xref: /NextBSD/etc/network.subr (revision c21ffb8d6aca32c9584cfa072f309a5890a21aea)
1#
2# Copyright (c) 2003 The FreeBSD Project. All rights reserved.
3#
4# Redistribution and use in source and binary forms, with or without
5# modification, are permitted provided that the following conditions
6# are met:
7# 1. Redistributions of source code must retain the above copyright
8#    notice, this list of conditions and the following disclaimer.
9# 2. Redistributions in binary form must reproduce the above copyright
10#    notice, this list of conditions and the following disclaimer in the
11#    documentation and/or other materials provided with the distribution.
12#
13# THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
14# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16# ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
17# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23# SUCH DAMAGE.
24#
25# $FreeBSD$
26#
27IFCONFIG_CMD="/sbin/ifconfig"
28: ${netif_ipexpand_max:=2048}
29
30#
31# Subroutines commonly used from network startup scripts.
32# Requires that rc.conf be loaded first.
33#
34
35# ifn_start ifn
36#	Bring up and configure an interface.  If some configuration is
37#	applied, print the interface configuration.
38#
39ifn_start()
40{
41	local ifn cfg
42	ifn="$1"
43	cfg=1
44
45	[ -z "$ifn" ] && err 1 "ifn_start called without an interface"
46
47	ifscript_up ${ifn} && cfg=0
48	ifconfig_up ${ifn} && cfg=0
49	if ! noafif $ifn; then
50		afexists inet && ipv4_up ${ifn} && cfg=0
51		afexists inet6 && ipv6_up ${ifn} && cfg=0
52	fi
53	childif_create ${ifn} && cfg=0
54
55	return $cfg
56}
57
58# ifn_stop ifn
59#	Shutdown and de-configure an interface.  If action is taken,
60#	print the interface name.
61#
62ifn_stop()
63{
64	local ifn cfg
65	ifn="$1"
66	cfg=1
67
68	[ -z "$ifn" ] && err 1 "ifn_stop called without an interface"
69
70	if ! noafif $ifn; then
71		afexists inet6 && ipv6_down ${ifn} && cfg=0
72		afexists inet && ipv4_down ${ifn} && cfg=0
73	fi
74	ifconfig_down ${ifn} && cfg=0
75	ifscript_down ${ifn} && cfg=0
76	childif_destroy ${ifn} && cfg=0
77
78	return $cfg
79}
80
81# ifn_vnetup ifn
82#	Move ifn to the specified vnet jail.
83#
84ifn_vnetup()
85{
86
87	ifn_vnet0 $1 vnet
88}
89
90# ifn_vnetdown ifn
91#	Reclaim ifn from the specified vnet jail.
92#
93ifn_vnetdown()
94{
95
96	ifn_vnet0 $1 -vnet
97}
98
99# ifn_vnet0 ifn action
100#	Helper function for ifn_vnetup and ifn_vnetdown.
101#
102ifn_vnet0()
103{
104	local _ifn _cfg _action _vnet
105	_ifn="$1"
106	_action="$2"
107	_cfg=1
108
109	if _vnet=$(vnetif $_ifn); then
110		${IFCONFIG_CMD} $_ifn $_action $_vnet && _cfg=0
111	fi
112
113	return $_cfg
114}
115
116# ifconfig_up if
117#	Evaluate ifconfig(8) arguments for interface $if and
118#	run ifconfig(8) with those arguments. It returns 0 if
119#	arguments were found and executed or 1 if the interface
120#	had no arguments.  Pseudo arguments DHCP and WPA are handled
121#	here.
122#
123ifconfig_up()
124{
125	local _cfg _ipv6_opts ifconfig_args
126	_cfg=1
127
128	# Make sure lo0 always comes up.
129	if [ "$1" = "lo0" ]; then
130		_cfg=0
131	fi
132
133	# inet6 specific
134	if ! noafif $1 && afexists inet6; then
135		if checkyesno ipv6_activate_all_interfaces; then
136			_ipv6_opts="-ifdisabled"
137		elif [ "$1" != "lo0" ]; then
138			_ipv6_opts="ifdisabled"
139		fi
140
141		# backward compatibility: $ipv6_enable
142		case $ipv6_enable in
143		[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
144			case $1 in
145			bridge[0-9]*)
146				# No accept_rtadv by default on if_bridge(4)
147				# to avoid a conflict with the member
148				# interfaces.
149			;;
150			*)
151				if ! checkyesno ipv6_gateway_enable; then
152					_ipv6_opts="${_ipv6_opts} accept_rtadv"
153				fi
154			;;
155			esac
156		;;
157		esac
158
159		case $ipv6_cpe_wanif in
160		$1)
161			_ipv6_opts="${_ipv6_opts} -no_radr accept_rtadv"
162		;;
163		esac
164
165		if [ -n "${_ipv6_opts}" ]; then
166			${IFCONFIG_CMD} $1 inet6 ${_ipv6_opts}
167		fi
168	fi
169
170	# ifconfig_IF
171	ifconfig_args=`ifconfig_getargs $1`
172	if [ -n "${ifconfig_args}" ]; then
173		eval ${IFCONFIG_CMD} $1 ${ifconfig_args}
174		_cfg=0
175	fi
176
177	# inet6 specific
178	if ! noafif $1 && afexists inet6; then
179		# ifconfig_IF_ipv6
180		ifconfig_args=`ifconfig_getargs $1 ipv6`
181		if [ -n "${ifconfig_args}" ]; then
182			# backward compatibility: inet6 keyword
183			case "${ifconfig_args}" in
184			:*|[0-9a-fA-F]*:*)
185				warn "\$ifconfig_$1_ipv6 needs leading" \
186				    "\"inet6\" keyword for an IPv6 address."
187				ifconfig_args="inet6 ${ifconfig_args}"
188			;;
189			esac
190			${IFCONFIG_CMD} $1 inet6 -ifdisabled
191			eval ${IFCONFIG_CMD} $1 ${ifconfig_args}
192			_cfg=0
193		fi
194
195		# $ipv6_prefix_IF will be handled in
196		# ipv6_prefix_hostid_addr_common().
197		ifconfig_args=`get_if_var $1 ipv6_prefix_IF`
198		if [ -n "${ifconfig_args}" ]; then
199			${IFCONFIG_CMD} $1 inet6 -ifdisabled
200			_cfg=0
201		fi
202
203		# backward compatibility: $ipv6_ifconfig_IF
204		ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF`
205		if [ -n "${ifconfig_args}" ]; then
206			warn "\$ipv6_ifconfig_$1 is obsolete." \
207			    "  Use ifconfig_$1_ipv6 instead."
