1 /*        $NetBSD: qereg.h,v 1.7 2009/09/19 11:53:42 tsutsui Exp $    */
2 
3 /*-
4  * Copyright (c) 1999 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Paul Kranenburg.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*
33  * Copyright (c) 1998 Jason L. Wright.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  * 1. Redistributions of source code must retain the above copyright
40  *    notice, this list of conditions and the following disclaimer.
41  * 2. Redistributions in binary form must reproduce the above copyright
42  *    notice, this list of conditions and the following disclaimer in the
43  *    documentation and/or other materials provided with the distribution.
44  * 3. The name of the authors may not be used to endorse or promote products
45  *    derived from this software without specific prior written permission.
46  *
47  * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
48  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
49  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
50  * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
51  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
52  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
53  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
54  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
55  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
56  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57  */
58 
59 /*
60  * QE Channel registers
61  */
62 #if 0
63 struct qe_cregs {
64           uint32_t ctrl;                /* control */
65           uint32_t stat;                /* status */
66           uint32_t rxds;                /* rx descriptor ring ptr */
67           uint32_t txds;                /* tx descriptor ring ptr */
68           uint32_t rimask;    /* rx interrupt mask */
69           uint32_t timask;    /* tx interrupt mask */
70           uint32_t qmask;               /* qec error interrupt mask */
71           uint32_t mmask;               /* mace error interrupt mask */
72           uint32_t rxwbufptr; /* local memory rx write ptr */
73           uint32_t rxrbufptr; /* local memory rx read ptr */
74           uint32_t txwbufptr; /* local memory tx write ptr */
75           uint32_t txrbufptr; /* local memory tx read ptr */
76           uint32_t ccnt;                /* collision counter */
77           uint32_t pipg;                /* inter-frame gap */
78 };
79 #endif
80 /* register indices: */
81 #define QE_CRI_CTRL (0*4)
82 #define QE_CRI_STAT (1*4)
83 #define QE_CRI_RXDS (2*4)
84 #define QE_CRI_TXDS (3*4)
85 #define QE_CRI_RIMASK         (4*4)
86 #define QE_CRI_TIMASK         (5*4)
87 #define QE_CRI_QMASK          (6*4)
88 #define QE_CRI_MMASK          (7*4)
89 #define QE_CRI_RXWBUF         (8*4)
90 #define QE_CRI_RXRBUF         (9*4)
91 #define QE_CRI_TXWBUF         (10*4)
92 #define QE_CRI_TXRBUF         (11*4)
93 #define QE_CRI_CCNT (12*4)
94 #define QE_CRI_PIPG (13*4)
95 
96 /* qe_cregs.ctrl: control. */
97 #define   QE_CR_CTRL_RXOFF    0x00000004          /* disable receiver */
98 #define   QE_CR_CTRL_RESET    0x00000002          /* reset this channel */
99 #define   QE_CR_CTRL_TWAKEUP  0x00000001          /* tx DMA wakeup */
100 
101 /* qe_cregs.stat: status. */
102 #define   QE_CR_STAT_EDEFER   0x10000000          /* excessive defers */
103 #define   QE_CR_STAT_CLOSS    0x08000000          /* loss of carrier */
104 #define   QE_CR_STAT_ERETRIES 0x04000000          /* >16 retries */
