| /freebsd-10-stable/sys/dev/uart/ |
| D | uart_subr.c | 228 di->baudrate = 0; in uart_getenv()
237 di->baudrate = uart_parse_long(&spec); in uart_getenv()
292 if (di->baudrate >= 19200) { in uart_getenv()
293 if (di->baudrate % 19200) in uart_getenv()
294 di->baudrate = 0; in uart_getenv()
295 } else if (di->baudrate >= 1200) { in uart_getenv()
296 if (di->baudrate % 1200) in uart_getenv()
297 di->baudrate = 0; in uart_getenv()
298 } else if (di->baudrate > 0) { in uart_getenv()
299 if (di->baudrate % 75) in uart_getenv()
[all …]
|
| D | uart_dev_quicc.c | 58 quicc_divisor(int rclk, int baudrate) in quicc_divisor() argument
62 if (baudrate == 0) in quicc_divisor()
65 divisor = rclk / baudrate / 16; in quicc_divisor()
75 error = ((act_baud - baudrate) * 2000 / baudrate + 1) >> 1; in quicc_divisor()
85 quicc_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in quicc_param() argument
91 if (baudrate > 0) { in quicc_param()
92 divisor = quicc_divisor(bas->rclk, baudrate); in quicc_param()
125 quicc_setup(struct uart_bas *bas, int baudrate, int databits, int stopbits, in quicc_setup() argument
136 quicc_param(bas, baudrate, databits, stopbits, parity); in quicc_setup()
169 quicc_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in quicc_init() argument
[all …]
|
| D | uart_dev_z8530.c | 73 z8530_divisor(int rclk, int baudrate) in z8530_divisor() argument
77 if (baudrate == 0) in z8530_divisor()
80 divisor = (rclk + baudrate) / (baudrate << 1) - 2; in z8530_divisor()
86 error = ((act_baud - baudrate) * 2000 / baudrate + 1) >> 1; in z8530_divisor()
96 z8530_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in z8530_param() argument
127 if (baudrate > 0) { in z8530_param()
128 divisor = z8530_divisor(bas->rclk, baudrate); in z8530_param()
157 z8530_setup(struct uart_bas *bas, int baudrate, int databits, int stopbits, in z8530_setup() argument
184 z8530_param(bas, baudrate, databits, stopbits, parity, &tpc); in z8530_setup()
215 z8530_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in z8530_init() argument
[all …]
|
| D | uart_dev_ns8250.c | 112 ns8250_divisor(int rclk, int baudrate) in ns8250_divisor() argument
117 if (baudrate == 0) in ns8250_divisor()
120 divisor = (rclk / (baudrate << 3) + 1) >> 1; in ns8250_divisor()
126 error = ((actual_baud - baudrate) * 2000 / baudrate + 1) >> 1; in ns8250_divisor()
203 ns8250_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in ns8250_param() argument
223 if (baudrate > 0) { in ns8250_param()
224 divisor = ns8250_divisor(bas->rclk, baudrate); in ns8250_param()
286 ns8250_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in ns8250_init() argument
293 ns8250_param(bas, baudrate, databits, stopbits, parity); in ns8250_init()
603 int baudrate, divisor, error; in ns8250_bus_ioctl() local
[all …]
|
| D | uart_dev_sab82532.c | 69 sab82532_divisor(int rclk, int baudrate) in sab82532_divisor() argument
74 if (baudrate == 0) in sab82532_divisor()
77 divisor = (rclk / (baudrate << 3) + 1) >> 1; in sab82532_divisor()
90 error = ((act_baud - baudrate) * 2000 / baudrate + 1) >> 1; in sab82532_divisor()
122 sab82532_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in sab82532_param() argument
148 if (baudrate > 0) { in sab82532_param()
149 divisor = sab82532_divisor(bas->rclk, baudrate); in sab82532_param()
196 sab82532_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in sab82532_init() argument
253 sab82532_param(bas, baudrate, databits, stopbits, parity); in sab82532_init()
571 sab82532_bus_param(struct uart_softc *sc, int baudrate, int databits, in sab82532_bus_param() argument