208			${IFCONFIG_CMD} $1 inet6 -ifdisabled
209			eval ${IFCONFIG_CMD} $1 inet6 ${ifconfig_args}
210			_cfg=0
211		fi
212	fi
213
214	ifalias $1 link alias
215	ifalias $1 ether alias
216
217	if [ ${_cfg} -eq 0 ]; then
218		${IFCONFIG_CMD} $1 up
219	fi
220
221	if wpaif $1; then
222		/etc/rc.d/wpa_supplicant start $1
223		_cfg=0		# XXX: not sure this should count
224	elif hostapif $1; then
225		/etc/rc.d/hostapd start $1
226		_cfg=0
227	fi
228
229	if dhcpif $1; then
230		if [ $_cfg -ne 0 ] ; then
231			${IFCONFIG_CMD} $1 up
232		fi
233		if syncdhcpif $1; then
234			/etc/rc.d/dhclient start $1
235		fi
236		_cfg=0
237	fi
238
239	return $_cfg
240}
241
242# ifconfig_down if
243#	returns 1 if wpa_supplicant or dhclient was stopped or
244#	the interface exists.
245#
246ifconfig_down()
247{
248	local _cfg
249	_cfg=1
250
251	if wpaif $1; then
252		/etc/rc.d/wpa_supplicant stop $1
253		_cfg=0
254	elif hostapif $1; then
255		/etc/rc.d/hostapd stop $1
256		_cfg=0
257	fi
258
259	if dhcpif $1; then
260		/etc/rc.d/dhclient stop $1
261		_cfg=0
262	fi
263
264	if ifexists $1; then
265		${IFCONFIG_CMD} $1 down
266		_cfg=0
267	fi
268
269	return $_cfg
270}
271
272# get_if_var if var [default]
273#	Return the value of the pseudo-hash corresponding to $if where
274#	$var is a string containg the sub-string "IF" which will be
275#	replaced with $if after the characters defined in _punct are
276#	replaced with '_'. If the variable is unset, replace it with
277#	$default if given.
278get_if_var()
279{
280	local _if _punct _punct_c _var _default prefix suffix
281
282	if [ $# -ne 2 -a $# -ne 3 ]; then
283		err 3 'USAGE: get_if_var name var [default]'
284	fi
285
286	_if=$1
287	_punct=".-/+"
288	ltr ${_if} "${_punct}" '_' _if
289	_var=$2
290	_default=$3
291
292	prefix=${_var%%IF*}
293	suffix=${_var##*IF}
294	eval echo \${${prefix}${_if}${suffix}-${_default}}
295}
296
297# _ifconfig_getargs if [af]
298#	Prints the arguments for the supplied interface to stdout.
299#	Returns 1 if empty.  In general, ifconfig_getargs should be used
300#	outside this file.
301_ifconfig_getargs()
302{
303	local _ifn _af
304	_ifn=$1
305	_af=${2+_$2}
306
307	if [ -z "$_ifn" ]; then
308		return 1
309	fi
310
311	get_if_var $_ifn ifconfig_IF$_af "$ifconfig_DEFAULT"
312}
313
314# ifconfig_getargs if [af]
315#	Takes the result from _ifconfig_getargs and removes pseudo
316#	args such as DHCP and WPA.
317ifconfig_getargs()
318{
319	local _tmpargs _arg _args _vnet
320	_tmpargs=`_ifconfig_getargs $1 $2`
321	if [ $? -eq 1 ]; then
322		return 1
323	fi
324	_args=
325	_vnet=0
326
327	for _arg in $_tmpargs; do
328		case $_arg:$_vnet in
329		[Dd][Hh][Cc][Pp]:0) ;;
330		[Nn][Oo][Aa][Uu][Tt][Oo]:0) ;;
331		[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]:0) ;;
332		[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]:0) ;;
333		[Ww][Pp][Aa]:0) ;;
334		[Hh][Oo][Ss][Tt][Aa][Pp]:0) ;;
335		vnet:0)	_vnet=1 ;;
336		*:1)	_vnet=0 ;;
337		*:0)
338			_args="$_args $_arg"
339		;;
340		esac
341	done
342
343	echo $_args
344}
345
346# autoif
347#	Returns 0 if the interface should be automatically configured at
348#	boot time and 1 otherwise.
349autoif()
350{
351	local _tmpargs _arg
352	_tmpargs=`_ifconfig_getargs $1`
353
354	for _arg in $_tmpargs; do
355		case $_arg in
356		[Nn][Oo][Aa][Uu][Tt][Oo])
357			return 1
358			;;
359		esac
360	done
361
362	return 0
363}
364
365# dhcpif if
366#	Returns 0 if the interface is a DHCP interface and 1 otherwise.
367dhcpif()
368{
369	local _tmpargs _arg
370	_tmpargs=`_ifconfig_getargs $1`
371
372	case $1 in
373	lo[0-9]*|\
374	stf[0-9]*|\
375	lp[0-9]*|\
376	sl[0-9]*)
377		return 1
378		;;
379	esac
380	if noafif $1; then
381		return 1
382	fi
383
384	for _arg in $_tmpargs; do
385		case $_arg in
386		[Dd][Hh][Cc][Pp])
387			return 0
388			;;
389		[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
390			return 0
391			;;
392		[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
393			return 0
394			;;
395		esac
396	done
397
398	return 1
399}
400
401# syncdhcpif
402#	Returns 0 if the interface should be configured synchronously and
403#	1 otherwise.
404syncdhcpif()
405{
406	local _tmpargs _arg
407	_tmpargs=`_ifconfig_getargs $1`
408
409	if noafif $1; then
410		return 1
411	fi
412
413	for _arg in $_tmpargs; do
414		case $_arg in
415		[Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
416			return 1
417			;;
418		[Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
419			return 0
420			;;
421		esac
422	done
423
424	checkyesno synchronous_dhclient
425}
426
427# wpaif if
428#	Returns 0 if the interface is a WPA interface and 1 otherwise.
429wpaif()
430{
431	local _tmpargs _arg
432	_tmpargs=`_ifconfig_getargs $1`
433
434	for _arg in $_tmpargs; do
435		case $_arg in
436		[Ww][Pp][Aa])
437			return 0
438			;;
439		esac
440	done
441
442	return 1
443}
444
445# hostapif if
446#	Returns 0 if the interface is a HOSTAP interface and 1 otherwise.
447hostapif()
448{
449	local _tmpargs _arg
450	_tmpargs=`_ifconfig_getargs $1`
451
452	for _arg in $_tmpargs; do
453		case $_arg in
454		[Hh][Oo][Ss][Tt][Aa][Pp])
455			return 0
456			;;
457		esac
458	done
459
460	return 1
461}
462
463# vnetif if
464#	Returns 0 and echo jail if "vnet" keyword is specified on the
465#	interface, and 1 otherwise.
466vnetif()
467{
468	local _tmpargs _arg _vnet
469	_tmpargs=`_ifconfig_getargs $1`
470
471	_vnet=0
472	for _arg in $_tmpargs; do
473		case $_arg:$_vnet in
474		vnet:0)	_vnet=1 ;;
475		*:1)	echo $_arg; return 0 ;;
476		esac
477	done
478
479	return 1
480}
481
482# afexists af
483#	Returns 0 if the address family is enabled in the kernel
484#	1 otherwise.
