xref: /NextBSD/sys/conf/options (revision 4557fabb34e865d7f40be64b39c9e34fa41dbb60)
1# $FreeBSD$
2#
3#        On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions.  Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible.  Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test.  If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>".  Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name	filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG		opt_aac.h
34AACRAID_DEBUG		opt_aacraid.h
35AHC_ALLOW_MEMIO		opt_aic7xxx.h
36AHC_TMODE_ENABLE	opt_aic7xxx.h
37AHC_DUMP_EEPROM		opt_aic7xxx.h
38AHC_DEBUG		opt_aic7xxx.h
39AHC_DEBUG_OPTS		opt_aic7xxx.h
40AHC_REG_PRETTY_PRINT	opt_aic7xxx.h
41AHD_DEBUG		opt_aic79xx.h
42AHD_DEBUG_OPTS		opt_aic79xx.h
43AHD_TMODE_ENABLE	opt_aic79xx.h
44AHD_REG_PRETTY_PRINT	opt_aic79xx.h
45ADW_ALLOW_MEMIO		opt_adw.h
46
47TWA_DEBUG		opt_twa.h
48TWA_FLASH_FIRMWARE	opt_twa.h
49
50# Debugging options.
51ALT_BREAK_TO_DEBUGGER	opt_kdb.h
52BREAK_TO_DEBUGGER	opt_kdb.h
53DDB
54DDB_BUFR_SIZE	opt_ddb.h
55DDB_CAPTURE_DEFAULTBUFSIZE	opt_ddb.h
56DDB_CAPTURE_MAXBUFSIZE	opt_ddb.h
57DDB_CTF		opt_ddb.h
58DDB_NUMSYM	opt_ddb.h
59GDB
60KDB		opt_global.h
61KDB_TRACE	opt_kdb.h
62KDB_UNATTENDED	opt_kdb.h
63KLD_DEBUG	opt_kld.h
64SYSCTL_DEBUG	opt_sysctl.h
65EARLY_PRINTF	opt_global.h
66TEXTDUMP_PREFERRED	opt_ddb.h
67TEXTDUMP_VERBOSE	opt_ddb.h
68
69# Miscellaneous options.
70ADAPTIVE_LOCKMGRS
71ALQ
72ALTERA_SDCARD_FAST_SIM	opt_altera_sdcard.h
73ATSE_CFI_HACK	opt_cfi.h
74AUDIT		opt_global.h
75BOOTHOWTO	opt_global.h
76BOOTVERBOSE	opt_global.h
77CALLOUT_PROFILING
78CAPABILITIES	opt_capsicum.h
79CAPABILITY_MODE	opt_capsicum.h
80COMPAT_43	opt_compat.h
81COMPAT_43TTY	opt_compat.h
82COMPAT_FREEBSD4	opt_compat.h
83COMPAT_FREEBSD5	opt_compat.h
84COMPAT_FREEBSD6	opt_compat.h
85COMPAT_FREEBSD7	opt_compat.h
86COMPAT_FREEBSD9	opt_compat.h
87COMPAT_FREEBSD10	opt_compat.h
88COMPAT_CLOUDABI64	opt_dontuse.h
89COMPAT_LINUXKPI	opt_compat.h
90COMPILING_LINT	opt_global.h
91CY_PCI_FASTINTR
92DEADLKRES	opt_watchdog.h
93DIRECTIO
94FILEMON		opt_dontuse.h
95FFCLOCK
96FULL_PREEMPTION	opt_sched.h
97GZIO		opt_gzio.h
98IMAGACT_BINMISC		opt_dontuse.h
99IPI_PREEMPTION	opt_sched.h
100GEOM_AES	opt_geom.h
101GEOM_BDE	opt_geom.h
102GEOM_BSD	opt_geom.h
103GEOM_CACHE	opt_geom.h
104GEOM_CONCAT	opt_geom.h
105GEOM_ELI	opt_geom.h
106GEOM_FOX	opt_geom.h
107GEOM_GATE	opt_geom.h
108GEOM_JOURNAL	opt_geom.h
109GEOM_LABEL	opt_geom.h
110GEOM_LABEL_GPT	opt_geom.h
111GEOM_LINUX_LVM	opt_geom.h
112GEOM_MAP	opt_geom.h
113GEOM_MBR	opt_geom.h
114GEOM_MIRROR	opt_geom.h
115GEOM_MOUNTVER	opt_geom.h
116GEOM_MULTIPATH	opt_geom.h
117GEOM_NOP	opt_geom.h
118GEOM_PART_APM	opt_geom.h
119GEOM_PART_BSD	opt_geom.h
120GEOM_PART_BSD64	opt_geom.h
121GEOM_PART_EBR	opt_geom.h
122GEOM_PART_EBR_COMPAT	opt_geom.h
123GEOM_PART_GPT	opt_geom.h
124GEOM_PART_LDM	opt_geom.h
125GEOM_PART_MBR	opt_geom.h
126GEOM_PART_PC98	opt_geom.h
127GEOM_PART_VTOC8	opt_geom.h
128GEOM_PC98	opt_geom.h
129GEOM_RAID	opt_geom.h
130GEOM_RAID3	opt_geom.h
131GEOM_SHSEC	opt_geom.h
132GEOM_STRIPE	opt_geom.h
133GEOM_SUNLABEL	opt_geom.h
134GEOM_UNCOMPRESS	opt_geom.h
135GEOM_UNCOMPRESS_DEBUG	opt_geom.h
136GEOM_UZIP	opt_geom.h
137GEOM_VINUM	opt_geom.h
138GEOM_VIRSTOR	opt_geom.h
139GEOM_VOL	opt_geom.h
140GEOM_ZERO	opt_geom.h
141KDTRACE_HOOKS	opt_global.h
142KDTRACE_FRAME	opt_kdtrace.h
