1 /* $OpenBSD: lxtphyreg.h,v 1.1 1998/11/11 19:34:47 jason Exp $ */ 2 /* $NetBSD: lxtphyreg.h,v 1.1 1998/10/24 00:33:17 thorpej Exp $ */ 3 4 /*- 5 * Copyright (c) 1998 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 10 * NASA Ames Research Center. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the NetBSD 23 * Foundation, Inc. and its contributors. 24 * 4. Neither the name of The NetBSD Foundation nor the names of its 25 * contributors may be used to endorse or promote products derived 26 * from this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 29 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 30 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 31 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 32 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 33 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 34 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 35 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 36 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 37 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGE. 39 */ 40 41 #ifndef _DEV_MII_LXTPHYREG_H_ 42 #define _DEV_MII_LXTPHYREG_H_ 43 44 /* 45 * LXT970 registers. 46 */ 47 48 #define MII_LXTPHY_MIRROR 0x10 /* Mirror register */ 49 /* All bits user-defined */ 50 51 #define MII_LXTPHY_IER 0x11 /* Interrupt Enable Register */ 52 #define IER_MIIDRVLVL 0x0008 /* Rediced MII driver levels */ 53 #define IER_LNK_CRITERIA 0x0004 /* Enhanced Link Loss Criteria */ 54 #define IER_INTEN 0x0002 /* Interrupt Enable */ 55 #define IER_TINT 0x0001 /* Force Interrupt */ 56 57 #define MII_LXTPHY_ISR 0x12 /* Interrupt Status Register */ 58 #define ISR_MINT 0x8000 /* MII Interrupt Pending */ 59 #define ISR_XTALOK 0x4000 /* Clocks OK */ 60 61 #define MII_LXTPHY_CONFIG 0x13 /* Configuration Register */ 62 #define CONFIG_TXMIT_TEST 0x4000 /* 100base-T Transmit Test */ 63 #define CONFIG_REPEATER 0x2000 /* Repeater Mode */ 64 #define CONFIG_MDIO_INT 0x1000 /* Enable intr signalling on MDIO */ 65 #define CONFIG_TPLOOP 0x0800 /* Disable 10base-T Loopback */ 66 #define CONFIG_SQE 0x0400 /* Enable SQE */ 67 #define CONFIG_DISJABBER 0x0200 /* Disable Jabber */ 68 #define CONFIG_DISLINKTEST 0x0100 /* Disable Link Test */ 69 #define CONFIG_LEDC1 0x0080 /* LEDC configuration */ 70 #define CONFIG_LEDC0 0x0040 /* ... */ 71 /* 0 0 LEDC indicates collision */ 72 /* 0 1 LEDC is off */ 73 /* 1 0 LEDC indicates activity */ 74 /* 1 1 LEDC is on */ 75 #define CONFIG_ADVTXCLK 0x0020 /* Advance TX clock */ 76 #define CONFIG_5BSYMBOL 0x0010 /* 5-bit Symbol mode */ 77 #define CONFIG_SCRAMBLER 0x0008 /* Bypass scrambler */ 78 #define CONFIG_100BASEFX 0x0004 /* 100base-FX */ 79 #define CONFIG_TXDISCON 0x0001 /* Disconnect TP transmitter */ 80 81 #define MII_LXTPHY_CSR 0x14 /* Chip Status Register */ 82 #define CSR_LINK 0x2000 /* Link is up */ 83 #define CSR_DUPLEX 0x1000 /* Full-duplex */ 84 #define CSR_SPEED 0x0800 /* 100Mbps */ 85 #define CSR_ACOMP 0x0400 /* Autonegotiation complete */ 86 #define CSR_PAGERCVD 0x0200 /* Link page received */ 87 #define CSR_LOWVCC 0x0004 /* Low Voltage Fault */ 88 89 #endif /* _DEV_MII_LXTPHYREG_H_ */ 90