485afexists()
486{
487	local _af
488	_af=$1
489
490	case ${_af} in
491	inet|inet6)
492		check_kern_features ${_af}
493		;;
494	atm)
495		if [ -x /sbin/atmconfig ]; then
496			/sbin/atmconfig diag list > /dev/null 2>&1
497		else
498			return 1
499		fi
500		;;
501	link|ether)
502		return 0
503		;;
504	*)
505		err 1 "afexists(): Unsupported address family: $_af"
506		;;
507	esac
508}
509
510# noafif if
511#	Returns 0 if the interface has no af configuration and 1 otherwise.
512noafif()
513{
514	local _if
515	_if=$1
516
517	case $_if in
518	pflog[0-9]*|\
519	pfsync[0-9]*|\
520	usbus[0-9]*|\
521	an[0-9]*|\
522	ath[0-9]*|\
523	ipw[0-9]*|\
524	ipfw[0-9]*|\
525	iwi[0-9]*|\
526	iwn[0-9]*|\
527	ral[0-9]*|\
528	wi[0-9]*|\
529	wl[0-9]*|\
530	wpi[0-9]*)
531		return 0
532		;;
533	esac
534
535	return 1
536}
537
538# ipv6if if
539#	Returns 0 if the interface should be configured for IPv6 and
540#	1 otherwise.
541ipv6if()
542{
543	local _if _tmpargs i
544	_if=$1
545
546	if ! afexists inet6; then
547		return 1
548	fi
549
550	# lo0 is always IPv6-enabled
551	case $_if in
552	lo0)
553		return 0
554		;;
555	esac
556
557	case "${ipv6_network_interfaces}" in
558	$_if|"$_if "*|*" $_if"|*" $_if "*|[Aa][Uu][Tt][Oo])
559		# True if $ifconfig_IF_ipv6 is defined.
560		_tmpargs=`_ifconfig_getargs $_if ipv6`
561		if [ -n "${_tmpargs}" ]; then
562			return 0
563		fi
564
565		# True if $ipv6_prefix_IF is defined.
566		_tmpargs=`get_if_var $_if ipv6_prefix_IF`
567		if [ -n "${_tmpargs}" ]; then
568			return 0
569		fi
570
571		# backward compatibility: True if $ipv6_ifconfig_IF is defined.
572		_tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
573		if [ -n "${_tmpargs}" ]; then
574			return 0
575		fi
576		;;
577	esac
578
579	return 1
580}
581
582# ipv6_autoconfif if
583#	Returns 0 if the interface should be configured for IPv6 with
584#	Stateless Address Configuration; 1 otherwise.
585ipv6_autoconfif()
586{
587	local _if _tmpargs _arg
588	_if=$1
589
590	case $_if in
591	lo[0-9]*|\
592	stf[0-9]*|\
593	lp[0-9]*|\
594	sl[0-9]*)
595		return 1
596		;;
597	esac
598	if noafif $_if; then
599		return 1
600	fi
601	if ! ipv6if $_if; then
602		return 1
603	fi
604	if checkyesno ipv6_gateway_enable; then
605		return 1
606	fi
607	_tmpargs=`get_if_var $_if ipv6_prefix_IF`
608	if [ -n "${_tmpargs}" ]; then
609		return 1
610	fi
611	# backward compatibility: $ipv6_enable
612	case $ipv6_enable in
613	[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
614		if checkyesno ipv6_gateway_enable; then
615			return 1
616		fi
617		case $1 in
618		bridge[0-9]*)
619			# No accept_rtadv by default on if_bridge(4)
620			# to avoid a conflict with the member
621			# interfaces.
622			return 1
623		;;
624		*)
625			return 0
626		;;
627		esac
628	;;
629	esac
630
631	_tmpargs=`_ifconfig_getargs $_if ipv6`
632	for _arg in $_tmpargs; do
633		case $_arg in
634		accept_rtadv)
635			return 0
636			;;
637		esac
638	done
639
640	# backward compatibility: $ipv6_ifconfig_IF
641	_tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
642	for _arg in $_tmpargs; do
643		case $_arg in
644		accept_rtadv)
645			return 0
646			;;
647		esac
648	done
649
650	return 1
651}
652
653# ifexists if
654#	Returns 0 if the interface exists and 1 otherwise.
655ifexists()
656{
657	[ -z "$1" ] && return 1
658	${IFCONFIG_CMD} -n $1 > /dev/null 2>&1
659}
660
661# ipv4_up if
662#	add IPv4 addresses to the interface $if
663ipv4_up()
664{
665	local _if _ret
666	_if=$1
667	_ret=1
668
669	# Add 127.0.0.1/8 to lo0 unless otherwise specified.
670	if [ "${_if}" = "lo0" ]; then
671		ifconfig_args=`get_if_var ${_if} ifconfig_IF`
672		if [ -z "${ifconfig_args}" ]; then
673			${IFCONFIG_CMD} ${_if} inet 127.0.0.1/8 alias
674		fi
675	fi
676	ifalias ${_if} inet alias && _ret=0
677
678	return $_ret
679}
680
681# ipv6_up if
682#	add IPv6 addresses to the interface $if
683ipv6_up()
684{
685	local _if _ret
686	_if=$1
687	_ret=1
688
689	if ! ipv6if $_if; then
690		return 0
691	fi
692
693	ifalias ${_if} inet6 alias && _ret=0
694	ipv6_prefix_hostid_addr_common ${_if} alias && _ret=0
695	ipv6_accept_rtadv_up ${_if} && _ret=0
696
697	return $_ret
698}
699
700# ipv4_down if
701#	remove IPv4 addresses from the interface $if
702ipv4_down()
703{
704	local _if _ifs _ret inetList oldifs _inet
705	_if=$1
706	_ifs="^"
707	_ret=1
708
709	ifalias ${_if} inet -alias && _ret=0
710
711	inetList="`${IFCONFIG_CMD} ${_if} | grep 'inet ' | tr "\n\t" "$_ifs"`"
712
713	oldifs="$IFS"
714	IFS="$_ifs"
715	for _inet in $inetList ; do
716		# get rid of extraneous line
717		case $_inet in
718		inet\ *)	;;
719		*)		continue ;;
720		esac
721
722		_inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
723
724		IFS="$oldifs"
725		${IFCONFIG_CMD} ${_if} ${_inet} delete
726		IFS="$_ifs"
727		_ret=0
728	done
729	IFS="$oldifs"
730
731	return $_ret
732}
733
734# ipv6_down if
735#	remove IPv6 addresses from the interface $if
736ipv6_down()
737{
738	local _if _ifs _ret inetList oldifs _inet6
739	_if=$1
740	_ifs="^"
741	_ret=1
742
743	if ! ipv6if $_if; then
744		return 0
745	fi
746
747	ipv6_accept_rtadv_down ${_if} && _ret=0
748	ipv6_prefix_hostid_addr_common ${_if} -alias && _ret=0
749	ifalias ${_if} inet6 -alias && _ret=0
750
751	inetList="`${IFCONFIG_CMD} ${_if} | grep 'inet6 ' | tr "\n\t" "$_ifs"`"
752
753	oldifs="$IFS"
754	IFS="$_ifs"
755	for _inet6 in $inetList ; do
756		# get rid of extraneous line
757		case $_inet6 in
758		inet6\ *)	;;
759		*)		continue ;;
760		esac
761
762		_inet6=`expr "$_inet6" : '.*\(inet6 \([0-9a-f:]*\)\).*'`
763
764		IFS="$oldifs"
765		${IFCONFIG_CMD} ${_if} ${_inet6} -alias
766		IFS="$_ifs"
767		_ret=0
768	done
769	IFS="$oldifs"
770
771	return $_ret
772}
773
774# ifalias if af action
775#	Configure or remove aliases for network interface $if.