143KN_HASHSIZE	opt_kqueue.h
144KSTACK_MAX_PAGES
145KSTACK_PAGES
146KSTACK_USAGE_PROF
147KTRACE
148KTRACE_REQUEST_POOL	opt_ktrace.h
149LIBICONV
150MAC		opt_global.h
151MAC_BIBA	opt_dontuse.h
152MAC_BSDEXTENDED	opt_dontuse.h
153MAC_IFOFF	opt_dontuse.h
154MAC_LOMAC	opt_dontuse.h
155MAC_MLS		opt_dontuse.h
156MAC_NONE	opt_dontuse.h
157MAC_PARTITION	opt_dontuse.h
158MAC_PORTACL	opt_dontuse.h
159MAC_SEEOTHERUIDS	opt_dontuse.h
160MAC_STATIC	opt_mac.h
161MAC_STUB	opt_dontuse.h
162MAC_TEST	opt_dontuse.h
163MD_ROOT		opt_md.h
164MD_ROOT_FSTYPE	opt_md.h
165MD_ROOT_SIZE	opt_md.h
166MFI_DEBUG	opt_mfi.h
167MFI_DECODE_LOG	opt_mfi.h
168MPROF_BUFFERS	opt_mprof.h
169MPROF_HASH_SIZE	opt_mprof.h
170NEW_PCIB	opt_global.h
171NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
172NO_ADAPTIVE_RWLOCKS
173NO_ADAPTIVE_SX
174NO_EVENTTIMERS		opt_timer.h
175NO_SYSCTL_DESCR	opt_global.h
176NSWBUF_MIN	opt_swap.h
177MBUF_PACKET_ZONE_DISABLE	opt_global.h
178PANIC_REBOOT_WAIT_TIME	opt_panic.h
179PCI_IOV		opt_global.h
180PPC_DEBUG	opt_ppc.h
181PPC_PROBE_CHIPSET	opt_ppc.h
182PPS_SYNC	opt_ntp.h
183PREEMPTION	opt_sched.h
184QUOTA
185SCHED_4BSD	opt_sched.h
186SCHED_STATS	opt_sched.h
187SCHED_ULE	opt_sched.h
188SLEEPQUEUE_PROFILING
189SLHCI_DEBUG	opt_slhci.h
190SPX_HACK
191STACK		opt_stack.h
192SUIDDIR
193MSGMNB		opt_sysvipc.h
194MSGMNI		opt_sysvipc.h
195MSGSEG		opt_sysvipc.h
196MSGSSZ		opt_sysvipc.h
197MSGTQL		opt_sysvipc.h
198SEMMNI		opt_sysvipc.h
199SEMMNS		opt_sysvipc.h
200SEMMNU		opt_sysvipc.h
201SEMMSL		opt_sysvipc.h
202SEMOPM		opt_sysvipc.h
203SEMUME		opt_sysvipc.h
204SHMALL		opt_sysvipc.h
205SHMMAX		opt_sysvipc.h
206SHMMAXPGS	opt_sysvipc.h
207SHMMIN		opt_sysvipc.h
208SHMMNI		opt_sysvipc.h
209SHMSEG		opt_sysvipc.h
210SYSVMSG		opt_sysvipc.h
211SYSVSEM		opt_sysvipc.h
212SYSVSHM		opt_sysvipc.h
213SW_WATCHDOG	opt_watchdog.h
214TURNSTILE_PROFILING
215UMTX_PROFILING
216VFS_AIO
217VERBOSE_SYSINIT
218WLCACHE		opt_wavelan.h
219WLDEBUG		opt_wavelan.h
220
221# POSIX kernel options
222P1003_1B_MQUEUE			opt_posix.h
223P1003_1B_SEMAPHORES		opt_posix.h
224_KPOSIX_PRIORITY_SCHEDULING	opt_posix.h
225
226# PThread WorkQueue Option
227THRWORKQ	opt_thrworkq.h
228
229# Do we want the config file compiled into the kernel?
230INCLUDE_CONFIG_FILE	opt_config.h
231
232# Options for static filesystems.  These should only be used at config
233# time, since the corresponding lkms cannot work if there are any static
234# dependencies.  Unusability is enforced by hiding the defines for the
235# options in a never-included header.
236AUTOFS		opt_dontuse.h
237CD9660		opt_dontuse.h
238EXT2FS		opt_dontuse.h
239FDESCFS		opt_dontuse.h
240FFS		opt_dontuse.h
241FUSE		opt_dontuse.h
242MSDOSFS		opt_dontuse.h
243NANDFS		opt_dontuse.h
244NULLFS		opt_dontuse.h
245PROCFS		opt_dontuse.h
246PSEUDOFS	opt_dontuse.h
247REISERFS	opt_dontuse.h
248SMBFS		opt_dontuse.h
249TMPFS		opt_dontuse.h
250UDF		opt_dontuse.h
251UNIONFS		opt_dontuse.h
252ZFS		opt_dontuse.h
253
254# Pseudofs debugging
255PSEUDOFS_TRACE	opt_pseudofs.h
256
257# In-kernel GSS-API
258KGSSAPI		opt_kgssapi.h
259KGSSAPI_DEBUG	opt_kgssapi.h
260
261# These static filesystems have one slightly bogus static dependency in
262# sys/i386/i386/autoconf.c.  If any of these filesystems are
263# statically compiled into the kernel, code for mounting them as root
264# filesystems will be enabled - but look below.