105 #define   QE_CR_STAT_LCOLL    0x02000000          /* late tx collision */
106 #define   QE_CR_STAT_FUFLOW   0x01000000          /* fifo underflow */
107 #define   QE_CR_STAT_JERROR   0x00800000          /* jabber error */
108 #define   QE_CR_STAT_BERROR   0x00400000          /* babble error */
109 #define   QE_CR_STAT_TXIRQ    0x00200000          /* tx interrupt */
110 #define   QE_CR_STAT_TCCOFLOW 0x00100000          /* tx collision cntr expired */
111 #define   QE_CR_STAT_TXDERROR 0x00080000          /* tx descriptor is bad */
112 #define   QE_CR_STAT_TXLERR   0x00040000          /* tx late error */
113 #define   QE_CR_STAT_TXPERR   0x00020000          /* tx parity error */
114 #define   QE_CR_STAT_TXSERR   0x00010000          /* tx sbus error ack */
115 #define   QE_CR_STAT_RCCOFLOW 0x00001000          /* rx collision cntr expired */
116 #define   QE_CR_STAT_RUOFLOW  0x00000800          /* rx runt counter expired */
117 #define   QE_CR_STAT_MCOFLOW  0x00000400          /* rx missed counter expired */
118 #define   QE_CR_STAT_RXFOFLOW 0x00000200          /* rx fifo over flow */
119 #define   QE_CR_STAT_RLCOLL   0x00000100          /* rx late collision */
120 #define   QE_CR_STAT_FCOFLOW  0x00000080          /* rx frame counter expired */
121 #define   QE_CR_STAT_CECOFLOW 0x00000040          /* rx crc error cntr expired */
122 #define   QE_CR_STAT_RXIRQ    0x00000020          /* rx interrupt */
123 #define   QE_CR_STAT_RXDROP   0x00000010          /* rx dropped packet */
124 #define   QE_CR_STAT_RXSMALL  0x00000008          /* rx buffer too small */
125 #define   QE_CR_STAT_RXLERR   0x00000004          /* rx late error */
126 #define   QE_CR_STAT_RXPERR   0x00000002          /* rx parity error */
127 #define   QE_CR_STAT_RXSERR   0x00000001          /* rx sbus error ack */
128 #define QE_CR_STAT_BITS                 "\177\020"                                        \
129                               "b\0RXSERR\0b\1RXPERR\0b\2RXLERR\0"               \
130                               "b\3RXSMALL\0b\4RXDROP\0b\5RXIRQ\0"               \
131                               "b\6CECOFLOW\0b\7FCOFLOW\0b\10RLCOLL\0"           \
132                               "b\11RXFOFLOW\0b\12MCOFLOW\0b\13RUOFLOW\0"        \
133                               "b\14RCCOFLOW\0b\20TXSERR\0b\21TXPERR\0"          \
134                               "b\22TXLERR\0b\23TXDERROR\0b\24TCCOFLOW\0"        \
135                               "b\25TXIRQ\0b\26BERROR\0b\27JERROR\0"             \
136                               "b\30FUFLOW\0b\31LCOLL\0b\32ERETRIES\0"           \
137                               "b\33CLOSS\0b\34EDEFER\0\0"
138 
139 /*
140  * Errors: all status bits except for TX/RX IRQ
141  */
142 #define   QE_CR_STAT_ALLERRORS          \
143           ( QE_CR_STAT_EDEFER   | QE_CR_STAT_CLOSS    | QE_CR_STAT_ERETRIES \
144           | QE_CR_STAT_LCOLL    | QE_CR_STAT_FUFLOW   | QE_CR_STAT_JERROR \
145           | QE_CR_STAT_BERROR   | QE_CR_STAT_TCCOFLOW | QE_CR_STAT_TXDERROR \
146           | QE_CR_STAT_TXLERR   | QE_CR_STAT_TXPERR   | QE_CR_STAT_TXSERR \
147           | QE_CR_STAT_RCCOFLOW | QE_CR_STAT_RUOFLOW  | QE_CR_STAT_MCOFLOW \
148           | QE_CR_STAT_RXFOFLOW | QE_CR_STAT_RLCOLL   | QE_CR_STAT_FCOFLOW \
149           | QE_CR_STAT_CECOFLOW | QE_CR_STAT_RXDROP   | QE_CR_STAT_RXSMALL \
150           | QE_CR_STAT_RXLERR   | QE_CR_STAT_RXPERR   | QE_CR_STAT_RXSERR)
151 
152 /* qe_cregs.qmask: qec error interrupt mask. */
153 #define   QE_CR_QMASK_COFLOW  0x00100000          /* collision cntr overflow */
