pins: pinmux_als_proximity_pins { 504 pinctrl-single,pins = < 505 OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) 506 >; 507 }; 508 509 usb_mdm6600_pins: pinmux_usb_mdm6600_pins { 510 pinctrl-single,pins = < 511 /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ 512 OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) 513 514 /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ 515 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) 516 517 /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ 518 OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) 519 520 /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ 521 OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) 522 523 /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ 524 OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) 525 526 /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ 527 OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) 528 529 /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ 530 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) 531 532 /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ 533 OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) 534 535 /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ 536 OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) 537 538 /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ 539 OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) 540 541 /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ 542 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) 543 >; 544 }; 545 546 usb_ulpi_pins: pinmux_usb_ulpi_pins { 547 pinctrl-single,pins = < 548 OMAP4_IOPAD(0x196, MUX_MODE7) 549 OMAP4_IOPAD(0x198, MUX_MODE7) 550 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) 551 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) 552 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) 553 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) 554 OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) 555 OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) 556 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) 557 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) 558 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) 559 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) 560 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) 561 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) 562 >; 563 }; 564 565 /* usb0_otg_dp and usb0_otg_dm */ 566 usb_utmi_pins: pinmux_usb_utmi_pins { 567 pinctrl-single,pins = < 568 OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) 569 OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) 570 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) 571 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) 572 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) 573 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) 574 OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) 575 OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) 576 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) 577 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) 578 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) 579 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) 580 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) 581 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) 582 >; 583 }; 584 585 /* 586 * Note that the v3.0.8 stock userspace dynamically remuxes uart1 587 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 588 * when not used. If needed, we can add rts pin remux later based 589 * on power measurements. 590 */ 591 uart1_pins: pinmux_uart1_pins { 592 pinctrl-single,pins = < 593 /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ 594 OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) 595 596 /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ 597 OMAP4_IOPAD(0x13e, MUX_MODE1) 598 599 /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ 600 OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) 601 602 /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ 603 OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) 604 >; 605 }; 606 607 /* uart3_tx_irtx and uart3_rx_irrx */ 608 uart3_pins: pinmux_uart3_pins { 609 pinctrl-single,pins = < 610 OMAP4_IOPAD(0x196, MUX_MODE7) 611 OMAP4_IOPAD(0x198, MUX_MODE7) 612 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) 613 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) 614 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) 615 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) 616 OMAP4_IOPAD(0x1ba, MUX_MODE2) 617 OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) 618 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) 619 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) 620 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) 621 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) 622 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) 623 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) 624 >; 625 }; 626 627 uart4_pins: pinmux_uart4_pins { 628 pinctrl-single,pins = < 629 OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ 630 OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ 631 OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ 632 OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ 633 >; 634 }; 635 636 mcbsp2_pins: pinmux_mcbsp2_pins { 637 pinctrl-single,pins = < 638 OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ 639 OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ 640 OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ 641 OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ 642 >; 643 }; 644 645 mcbsp3_pins: pinmux_mcbsp3_pins { 646 pinctrl-single,pins = < 647 OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ 648 OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ 649 OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ 650 OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ 651 >; 652 }; 653 654 vibrator_direction_pin: pinmux_vibrator_direction_pin { 655 pinctrl-single,pins = < 656 OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ 657 >; 658 }; 659 660 vibrator_enable_pin: pinmux_vibrator_enable_pin { 661 pinctrl-single,pins = < 662 OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ 663 >; 664 }; 665}; 666 667&omap4_pmx_wkup { 668 usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { 669 /* gpio_wk0 */ 670 pinctrl-single,pins = < 671 OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) 672 >; 673 }; 674}; 675 676/* RNG is used by secure mode and not accessible */ 677&rng_target { 678 status = "disabled"; 679}; 680 681/* Configure pwm clock source for timers 8 & 9 */ 682&timer8 { 683 assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; 684 assigned-clock-parents = <&sys_clkin_ck>; 685}; 686 687&timer9 { 688 assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; 689 assigned-clock-parents = <&sys_clkin_ck>; 690}; 691 692/* 693 * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for 694 * uart1 wakeirq. 695 */ 696&uart1 { 697 pinctrl-names = "default"; 698 pinctrl-0 = <&uart1_pins>; 699 interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH 700 &omap4_pmx_core 0xfc>; 701}; 702 703&uart3 { 704 interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH 705 &omap4_pmx_core 0x17c>; 706}; 707 708&uart4 { 709 pinctrl-names = "default"; 710 pinctrl-0 = <&uart4_pins>; 711 712 bluetooth { 713 compatible = "ti,wl1285-st"; 714 enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ 715 max-speed = <3686400>; 716 }; 717}; 718 719&usbhsohci { 720 phys = <&fsusb1_phy>; 721 phy-names = "usb"; 722}; 723 724&usbhsehci { 725 phys = <&hsusb2_phy>; 726}; 727 728&usbhshost { 729 port1-mode = "ohci-phy-4pin-dpdm"; 730 port2-mode = "ehci-tll"; 731}; 732 733/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ 734&usb_otg_hs { 735 interface-type = <1>; 736 mode = <3>; 737 738 /* 739 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. 740 * VBUS Regulator Main Characteristics". Binding uses 2 mA units. 741 */ 742 power = <150>; 743}; 744 745&i2c4 { 746 ak8975: magnetometer@c { 747 compatible = "asahi-kasei,ak8975"; 748 reg = <0x0c>; 749 750 vdd-supply = <&vhvio>; 751 752 interrupt-parent = <&gpio6>; 753 interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ 754 755 rotation-matrix = "-1", "0", "0", 756 "0", "1", "0", 757 "0", "0", "-1"; 758 759 }; 760 761 lis3dh: accelerometer@18 { 762 compatible = "st,lis3dh-accel"; 763 reg = <0x18>; 764 765 vdd-supply = <&vhvio>; 766 767 interrupt-parent = <&gpio2>; 768 interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ 769 770 rotation-matrix = "0", "-1", "0", 771 "1", "0", "0", 772 "0", "0", "1"; 773 }; 774}; 775 776&mcbsp2 { 777 #sound-dai-cells = <0>; 778 pinctrl-names = "default"; 779 pinctrl-0 = <&mcbsp2_pins>; 780 status = "okay"; 781 782 mcbsp2_port: port { 783 cpu_dai2: endpoint { 784 dai-format = "i2s"; 785 remote-endpoint = <&cpcap_audio_codec0>; 786 frame-master = <&cpcap_audio_codec0>; 787 bitclock-master = <&cpcap_audio_codec0>; 788 }; 789 }; 790}; 791 792&mcbsp3 { 793 #sound-dai-cells = <0>; 794 pinctrl-names = "default"; 795 pinctrl-0 = <&mcbsp3_pins>; 796 status = "okay"; 797 798 mcbsp3_port: port { 799 cpu_dai3: endpoint { 800 dai-format = "dsp_a"; 801 frame-master = <&cpcap_audio_codec1>; 802 bitclock-master = <&cpcap_audio_codec1>; 803 remote-endpoint = <&cpcap_audio_codec1>; 804 }; 805 }; 806}; 807 808&cpcap_audio_codec0 { 809 remote-endpoint = <&cpu_dai2>; 810}; 811 812&cpcap_audio_codec1 { 813 remote-endpoint = <&cpu_dai3>; 814}; 815