265# NFSCL - client
266# NFSD - server
267NFSCL		opt_nfs.h
268NFSD		opt_nfs.h
269
270# filesystems and libiconv bridge
271CD9660_ICONV	opt_dontuse.h
272MSDOSFS_ICONV	opt_dontuse.h
273UDF_ICONV	opt_dontuse.h
274
275# If you are following the conditions in the copyright,
276# you can enable soft-updates which will speed up a lot of thigs
277# and make the system safer from crashes at the same time.
278# otherwise a STUB module will be compiled in.
279SOFTUPDATES	opt_ffs.h
280
281# On small, embedded systems, it can be useful to turn off support for
282# snapshots.  It saves about 30-40k for a feature that would be lightly
283# used, if it is used at all.
284NO_FFS_SNAPSHOT	opt_ffs.h
285
286# Enabling this option turns on support for Access Control Lists in UFS,
287# which can be used to support high security configurations.  Depends on
288# UFS_EXTATTR.
289UFS_ACL		opt_ufs.h
290
291# Enabling this option turns on support for extended attributes in UFS-based
292# filesystems, which can be used to support high security configurations
293# as well as new filesystem features.
294UFS_EXTATTR	opt_ufs.h
295UFS_EXTATTR_AUTOSTART	opt_ufs.h
296
297# Enable fast hash lookups for large directories on UFS-based filesystems.
298UFS_DIRHASH	opt_ufs.h
299
300# Enable gjournal-based UFS journal.
301UFS_GJOURNAL	opt_ufs.h
302
303# The below sentence is not in English, and neither is this one.
304# We plan to remove the static dependences above, with a
305# <filesystem>_ROOT option to control if it usable as root.  This list
306# allows these options to be present in config files already (though
307# they won't make any difference yet).
308NFS_ROOT	opt_nfsroot.h
309
310# SMB/CIFS requester
311NETSMB		opt_netsmb.h
312
313# Options used only in subr_param.c.
314HZ		opt_param.h
315MAXFILES	opt_param.h
316NBUF		opt_param.h
317NSFBUFS		opt_param.h
318VM_BCACHE_SIZE_MAX	opt_param.h
319VM_SWZONE_SIZE_MAX	opt_param.h
320MAXUSERS
321DFLDSIZ		opt_param.h
322MAXDSIZ		opt_param.h
323MAXSSIZ		opt_param.h
324
325# Generic SCSI options.
326CAM_MAX_HIGHPOWER	opt_cam.h
327CAMDEBUG		opt_cam.h
328CAM_DEBUG_COMPILE	opt_cam.h
329CAM_DEBUG_DELAY		opt_cam.h
330CAM_DEBUG_BUS		opt_cam.h
331CAM_DEBUG_TARGET	opt_cam.h
332CAM_DEBUG_LUN		opt_cam.h
333CAM_DEBUG_FLAGS		opt_cam.h
334CAM_BOOT_DELAY		opt_cam.h
335SCSI_DELAY		opt_scsi.h
336SCSI_NO_SENSE_STRINGS	opt_scsi.h
337SCSI_NO_OP_STRINGS	opt_scsi.h
338
339# Options used only in cam/ata/ata_da.c
340ADA_TEST_FAILURE	opt_ada.h
341ATA_STATIC_ID		opt_ada.h
342
343# Options used only in cam/scsi/scsi_cd.c
344CHANGER_MIN_BUSY_SECONDS	opt_cd.h
345CHANGER_MAX_BUSY_SECONDS	opt_cd.h
346
347# Options used only in cam/scsi/scsi_sa.c.
348SA_IO_TIMEOUT		opt_sa.h
349SA_SPACE_TIMEOUT	opt_sa.h
350SA_REWIND_TIMEOUT	opt_sa.h
351SA_ERASE_TIMEOUT	opt_sa.h
352SA_1FM_AT_EOD		opt_sa.h
353
354# Options used only in cam/scsi/scsi_pt.c
355SCSI_PT_DEFAULT_TIMEOUT	opt_pt.h
356
357# Options used only in cam/scsi/scsi_ses.c
358SES_ENABLE_PASSTHROUGH	opt_ses.h
359
360# Options used in dev/sym/ (Symbios SCSI driver).
361SYM_SETUP_LP_PROBE_MAP	opt_sym.h	#-Low Priority Probe Map (bits)
362					# Allows the ncr to take precedence
363					# 1 (1<<0) -> 810a, 860
364					# 2 (1<<1) -> 825a, 875, 885, 895
365					# 4 (1<<2) -> 895a, 896, 1510d
366SYM_SETUP_SCSI_DIFF	opt_sym.h	#-HVD support for 825a, 875, 885
367					# disabled:0 (default), enabled:1
368SYM_SETUP_PCI_PARITY	opt_sym.h	#-PCI parity checking
369					# disabled:0, enabled:1 (default)
370SYM_SETUP_MAX_LUN	opt_sym.h	#-Number of LUNs supported
371					# default:8, range:[1..64]
372
373# Options used only in dev/ncr/*
374SCSI_NCR_DEBUG		opt_ncr.h
375SCSI_NCR_MAX_SYNC	opt_ncr.h
376SCSI_NCR_MAX_WIDE	opt_ncr.h
377SCSI_NCR_MYADDR		opt_ncr.h
378
379# Options used only in dev/isp/*
380ISP_TARGET_MODE		opt_isp.h
381ISP_FW_CRASH_DUMP	opt_isp.h
382ISP_DEFAULT_ROLES	opt_isp.h
383ISP_INTERNAL_TARGET	opt_isp.h
384
385# Options used only in dev/iscsi
386ISCSI_INITIATOR_DEBUG	opt_iscsi_initiator.h
387
388# Net stuff.
