1 /****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACTYPES_H__ 45 #define __ACTYPES_H__ 46 47 /* acpisrc:StructDefs -- for acpisrc conversion */ 48 49 /* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header 51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of 52 * 12/2006. 53 */ 54 #ifndef ACPI_MACHINE_WIDTH 55 #error ACPI_MACHINE_WIDTH not defined 56 #endif 57 58 /* 59 * Data type ranges 60 * Note: These macros are designed to be compiler independent as well as 61 * working around problems that some 32-bit compilers have with 64-bit 62 * constants. 63 */ 64 #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 65 #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 66 #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 67 #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 68 #define ACPI_ASCII_MAX 0x7F 69 70 71 /* 72 * Architecture-specific ACPICA Subsystem Data Types 73 * 74 * The goal of these types is to provide source code portability across 75 * 16-bit, 32-bit, and 64-bit targets. 76 * 77 * 1) The following types are of fixed size for all targets (16/32/64): 78 * 79 * BOOLEAN Logical boolean 80 * 81 * UINT8 8-bit (1 byte) unsigned value 82 * UINT16 16-bit (2 byte) unsigned value 83 * UINT32 32-bit (4 byte) unsigned value 84 * UINT64 64-bit (8 byte) unsigned value 85 * 86 * INT16 16-bit (2 byte) signed value 87 * INT32 32-bit (4 byte) signed value 88 * INT64 64-bit (8 byte) signed value 89 * 90 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 91 * compiler-dependent header(s) and were introduced because there is no common 92 * 64-bit integer type across the various compilation models, as shown in 93 * the table below. 94 * 95 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 96 * char 8 8 8 8 8 8 97 * short 16 16 16 16 16 16 98 * _int32 32 99 * int 32 64 32 32 16 16 100 * long 64 64 32 32 32 32 101 * long long 64 64 102 * pointer 64 64 64 32 32 32 103 * 104 * Note: ILP64 and LP32 are currently not supported. 105 * 106 * 107 * 2) These types represent the native word size of the target mode of the 108 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 109 * usually used for memory allocation, efficient loop counters, and array 110 * indexes. The types are similar to the size_t type in the C library and are 111 * required because there is no C type that consistently represents the native 112 * data width. ACPI_SIZE is needed because there is no guarantee that a 113 * kernel-level C library is present. 114 * 115 * ACPI_SIZE 16/32/64-bit unsigned value 116 * ACPI_NATIVE_INT 16/32/64-bit signed value 117 */ 118 119 /******************************************************************************* 120 * 121 * Common types for all compilers, all targets 122 * 123 ******************************************************************************/ 124 125 #ifndef ACPI_USE_SYSTEM_INTTYPES 126 127 typedef unsigned char BOOLEAN; 128 typedef unsigned char UINT8; 129 typedef unsigned short UINT16; 130 typedef short INT16; 131 typedef COMPILER_DEPENDENT_UINT64 UINT64; 132 typedef COMPILER_DEPENDENT_INT64 INT64; 133 134 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 135 136 /* 137 * Value returned by AcpiOsGetThreadId. There is no standard "thread_id" 138 * across operating systems or even the various UNIX systems. Since ACPICA 139 * only needs the thread ID as a unique thread identifier, we use a UINT64 140 * as the only common data type - it will accommodate any type of pointer or 141 * any type of integer. It is up to the host-dependent OSL to cast the 142 * native thread ID type to a UINT64 (in AcpiOsGetThreadId). 143 */ 144 #define ACPI_THREAD_ID UINT64 145 146 147 /******************************************************************************* 148 * 149 * Types specific to 64-bit targets 150 * 151 ******************************************************************************/ 152 153 #if ACPI_MACHINE_WIDTH == 64 154 155 #ifndef ACPI_USE_SYSTEM_INTTYPES 156 157 typedef unsigned int UINT32; 158 typedef int INT32; 159 160 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 161 162 163 typedef INT64 ACPI_NATIVE_INT; 164 typedef UINT64 ACPI_SIZE; 165 typedef UINT64 ACPI_IO_ADDRESS; 166 typedef UINT64 ACPI_PHYSICAL_ADDRESS; 167 168 #define ACPI_MAX_PTR ACPI_UINT64_MAX 169 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 170 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 171 172 /* 173 * In the case of the Itanium Processor Family (IPF), the hardware does not 174 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag 175 * to indicate that special precautions must be taken to avoid alignment faults. 176 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) 177 * 178 * Note: EM64T and other X86-64 processors support misaligned transfers, 179 * so there is no need to define this flag. 180 */ 181 #if defined (__IA64__) || defined (__ia64__) 182 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 183 #endif 184 185 186 /******************************************************************************* 187 * 188 * Types specific to 32-bit targets 189 * 190 ******************************************************************************/ 191 192 #elif ACPI_MACHINE_WIDTH == 32 193 194 #ifndef ACPI_USE_SYSTEM_INTTYPES 195 196 typedef unsigned int UINT32; 197 typedef int INT32; 198 199 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 200 201 202 typedef INT32 ACPI_NATIVE_INT; 203 typedef UINT32 ACPI_SIZE; 204 205 #ifdef ACPI_32BIT_PHYSICAL_ADDRESS 206 207 /* 208 * OSPMs can define this to shrink the size of the structures for 32-bit 209 * none PAE environment. ASL compiler may always define this to generate 210 * 32-bit OSPM compliant tables. 