154 #define   QE_CR_QMASK_TXDERROR          0x00080000          /* tx descriptor error */
155 #define   QE_CR_QMASK_TXLERR  0x00040000          /* tx late error */
156 #define   QE_CR_QMASK_TXPERR  0x00020000          /* tx parity error */
157 #define   QE_CR_QMASK_TXSERR  0x00010000          /* tx sbus error ack */
158 #define   QE_CR_QMASK_RXDROP  0x00000010          /* rx packet dropped */
159 #define   QE_CR_QMASK_RXSMALL 0x00000008          /* rx buffer too small */
160 #define   QE_CR_QMASK_RXLERR  0x00000004          /* rx late error */
161 #define   QE_CR_QMASK_RXPERR  0x00000002          /* rx parity error */
162 #define   QE_CR_QMASK_RXSERR  0x00000001          /* rx sbus error ack */
163 
164 /* qe_cregs.mmask: MACE error interrupt mask. */
165 #define   QE_CR_MMASK_EDEFER  0x10000000          /* excess defer */
166 #define   QE_CR_MMASK_CLOSS   0x08000000          /* carrier loss */
167 #define   QE_CR_MMASK_ERETRY  0x04000000          /* excess retry */
168 #define   QE_CR_MMASK_LCOLL   0x02000000          /* late collision error */
169 #define   QE_CR_MMASK_UFLOW   0x01000000          /* underflow */
170 #define   QE_CR_MMASK_JABBER  0x00800000          /* jabber error */
171 #define   QE_CR_MMASK_BABBLE  0x00400000          /* babble error */
172 #define   QE_CR_MMASK_OFLOW   0x00000800          /* overflow */
173 #define   QE_CR_MMASK_RXCOLL  0x00000400          /* rx coll-cntr overflow */
174 #define   QE_CR_MMASK_RPKT    0x00000200          /* runt pkt overflow */
175 #define   QE_CR_MMASK_MPKT    0x00000100          /* missed pkt overflow */
176 
177 /* qe_cregs.pipg: inter-frame gap. */
178 #define   QE_CR_PIPG_TENAB    0x00000020          /* enable throttle */
179 #define   QE_CR_PIPG_MMODE    0x00000010          /* manual mode */
180 #define   QE_CR_PIPG_WMASK    0x0000000f          /* sbus wait mask */
181 
182 /*
183  * MACE registers
184  */
185 #if 0
186 struct qe_mregs {
187           uint8_t rcvfifo;    /* [0]    receive fifo */
188           uint8_t xmtfifo;    /* [1]    transmit fifo */
189           uint8_t xmtfc;                /* [2]    transmit frame control */
190           uint8_t xmtfs;                /* [3]    transmit frame status */
191           uint8_t xmtrc;                /* [4]    tx retry count */
192           uint8_t rcvfc;                /* [5]    receive frame control */
193           uint8_t rcvfs;                /* [6]    receive frame status */
194           uint8_t fifofc;               /* [7]    fifo frame count */
195           uint8_t ir;                   /* [8]    interrupt register */
196           uint8_t imr;                  /* [9]    interrupt mask register */
197           uint8_t pr;                   /* [10]   poll register */
198           uint8_t biucc;                /* [11]   biu config control */
199           uint8_t fifocc;               /* [12]   fifo config control */
200           uint8_t maccc;                /* [13]   mac config control */
201           uint8_t plscc;                /* [14]   pls config control */
202           uint8_t phycc;                /* [15]   phy config control */
203           uint8_t chipid1;    /* [16]   chipid, low byte */
204           uint8_t chipid2;    /* [17]   chipid, high byte */
205           uint8_t iac;                  /* [18]   internal address config */
206           uint8_t _reserved0; /* [19]   reserved */
207           uint8_t ladrf;                /* [20]   logical address filter */