389ACCEPT_FILTER_DATA
390ACCEPT_FILTER_DNS
391ACCEPT_FILTER_HTTP
392ALTQ			opt_global.h
393ALTQ_CBQ		opt_altq.h
394ALTQ_CDNR		opt_altq.h
395ALTQ_CODEL		opt_altq.h
396ALTQ_DEBUG		opt_altq.h
397ALTQ_HFSC		opt_altq.h
398ALTQ_FAIRQ		opt_altq.h
399ALTQ_NOPCC		opt_altq.h
400ALTQ_PRIQ		opt_altq.h
401ALTQ_RED		opt_altq.h
402ALTQ_RIO		opt_altq.h
403BOOTP			opt_bootp.h
404BOOTP_BLOCKSIZE		opt_bootp.h
405BOOTP_COMPAT		opt_bootp.h
406BOOTP_NFSROOT		opt_bootp.h
407BOOTP_NFSV3		opt_bootp.h
408BOOTP_WIRED_TO		opt_bootp.h
409DEVICE_POLLING
410DUMMYNET		opt_ipdn.h
411INET			opt_inet.h
412INET6			opt_inet6.h
413IPDIVERT
414IPFILTER		opt_ipfilter.h
415IPFILTER_DEFAULT_BLOCK	opt_ipfilter.h
416IPFILTER_LOG		opt_ipfilter.h
417IPFILTER_LOOKUP		opt_ipfilter.h
418IPFIREWALL		opt_ipfw.h
419IPFIREWALL_DEFAULT_TO_ACCEPT	opt_ipfw.h
420IPFIREWALL_NAT		opt_ipfw.h
421IPFIREWALL_VERBOSE	opt_ipfw.h
422IPFIREWALL_VERBOSE_LIMIT	opt_ipfw.h
423IPSEC			opt_ipsec.h
424IPSEC_DEBUG		opt_ipsec.h
425IPSEC_FILTERTUNNEL	opt_ipsec.h
426IPSEC_NAT_T		opt_ipsec.h
427IPSTEALTH
428KRPC
429LIBALIAS
430LIBMBPOOL
431LIBMCHAIN
432MBUF_PROFILING
433MBUF_STRESS_TEST
434MROUTING		opt_mrouting.h
435NFSLOCKD
436PCBGROUP		opt_pcbgroup.h
437PF_DEFAULT_TO_DROP	opt_pf.h
438RADIX_MPATH		opt_mpath.h
439ROUTETABLES		opt_route.h
440RSS			opt_rss.h
441SLIP_IFF_OPTS		opt_slip.h
442TCPDEBUG
443TCPPCAP		opt_global.h
444SIFTR
445TCP_OFFLOAD		opt_inet.h # Enable code to dispatch TCP offloading
446TCP_RFC7413		opt_inet.h
447TCP_RFC7413_MAX_KEYS	opt_inet.h
448TCP_SIGNATURE		opt_inet.h
449VLAN_ARRAY		opt_vlan.h
450XBONEHACK
451FLOWTABLE		opt_route.h
452FLOWTABLE_HASH_ALL	opt_route.h
453
454#
455# SCTP
456#
457SCTP			opt_sctp.h
458SCTP_DEBUG		opt_sctp.h # Enable debug printfs
459SCTP_WITH_NO_CSUM	opt_sctp.h # Use this at your peril
460SCTP_LOCK_LOGGING	opt_sctp.h # Log to KTR lock activity
461SCTP_MBUF_LOGGING	opt_sctp.h # Log to KTR general mbuf aloc/free
462SCTP_MBCNT_LOGGING	opt_sctp.h # Log to KTR mbcnt activity
463SCTP_PACKET_LOGGING	opt_sctp.h # Log to a packet buffer last N packets
464SCTP_LTRACE_CHUNKS	opt_sctp.h # Log to KTR chunks processed
465SCTP_LTRACE_ERRORS	opt_sctp.h # Log to KTR error returns.
466SCTP_USE_PERCPU_STAT	opt_sctp.h # Use per cpu stats.
467SCTP_MCORE_INPUT	opt_sctp.h # Have multiple input threads for input mbufs
468SCTP_LOCAL_TRACE_BUF	opt_sctp.h # Use tracebuffer exported via sysctl
469SCTP_DETAILED_STR_STATS	opt_sctp.h # Use per PR-SCTP policy stream stats
470#
471#
472#
473
474# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
475# Each netgraph node type can be either be compiled into the kernel
476# or loaded dynamically. To get the former, include the corresponding
477# option below. Each type has its own man page, e.g. ng_async(4).