211 */ 212 typedef UINT32 ACPI_IO_ADDRESS; 213 typedef UINT32 ACPI_PHYSICAL_ADDRESS; 214 215 #else /* ACPI_32BIT_PHYSICAL_ADDRESS */ 216 217 /* 218 * It is reported that, after some calculations, the physical addresses can 219 * wrap over the 32-bit boundary on 32-bit PAE environment. 220 * https://bugzilla.kernel.org/show_bug.cgi?id=87971 221 */ 222 typedef UINT64 ACPI_IO_ADDRESS; 223 typedef UINT64 ACPI_PHYSICAL_ADDRESS; 224 225 #endif /* ACPI_32BIT_PHYSICAL_ADDRESS */ 226 227 #define ACPI_MAX_PTR ACPI_UINT32_MAX 228 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 229 230 #else 231 232 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 233 234 #error unknown ACPI_MACHINE_WIDTH 235 #endif 236 237 238 /******************************************************************************* 239 * 240 * OS-dependent types 241 * 242 * If the defaults below are not appropriate for the host system, they can 243 * be defined in the OS-specific header, and this will take precedence. 244 * 245 ******************************************************************************/ 246 247 /* Flags for AcpiOsAcquireLock/AcpiOsReleaseLock */ 248 249 #ifndef ACPI_CPU_FLAGS 250 #define ACPI_CPU_FLAGS ACPI_SIZE 251 #endif 252 253 /* Object returned from AcpiOsCreateCache */ 254 255 #ifndef ACPI_CACHE_T 256 #ifdef ACPI_USE_LOCAL_CACHE 257 #define ACPI_CACHE_T ACPI_MEMORY_LIST 258 #else 259 #define ACPI_CACHE_T void * 260 #endif 261 #endif 262 263 /* 264 * Synchronization objects - Mutexes, Semaphores, and SpinLocks 265 */ 266 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 267 /* 268 * These macros are used if the host OS does not support a mutex object. 269 * Map the OSL Mutex interfaces to binary semaphores. 270 */ 271 #define ACPI_MUTEX ACPI_SEMAPHORE 272 #define AcpiOsCreateMutex(OutHandle) AcpiOsCreateSemaphore (1, 1, OutHandle) 273 #define AcpiOsDeleteMutex(Handle) (void) AcpiOsDeleteSemaphore (Handle) 274 #define AcpiOsAcquireMutex(Handle,Time) AcpiOsWaitSemaphore (Handle, 1, Time) 275 #define AcpiOsReleaseMutex(Handle) (void) AcpiOsSignalSemaphore (Handle, 1) 276 #endif 277 278 /* Configurable types for synchronization objects */ 279 280 #ifndef ACPI_SPINLOCK 281 #define ACPI_SPINLOCK void * 282 #endif 283 284 #ifndef ACPI_SEMAPHORE 285 #define ACPI_SEMAPHORE void * 286 #endif 287 288 #ifndef ACPI_MUTEX 289 #define ACPI_MUTEX void * 290 #endif 291 292 293 /******************************************************************************* 294 * 295 * Compiler-dependent types 296 * 297 * If the defaults below are not appropriate for the host compiler, they can 298 * be defined in the compiler-specific header, and this will take precedence. 299 * 300 ******************************************************************************/ 301 302 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 303 304 #ifndef ACPI_UINTPTR_T 305 #define ACPI_UINTPTR_T void * 306 #endif 307 308 /* 309 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 310 * some compilers can catch printf format string problems 311 */ 312 #ifndef ACPI_PRINTF_LIKE 313 #define ACPI_PRINTF_LIKE(c) 314 #endif 315 316 /* 317 * Some compilers complain about unused variables. Sometimes we don't want to 318 * use all the variables (for example, _AcpiModuleName). This allows us 319 * to tell the compiler in a per-variable manner that a variable 320 * is unused 321 */ 322 #ifndef ACPI_UNUSED_VAR 323 #define ACPI_UNUSED_VAR 324 #endif 325 326 /* 327 * All ACPICA external functions that are available to the rest of the kernel 328 * are tagged with thes macros which can be defined as appropriate for the host. 329 * 330 * Notes: 331 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination 332 * interfaces that may need special processing. 333 * ACPI_EXPORT_SYMBOL is used for all other public external functions. 334 */ 335 #ifndef ACPI_EXPORT_SYMBOL_INIT 336 #define ACPI_EXPORT_SYMBOL_INIT(Symbol) 337 #endif 338 339 #ifndef ACPI_EXPORT_SYMBOL 340 #define ACPI_EXPORT_SYMBOL(Symbol) 341 #endif 342 343 /* 344 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA 345 * utilities only. 346 */ 347 #ifndef ACPI_DEBUG_INITIALIZE 348 #define ACPI_DEBUG_INITIALIZE() 349 #endif 350 351 352 /******************************************************************************* 353 * 354 * Configuration 355 * 356 ******************************************************************************/ 357 358 #ifdef ACPI_NO_MEM_ALLOCATIONS 359 360 #define ACPI_ALLOCATE(a) NULL 361 #define ACPI_ALLOCATE_ZEROED(a) NULL 362 #define ACPI_FREE(a) 363 #define ACPI_MEM_TRACKING(a) 364 365 #else /* ACPI_NO_MEM_ALLOCATIONS */ 366 367 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 368 /* 369 * Memory allocation tracking (used