208           uint8_t padr;                 /* [21]   physical address */
209           uint8_t _reserved1; /* [22]   reserved */
210           uint8_t _reserved2; /* [23]   reserved */
211           uint8_t mpc;                  /* [24]   missed packet count */
212           uint8_t _reserved3; /* [25]   reserved */
213           uint8_t rntpc;                /* [26]   runt packet count */
214           uint8_t rcvcc;                /* [27]   receive collision count */
215           uint8_t _reserved4; /* [28]   reserved */
216           uint8_t utr;                  /* [29]   user test register */
217           uint8_t rtr1;                 /* [30]   reserved test register 1 */
218           uint8_t rtr2;                 /* [31]   reserved test register 2 */
219 };
220 #endif
221 /* register indices: */
222 #define QE_MRI_RCVFIFO        0         /* receive fifo */
223 #define QE_MRI_XMTFIFO        1         /* transmit fifo */
224 #define QE_MRI_XMTFC          2         /* transmit frame control */
225 #define QE_MRI_XMTFS          3         /* transmit frame status */
226 #define QE_MRI_XMTRC          4         /* tx retry count */
227 #define QE_MRI_RCVFC          5         /* receive frame control */
228 #define QE_MRI_RCVFS          6         /* receive frame status */
229 #define QE_MRI_FIFOFC         7         /* fifo frame count */
230 #define QE_MRI_IR   8         /* interrupt register */
231 #define QE_MRI_IMR  9         /* interrupt mask register */
232 #define QE_MRI_PR   10        /* poll register */
233 #define QE_MRI_BIUCC          11        /* biu config control */
234 #define QE_MRI_FIFOCC         12        /* fifo config control */
235 #define QE_MRI_MACCC          13        /* mac config control */
236 #define QE_MRI_PLSCC          14        /* pls config control */
237 #define QE_MRI_PHYCC          15        /* phy config control */
238 #define QE_MRI_CHIPID1        16        /* chipid, low byte */
239 #define QE_MRI_CHIPID2        17        /* chipid, high byte */
240 #define QE_MRI_IAC  18        /* internal address config */
241 #define QE_MRI_LADRF          20        /* logical address filter */
242 #define QE_MRI_PADR 21        /* physical address */
243 #define QE_MRI_MPC  24        /* missed packet count */
244 #define QE_MRI_RNTPC          26        /* runt packet count */
245 #define QE_MRI_RCVCC          27        /* receive collision count */
246 #define QE_MRI_UTR  29        /* user test register */
247 #define QE_MRI_RTR1 30        /* reserved test register 1 */
248 #define QE_MRI_RTR2 31        /* reserved test register 2 */
249 
250 /* qe_mregs.xmtfc: transmit frame control. */
251 #define   QE_MR_XMTFC_DRETRY  0x80                /* disable retries */
252 #define   QE_MR_XMTFC_DXMTFCS 0x08                /* disable tx fcs */
253 #define   QE_MR_XMTFC_APADXMT 0x01                /* enable auto padding */
254 
255 /* qe_mregs.xmtfs: transmit frame status. */
256 #define   QE_MR_XMTFS_XMTSV   0x80                /* tx valid */
257 #define   QE_MR_XMTFS_UFLO    0x40                /* tx underflow */
258 #define   QE_MR_XMTFS_LCOL    0x20                /* tx late collision */
259 #define   QE_MR_XMTFS_MORE    0x10                /* tx > 1 retries */
260 #define   QE_MR_XMTFS_ONE               0x08                /* tx 1 retry */
261 #define   QE_MR_XMTFS_DEFER   0x04                /* tx pkt deferred */
262 #define   QE_MR_XMTFS_LCAR    0x02                /* tx carrier lost */
263 #define   QE_MR_XMTFS_RTRY    0x01                /* tx retry error */