[all …]
|
| D | uart_dev_lpc.c | 96 lpc_ns8250_divisor(int rclk, int baudrate, int *x, int *y) in lpc_ns8250_divisor() argument
99 switch (baudrate) { in lpc_ns8250_divisor()
205 lpc_ns8250_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in lpc_ns8250_param() argument
225 if (baudrate > 0) { in lpc_ns8250_param()
232 lpc_ns8250_divisor(bas->rclk, baudrate, &xdiv, &ydiv); in lpc_ns8250_param()
288 lpc_ns8250_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in lpc_ns8250_init() argument
307 lpc_ns8250_param(bas, baudrate, databits, stopbits, parity); in lpc_ns8250_init()
560 int baudrate, divisor, error; in lpc_ns8250_bus_ioctl() local
615 baudrate = (divisor > 0) ? bas->rclk / divisor / 16 : 0; in lpc_ns8250_bus_ioctl()
616 if (baudrate > 0) in lpc_ns8250_bus_ioctl()
[all …]
|
| D | uart_dev_pl011.c | 126 uart_pl011_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in uart_pl011_param() argument
167 if (bas->rclk != 0 && baudrate != 0) { in uart_pl011_param()
168 baud = bas->rclk * 4 / baudrate; in uart_pl011_param()
181 uart_pl011_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in uart_pl011_init() argument
188 uart_pl011_param(bas, baudrate, databits, stopbits, parity); in uart_pl011_init()
383 uart_pl011_bus_param(struct uart_softc *sc, int baudrate, int databits, in uart_pl011_bus_param() argument
388 uart_pl011_param(&sc->sc_bas, baudrate, databits, stopbits, parity); in uart_pl011_bus_param()
|
| D | uart_cpu_sparc64.c | 284 di->baudrate = 1200; in uart_cpu_getdev()
286 di->baudrate = 115200; in uart_cpu_getdev()
288 di->baudrate = 9600; in uart_cpu_getdev()
299 di->baudrate = baud; in uart_cpu_getdev()
|
| D | uart_cpu_powerpc.c | 193 if (OF_getprop(input, "current-speed", &di->baudrate, in uart_cpu_getdev()
194 sizeof(di->baudrate)) == -1) in uart_cpu_getdev()
195 di->baudrate = 0; in uart_cpu_getdev()
|
| D | uart_dev_msm.c | 72 msm_uart_param(struct uart_bas *bas, int baudrate, int databits, in msm_uart_param() argument
150 msm_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in msm_init() argument
160 msm_uart_param(bas, baudrate, databits, stopbits, parity); in msm_init()
432 msm_bus_param(struct uart_softc *sc, int baudrate, int databits, in msm_bus_param() argument
443 error = msm_uart_param(&sc->sc_bas, baudrate, databits, stopbits, in msm_bus_param()
|
| D | uart_dev_imx.c | 145 imx_uart_init(struct uart_bas *bas, int baudrate, int databits, in imx_uart_init() argument
194 if (baudrate > 0) { in imx_uart_init()
200 SETREG(bas, REG(UBMR), (baseclk / baudrate) - 1); in imx_uart_init()
332 imx_uart_init(bas, di->baudrate, di->databits, di->stopbits, in imx_uart_bus_attach()
489 imx_uart_bus_param(struct uart_softc *sc, int baudrate, int databits, in imx_uart_bus_param() argument
494 imx_uart_init(&sc->sc_bas, baudrate, databits, stopbits, parity); in imx_uart_bus_param()
|
| D | uart_cpu.h | 60 int baudrate; member
119 di->ops->init(&di->bas, di->baudrate, di->databits, di->stopbits, in uart_init()
|
| /freebsd-10-stable/sys/arm/xilinx/ |
| D | uart_dev_cdnc.c | 186 cdnc_uart_set_baud(struct uart_bas *bas, int baudrate) in cdnc_uart_set_baud() argument
198 baudgen = (bas->rclk + (baudrate * (bauddiv + 1)) / 2) / in cdnc_uart_set_baud()
199 (baudrate * (bauddiv + 1)); in cdnc_uart_set_baud()
204 err = baud_out > baudrate ? in cdnc_uart_set_baud()
205 baud_out - baudrate : baudrate - baud_out; in cdnc_uart_set_baud()
223 cdnc_uart_set_params(struct uart_bas *bas, int baudrate, int databits, in cdnc_uart_set_params() argument