by AcpiExec to detect memory leaks) 370 */ 371 #define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__ 372 #define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 373 #define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 374 #define ACPI_FREE(a) AcpiUtFreeAndTrack (a, ACPI_MEM_PARAMETERS) 375 #define ACPI_MEM_TRACKING(a) a 376 377 #else 378 /* 379 * Normal memory allocation directly via the OS services layer 380 */ 381 #define ACPI_ALLOCATE(a) AcpiOsAllocate ((ACPI_SIZE) (a)) 382 #define ACPI_ALLOCATE_ZEROED(a) AcpiOsAllocateZeroed ((ACPI_SIZE) (a)) 383 #define ACPI_FREE(a) AcpiOsFree (a) 384 #define ACPI_MEM_TRACKING(a) 385 386 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 387 388 #endif /* ACPI_NO_MEM_ALLOCATIONS */ 389 390 391 /****************************************************************************** 392 * 393 * ACPI Specification constants (Do not change unless the specification changes) 394 * 395 *****************************************************************************/ 396 397 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 398 399 #define ACPI_MAX_GPE_BLOCKS 2 400 401 /* Default ACPI register widths */ 402 403 #define ACPI_GPE_REGISTER_WIDTH 8 404 #define ACPI_PM1_REGISTER_WIDTH 16 405 #define ACPI_PM2_REGISTER_WIDTH 8 406 #define ACPI_PM_TIMER_WIDTH 32 407 #define ACPI_RESET_REGISTER_WIDTH 8 408 409 /* Names within the namespace are 4 bytes long */ 410 411 #define ACPI_NAME_SIZE 4 412 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 413 #define ACPI_PATH_SEPARATOR '.' 414 415 /* Sizes for ACPI table headers */ 416 417 #define ACPI_OEM_ID_SIZE 6 418 #define ACPI_OEM_TABLE_ID_SIZE 8 419 420 /* ACPI/PNP hardware IDs */ 421 422 #define PCI_ROOT_HID_STRING "PNP0A03" 423 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 424 425 /* PM Timer ticks per second (HZ) */ 426 427 #define ACPI_PM_TIMER_FREQUENCY 3579545 428 429 430 /******************************************************************************* 431 * 432 * Independent types 433 * 434 ******************************************************************************/ 435 436 /* Logical defines and NULL */ 437 438 #ifdef FALSE 439 #undef FALSE 440 #endif 441 #define FALSE (1 == 0) 442 443 #ifdef TRUE 444 #undef TRUE 445 #endif 446 #define TRUE (1 == 1) 447 448 #ifndef NULL 449 #define NULL (void *) 0 450 #endif 451 452 453 /* 454 * Miscellaneous types 455 */ 456 typedef UINT32 ACPI_STATUS; /* All ACPI Exceptions */ 457 typedef UINT32 ACPI_NAME; /* 4-byte ACPI name */ 458 typedef char * ACPI_STRING; /* Null terminated ASCII string */ 459 typedef void * ACPI_HANDLE; /* Actually a ptr to a NS Node */ 460 461 462 /* Time constants for timer calculations */ 463 464 #define ACPI_MSEC_PER_SEC 1000L 465 466 #define ACPI_USEC_PER_MSEC 1000L 467 #define ACPI_USEC_PER_SEC 1000000L 468 469 #define ACPI_100NSEC_PER_USEC 10L 470 #define ACPI_100NSEC_PER_MSEC 10000L 471 #define ACPI_100NSEC_PER_SEC 10000000L 472 473 #define ACPI_NSEC_PER_USEC 1000L 474 #define ACPI_NSEC_PER_MSEC 1000000L 475 #define ACPI_NSEC_PER_SEC 1000000000L 476 477 478 /* Owner IDs are used to track namespace nodes for selective deletion */ 479 480 typedef UINT8 ACPI_OWNER_ID; 481 #define ACPI_OWNER_ID_MAX 0xFF 482 483 484 #define ACPI_INTEGER_BIT_SIZE 64 485 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 486 #define ACPI_MAX64_DECIMAL_DIGITS 20 487 #define ACPI_MAX32_DECIMAL_DIGITS 10 488 #define ACPI_MAX16_DECIMAL_DIGITS 5 489 #define ACPI_MAX8_DECIMAL_DIGITS 3 490 491 /* 492 * Constants with special meanings 493 */ 494 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (ACPI_HANDLE, NULL, ACPI_MAX_PTR) 495 #define ACPI_WAIT_FOREVER 0xFFFF /* UINT16, as per ACPI spec */ 496 #define ACPI_DO_NOT_WAIT 0 497 498 /* 499 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits. 500 * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this 501 * pertains to the ACPI integer type only, not to other integers used in the 502 * implementation of the ACPICA subsystem. 503 * 504 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 505 * code base. It remains here for compatibility with device drivers that use 506 * the type. However, it will be removed in the future. 507 */ 508 typedef UINT64 ACPI_INTEGER; 509 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 510 511 512 /******************************************************************************* 513 * 514 * Commonly used macros 515 * 516 ******************************************************************************/ 517 518 /* Data manipulation */ 519 520 #define ACPI_LOBYTE(Integer) ((UINT8) (UINT16)(Integer)) 521 #define ACPI_HIBYTE(Integer) ((UINT8) (((UINT16)(Integer)) >> 8)) 522 #define ACPI_LOWORD(Integer) ((UINT16) (UINT32)(Integer)) 523 #define ACPI_HIWORD(Integer) ((UINT16)(((UINT32)(Integer)) >> 16)) 524 #define ACPI_LODWORD(Integer64) ((UINT32) (UINT64)(Integer64)) 525 #define ACPI_HIDWORD(Integer64) ((UINT32)(((UINT64)(Integer64)) >> 32)) 526 527 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 528 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 529 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 530 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 531 