478NETGRAPH
479NETGRAPH_DEBUG		opt_netgraph.h
480NETGRAPH_ASYNC		opt_netgraph.h
481NETGRAPH_ATMLLC		opt_netgraph.h
482NETGRAPH_ATM_ATMPIF	opt_netgraph.h
483NETGRAPH_BLUETOOTH	opt_netgraph.h
484NETGRAPH_BLUETOOTH_BT3C	opt_netgraph.h
485NETGRAPH_BLUETOOTH_H4	opt_netgraph.h
486NETGRAPH_BLUETOOTH_HCI	opt_netgraph.h
487NETGRAPH_BLUETOOTH_L2CAP	opt_netgraph.h
488NETGRAPH_BLUETOOTH_SOCKET	opt_netgraph.h
489NETGRAPH_BLUETOOTH_UBT	opt_netgraph.h
490NETGRAPH_BLUETOOTH_UBTBCMFW	opt_netgraph.h
491NETGRAPH_BPF		opt_netgraph.h
492NETGRAPH_BRIDGE		opt_netgraph.h
493NETGRAPH_CAR		opt_netgraph.h
494NETGRAPH_CISCO		opt_netgraph.h
495NETGRAPH_DEFLATE	opt_netgraph.h
496NETGRAPH_DEVICE		opt_netgraph.h
497NETGRAPH_ECHO		opt_netgraph.h
498NETGRAPH_EIFACE		opt_netgraph.h
499NETGRAPH_ETHER		opt_netgraph.h
500NETGRAPH_ETHER_ECHO	opt_netgraph.h
501NETGRAPH_FEC		opt_netgraph.h
502NETGRAPH_FRAME_RELAY	opt_netgraph.h
503NETGRAPH_GIF		opt_netgraph.h
504NETGRAPH_GIF_DEMUX	opt_netgraph.h
505NETGRAPH_HOLE		opt_netgraph.h
506NETGRAPH_IFACE		opt_netgraph.h
507NETGRAPH_IP_INPUT	opt_netgraph.h
508NETGRAPH_IPFW		opt_netgraph.h
509NETGRAPH_KSOCKET	opt_netgraph.h
510NETGRAPH_L2TP		opt_netgraph.h
511NETGRAPH_LMI		opt_netgraph.h
512# MPPC compression requires proprietary files (not included)
513NETGRAPH_MPPC_COMPRESSION	opt_netgraph.h
514NETGRAPH_MPPC_ENCRYPTION	opt_netgraph.h
515NETGRAPH_NAT		opt_netgraph.h
516NETGRAPH_NETFLOW	opt_netgraph.h
517NETGRAPH_ONE2MANY	opt_netgraph.h
518NETGRAPH_PATCH		opt_netgraph.h
519NETGRAPH_PIPE		opt_netgraph.h
520NETGRAPH_PPP		opt_netgraph.h
521NETGRAPH_PPPOE		opt_netgraph.h
522NETGRAPH_PPTPGRE	opt_netgraph.h
523NETGRAPH_PRED1		opt_netgraph.h
524NETGRAPH_RFC1490	opt_netgraph.h
525NETGRAPH_SOCKET		opt_netgraph.h
526NETGRAPH_SPLIT		opt_netgraph.h
527NETGRAPH_SPPP		opt_netgraph.h
528NETGRAPH_TAG		opt_netgraph.h
529NETGRAPH_TCPMSS		opt_netgraph.h
530NETGRAPH_TEE		opt_netgraph.h
531NETGRAPH_TTY		opt_netgraph.h
532NETGRAPH_UI		opt_netgraph.h
533NETGRAPH_VJC		opt_netgraph.h
534NETGRAPH_VLAN		opt_netgraph.h
535
536# NgATM options
537NGATM_ATM		opt_netgraph.h
538NGATM_ATMBASE		opt_netgraph.h
539NGATM_SSCOP		opt_netgraph.h
540NGATM_SSCFU		opt_netgraph.h
541NGATM_UNI		opt_netgraph.h
542NGATM_CCATM		opt_netgraph.h
543
544# DRM options
545DRM_DEBUG		opt_drm.h
546
547TI_SF_BUF_JUMBO		opt_ti.h
548TI_JUMBO_HDRSPLIT	opt_ti.h
549
550# XXX Conflict: # of devices vs network protocol (Native ATM).
551# This makes "atm.h" unusable.
552NATM
553
554# DPT driver debug flags
555DPT_MEASURE_PERFORMANCE	opt_dpt.h
556DPT_RESET_HBA		opt_dpt.h
557
558# Misc debug flags.  Most of these should probably be replaced with
559# 'DEBUG', and then let people recompile just the interesting modules
560# with 'make CC="cc -DDEBUG"'.
561CLUSTERDEBUG		opt_debug_cluster.h
562DEBUG_1284		opt_ppb_1284.h
563VP0_DEBUG		opt_vpo.h
564LPT_DEBUG		opt_lpt.h
565PLIP_DEBUG		opt_plip.h
566LOCKF_DEBUG		opt_debug_lockf.h
567SI_DEBUG		opt_debug_si.h
568IFMEDIA_DEBUG		opt_ifmedia.h
569
570# Fb options
571FB_DEBUG		opt_fb.h
572FB_INSTALL_CDEV		opt_fb.h
573
574# ppbus related options
575PERIPH_1284		opt_ppb_1284.h
576DONTPROBE_1284		opt_ppb_1284.h
577
578# smbus related options
579ENABLE_ALART		opt_intpm.h
580
581# These cause changes all over the kernel
582BLKDEV_IOSIZE		opt_global.h
583BURN_BRIDGES		opt_global.h
584DEBUG			opt_global.h
585DEBUG_LOCKS		opt_global.h
586DEBUG_VFS_LOCKS		opt_global.h
587DFLTPHYS		opt_global.h