265 if (baudrate > 0 && cdnc_uart_set_baud(bas, baudrate) < 0) in cdnc_uart_set_params()
309 cdnc_uart_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in cdnc_uart_init() argument
317 (void)cdnc_uart_set_params(bas, baudrate, databits, stopbits, parity); in cdnc_uart_init()
444 (void)cdnc_uart_set_params(bas, di->baudrate, di->databits, in cdnc_uart_bus_attach()
[all …]
|
| /freebsd-10-stable/sys/mips/cavium/ |
| D | uart_dev_oct16550.c | 134 oct16550_divisor (int rclk, int baudrate) in oct16550_divisor() argument
139 if (baudrate == 0) in oct16550_divisor()
142 divisor = (rclk / (baudrate << 3) + 1) >> 1; in oct16550_divisor()
148 error = ((actual_baud - baudrate) * 2000 / baudrate + 1) >> 1; in oct16550_divisor()
222 oct16550_param (struct uart_bas *bas, int baudrate, int databits, int stopbits, in oct16550_param() argument
242 if (baudrate > 0) { in oct16550_param()
243 divisor = oct16550_divisor(bas->rclk, baudrate); in oct16550_param()
298 oct16550_init (struct uart_bas *bas, int baudrate, int databits, int stopbits, in oct16550_init() argument
303 oct16550_param(bas, baudrate, databits, stopbits, parity); in oct16550_init()
528 int baudrate, divisor, error; in oct16550_bus_ioctl() local
[all …]
|
| /freebsd-10-stable/sys/ofed/include/rdma/ |
| D | ib_addr.h | 249 uintmax_t baudrate; in iboe_get_rate() local
252 baudrate = dev->if_baudrate; in iboe_get_rate()
254 baudrate *= 10; in iboe_get_rate()
255 if (baudrate >= IF_Gbps(40)) in iboe_get_rate()
257 else if (baudrate >= IF_Gbps(30)) in iboe_get_rate()
259 else if (baudrate >= IF_Gbps(20)) in iboe_get_rate()
261 else if (baudrate >= IF_Gbps(10)) in iboe_get_rate()
|
| /freebsd-10-stable/sys/mips/atheros/ |
| D | uart_dev_ar933x.c | 163 ar933x_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, in ar933x_param() argument
173 if (baudrate > 0) { in ar933x_param()
177 ar933x_uart_get_scale_step(bas, baudrate, &clock_scale, in ar933x_param()
223 ar933x_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in ar933x_init() argument
229 ar933x_param(bas, baudrate, databits, stopbits, parity); in ar933x_init()
449 int baudrate, divisor, error; in ar933x_bus_ioctl()
504 baudrate = (divisor > 0) ? bas->rclk / divisor / 16 : 0; in ar933x_bus_ioctl()
505 if (baudrate > 0) in ar933x_bus_ioctl()
506 *(int*)data = baudrate; in ar933x_bus_ioctl()
598 ar933x_bus_param(struct uart_softc *sc, int baudrate, int databits, in ar933x_bus_param() argument
[all …]
|
| /freebsd-10-stable/sys/mips/rt305x/ |
| D | uart_dev_rt305x.c | 91 rt305x_uart_init(struct uart_bas *bas, int baudrate, int databits, in rt305x_uart_init() argument
121 uart_setreg(bas, UART_CDDL_REG, 8000000/baudrate); in rt305x_uart_init()
273 rt305x_uart_init(bas, di->baudrate, di->databits, di->stopbits, in rt305x_uart_bus_attach()
345 int baudrate, divisor, error; in rt305x_uart_bus_ioctl() local
356 baudrate = bas->rclk / (divisor * 16); in rt305x_uart_bus_ioctl()
357 *(int*)data = baudrate; in rt305x_uart_bus_ioctl()
423 rt305x_uart_bus_param(struct uart_softc *sc, int baudrate, int databits, in rt305x_uart_bus_param() argument
427 rt305x_uart_init(&sc->sc_bas, baudrate, databits, stopbits, parity); in rt305x_uart_bus_param()
|
| /freebsd-10-stable/sys/arm/samsung/s3c2xx0/ |
| D | uart_dev_s3c2410.c | 88 s3c24x0_uart_param(struct uart_bas *bas, int baudrate, int databits, in s3c24x0_uart_param() argument
133 brd = sscomspeed(baudrate, bas->rclk); in s3c24x0_uart_param()
155 s3c2410_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in s3c2410_init() argument
167 s3c24x0_uart_param(bas, baudrate, databits, stopbits, parity); in s3c2410_init()