532 /* Size calculation */ 533 534 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 535 536 /* Pointer manipulation */ 537 538 #define ACPI_CAST_PTR(t, p) ((t *) (ACPI_UINTPTR_T) (p)) 539 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (ACPI_UINTPTR_T) (p)) 540 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (UINT8, (a)) + (ACPI_SIZE)(b))) 541 #define ACPI_PTR_DIFF(a, b) (ACPI_SIZE) (ACPI_CAST_PTR (UINT8, (a)) - ACPI_CAST_PTR (UINT8, (b))) 542 543 /* Pointer/Integer type conversions */ 544 545 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(ACPI_SIZE) i) 546 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) 547 #define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL) 548 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 549 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 550 551 /* Optimizations for 4-character (32-bit) ACPI_NAME manipulation */ 552 553 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 554 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (UINT32, (a)) == *ACPI_CAST_PTR (UINT32, (b))) 555 #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (UINT32, (dest)) = *ACPI_CAST_PTR (UINT32, (src))) 556 #else 557 #define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 558 #define ACPI_MOVE_NAME(dest,src) (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) 559 #endif 560 561 /* Support for the special RSDP signature (8 characters) */ 562 563 #define ACPI_VALIDATE_RSDP_SIG(a) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) 564 #define ACPI_MAKE_RSDP_SIG(dest) (ACPI_MEMCPY (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) 565 566 567 /******************************************************************************* 568 * 569 * Miscellaneous constants 570 * 571 ******************************************************************************/ 572 573 /* 574 * Initialization sequence 575 */ 576 #define ACPI_FULL_INITIALIZATION 0x00 577 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 578 #define ACPI_NO_HARDWARE_INIT 0x02 579 #define ACPI_NO_EVENT_INIT 0x04 580 #define ACPI_NO_HANDLER_INIT 0x08 581 #define ACPI_NO_ACPI_ENABLE 0x10 582 #define ACPI_NO_DEVICE_INIT 0x20 583 #define ACPI_NO_OBJECT_INIT 0x40 584 585 /* 586 * Initialization state 587 */ 588 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 589 #define ACPI_INITIALIZED_OK 0x02 590 591 /* 592 * Power state values 593 */ 594 #define ACPI_STATE_UNKNOWN (UINT8) 0xFF 595 596 #define ACPI_STATE_S0 (UINT8) 0 597 #define ACPI_STATE_S1 (UINT8) 1 598 #define ACPI_STATE_S2 (UINT8) 2 599 #define ACPI_STATE_S3 (UINT8) 3 600 #define ACPI_STATE_S4 (UINT8) 4 601 #define ACPI_STATE_S5 (UINT8) 5 602 #define ACPI_S_STATES_MAX ACPI_STATE_S5 603 #define ACPI_S_STATE_COUNT 6 604 605 #define ACPI_STATE_D0 (UINT8) 0 606 #define ACPI_STATE_D1 (UINT8) 1 607 #define ACPI_STATE_D2 (UINT8) 2 608 #define ACPI_STATE_D3 (UINT8) 3 609 #define ACPI_D_STATES_MAX ACPI_STATE_D3 610 #define ACPI_D_STATE_COUNT 4 611 612 #define ACPI_STATE_C0 (UINT8) 0 613 #define ACPI_STATE_C1 (UINT8) 1 614 #define ACPI_STATE_C2 (UINT8) 2 615 #define ACPI_STATE_C3 (UINT8) 3 616 #define ACPI_C_STATES_MAX ACPI_STATE_C3 617 #define ACPI_C_STATE_COUNT 4 618 619 /* 620 * Sleep type invalid value 621 */ 622 #define ACPI_SLEEP_TYPE_MAX 0x7 623 #define ACPI_SLEEP_TYPE_INVALID 0xFF 624 625 /* 626 * Standard notify values 627 */ 628 #define ACPI_NOTIFY_BUS_CHECK (UINT8) 0x00 629 #define ACPI_NOTIFY_DEVICE_CHECK (UINT8) 0x01 630 #define ACPI_NOTIFY_DEVICE_WAKE (UINT8) 0x02 631 #define ACPI_NOTIFY_EJECT_REQUEST (UINT8) 0x03 632 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (UINT8) 0x04 633 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (UINT8) 0x05 634 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (UINT8) 0x06 635 #define ACPI_NOTIFY_POWER_FAULT (UINT8) 0x07 636 #define ACPI_NOTIFY_CAPABILITIES_CHECK (UINT8) 0x08 637 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (UINT8) 0x09 638 #define ACPI_NOTIFY_RESERVED (UINT8) 0x0A 639 #define ACPI_NOTIFY_LOCALITY_UPDATE (UINT8) 0x0B 640 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (UINT8) 0x0C 641 #define ACPI_NOTIFY_AFFINITY_UPDATE (UINT8) 0x0D 642 643 #define ACPI_NOTIFY_MAX 0x0D 644 645 /* 646 * Types associated with ACPI names and objects. The first group of 647 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 648 * of the ACPI ObjectType() operator (See the ACPI Spec). Therefore, 649 * only add to the first group if the spec changes. 650 * 651 * NOTE: Types must be kept in sync with the global AcpiNsProperties 652 * and AcpiNsTypeNames arrays. 