588DIAGNOSTIC		opt_global.h
589INVARIANT_SUPPORT	opt_global.h
590INVARIANTS		opt_global.h
591MAXCPU			opt_global.h
592MAXMEMDOM		opt_global.h
593MAXPHYS			opt_global.h
594MCLSHIFT		opt_global.h
595MUTEX_DEBUG		opt_global.h
596MUTEX_NOINLINE		opt_global.h
597LOCK_PROFILING		opt_global.h
598LOCK_PROFILING_FAST	opt_global.h
599MSIZE			opt_global.h
600REGRESSION		opt_global.h
601RWLOCK_NOINLINE		opt_global.h
602SX_NOINLINE		opt_global.h
603VFS_BIO_DEBUG		opt_global.h
604
605# These are VM related options
606VM_KMEM_SIZE		opt_vm.h
607VM_KMEM_SIZE_SCALE	opt_vm.h
608VM_KMEM_SIZE_MAX	opt_vm.h
609VM_NRESERVLEVEL		opt_vm.h
610VM_LEVEL_0_ORDER	opt_vm.h
611NO_SWAPPING		opt_vm.h
612MALLOC_MAKE_FAILURES	opt_vm.h
613MALLOC_PROFILE		opt_vm.h
614MALLOC_DEBUG_MAXZONES	opt_vm.h
615
616# The MemGuard replacement allocator used for tamper-after-free detection
617DEBUG_MEMGUARD		opt_vm.h
618
619# The RedZone malloc(9) protection
620DEBUG_REDZONE		opt_vm.h
621
622# Standard SMP options
623SMP			opt_global.h
624
625# Size of the kernel message buffer
626MSGBUF_SIZE		opt_msgbuf.h
627
628# NFS options
629NFS_MINATTRTIMO		opt_nfs.h
630NFS_MAXATTRTIMO		opt_nfs.h
631NFS_MINDIRATTRTIMO	opt_nfs.h
632NFS_MAXDIRATTRTIMO	opt_nfs.h
633NFS_DEBUG		opt_nfs.h
634
635# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
636OVERRIDE_CARD			opt_bktr.h
637OVERRIDE_TUNER			opt_bktr.h
638OVERRIDE_DBX			opt_bktr.h
639OVERRIDE_MSP			opt_bktr.h
640BROOKTREE_SYSTEM_DEFAULT	opt_bktr.h
641BROOKTREE_ALLOC_PAGES		opt_bktr.h
642BKTR_OVERRIDE_CARD		opt_bktr.h
643BKTR_OVERRIDE_TUNER		opt_bktr.h
644BKTR_OVERRIDE_DBX		opt_bktr.h
645BKTR_OVERRIDE_MSP		opt_bktr.h
646BKTR_SYSTEM_DEFAULT		opt_bktr.h
647BKTR_ALLOC_PAGES		opt_bktr.h
648BKTR_USE_PLL			opt_bktr.h
649BKTR_GPIO_ACCESS		opt_bktr.h
650BKTR_NO_MSP_RESET		opt_bktr.h
651BKTR_430_FX_MODE		opt_bktr.h
652BKTR_SIS_VIA_MODE		opt_bktr.h
653BKTR_USE_FREEBSD_SMBUS		opt_bktr.h
654BKTR_NEW_MSP34XX_DRIVER		opt_bktr.h
655
656# Options for uart(4)
657UART_PPS_ON_CTS		opt_uart.h
658UART_POLL_FREQ		opt_uart.h
659UART_DEV_TOLERANCE_PCT	opt_uart.h
660
661# options for bus/device framework
662BUS_DEBUG		opt_bus.h
663
664# options for USB support
665USB_DEBUG		opt_usb.h
666USB_HOST_ALIGN		opt_usb.h
667USB_REQ_DEBUG		opt_usb.h
668USB_TEMPLATE		opt_usb.h
669USB_VERBOSE		opt_usb.h
670USB_DMA_SINGLE_ALLOC	opt_usb.h
671USB_EHCI_BIG_ENDIAN_DESC	opt_usb.h
672U3G_DEBUG		opt_u3g.h
673UKBD_DFLT_KEYMAP	opt_ukbd.h
674UPLCOM_INTR_INTERVAL	opt_uplcom.h
675UVSCOM_DEFAULT_OPKTSIZE	opt_uvscom.h
676UVSCOM_INTR_INTERVAL	opt_uvscom.h
677
678# Embedded system options
679INIT_PATH
680
681ROOTDEVNAME
682
683FDC_DEBUG		opt_fdc.h
684PCFCLOCK_VERBOSE	opt_pcfclock.h
685PCFCLOCK_MAX_RETRIES	opt_pcfclock.h
686
687KTR			opt_global.h
688KTR_ALQ			opt_ktr.h
689KTR_MASK		opt_ktr.h
690KTR_CPUMASK		opt_ktr.h
691KTR_COMPILE		opt_global.h
692KTR_BOOT_ENTRIES	opt_global.h
693KTR_ENTRIES		opt_global.h
694KTR_VERBOSE		opt_ktr.h
695WITNESS			opt_global.h
696WITNESS_KDB		opt_witness.h
697WITNESS_NO_VNODE	opt_witness.h
698WITNESS_SKIPSPIN	opt_witness.h
699WITNESS_COUNT		opt_witness.h
700OPENSOLARIS_WITNESS	opt_global.h
701
702# options for ACPI support
703ACPI_DEBUG		opt_acpi.h
704ACPI_MAX_TASKS		opt_acpi.h
705ACPI_MAX_THREADS	opt_acpi.h
706ACPI_DMAR		opt_acpi.h
707DEV_ACPI		opt_acpi.h
708
709# ISA support
710DEV_ISA			opt_isa.h
711ISAPNP			opt_isa.h
712
713# various 'device presence' options.