776#	It returns 0 if at least one alias was configured or
777#	removed, or 1 if there were none.
778#
779ifalias()
780{
781	local _ret
782	_ret=1
783
784	afexists $2 || return $_ret
785
786	case "$2" in
787	inet|inet6|link|ether)
788		ifalias_af_common $1 $2 $3 && _ret=0
789		;;
790	esac
791
792	return $_ret
793}
794
795# ifalias_expand_addr af action addr
796#	Expand address range ("N-M") specification in addr.
797#	"addr" must not include an address-family keyword.
798#	The results will include an address-family keyword.
799#
800ifalias_expand_addr()
801{
802	local _af _action
803
804	_af=$1
805	_action=$2
806	shift 2
807
808	afexists $_af || return
809	ifalias_expand_addr_$_af $_action $*
810}
811
812# ifalias_expand_addr_inet action addr
813#	Helper function for ifalias_expand_addr().  Handles IPv4.
814#
815ifalias_expand_addr_inet()
816{
817	local _action _arg _cidr _cidr_addr _exargs
818	local _ipaddr _plen _range _iphead _iptail _iplow _iphigh _ipcount
819	local _retstr _c
820	_action=$1
821	_arg=$2
822	shift 2
823	_exargs=$*
824	_retstr=
825
826	case $_action:$_arg:$_exargs in
827	*:*--*)		return ;;	# invalid
828	tmp:*[0-9]-[0-9]*:*)		# to be expanded
829		_action="alias"
830	;;
831	*:*[0-9]-[0-9]*:*)		# to be expanded
832	;;
833	tmp:*:*netmask*)		# already expanded w/ netmask option
834		echo ${_arg%/[0-9]*} $_exargs && return
835	;;
836	tmp:*:*)			# already expanded w/o netmask option
837		echo $_arg $_exargs && return
838	;;
839	*:*:*netmask*)			# already expanded w/ netmask option
840		echo inet ${_arg%/[0-9]*} $_exargs && return
841	;;
842	*:*:*)				# already expanded w/o netmask option
843		echo inet $_arg $_exargs && return
844	;;
845	esac
846
847	for _cidr in $_arg; do
848		_ipaddr=${_cidr%%/*}
849		_plen=${_cidr##*/}
850		# When subnet prefix length is not specified, use /32.
851		case $_plen in
852		$_ipaddr)	_plen=32 ;;	# "/" character not found
853		esac
854
855		OIFS=$IFS
856		IFS=. set -- $_ipaddr
857		_range=
858		_iphead=
859		_iptail=
860		for _c in $@; do
861			case $_range:$_c in
862			:[0-9]*-[0-9]*)
863				_range=$_c
864			;;
865			:*)
866				_iphead="${_iphead}${_iphead:+.}${_c}"
867			;;
868			*:*)
869				_iptail="${_iptail}${_iptail:+.}${_c}"
870			;;
871			esac
872		done
873		IFS=$OIFS
874		_iplow=${_range%-*}
875		_iphigh=${_range#*-}
876
877		# clear netmask when removing aliases
878		if [ "$_action" = "-alias" ]; then
879			_plen=""
880		fi
881
882		_ipcount=$_iplow
883		while [ "$_ipcount" -le "$_iphigh" ]; do
884			_retstr="${_retstr} ${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail}${_plen:+/}${_plen}"
885			if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]; then
886				warn "Range specification is too large (${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_iphigh}${_iptail:+.}${_iptail}).  ${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail} was processed.  Increase \$netif_ipexpand_max in rc.conf."
887				break
888			else
889				_ipcount=$(($_ipcount + 1))
890			fi
891			# Forcibly set /32 for remaining aliases.
892			_plen=32
893		done
894	done
895
896	for _c in $_retstr; do
897		ifalias_expand_addr_inet $_action $_c $_exargs
898	done
899}
900
901# ifalias_expand_addr_inet6 action addr
902#	Helper function for ifalias_expand_addr().  Handles IPv6.
903#
904ifalias_expand_addr_inet6()
905{
906	local _action _arg _cidr _cidr_addr _exargs
907	local _ipaddr _plen _ipleft _ipright _iplow _iphigh _ipcount
908	local _ipv4part
909	local _retstr _c
910	_action=$1
911	_arg=$2
912	shift 2
913	_exargs=$*
914	_retstr=
915
916	case $_action:$_arg:$_exargs in
917	*:*--*:*)	return ;;	# invalid
918	tmp:*[0-9a-zA-Z]-[0-9a-zA-Z]*:*)# to be expanded
919		_action="alias"
920	;;
921	*:*[0-9a-zA-Z]-[0-9a-zA-Z]*:*)	# to be expanded
922	;;
923	tmp:*:*prefixlen*)	# already expanded w/ prefixlen option
924		echo ${_arg%/[0-9]*} $_exargs && return
925	;;
926	tmp:*:*)		# already expanded w/o prefixlen option
927		echo $_arg $_exargs && return
928	;;
929	*:*:*prefixlen*)	# already expanded w/ prefixlen option
930		echo inet6 ${_arg%/[0-9]*} $_exargs && return
931	;;
932	*:*:*)			# already expanded w/o prefixlen option
933		echo inet6 $_arg $_exargs && return
934	;;
935	esac
936
937	for _cidr in $_arg; do
938		_ipaddr="${_cidr%%/*}"
939		_plen="${_cidr##*/}"
940
941		case $_action:$_ipaddr:$_cidr in
942		-alias:*:*)		unset _plen ;;
943		*:$_cidr:$_ipaddr)	unset _plen ;;
944		esac
945
946		if [ "${_ipaddr%:*.*.*.*}" = "$_ipaddr" ]; then
947			# Handle !v4mapped && !v4compat addresses.
948
949			# The default prefix length is 64.