653 */ 654 typedef UINT32 ACPI_OBJECT_TYPE; 655 656 #define ACPI_TYPE_ANY 0x00 657 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 658 #define ACPI_TYPE_STRING 0x02 659 #define ACPI_TYPE_BUFFER 0x03 660 #define ACPI_TYPE_PACKAGE 0x04 /* ByteConst, multiple DataTerm/Constant/SuperName */ 661 #define ACPI_TYPE_FIELD_UNIT 0x05 662 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 663 #define ACPI_TYPE_EVENT 0x07 664 #define ACPI_TYPE_METHOD 0x08 /* Name, ByteConst, multiple Code */ 665 #define ACPI_TYPE_MUTEX 0x09 666 #define ACPI_TYPE_REGION 0x0A 667 #define ACPI_TYPE_POWER 0x0B /* Name,ByteConst,WordConst,multi Node */ 668 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,ByteConst,DWordConst,ByteConst,multi NmO */ 669 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 670 #define ACPI_TYPE_BUFFER_FIELD 0x0E 671 #define ACPI_TYPE_DDB_HANDLE 0x0F 672 #define ACPI_TYPE_DEBUG_OBJECT 0x10 673 674 #define ACPI_TYPE_EXTERNAL_MAX 0x10 675 676 /* 677 * These are object types that do not map directly to the ACPI 678 * ObjectType() operator. They are used for various internal purposes only. 679 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these 680 * internal types must move upwards. (There is code that depends on these 681 * values being contiguous with the external types above.) 682 */ 683 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 684 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 685 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 686 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, RefOf, Index */ 687 #define ACPI_TYPE_LOCAL_ALIAS 0x15 688 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 689 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 690 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 691 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 692 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 693 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple ObjectList Nodes */ 694 695 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 696 697 /* 698 * These are special object types that never appear in 699 * a Namespace node, only in an object of ACPI_OPERAND_OBJECT 700 */ 701 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 702 #define ACPI_TYPE_LOCAL_DATA 0x1D 703 704 #define ACPI_TYPE_LOCAL_MAX 0x1D 705 706 /* All types above here are invalid */ 707 708 #define ACPI_TYPE_INVALID 0x1E 709 #define ACPI_TYPE_NOT_FOUND 0xFF 710 711 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 712 713 714 /* 715 * All I/O 716 */ 717 #define ACPI_READ 0 718 #define ACPI_WRITE 1 719 #define ACPI_IO_MASK 1 720 721 /* 722 * Event Types: Fixed & General Purpose 723 */ 724 typedef UINT32 ACPI_EVENT_TYPE; 725 726 /* 727 * Fixed events 728 */ 729 #define ACPI_EVENT_PMTIMER 0 730 #define ACPI_EVENT_GLOBAL 1 731 #define ACPI_EVENT_POWER_BUTTON 2 732 #define ACPI_EVENT_SLEEP_BUTTON 3 733 #define ACPI_EVENT_RTC 4 734 #define ACPI_EVENT_MAX 4 735 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 736 737 /* 738 * Event Status - Per event 739 * ------------- 740 * The encoding of ACPI_EVENT_STATUS is illustrated below. 741 * Note that a set bit (1) indicates the property is TRUE 742 * (e.g. if bit 0 is set then the event is enabled). 743 * +-------------+-+-+-+-+-+ 744 * | Bits 31:5 |4|3|2|1|0| 745 * +-------------+-+-+-+-+-+ 746 * | | | | | | 747 * | | | | | +- Enabled? 748 * | | | | +--- Enabled for wake? 749 * | | | +----- Status bit set? 750 * | | +------- Enable bit set? 751 * | +--------- Has a handler? 752 * +--------------- <Reserved> 753 */ 754 typedef UINT32 ACPI_EVENT_STATUS; 755 756 #define ACPI_EVENT_FLAG_DISABLED (ACPI_EVENT_STATUS) 0x00 757 #define ACPI_EVENT_FLAG_ENABLED (ACPI_EVENT_STATUS) 0x01 758 #define ACPI_EVENT_FLAG_WAKE_ENABLED (ACPI_EVENT_STATUS) 0x02 759 #define ACPI_EVENT_FLAG_STATUS_SET (ACPI_EVENT_STATUS) 0x04 760 #define ACPI_EVENT_FLAG_ENABLE_SET (ACPI_EVENT_STATUS) 0x08 761 #define ACPI_EVENT_FLAG_HAS_HANDLER (ACPI_EVENT_STATUS) 0x10 762 #define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET 763 764 /* Actions for AcpiSetGpe, AcpiGpeWakeup, AcpiHwLowSetGpe */ 765 766 #define ACPI_GPE_ENABLE 0 767 #define ACPI_GPE_DISABLE 1 768 #define ACPI_GPE_CONDITIONAL_ENABLE 2 769 #define ACPI_GPE_SAVE_MASK 4 770 771 #define ACPI_GPE_ENABLE_SAVE (ACPI_GPE_ENABLE | ACPI_GPE_SAVE_MASK) 772 #define ACPI_GPE_DISABLE_SAVE (ACPI_GPE_DISABLE | ACPI_GPE_SAVE_MASK) 773 774 /* 775 * GPE info flags - Per GPE 776 * +-------+-+-+---+ 777 * | 7:5 |4|3|2:0| 778 * +-------+-+-+---+ 779 * | | | | 780 * | | | +-- Type of dispatch:to method, handler, notify, or none 781 * | | +----- Interrupt type: edge or level triggered 782 * | +------- Is a Wake GPE 783 * +------------ <Reserved> 784 */ 785 #define ACPI_GPE_DISPATCH_NONE (UINT8) 0x00 786 #define ACPI_GPE_DISPATCH_METHOD (UINT8) 0x01 787 #define ACPI_GPE_DISPATCH_HANDLER (UINT8) 0x02 788 #define ACPI_GPE_DISPATCH_NOTIFY (UINT8) 0x03 789 #define ACPI_GPE_DISPATCH_RAW_HANDLER (UINT8) 0x04 790 #define ACPI_GPE_DISPATCH_MASK (UINT8) 0x07 791 #define ACPI_GPE_DISPATCH_TYPE(flags) ((UINT8) ((flags) & ACPI_GPE_DISPATCH_MASK)) 792 793 #define ACPI_GPE_LEVEL_TRIGGERED (UINT8) 0x08 794 #define ACPI_GPE_EDGE_TRIGGERED (UINT8) 0x00 795 #define ACPI_GPE_XRUPT_TYPE_MASK (UINT8) 0x08 796 797 #define ACPI_GPE_CAN_WAKE (UINT8) 0x10 798 799 /* 800 * Flags for GPE and Lock interfaces 801 */ 802 #define ACPI_NOT_ISR 0x1 803 #define ACPI_ISR 0x0 804 805 806 /* Notify types */ 807 808 #define ACPI_SYSTEM_NOTIFY 0x1 809 #define ACPI_DEVICE_NOTIFY 0x2 810 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 811 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 812 #define ACPI_NUM_NOTIFY_TYPES 2 813 814 #define ACPI_MAX_SYS_NOTIFY 0x7F 815 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 816 817 