714DEV_BPF			opt_bpf.h
715DEV_CARP		opt_carp.h
716DEV_MCA			opt_mca.h
717DEV_NETMAP		opt_global.h
718DEV_PCI			opt_pci.h
719DEV_PF			opt_pf.h
720DEV_PFLOG		opt_pf.h
721DEV_PFSYNC		opt_pf.h
722DEV_RANDOM		opt_global.h
723DEV_SPLASH		opt_splash.h
724DEV_VLAN		opt_vlan.h
725
726# EISA support
727DEV_EISA		opt_eisa.h
728EISA_SLOTS		opt_eisa.h
729
730# ed driver
731ED_HPP			opt_ed.h
732ED_3C503		opt_ed.h
733ED_SIC			opt_ed.h
734
735# bce driver
736BCE_DEBUG		opt_bce.h
737BCE_NVRAM_WRITE_SUPPORT	opt_bce.h
738
739SOCKBUF_DEBUG		opt_global.h
740
741
742# options for ubsec driver
743UBSEC_DEBUG		opt_ubsec.h
744UBSEC_RNDTEST		opt_ubsec.h
745UBSEC_NO_RNG		opt_ubsec.h
746
747# options for hifn driver
748HIFN_DEBUG		opt_hifn.h
749HIFN_RNDTEST		opt_hifn.h
750
751# options for safenet driver
752SAFE_DEBUG		opt_safe.h
753SAFE_NO_RNG		opt_safe.h
754SAFE_RNDTEST		opt_safe.h
755
756# syscons/vt options
757MAXCONS			opt_syscons.h
758SC_ALT_MOUSE_IMAGE	opt_syscons.h
759SC_CUT_SPACES2TABS	opt_syscons.h
760SC_CUT_SEPCHARS		opt_syscons.h
761SC_DEBUG_LEVEL		opt_syscons.h
762SC_DFLT_FONT		opt_syscons.h
763SC_DISABLE_KDBKEY	opt_syscons.h
764SC_DISABLE_REBOOT	opt_syscons.h
765SC_HISTORY_SIZE		opt_syscons.h
766SC_KERNEL_CONS_ATTR	opt_syscons.h
767SC_KERNEL_CONS_REV_ATTR	opt_syscons.h
768SC_MOUSE_CHAR		opt_syscons.h
769SC_NO_CUTPASTE		opt_syscons.h
770SC_NO_FONT_LOADING	opt_syscons.h
771SC_NO_HISTORY		opt_syscons.h
772SC_NO_MODE_CHANGE	opt_syscons.h
773SC_NO_SUSPEND_VTYSWITCH	opt_syscons.h
774SC_NO_SYSMOUSE		opt_syscons.h
775SC_NORM_ATTR		opt_syscons.h
776SC_NORM_REV_ATTR	opt_syscons.h
777SC_PIXEL_MODE		opt_syscons.h
778SC_RENDER_DEBUG		opt_syscons.h
779SC_TWOBUTTON_MOUSE	opt_syscons.h
780VT_ALT_TO_ESC_HACK	opt_syscons.h
781VT_FB_DEFAULT_WIDTH	opt_syscons.h
782VT_FB_DEFAULT_HEIGHT	opt_syscons.h
783VT_MAXWINDOWS		opt_syscons.h
784VT_TWOBUTTON_MOUSE	opt_syscons.h
785DEV_SC			opt_syscons.h
786DEV_VT			opt_syscons.h
787
788# teken terminal emulator options
789TEKEN_CONS25		opt_teken.h
790TEKEN_UTF8		opt_teken.h
791TERMINAL_KERN_ATTR	opt_teken.h
792TERMINAL_NORM_ATTR	opt_teken.h
793
794# options for printf
795PRINTF_BUFR_SIZE	opt_printf.h
796
797# kbd options
798KBD_DISABLE_KEYMAP_LOAD	opt_kbd.h
799KBD_INSTALL_CDEV	opt_kbd.h
800KBD_MAXRETRY		opt_kbd.h
801KBD_MAXWAIT		opt_kbd.h
802KBD_RESETDELAY		opt_kbd.h
803KBDIO_DEBUG		opt_kbd.h
804
805# options for the Atheros driver
806ATH_DEBUG		opt_ath.h
807ATH_TXBUF		opt_ath.h
808ATH_RXBUF		opt_ath.h
809ATH_DIAGAPI		opt_ath.h
810ATH_TX99_DIAG		opt_ath.h
811ATH_ENABLE_11N		opt_ath.h
812ATH_ENABLE_DFS		opt_ath.h
813ATH_EEPROM_FIRMWARE	opt_ath.h
814ATH_ENABLE_RADIOTAP_VENDOR_EXT	opt_ath.h
815ATH_DEBUG_ALQ		opt_ath.h
816ATH_KTR_INTR_DEBUG	opt_ath.h
817
818# options for the Atheros hal
819AH_SUPPORT_AR5416	opt_ah.h
820# XXX For now, this breaks non-AR9130 chipsets, so only use it
821# XXX when actually targetting AR9130.