950			case $_ipaddr:$_cidr in
951			$_cidr:$_ipaddr)	_plen="64" ;;
952			esac
953			_ipleft=${_ipaddr%-*}
954			_ipright=${_ipaddr#*-}
955			_iplow=${_ipleft##*:}
956			_iphigh=${_ipright%%:*}
957			_ipleft=${_ipleft%:*}
958			_ipright=${_ipright#*:}
959
960			if [ "$_iphigh" = "$_ipright" ]; then
961				unset _ipright
962			else
963				_ipright=:$_ipright
964			fi
965
966			if [ -n "$_iplow" -a -n "$_iphigh" ]; then
967				_iplow=$((0x$_iplow))
968				_iphigh=$((0x$_iphigh))
969				_ipcount=$_iplow
970				while [ $_ipcount -le $_iphigh ]; do
971					_r=`printf "%s:%04x%s%s" \
972					    $_ipleft $_ipcount $_ipright \
973					    ${_plen:+/}$_plen`
974					_retstr="$_retstr $_r"
975					if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]
976					then
977						warn "Range specification is too large $(printf '(%s:%x%s-%s:%x%s)' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_iphigh" "$_ipright"). $(printf '%s:%x%s-%s:%x%s' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_ipcount" "$_ipright") was processed.  Increase \$netif_ipexpand_max in rc.conf."
978						break
979					else
980						_ipcount=$(($_ipcount + 1))
981					fi
982				done
983			else
984				_retstr="${_ipaddr}${_plen:+/}${_plen}"
985			fi
986
987			for _c in $_retstr; do
988				ifalias_expand_addr_inet6 $_action $_c $_exargs
989			done
990		else
991			# v4mapped/v4compat should handle as an IPv4 alias
992			_ipv4part=${_ipaddr##*:}
993
994			# Adjust prefix length if any.  If not, set the
995			# default prefix length as 32.
996			case $_ipaddr:$_cidr in
997			$_cidr:$_ipaddr)	_plen=32 ;;
998			*)			_plen=$(($_plen - 96)) ;;
999			esac
1000
1001			_retstr=`ifalias_expand_addr_inet \
1002			    tmp ${_ipv4part}${_plen:+/}${_plen}`
1003			for _c in $_retstr; do
1004				ifalias_expand_addr_inet $_action $_c $_exargs
1005			done
1006		fi
1007	done
1008}
1009
1010# ifalias_af_common_handler if af action args
1011#	Helper function for ifalias_af_common().
1012#
1013ifalias_af_common_handler()
1014{
1015	local _ret _if _af _action _args _c _tmpargs
1016
1017	_ret=1
1018	_if=$1
1019	_af=$2
1020	_action=$3
1021	shift 3
1022	_args=$*
1023
1024	case $_args in
1025	${_af}\ *)	;;
1026	*)	return	;;
1027	esac
1028
1029	# link(ether) does not support address removal.
1030	case $_af:$_action in
1031	link:-alias|ether:-alias)	return ;;
1032	esac
1033
1034	_tmpargs=
1035	for _c in $_args; do
1036		case $_c in
1037		${_af})
1038			case $_tmpargs in
1039			${_af}\ *[0-9a-fA-F]-*)
1040				ifalias_af_common_handler $_if $_af $_action \
1041				`ifalias_expand_addr $_af $_action ${_tmpargs#${_af}\ }`
1042			;;
1043			${_af}\ *)
1044				${IFCONFIG_CMD} $_if $_tmpargs $_action && _ret=0
1045			;;
1046			esac
1047			_tmpargs=$_af
1048		;;
1049		*)
1050			_tmpargs="$_tmpargs $_c"
1051		;;
1052		esac
1053	done
1054	# Process the last component if any.
1055	if [ -n "$_tmpargs}" ]; then
1056		case $_tmpargs in
1057		${_af}\ *[0-9a-fA-F]-*)
1058			ifalias_af_common_handler $_if $_af $_action \
1059			`ifalias_expand_addr $_af $_action ${_tmpargs#${_af}\ }`
1060		;;
1061		${_af}\ *)
1062			${IFCONFIG_CMD} $_if $_tmpargs $_action && _ret=0
1063		;;
1064		esac
1065	fi
1066
1067	return $_ret
1068}
1069
1070# ifalias_af_common if af action
1071#	Helper function for ifalias().
1072#
1073ifalias_af_common()
1074{
1075	local _ret _if _af _action alias ifconfig_args _aliasn _c _tmpargs _iaf
1076	local _vif _punct=".-/+"
1077
1078	_ret=1
1079	_aliasn=
1080	_if=$1
1081	_af=$2
1082	_action=$3
1083
1084	# Normalize $_if before using it in a pattern to list_vars()
1085	ltr "$_if" "$_punct" "_" _vif
1086
1087	# ifconfig_IF_aliasN which starts with $_af
1088	for alias in `list_vars ifconfig_${_vif}_alias[0-9]\* |
1089		sort_lite -nk1.$((9+${#_vif}+7))`
1090	do
1091		eval ifconfig_args=\"\$$alias\"
1092		_iaf=
1093		case $ifconfig_args in
1094		inet\ *)	_iaf=inet ;;
1095		inet6\ *)	_iaf=inet6 ;;
1096		link\ *)	_iaf=link ;;
1097		ether\ *)	_iaf=ether ;;
1098		esac
1099
1100		case ${_af}:${_action}:${_iaf}:"${ifconfig_args}" in
1101		${_af}:*:${_af}:*)
1102			_aliasn="$_aliasn $ifconfig_args"
1103			;;
1104		${_af}:*:"":"")
1105			break
1106			;;
1107		inet:alias:"":*)
1108			_aliasn="$_aliasn inet $ifconfig_args"
1109			warn "\$${alias} needs leading" \
1110			    "\"inet\" keyword for an IPv4 address."
1111		esac
1112	done
1113
1114	# backward compatibility: ipv6_ifconfig_IF_aliasN.
1115	case $_af in
1116	inet6)
1117		for alias in `list_vars ipv6_ifconfig_${_vif}_alias[0-9]\* |
1118			sort_lite -nk1.$((14+${#_vif}+7))`
1119		do
1120			eval ifconfig_args=\"\$$alias\"
1121			case ${_action}:"${ifconfig_args}" in
1122			*:"")
1123				break
1124			;;
1125			alias:*)
1126				_aliasn="${_aliasn} inet6 ${ifconfig_args}"
1127				warn "\$${alias} is obsolete. " \
1128				    "Use ifconfig_${_vif}_aliasN instead."
1129			;;
1130			esac
1131		done
1132	esac
1133
1134	# backward compatibility: ipv4_addrs_IF.
1135	for _tmpargs in `get_if_var $_if ipv4_addrs_IF`; do
1136		_aliasn="$_aliasn inet $_tmpargs"
1137	done
1138
1139	# Handle ifconfig_IF_aliases, ifconfig_IF_aliasN, and the others.
1140	_tmpargs=
1141	for _c in `get_if_var $_if ifconfig_IF_aliases` $_aliasn; do
1142		case $_c in
1143		inet|inet6|link|ether)
1144			case $_tmpargs in
1145			${_af}\ *)
1146				eval ifalias_af_common_handler $_if $_af $_action $_tmpargs && _ret=0
1147			;;
1148			esac
1149			_tmpargs=$_c
1150		;;
1151		*)
1152			_tmpargs="$_tmpargs $_c"
1153		esac
1154	done
1155	# Process the last component
1156	case $_tmpargs in
1157	${_af}\ *)
1158		ifalias_af_common_handler $_if $_af $_action $_tmpargs && _ret=0
1159	;;
1160	esac
1161
1162	return $_ret
1163}
1164
1165# ipv6_prefix_hostid_addr_common if action
1166#	Add or remove IPv6 prefix + hostid addr on the interface $if
1167#
1168ipv6_prefix_hostid_addr_common()
1169{
1170	local _if _action prefix j
1171	_if=$1
1172	_action=$2
1173	prefix=`get_if_var ${_if} ipv6_prefix_IF`
1174
1175	if [ -n "${prefix}" ]; then
1176		for j in ${prefix}; do
1177			# The default prefixlen is 64.