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 818 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 819 820 821 /* Address Space (Operation Region) Types */ 822 823 typedef UINT8 ACPI_ADR_SPACE_TYPE; 824 825 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (ACPI_ADR_SPACE_TYPE) 0 826 #define ACPI_ADR_SPACE_SYSTEM_IO (ACPI_ADR_SPACE_TYPE) 1 827 #define ACPI_ADR_SPACE_PCI_CONFIG (ACPI_ADR_SPACE_TYPE) 2 828 #define ACPI_ADR_SPACE_EC (ACPI_ADR_SPACE_TYPE) 3 829 #define ACPI_ADR_SPACE_SMBUS (ACPI_ADR_SPACE_TYPE) 4 830 #define ACPI_ADR_SPACE_CMOS (ACPI_ADR_SPACE_TYPE) 5 831 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (ACPI_ADR_SPACE_TYPE) 6 832 #define ACPI_ADR_SPACE_IPMI (ACPI_ADR_SPACE_TYPE) 7 833 #define ACPI_ADR_SPACE_GPIO (ACPI_ADR_SPACE_TYPE) 8 834 #define ACPI_ADR_SPACE_GSBUS (ACPI_ADR_SPACE_TYPE) 9 835 #define ACPI_ADR_SPACE_PLATFORM_COMM (ACPI_ADR_SPACE_TYPE) 10 836 837 #define ACPI_NUM_PREDEFINED_REGIONS 11 838 839 /* 840 * Special Address Spaces 841 * 842 * Note: A Data Table region is a special type of operation region 843 * that has its own AML opcode. However, internally, the AML 844 * interpreter simply creates an operation region with an an address 845 * space type of ACPI_ADR_SPACE_DATA_TABLE. 846 */ 847 #define ACPI_ADR_SPACE_DATA_TABLE (ACPI_ADR_SPACE_TYPE) 0x7E /* Internal to ACPICA only */ 848 #define ACPI_ADR_SPACE_FIXED_HARDWARE (ACPI_ADR_SPACE_TYPE) 0x7F 849 850 /* Values for _REG connection code */ 851 852 #define ACPI_REG_DISCONNECT 0 853 #define ACPI_REG_CONNECT 1 854 855 /* 856 * BitRegister IDs 857 * 858 * These values are intended to be used by the hardware interfaces 859 * and are mapped to individual bitfields defined within the ACPI 860 * registers. See the AcpiGbl_BitRegisterInfo global table in utglobal.c 861 * for this mapping. 862 */ 863 864 /* PM1 Status register */ 865 866 #define ACPI_BITREG_TIMER_STATUS 0x00 867 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 868 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 869 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 870 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 871 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 872 #define ACPI_BITREG_WAKE_STATUS 0x06 873 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 874 875 /* PM1 Enable register */ 876 877 #define ACPI_BITREG_TIMER_ENABLE 0x08 878 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 879 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 880 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 881 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 882 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 883 884 /* PM1 Control register */ 885 886 #define ACPI_BITREG_SCI_ENABLE 0x0E 887 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 888 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 889 #define ACPI_BITREG_SLEEP_TYPE 0x11 890 #define ACPI_BITREG_SLEEP_ENABLE 0x12 891 892 /* PM2 Control register */ 893 894 #define ACPI_BITREG_ARB_DISABLE 0x13 895 896 #define ACPI_BITREG_MAX 0x13 897 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 898 899 900 /* Status register values. A 1 clears a status bit. 0 = no effect */ 901 902 #define ACPI_CLEAR_STATUS 1 903 904 /* Enable and Control register values */ 905 906 #define ACPI_ENABLE_EVENT 1 907 #define ACPI_DISABLE_EVENT 0 908 909 910 /* Sleep function dispatch */ 911 912 typedef ACPI_STATUS (*ACPI_SLEEP_FUNCTION) ( 913 UINT8 SleepState); 914 915 typedef struct acpi_sleep_functions 916 { 917 ACPI_SLEEP_FUNCTION LegacyFunction; 918 ACPI_SLEEP_FUNCTION ExtendedFunction; 919 920 } ACPI_SLEEP_FUNCTIONS; 921 922 923 /* 924 * External ACPI object definition 925 */ 926 927 /* 928 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element 929 * or an unresolved named reference. 930 */ 931 typedef union acpi_object 932 { 933 ACPI_OBJECT_TYPE Type; /* See definition of AcpiNsType for values */ 934 struct 935 { 936 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_INTEGER */ 937 UINT64 Value; /* The actual number */ 938 } Integer; 939 940 struct 941 { 942 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_STRING */ 943 UINT32 Length; /* # of bytes in string, excluding trailing null */ 944 char *Pointer; /* points to the string value */ 945 } String; 946 947 struct 948 { 949 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_BUFFER */ 950 UINT32 Length; /* # of bytes in buffer */ 951 UINT8 *Pointer; /* points to the buffer */ 952 } Buffer; 953 954 struct 955 { 956 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PACKAGE */ 957 UINT32 Count; /* # of elements in package */ 958 union acpi_object *Elements; /* Pointer to an array of ACPI_OBJECTs */ 959 } Package; 960 961 struct 962 { 963 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_LOCAL_REFERENCE */ 964 ACPI_OBJECT_TYPE ActualType; /* Type associated with the Handle */ 965 ACPI_HANDLE Handle; /* object reference */ 966 } Reference; 967 968 struct 969 { 970 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PROCESSOR */ 971 UINT32 ProcId; 972 ACPI_IO_ADDRESS PblkAddress; 973 UINT32 PblkLength; 974 } Processor; 975 976 struct 977 { 978 ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_POWER */ 979 