822AH_SUPPORT_AR9130	opt_ah.h
823
824# This is required for AR933x SoC support
825AH_SUPPORT_AR9330	opt_ah.h
826AH_SUPPORT_AR9340	opt_ah.h
827AH_SUPPORT_QCA9530	opt_ah.h
828AH_SUPPORT_QCA9550	opt_ah.h
829
830AH_DEBUG		opt_ah.h
831AH_ASSERT		opt_ah.h
832AH_DEBUG_ALQ		opt_ah.h
833AH_REGOPS_FUNC		opt_ah.h
834AH_WRITE_REGDOMAIN	opt_ah.h
835AH_DEBUG_COUNTRY	opt_ah.h
836AH_WRITE_EEPROM		opt_ah.h
837AH_PRIVATE_DIAG		opt_ah.h
838AH_NEED_DESC_SWAP	opt_ah.h
839AH_USE_INIPDGAIN	opt_ah.h
840AH_MAXCHAN		opt_ah.h
841AH_RXCFG_SDMAMW_4BYTES	opt_ah.h
842AH_INTERRUPT_DEBUGGING	opt_ah.h
843# AR5416 and later interrupt mitigation
844# XXX do not use this for AR9130
845AH_AR5416_INTERRUPT_MITIGATION	opt_ah.h
846
847# options for the Broadcom BCM43xx driver (bwi)
848BWI_DEBUG		opt_bwi.h
849BWI_DEBUG_VERBOSE	opt_bwi.h
850
851# options for the Marvell 8335 wireless driver
852MALO_DEBUG		opt_malo.h
853MALO_TXBUF		opt_malo.h
854MALO_RXBUF		opt_malo.h
855
856# options for the Marvell wireless driver
857MWL_DEBUG		opt_mwl.h
858MWL_TXBUF		opt_mwl.h
859MWL_RXBUF		opt_mwl.h
860MWL_DIAGAPI		opt_mwl.h
861MWL_AGGR_SIZE		opt_mwl.h
862MWL_TX_NODROP		opt_mwl.h
863
864# Options for the Intel 802.11ac wireless driver
865IWM_DEBUG		opt_iwm.h
866
867# Options for the Intel 802.11n wireless driver
868IWN_DEBUG		opt_iwn.h
869
870# Options for the Intel 3945ABG wireless driver
871WPI_DEBUG		opt_wpi.h
872
873# dcons options
874DCONS_BUF_SIZE		opt_dcons.h
875DCONS_POLL_HZ		opt_dcons.h
876DCONS_FORCE_CONSOLE	opt_dcons.h
877DCONS_FORCE_GDB		opt_dcons.h
878
879# HWPMC options
880HWPMC_DEBUG		opt_global.h
881HWPMC_HOOKS
882HWPMC_MIPS_BACKTRACE 	opt_hwpmc_hooks.h
883
884# XBOX options for FreeBSD/i386, but some files are MI
885XBOX			opt_xbox.h
886
887# Interrupt filtering
888INTR_FILTER
889
890# 802.11 support layer
891IEEE80211_DEBUG		opt_wlan.h
892IEEE80211_DEBUG_REFCNT	opt_wlan.h
893IEEE80211_AMPDU_AGE	opt_wlan.h
894IEEE80211_SUPPORT_MESH	opt_wlan.h
895IEEE80211_SUPPORT_SUPERG	opt_wlan.h
896IEEE80211_SUPPORT_TDMA	opt_wlan.h
897IEEE80211_ALQ		opt_wlan.h
898IEEE80211_DFS_DEBUG	opt_wlan.h
899
900# 802.11 TDMA support
901TDMA_SLOTLEN_DEFAULT	opt_tdma.h
902TDMA_SLOTCNT_DEFAULT	opt_tdma.h
903TDMA_BINTVAL_DEFAULT	opt_tdma.h
904TDMA_TXRATE_11B_DEFAULT	opt_tdma.h
905TDMA_TXRATE_11G_DEFAULT	opt_tdma.h
906TDMA_TXRATE_11A_DEFAULT	opt_tdma.h
907TDMA_TXRATE_TURBO_DEFAULT	opt_tdma.h
908TDMA_TXRATE_HALF_DEFAULT	opt_tdma.h
909TDMA_TXRATE_QUARTER_DEFAULT	opt_tdma.h
910TDMA_TXRATE_11NA_DEFAULT	opt_tdma.h
911TDMA_TXRATE_11NG_DEFAULT	opt_tdma.h
912
913# VideoMode
914PICKMODE_DEBUG			opt_videomode.h
915
916# Network stack virtualization options
917VIMAGE			opt_global.h
918VNET_DEBUG		opt_global.h
919
920# Common Flash Interface (CFI) options
921CFI_SUPPORT_STRATAFLASH	opt_cfi.h
922CFI_ARMEDANDDANGEROUS	opt_cfi.h
923
924# Sound options
925SND_DEBUG		opt_snd.h
926SND_DIAGNOSTIC		opt_snd.h
927SND_FEEDER_MULTIFORMAT	opt_snd.h
928SND_FEEDER_FULL_MULTIFORMAT	opt_snd.h
929SND_FEEDER_RATE_HP	opt_snd.h
930SND_PCM_64		opt_snd.h
931SND_OLDSTEREO		opt_snd.h
932
933X86BIOS
934
935# Flattened device tree options
936FDT		opt_platform.h
937FDT_DTB_STATIC	opt_platform.h
938
939# OFED Infiniband stack
940OFED		opt_ofed.h
941OFED_DEBUG_INIT	opt_ofed.h
942SDP		opt_ofed.h
943SDP_DEBUG	opt_ofed.h
944IPOIB		opt_ofed.h
945IPOIB_DEBUG	opt_ofed.h
946IPOIB_CM	opt_ofed.h
947
948# Resource Accounting
949RACCT		opt_global.h
950RACCT_DEFAULT_TO_DISABLED	opt_global.h
951
952# Resource Limits
953RCTL		opt_global.h
954
955# Random number generator(s)
956# Which CSPRNG hash we get.
957# If Yarrow is not chosen, Fortuna is selected.
958RANDOM_YARROW	opt_global.h
959# With this, no entropy processor is loaded, but the entropy
960# harvesting infrastructure is present. This means an entropy
961# processor may be loaded as a module.
962RANDOM_LOADABLE	opt_global.h
963# This turns on high-rate and potentially expensive harvesting in
964# the uma slab allocator.
965RANDOM_ENABLE_UMA	opt_global.h
966
967# Mach support options
968COMPAT_MACH_STATIC
969COMPAT_MACH_PORT_DEBUG opt_compat_mach.h
970
971
972# Intel em(4) driver
973EM_MULTIQUEUE	opt_em.h
974
975# stock VM without scaling improvements
976VM_LEGACY  		opt_global.h
977