264 
265 /* qe_mregs.xmtrc: transmit retry count. */
266 #define   QE_MR_XMTRC_EXDEF   0x80                /* tx excess defers */
267 #define   QE_MR_XMTRC_XMTRC   0x0f                /* tx retry count mask */
268 
269 /* qe_mregs.rcvfc: receive frame control. */
270 #define   QE_MR_RCVFC_LLRCV   0x08                /* rx low latency */
271 #define   QE_MR_RCVFC_MR                0x04                /* rx addr match/reject */
272 #define   QE_MR_RCVFC_ASTRPRCV          0x01                /* rx auto strip */
273 
274 /* qe_mregs.rcvfs: receive frame status. */
275 #define   QE_MR_RCVFS_OFLO    0x80                /* rx overflow */
276 #define   QE_MR_RCVFS_CLSN    0x40                /* rx late collision */
277 #define   QE_MR_RCVFS_FRAM    0x20                /* rx framing error */
278 #define   QE_MR_RCVFS_FCS               0x10                /* rx fcs error */
279 #define   QE_MR_RCVFS_RCVCNT  0x0f                /* rx msg byte count mask */
280 
281 /* qe_mregs.fifofc: fifo frame count. */
282 #define   QE_MR_FIFOFC_RCVFC  0xf0                /* rx fifo frame count */
283 #define   QE_MR_FIFOFC_XMTFC  0x0f                /* tx fifo frame count */
284 
285 /* qe_mregs.ir: interrupt register. */
286 #define   QE_MR_IR_JAB                  0x80                /* jabber error */
287 #define   QE_MR_IR_BABL                 0x40                /* babble error */
288 #define   QE_MR_IR_CERR                 0x20                /* collision error */
289 #define   QE_MR_IR_RCVCCO               0x10                /* collision cnt overflow */
290 #define   QE_MR_IR_RNTPCO               0x08                /* runt pkt cnt overflow */
291 #define   QE_MR_IR_MPCO                 0x04                /* miss pkt cnt overflow */
292 #define   QE_MR_IR_RCVINT               0x02                /* packet received */
293 #define   QE_MR_IR_XMTINT               0x01                /* packet transmitted */
294 
295 /* qe_mregs.imr: interrupt mask register. */
296 #define   QE_MR_IMR_JABM                0x80                /* jabber errors */
297 #define   QE_MR_IMR_BABLM               0x40                /* babble errors */
298 #define   QE_MR_IMR_CERRM               0x20                /* collision errors */
299 #define   QE_MR_IMR_RCVCCOM   0x10                /* rx collision count oflow */
300 #define   QE_MR_IMR_RNTPCOM   0x08                /* runt pkt cnt ovrflw */
301 #define   QE_MR_IMR_MPCOM               0x04                /* miss pkt cnt ovrflw */
302 #define   QE_MR_IMR_RCVINTM   0x02                /* rx interrupts */
303 #define   QE_MR_IMR_XMTINTM   0x01                /* tx interrupts */
304 
305 /* qe_mregs.pr: poll register. */
306 #define   QE_MR_PR_XMTSV                0x80                /* tx status is valid */
307 #define   QE_MR_PR_TDTREQ               0x40                /* tx data xfer request */
308 #define   QE_MR_PR_RDTREQ               0x20                /* rx data xfer request */
309 
310 /* qe_mregs.biucc: biu config control. */
311 #define   QE_MR_BIUCC_BSWAP   0x40                /* byte swap */
312 #define   QE_MR_BIUCC_4TS               0x00                /* 4byte xmit start point */
313 #define   QE_MR_BIUCC_16TS    0x10                /* 16byte xmit start point */
314 #define   QE_MR_BIUCC_64TS    0x20                /* 64byte xmit start point */
315 #define   QE_MR_BIUCC_112TS   0x30                /* 112byte xmit start point */
316 #define   QE_MR_BIUCC_SWRST   0x01                /* sw-reset mace */