UINT32 SystemLevel; 980 UINT32 ResourceOrder; 981 } PowerResource; 982 983 } ACPI_OBJECT; 984 985 986 /* 987 * List of objects, used as a parameter list for control method evaluation 988 */ 989 typedef struct acpi_object_list 990 { 991 UINT32 Count; 992 ACPI_OBJECT *Pointer; 993 994 } ACPI_OBJECT_LIST; 995 996 997 /* 998 * Miscellaneous common Data Structures used by the interfaces 999 */ 1000 #define ACPI_NO_BUFFER 0 1001 1002 #ifdef ACPI_NO_MEM_ALLOCATIONS 1003 1004 #define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (0) 1005 #define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (0) 1006 1007 #else /* ACPI_NO_MEM_ALLOCATIONS */ 1008 1009 #define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (-1) /* Let ACPICA allocate buffer */ 1010 #define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (-2) /* For internal use only (enables tracking) */ 1011 1012 #endif /* ACPI_NO_MEM_ALLOCATIONS */ 1013 1014 typedef struct acpi_buffer 1015 { 1016 ACPI_SIZE Length; /* Length in bytes of the buffer */ 1017 void *Pointer; /* pointer to buffer */ 1018 1019 } ACPI_BUFFER; 1020 1021 1022 /* 1023 * NameType for AcpiGetName 1024 */ 1025 #define ACPI_FULL_PATHNAME 0 1026 #define ACPI_SINGLE_NAME 1 1027 #define ACPI_NAME_TYPE_MAX 1 1028 1029 1030 /* 1031 * Predefined Namespace items 1032 */ 1033 typedef struct acpi_predefined_names 1034 { 1035 char *Name; 1036 UINT8 Type; 1037 char *Val; 1038 1039 } ACPI_PREDEFINED_NAMES; 1040 1041 1042 /* 1043 * Structure and flags for AcpiGetSystemInfo 1044 */ 1045 #define ACPI_SYS_MODE_UNKNOWN 0x0000 1046 #define ACPI_SYS_MODE_ACPI 0x0001 1047 #define ACPI_SYS_MODE_LEGACY 0x0002 1048 #define ACPI_SYS_MODES_MASK 0x0003 1049 1050 1051 /* 1052 * System info returned by AcpiGetSystemInfo() 1053 */ 1054 typedef struct acpi_system_info 1055 { 1056 UINT32 AcpiCaVersion; 1057 UINT32 Flags; 1058 UINT32 TimerResolution; 1059 UINT32 Reserved1; 1060 UINT32 Reserved2; 1061 UINT32 DebugLevel; 1062 UINT32 DebugLayer; 1063 1064 } ACPI_SYSTEM_INFO; 1065 1066 1067 /* 1068 * System statistics returned by AcpiGetStatistics() 1069 */ 1070 typedef struct acpi_statistics 1071 { 1072 UINT32 SciCount; 1073 UINT32 GpeCount; 1074 UINT32 FixedEventCount[ACPI_NUM_FIXED_EVENTS]; 1075 UINT32 MethodCount; 1076 1077 } ACPI_STATISTICS; 1078 1079 1080 /* Table Event Types */ 1081 1082 #define ACPI_TABLE_EVENT_LOAD 0x0 1083 #define ACPI_TABLE_EVENT_UNLOAD 0x1 1084 #define ACPI_NUM_TABLE_EVENTS 2 1085 1086 1087 /* 1088 * Types specific to the OS service interfaces 1089 */ 1090 typedef UINT32 1091 (ACPI_SYSTEM_XFACE *ACPI_OSD_HANDLER) ( 1092 void *Context); 1093 1094 typedef void 1095 (ACPI_SYSTEM_XFACE *ACPI_OSD_EXEC_CALLBACK) ( 1096 void *Context); 1097 1098 /* 1099 * Various handlers and callback procedures 1100 */ 1101 typedef 1102 UINT32 (*ACPI_SCI_HANDLER) ( 1103 void *Context); 1104 1105 typedef 1106 void (*ACPI_GBL_EVENT_HANDLER) ( 1107 UINT32 EventType, 1108 ACPI_HANDLE Device, 1109 UINT32 EventNumber, 1110 void *Context); 1111 1112 #define ACPI_EVENT_TYPE_GPE 0 1113 #define ACPI_EVENT_TYPE_FIXED 1 1114 1115 typedef 1116 UINT32 (*ACPI_EVENT_HANDLER) ( 1117 void *Context); 1118 1119 typedef 1120 UINT32 (*ACPI_GPE_HANDLER) ( 1121 ACPI_HANDLE GpeDevice, 1122 UINT32 GpeNumber, 1123 void *Context); 1124 1125 typedef 1126 void (*ACPI_NOTIFY_HANDLER) ( 1127 ACPI_HANDLE Device, 1128 UINT32 Value, 1129 void *Context); 1130 1131 typedef 1132 void (*ACPI_OBJECT_HANDLER) ( 1133 ACPI_HANDLE Object, 1134 void *Data); 1135 1136 typedef 1137 ACPI_STATUS (*ACPI_INIT_HANDLER) ( 1138 ACPI_HANDLE Object, 1139 UINT32 Function); 1140 1141 #define ACPI_INIT_DEVICE_INI 1 1142 1143 typedef 1144 ACPI_STATUS (*ACPI_EXCEPTION_HANDLER) ( 1145 ACPI_STATUS AmlStatus, 1146 ACPI_NAME Name, 1147 UINT16 Opcode, 1148 UINT32 AmlOffset, 1149 void *Context); 1150 1151 /* Table Event handler (Load, LoadTable, etc.) and types */ 1152 1153 typedef 1154 ACPI_STATUS (*ACPI_TABLE_HANDLER) ( 1155 UINT32 Event, 1156 void *Table, 1157 void *Context); 1158 1159 #define ACPI_TABLE_LOAD 0x0 1160 #define ACPI_TABLE_UNLOAD 0x1 1161 #define ACPI_NUM_TABLE_EVENTS 2 1162 1163 1164 /* Address Spaces (For Operation Regions) */ 1165 1166 typedef 1167 ACPI_STATUS (*ACPI_ADR_SPACE_HANDLER) ( 1168 UINT32 Function, 1169 ACPI_PHYSICAL_ADDRESS Address, 1170 UINT32 BitWidth, 1171 UINT64 *Value, 1172 void *HandlerContext, 1173 void *RegionContext); 1174 1175 #define ACPI_DEFAULT_HANDLER NULL 1176 1177 /* Special Context data for GenericSerialBus/GeneralPurposeIo (ACPI 5.0) */ 1178 1179 typedef struct acpi_connection_info 1180 { 1181 UINT8 *Connection; 1182 UINT16 Length; 1183 UINT8 AccessLength; 1184 1185 } ACPI_CONNECTION_INFO; 1186 1187 1188 typedef 1189 ACPI_STATUS (*ACPI_ADR_SPACE_SETUP) ( 1190 ACPI_HANDLE RegionHandle, 1191 UINT32 Function, 1192 void *HandlerContext, 1193 void **RegionContext); 1194 1195 #define ACPI_REGION_ACTIVATE 0 1196 #define ACPI_REGION_DEACTIVATE 1 1197 1198 typedef 1199 ACPI_STATUS (*ACPI_WALK_CALLBACK) ( 1200 ACPI_HANDLE Object, 1201 UINT32 NestingLevel, 1202 void *Context, 1203 void **ReturnValue); 1204 1205 typedef 1206 UINT32 (*ACPI_INTERFACE_HANDLER) ( 1207 ACPI_STRING InterfaceName, 1208 UINT32 Supported); 1209 1210 1211 /* Interrupt