1178			plen=${j#*/}
1179			case $j:$plen in
1180			$plen:$j)	plen=64 ;;
1181			*)		j=${j%/*} ;;
1182			esac
1183
1184			# Normalize the last part by removing ":"
1185			j=${j%::*}
1186			j=${j%:}
1187			${IFCONFIG_CMD} ${_if} inet6 $j:: \
1188				prefixlen $plen eui64 ${_action}
1189
1190			# if I am a router, add subnet router
1191			# anycast address (RFC 2373).
1192			if checkyesno ipv6_gateway_enable; then
1193				${IFCONFIG_CMD} ${_if} inet6 $j:: \
1194					prefixlen $plen ${_action} anycast
1195			fi
1196		done
1197	fi
1198}
1199
1200# ipv6_accept_rtadv_up if
1201#	Enable accepting Router Advertisement and send Router
1202#	Solicitation message
1203ipv6_accept_rtadv_up()
1204{
1205	if ipv6_autoconfif $1; then
1206		${IFCONFIG_CMD} $1 inet6 accept_rtadv up
1207		if ! checkyesno rtsold_enable; then
1208			rtsol ${rtsol_flags} $1
1209		fi
1210	fi
1211}
1212
1213# ipv6_accept_rtadv_down if
1214#	Disable accepting Router Advertisement
1215ipv6_accept_rtadv_down()
1216{
1217	if ipv6_autoconfif $1; then
1218		${IFCONFIG_CMD} $1 inet6 -accept_rtadv
1219	fi
1220}
1221
1222# ifscript_up if
1223#	Evaluate a startup script for the $if interface.
1224#	It returns 0 if a script was found and processed or
1225#	1 if no script was found.
1226#
1227ifscript_up()
1228{
1229	if [ -r /etc/start_if.$1 ]; then
1230		. /etc/start_if.$1
1231		return 0
1232	else
1233		return 1
1234	fi
1235}
1236
1237# ifscript_down if
1238#	Evaluate a shutdown script for the $if interface.
1239#	It returns 0 if a script was found and processed or
1240#	1 if no script was found.
1241#
1242ifscript_down()
1243{
1244	if [ -r /etc/stop_if.$1 ]; then
1245		. /etc/stop_if.$1
1246		return 0
1247	else
1248		return 1
1249	fi
1250}
1251
1252# wlan_up
1253#	Create IEEE802.11 interfaces.
1254#
1255wlan_up()
1256{
1257	local _list _iflist parent child_wlans child create_args debug_flags
1258	_list=
1259	_iflist=$*
1260
1261	# Parse wlans_$parent="$child ..."
1262	for parent in `set | sed -nE 's/wlans_([a-z]+[0-9]+)=.*/\1/p'`; do
1263		child_wlans=`get_if_var $parent wlans_IF`
1264		for child in ${child_wlans}; do
1265			create_args="wlandev $parent `get_if_var $child create_args_IF`"
1266			debug_flags="`get_if_var $child wlandebug_IF`"
1267			case $_iflist in
1268			""|$child|$child\ *|*\ $child\ *|*\ $child)	;;
1269			*)	continue ;;
1270			esac
1271			# Skip if ${child} already exists.
1272			if ${IFCONFIG_CMD} $child > /dev/null 2>&1; then
1273				continue
1274			fi
1275			if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
1276				${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1277				if [ $? -eq 0 ]; then
1278					_list="$_list $child"
1279				fi
1280				if [ -n "${debug_flags}" ]; then
1281					wlandebug -i $child ${debug_flags}
1282				fi
1283			else
1284				i=`${IFCONFIG_CMD} wlan create ${create_args}`
1285				# XXXGL: wlandebug should accept any name
1286				if [ -n "${debug_flags}" ]; then
1287					wlandebug -i $i ${debug_flags}
1288				fi
1289				${IFCONFIG_CMD} $i name $child && cfg=0
1290				if [ $? -eq 0 ]; then
1291					_list="$_list $child"
1292				fi
1293			fi
1294		done
1295	done
1296	if [ -n "${_list# }" ]; then
1297		echo "Created wlan(4) interfaces: ${_list# }."
1298	fi
1299	debug "Created wlan(4)s: ${_list# }"
1300}
1301
1302# wlan_down
1303#	Destroy IEEE802.11 interfaces.
1304#
1305wlan_down()
1306{
1307	local _list _iflist parent child_wlans child
1308	_list=
1309	_iflist=$*
1310
1311	# Parse wlans_$parent="$child ..."
1312	for parent in `set | sed -nE 's/wlans_([a-z]+[0-9]+)=.*/\1/p'`; do
1313		child_wlans=`get_if_var $parent wlans_IF`
1314		for child in ${child_wlans}; do
1315			case $_iflist in
1316			""|$child|$child\ *|*\ $child\ *|*\ $child)	;;
1317			*)	continue ;;
1318			esac
1319			# Skip if ${child} doesn't exists.
1320			if ! ${IFCONFIG_CMD} $child > /dev/null 2>&1; then
1321				continue
1322			fi
1323			${IFCONFIG_CMD} -n ${child} destroy
1324			if [ $? -eq 0 ]; then
1325				_list="$_list $child"
1326			fi
1327		done
1328	done
1329	if [ -n "${_list# }" ]; then
1330		echo "Destroyed wlan(4) interfaces: ${_list# }."
1331	fi
1332	debug "Destroyed wlan(4)s: ${_list# }"
1333}
1334
1335# clone_up
1336#	Create cloneable interfaces.
1337#
1338clone_up()
1339{
1340	local _list ifn ifopt _iflist _n tmpargs
1341	_list=
1342	_iflist=$*
1343
1344	# create_args_IF
1345	for ifn in ${cloned_interfaces}; do
1346		# Parse ifn:ifopt.
1347		OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
1348		case $_iflist in
1349		""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn)	;;
1350		*)	continue ;;
1351		esac
1352		case $ifn in
1353		epair[0-9]*)
1354			# epair(4) uses epair[0-9] for creation and
1355			# epair[0-9][ab] for configuration.
1356			#
1357			# Skip if ${ifn}a or ${ifn}b already exist.
1358			if ${IFCONFIG_CMD} ${ifn}a > /dev/null 2>&1; then
1359				continue
1360			elif ${IFCONFIG_CMD} ${ifn}b > /dev/null 2>&1; then
1361				continue
1362			fi
1363			${IFCONFIG_CMD} ${ifn} create \
1364			    `get_if_var ${ifn} create_args_IF`
1365			if [ $? -eq 0 ]; then
1366				_list="$_list ${ifn}a ${ifn}b"
1367			fi
1368		;;
1369		*)
1370			# Skip if ${ifn} already exists.