309 s3c2410_bus_param(struct uart_softc *sc, int baudrate, int databits, in s3c2410_bus_param() argument
319 error = s3c24x0_uart_param(&sc->sc_bas, baudrate, databits, stopbits, in s3c2410_bus_param()
|
| /freebsd-10-stable/sys/arm/samsung/exynos/ |
| D | exynos_uart.c | 80 exynos4210_uart_param(struct uart_bas *bas, int baudrate, int databits, in exynos4210_uart_param() argument
125 brd = sscomspeed(baudrate, bas->rclk); in exynos4210_uart_param()
148 exynos4210_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in exynos4210_init() argument
162 exynos4210_uart_param(bas, baudrate, databits, stopbits, parity); in exynos4210_init()
301 exynos4210_bus_param(struct uart_softc *sc, int baudrate, int databits, in exynos4210_bus_param() argument
312 error = exynos4210_uart_param(&sc->sc_bas, baudrate, databits, stopbits, in exynos4210_bus_param()
|
| /freebsd-10-stable/sys/contrib/octeon-sdk/ |
| D | cvmx-uart.c | 93 int cvmx_uart_setup2(int uart_index, int cpu_clock_hertz, int baudrate) in cvmx_uart_setup2() argument
108 … divisor = ((unsigned long)(cpu_clock_hertz + 8 * baudrate) / (unsigned long)(16 * baudrate)); in cvmx_uart_setup2()
|
| /freebsd-10-stable/contrib/gdb/gdb/ |
| D | ser-go32.c | 201 int baudrate; member
542 i = dos_baudconv (port->baudrate = 9600); in dos_open()
596 port->baudrate); in dos_close()
662 dos_setbaudrate (scb, state->baudrate); in dos_set_tty_state()
673 dos_setbaudrate (scb, state->baudrate); in dos_noflush_set_tty_state()
725 if (port->baudrate != rate) in dos_setbaudrate()
745 port->baudrate = rate; in dos_setbaudrate()
873 if (port->baudrate == 0) in dos_info()
879 printf_filtered ("Speed:\t%d baud\n", port->baudrate); in dos_info()
|
| D | remote-st.c | 267 static int baudrate = 9600; variable
278 n = sscanf (args, " %s %d %s", dev_name, &baudrate, junk); in st2000_open()
291 if (serial_setbaudrate (st2000_desc, baudrate)) in st2000_open()
487 dev_name, baudrate); in st2000_files_info()
|
| /freebsd-10-stable/sys/mips/adm5120/ |
| D | uart_dev_adm5120.c | 79 adm5120_uart_init(struct uart_bas *bas, int baudrate, int databits, in adm5120_uart_init() argument
282 int baudrate, divisor, error; in adm5120_uart_bus_ioctl() local
295 baudrate = bas->rclk / 2 / (divisor + 2); in adm5120_uart_bus_ioctl()
296 *(int*)data = baudrate; in adm5120_uart_bus_ioctl()
352 adm5120_uart_bus_param(struct uart_softc *sc, int baudrate, int databits, in adm5120_uart_bus_param() argument
|
| /freebsd-10-stable/sys/arm/at91/ |
| D | uart_dev_at91usart.c | 114 at91_usart_param(struct uart_bas *bas, int baudrate, int databits, in at91_usart_param() argument
205 WR4(bas, USART_BRGR, BAUD2DIVISOR(baudrate)); in at91_usart_param()
215 if (baudrate <= 19200) in at91_usart_param()
218 WR4(bas, USART_RTOR, baudrate / 2000); in at91_usart_param()
267 at91_usart_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, in at91_usart_init() argument
287 at91_usart_param(bas, baudrate, databits, stopbits, parity); in at91_usart_init()
627 at91_usart_bus_param(struct uart_softc *sc, int baudrate, int databits, in at91_usart_bus_param() argument
631 return (at91_usart_param(&sc->sc_bas, baudrate, databits, stopbits, in at91_usart_bus_param()
|
| /freebsd-10-stable/sys/dev/mlx5/mlx5_en/ |
| D | mlx5_en_main.c | 48 u64 baudrate; member
53 .baudrate = IF_Mbps(1000ULL),
57 .baudrate = IF_Mbps(1000ULL),
61 .baudrate = IF_Gbps(10ULL),
65 .baudrate = IF_Gbps(10ULL),
69 .baudrate = IF_Gbps(10ULL),
73 .baudrate = IF_Gbps(20ULL),
77 .baudrate = IF_Gbps(40ULL),
81 .baudrate = IF_Gbps(40ULL),
85 .baudrate = IF_Gbps(56ULL),
[all …]
|