handler return values */ 1212 1213 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 1214 #define ACPI_INTERRUPT_HANDLED 0x01 1215 1216 /* GPE handler return values */ 1217 1218 #define ACPI_REENABLE_GPE 0x80 1219 1220 1221 /* Length of 32-bit EISAID values when converted back to a string */ 1222 1223 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1224 1225 /* Length of UUID (string) values */ 1226 1227 #define ACPI_UUID_LENGTH 16 1228 1229 1230 /* Structures used for device/processor HID, UID, CID, and SUB */ 1231 1232 typedef struct acpi_pnp_device_id 1233 { 1234 UINT32 Length; /* Length of string + null */ 1235 char *String; 1236 1237 } ACPI_PNP_DEVICE_ID; 1238 1239 typedef struct acpi_pnp_device_id_list 1240 { 1241 UINT32 Count; /* Number of IDs in Ids array */ 1242 UINT32 ListSize; /* Size of list, including ID strings */ 1243 ACPI_PNP_DEVICE_ID Ids[1]; /* ID array */ 1244 1245 } ACPI_PNP_DEVICE_ID_LIST; 1246 1247 /* 1248 * Structure returned from AcpiGetObjectInfo. 1249 * Optimized for both 32- and 64-bit builds 1250 */ 1251 typedef struct acpi_device_info 1252 { 1253 UINT32 InfoSize; /* Size of info, including ID strings */ 1254 UINT32 Name; /* ACPI object Name */ 1255 ACPI_OBJECT_TYPE Type; /* ACPI object Type */ 1256 UINT8 ParamCount; /* If a method, required parameter count */ 1257 UINT8 Valid; /* Indicates which optional fields are valid */ 1258 UINT8 Flags; /* Miscellaneous info */ 1259 UINT8 HighestDstates[4]; /* _SxD values: 0xFF indicates not valid */ 1260 UINT8 LowestDstates[5]; /* _SxW values: 0xFF indicates not valid */ 1261 UINT32 CurrentStatus; /* _STA value */ 1262 UINT64 Address; /* _ADR value */ 1263 ACPI_PNP_DEVICE_ID HardwareId; /* _HID value */ 1264 ACPI_PNP_DEVICE_ID UniqueId; /* _UID value */ 1265 ACPI_PNP_DEVICE_ID SubsystemId; /* _SUB value */ 1266 ACPI_PNP_DEVICE_ID_LIST CompatibleIdList; /* _CID list <must be last> */ 1267 1268 } ACPI_DEVICE_INFO; 1269 1270 /* Values for Flags field above (AcpiGetObjectInfo) */ 1271 1272 #define ACPI_PCI_ROOT_BRIDGE 0x01 1273 1274 /* Flags for Valid field above (AcpiGetObjectInfo) */ 1275 1276 #define ACPI_VALID_STA 0x01 1277 #define ACPI_VALID_ADR 0x02 1278 #define ACPI_VALID_HID 0x04 1279 #define ACPI_VALID_UID 0x08 1280 #define ACPI_VALID_SUB 0x10 1281 #define ACPI_VALID_CID 0x20 1282 #define ACPI_VALID_SXDS 0x40 1283 #define ACPI_VALID_SXWS 0x80 1284 1285 /* Flags for _STA return value (CurrentStatus above) */ 1286 1287 #define ACPI_STA_DEVICE_PRESENT 0x01 1288 #define ACPI_STA_DEVICE_ENABLED 0x02 1289 #define ACPI_STA_DEVICE_UI 0x04 1290 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1291 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1292 #define ACPI_STA_BATTERY_PRESENT 0x10 1293 1294 1295 /* Context structs for address space handlers */ 1296 1297 typedef struct acpi_pci_id 1298 { 1299 UINT16 Segment; 1300 UINT16 Bus; 1301 UINT16 Device; 1302 UINT16 Function; 1303 1304 } ACPI_PCI_ID; 1305 1306 typedef struct acpi_mem_space_context 1307 { 1308 UINT32 Length; 1309 ACPI_PHYSICAL_ADDRESS Address; 1310 ACPI_PHYSICAL_ADDRESS MappedPhysicalAddress; 1311 UINT8 *MappedLogicalAddress; 1312 ACPI_SIZE MappedLength; 1313 1314 } ACPI_MEM_SPACE_CONTEXT; 1315 1316 1317 /* 1318 * ACPI_MEMORY_LIST is used only if the ACPICA local cache is enabled 1319 */ 1320 typedef struct acpi_memory_list 1321 { 1322 char *ListName; 1323 void *ListHead; 1324 UINT16 ObjectSize; 1325 UINT16 MaxDepth; 1326 UINT16 CurrentDepth; 1327 1328 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1329 1330 /* Statistics for debug memory tracking only */ 1331 1332 UINT32 TotalAllocated; 1333 UINT32 TotalFreed; 1334 UINT32 MaxOccupied; 1335 UINT32 TotalSize; 1336 UINT32 CurrentTotalSize; 1337 UINT32 Requests; 1338 UINT32 Hits; 1339 #endif 1340 1341 } ACPI_MEMORY_LIST; 1342 1343 1344 /* Definitions of _OSI support */ 1345 1346 #define ACPI_VENDOR_STRINGS 0x01 1347 #define ACPI_FEATURE_STRINGS 0x02 1348 #define ACPI_ENABLE_INTERFACES 0x00 1349 #define ACPI_DISABLE_INTERFACES 0x04 1350 1351 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1352 #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1353 #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1354 #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1355 #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1356 #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1357 1358 #define ACPI_OSI_WIN_2000 0x01 1359 #define ACPI_OSI_WIN_XP 0x02 1360 #define ACPI_OSI_WIN_XP_SP1 0x03 1361 #define ACPI_OSI_WINSRV_2003 0x04 1362 #define ACPI_OSI_WIN_XP_SP2 0x05 1363 #define ACPI_OSI_WINSRV_2003_SP1 0x06 1364 #define ACPI_OSI_WIN_VISTA 0x07 1365 #define ACPI_OSI_WINSRV_2008 0x08 1366 #define ACPI_OSI_WIN_VISTA_SP1 0x09 1367 #define ACPI_OSI_WIN_VISTA_SP2 0x0A 1368 #define ACPI_OSI_WIN_7 0x0B 1369 #define ACPI_OSI_WIN_8 0x0C 1370 #define ACPI_OSI_WIN_10 0x0D 1371 1372 1373 /* Definitions of file IO */ 1374 1375 #define ACPI_FILE_READING 0x01 1376 #define ACPI_FILE_WRITING 0x02 1377 #define ACPI_FILE_BINARY 0x04 1378 1379 #define ACPI_FILE_BEGIN 0x01 1380 #define ACPI_FILE_END 0x02 1381 1382 1383 /* Definitions of getopt */ 1384 1385 #define ACPI_OPT_END -1 1386 1387 1388 #endif /* __ACTYPES_H__ */ 1389