1371			if ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
1372				continue
1373			fi
1374			${IFCONFIG_CMD} ${ifn} create \
1375			    `get_if_var ${ifn} create_args_IF`
1376			if [ $? -eq 0 ]; then
1377				_list="$_list $ifn"
1378			fi
1379		esac
1380	done
1381	if [ -n "$gif_interfaces" ]; then
1382		warn "\$gif_interfaces is obsolete.  Use \$cloned_interfaces instead."
1383	fi
1384	for ifn in ${gif_interfaces}; do
1385		# Parse ifn:ifopt.
1386		OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
1387		case $_iflist in
1388		""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn)	;;
1389		*)	continue ;;
1390		esac
1391		# Skip if ifn already exists.
1392		if ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
1393			continue
1394		fi
1395		case $ifn in
1396		gif[0-9]*)
1397			${IFCONFIG_CMD} $ifn create
1398		;;
1399		*)
1400			_n=$(${IFCONFIG_CMD} gif create)
1401			${IFCONFIG_CMD} $_n name $ifn
1402		;;
1403		esac
1404		if [ $? -eq 0 ]; then
1405			_list="$_list $ifn"
1406		fi
1407		tmpargs=$(get_if_var $ifn gifconfig_IF)
1408		eval ifconfig_${ifn}=\"tunnel \$tmpargs\"
1409	done
1410	if [ -n "${_list# }" ]; then
1411		echo "Created clone interfaces: ${_list# }."
1412	fi
1413	debug "Cloned: ${_list# }"
1414}
1415
1416# clone_down
1417#	Destroy cloned interfaces. Destroyed interfaces are echoed to
1418#	standard output.
1419#
1420clone_down()
1421{
1422	local _list ifn _difn ifopt _iflist _sticky
1423	_list=
1424	_iflist=$*
1425
1426	: ${cloned_interfaces_sticky:=NO}
1427	if checkyesno cloned_interfaces_sticky; then
1428		_sticky=1
1429	else
1430		_sticky=0
1431	fi
1432	for ifn in ${cloned_interfaces} ${gif_interfaces}; do
1433		# Parse ifn:ifopt.
1434		OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
1435		case $ifopt:$_sticky in
1436		sticky:*)	continue ;;	# :sticky => not destroy
1437		nosticky:*)	;;		# :nosticky => destroy
1438		*:1)		continue ;;	# global sticky knob == 1
1439		esac
1440		case $_iflist in
1441		""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn)	;;
1442		*)	continue ;;
1443		esac
1444		case $ifn in
1445		epair[0-9]*)
1446			# Note: epair(4) uses epair[0-9] for removal and
1447			# epair[0-9][ab] for configuration.
1448			#
1449			# Skip if both of ${ifn}a and ${ifn}b do not exist.
1450			if ${IFCONFIG_CMD} ${ifn}a > /dev/null 2>&1; then
1451				_difn=${ifn}a
1452			elif ${IFCONFIG_CMD} ${ifn}b > /dev/null 2>&1; then
1453				_difn=${ifn}b
1454			else
1455				continue
1456			fi
1457			${IFCONFIG_CMD} -n $_difn destroy
1458			if [ $? -eq 0 ]; then
1459				_list="$_list ${ifn}a ${ifn}b"
1460			fi
1461		;;
1462		*)
1463			# Skip if ifn does not exist.
1464			if ! ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
1465				continue
1466			fi
1467			${IFCONFIG_CMD} -n ${ifn} destroy
1468			if [ $? -eq 0 ]; then
1469				_list="$_list $ifn"
1470			fi
1471		;;
1472		esac
1473	done
1474	if [ -n "${_list# }" ]; then
1475		echo "Destroyed clone interfaces: ${_list# }."
1476	fi
1477	debug "Destroyed clones: ${_list# }"
1478}
1479
1480# childif_create
1481#	Create and configure child interfaces.  Return 0 if child
1482#	interfaces are created.
1483#
1484#	XXXGL: the wlan code in this functions is superseded by wlan_up(),
1485#	and will go away soon.
1486#
1487childif_create()
1488{
1489	local cfg child child_vlans child_wlans create_args debug_flags ifn i
1490	cfg=1
1491	ifn=$1
1492
1493	# Create wireless interfaces
1494	child_wlans=`get_if_var $ifn wlans_IF`
1495
1496	for child in ${child_wlans}; do
1497		create_args="wlandev $ifn `get_if_var $child create_args_IF`"
1498		debug_flags="`get_if_var $child wlandebug_IF`"
1499
1500		if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
1501			${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1502			if [ -n "${debug_flags}" ]; then
1503				wlandebug -i $child ${debug_flags}
1504			fi
1505		else
1506			i=`${IFCONFIG_CMD} wlan create ${create_args}`
1507			if [ -n "${debug_flags}" ]; then
1508				wlandebug -i $i ${debug_flags}
1509			fi
1510			${IFCONFIG_CMD} $i name $child && cfg=0
1511		fi
1512		if autoif $child; then
1513			ifn_start $child
1514		fi
1515	done
1516
1517	# Create vlan interfaces
1518	child_vlans=`get_if_var $ifn vlans_IF`
1519
1520	if [ -n "${child_vlans}" ]; then
1521		load_kld if_vlan
1522	fi
1523
1524	for child in ${child_vlans}; do
1525		if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
1526			child="${ifn}.${child}"
1527			create_args=`get_if_var $child create_args_IF`
1528			${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1529		else
1530			create_args="vlandev $ifn `get_if_var $child create_args_IF`"
1531			if expr $child : 'vlan[0-9][0-9]*$' >/dev/null 2>&1; then
1532				${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1533			else
1534				i=`${IFCONFIG_CMD} vlan create ${create_args}`
1535				${IFCONFIG_CMD} $i name $child && cfg=0
1536			fi
1537		fi
1538		if autoif $child; then
1539			ifn_start $child
1540		fi
1541	done
1542
1543	return ${cfg}
1544}
1545
1546# childif_destroy
1547#	Destroy child interfaces.
1548#
1549childif_destroy()
1550{
1551	local cfg child child_vlans child_wlans ifn
1552	cfg=1
1553
1554	child_wlans=`get_if_var $ifn wlans_IF`
1555	for child in ${child_wlans}; do
1556		if ! ifexists $child; then
1557			continue
1558		fi
1559		${IFCONFIG_CMD} -n $child destroy && cfg=0
1560	done
1561
1562	child_vlans=`get_if_var $ifn vlans_IF`
1563	for child in ${child_vlans}; do
1564		if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
1565			child="${ifn}.${child}"
1566		fi
1567		if ! ifexists $child; then
1568			continue
1569		fi
1570		${IFCONFIG_CMD} -n $child destroy && cfg=0
1571	done
1572
1573	return ${cfg}
1574}
1575
1576# ng_mkpeer
1577#	Create netgraph nodes.
1578#
1579ng_mkpeer()
1580{
1581	ngctl -f - 2> /dev/null <<EOF
1582mkpeer $*
1583msg dummy nodeinfo
1584EOF
1585}
1586
1587# ng_create_one
1588#	Create netgraph nodes.
1589#
1590ng_create_one()
1591{
1592	local t
1593
1594	ng_mkpeer $* | while read line; do
1595		t=`expr "${line}" : '.* name="\([a-z]*[0-9]*\)" .*'`
1596		if [ -n "${t}" ]; then
1597			echo ${t}
1598			return
1599		fi
1600	done
1601}
1602
1603# ifnet_rename [ifname]
1604#	Rename interfaces if ifconfig_IF_name is defined.
1605#
1606ifnet_rename()
1607{
1608	local _if _ifname
1609
1610	# ifconfig_IF_name
1611	for _if in ${*:-$(${IFCONFIG_CMD} -l)}; do
1612		_ifname=`get_if_var $_if ifconfig_IF_name`
1613		if [ ! -z "$_ifname" ]; then
1614			${IFCONFIG_CMD} $_if name $_ifname
1615		fi
1616	done
1617
1618	return 0
1619}
1620
1621# list_net_interfaces type
1622#	List all network interfaces. The type of interface returned
1623#	can be controlled by the type argument. The type
1624#	argument can be any of the following:
1625#		nodhcp	- all interfaces, excluding DHCP configured interfaces
1626#		dhcp	- list only DHCP configured interfaces
1627#		noautoconf	- all interfaces, excluding IPv6 Stateless
1628#				  Address Autoconf configured interfaces
1629#		autoconf	- list only IPv6 Stateless Address Autoconf
1630#				  configured interfaces
1631#	If no argument is specified all network interfaces are output.
1632#	Note that the list will include cloned interfaces if applicable.
1633#	Cloned interfaces must already exist to have a chance to appear
1634#	in the list if ${network_interfaces} is set to `auto'.
1635#
1636list_net_interfaces()
1637{
1638	local type _tmplist _list _autolist _lo _if
1639	type=$1
1640
1641	# Get a list of ALL the interfaces and make lo0 first if it's there.
1642	#
1643	_tmplist=
1644	case ${network_interfaces} in
1645	[Aa][Uu][Tt][Oo])
1646		_autolist="`${IFCONFIG_CMD} -l`"
1647		_lo=
1648		for _if in ${_autolist} ; do
1649			if autoif $_if; then
1650				if [ "$_if" = "lo0" ]; then
1651					_lo="lo0 "
1652				else
1653					_tmplist="${_tmplist} ${_if}"
1654				fi
1655			fi
1656		done
1657		_tmplist="${_lo}${_tmplist# }"
1658	;;
1659	*)
1660		for _if in ${network_interfaces} ${cloned_interfaces}; do
1661			# epair(4) uses epair[0-9] for creation and
1662			# epair[0-9][ab] for configuration.
1663			case $_if in
1664			epair[0-9]*)
1665				_tmplist="$_tmplist ${_if}a ${_if}b"
1666			;;
1667			*)
1668				_tmplist="$_tmplist $_if"
1669			;;
1670			esac
1671		done
1672		#
1673		# lo0 is effectively mandatory, so help prevent foot-shooting
1674		#
1675		case "$_tmplist" in
1676		lo0|'lo0 '*|*' lo0'|*' lo0 '*)
1677			# This is fine, do nothing
1678			_tmplist="${_tmplist# }"
1679		;;
1680		*)
1681			_tmplist="lo0 ${_tmplist# }"
1682		;;
1683		esac
1684	;;
1685	esac
1686
1687	_list=
1688	case "$type" in
1689	nodhcp)
1690		for _if in ${_tmplist} ; do
1691			if ! dhcpif $_if && \
1692			   [ -n "`_ifconfig_getargs $_if`" ]; then
1693				_list="${_list# } ${_if}"
1694			fi
1695		done
1696	;;
1697	dhcp)
1698		for _if in ${_tmplist} ; do
1699			if dhcpif $_if; then
1700				_list="${_list# } ${_if}"
1701			fi
1702		done
1703	;;
1704	noautoconf)
1705		for _if in ${_tmplist} ; do
1706			if ! ipv6_autoconfif $_if && \
1707			   [ -n "`_ifconfig_getargs $_if ipv6`" ]; then
1708				_list="${_list# } ${_if}"
1709			fi
1710		done
1711	;;
1712	autoconf)
1713		for _if in ${_tmplist} ; do
1714			if ipv6_autoconfif $_if; then
1715				_list="${_list# } ${_if}"
1716			fi
1717		done
1718	;;
1719	*)
1720		_list=${_tmplist}
1721	;;
1722	esac
1723
1724	echo $_list
1725
1726	return 0
1727}
1728
1729# get_default_if -address_family
1730#	Get the interface of the default route for the given address family.
1731#	The -address_family argument must be suitable passing to route(8).
1732#
1733get_default_if()
1734{
1735	local routeget oldifs defif line
1736	defif=
1737	oldifs="$IFS"
1738	IFS="
1739"
1740	for line in `route -n get $1 default 2>/dev/null`; do
1741		case $line in
1742		*interface:*)
1743			defif=${line##*: }
1744			;;
1745		esac
1746	done
1747	IFS=${oldifs}
1748
1749	echo $defif
1750}
1751
1752# hexdigit arg
1753#	Echo decimal number $arg (single digit) in hexadecimal format.
1754hexdigit()
1755{
1756	printf '%x\n' "$1"
1757}
1758
1759# hexprint arg
1760#	Echo decimal number $arg (multiple digits) in hexadecimal format.
1761hexprint()
1762{
1763	printf '%x\n' "$1"
1764}
1765
1766is_wired_interface()
1767{
1768	local media
1769
1770	case `${IFCONFIG_CMD} $1 2>/dev/null` in
1771	*media:?Ethernet*) media=Ethernet ;;
1772	esac
1773
1774	test "$media" = "Ethernet"
1775}
1776
1777# network6_getladdr if [flag]
1778#	Echo link-local address from $if if any.
1779#	If flag is defined, tentative ones will be excluded.
1780network6_getladdr()
1781{
1782	local _if _flag proto addr rest
1783	_if=$1
1784	_flag=$2
1785
1786	${IFCONFIG_CMD} $_if 2>/dev/null | while read proto addr rest; do
1787		case "${proto}/${addr}/${_flag}/${rest}" in
1788		inet6/fe80::*//*)
1789			echo ${addr}
1790		;;
1791		inet6/fe80:://*tentative*)	# w/o flag
1792			sleep `${SYSCTL_N} net.inet6.ip6.dad_count`
1793			network6_getladdr $_if $_flags
1794		;;
1795		inet6/fe80::/*/*tentative*)	# w/ flag
1796			echo ${addr}
1797		;;
1798		*)
1799			continue
1800		;;
1801		esac
1802
1803		return
1804	done
1805}
1806