317 
318 /* qe_mregs.fifocc: fifo config control. */
319 #define   QE_MR_FIFOCC_TXF8   0x00                /* tx fifo 8 write cycles */
320 #define   QE_MR_FIFOCC_TXF32  0x80                /* tx fifo 32 write cycles */
321 #define   QE_MR_FIFOCC_TXF16  0x40                /* tx fifo 16 write cycles */
322 #define   QE_MR_FIFOCC_RXF64  0x20                /* rx fifo 64 write cycles */
323 #define   QE_MR_FIFOCC_RXF32  0x10                /* rx fifo 32 write cycles */
324 #define   QE_MR_FIFOCC_RXF16  0x00                /* rx fifo 16 write cycles */
325 #define   QE_MR_FIFOCC_TFWU   0x08                /* tx fifo watermark update */
326 #define   QE_MR_FIFOCC_RFWU   0x04                /* rx fifo watermark update */
327 #define   QE_MR_FIFOCC_XMTBRST          0x02                /* tx burst enable */
328 #define   QE_MR_FIFOCC_RCVBRST          0x01                /* rx burst enable */
329 
330 /* qe_mregs.maccc: mac config control. */
331 #define   QE_MR_MACCC_PROM    0x80                /* promiscuous mode enable */
332 #define   QE_MR_MACCC_DXMT2PD 0x40                /* tx 2part deferral enable */
333 #define   QE_MR_MACCC_EMBA    0x20                /* modified backoff enable */
334 #define   QE_MR_MACCC_DRCVPA  0x08                /* rx physical addr disable */
335 #define   QE_MR_MACCC_DRCVBC  0x04                /* rx broadcast disable */
336 #define   QE_MR_MACCC_ENXMT   0x02                /* enable transmitter */
337 #define   QE_MR_MACCC_ENRCV   0x01                /* enable receiver */
338 
339 /* qe_mregs.plscc: pls config control. */
340 #define   QE_MR_PLSCC_XMTSEL  0x08                /* tx mode select */
341 #define QE_MR_PLSCC_PORTMASK  0x06                /* port selection bits */
342 #define    QE_MR_PLSCC_GPSI   0x06                /* use gpsi connector */
343 #define    QE_MR_PLSCC_DAI    0x04                /* use dai connector */
344 #define    QE_MR_PLSCC_TP               0x02                /* use twistedpair connector */
345 #define    QE_MR_PLSCC_AUI    0x00                /* use aui connector */
346 #define   QE_MR_PLSCC_ENPLSIO 0x01                /* pls i/o enable */
347 
348 /* qe_mregs.phycc: phy config control. */
349 #define   QE_MR_PHYCC_LNKFL   0x80                /* link fail */
350 #define   QE_MR_PHYCC_DLNKTST 0x40                /* disable link test logic */
351 #define   QE_MR_PHYCC_REVPOL  0x20                /* rx polarity */
352 #define   QE_MR_PHYCC_DAPC    0x10                /* autopolaritycorrect disab */
353 #define   QE_MR_PHYCC_LRT               0x08                /* select low threshold */
354 #define   QE_MR_PHYCC_ASEL    0x04                /* connector port auto-sel */
355 #define   QE_MR_PHYCC_RWAKE   0x02                /* remote wakeup */
356 #define   QE_MR_PHYCC_AWAKE   0x01                /* auto wakeup */
357 
358 /* qe_mregs.iac: internal address config. */
359 #define   QE_MR_IAC_ADDRCHG   0x80                /* start address change */
360 #define   QE_MR_IAC_PHYADDR   0x04                /* physical address reset */
361 #define   QE_MR_IAC_LOGADDR   0x02                /* logical address reset */
362 
363 /* qe_mregs.utr: user test register. */
364 #define   QE_MR_UTR_RTRE                0x80                /* enable resv test register */
365 #define   QE_MR_UTR_RTRD                0x40                /* disab resv test register */
366 #define   QE_MR_UTR_RPA                 0x20                /* accept runt packets */
367 #define   QE_MR_UTR_FCOLL               0x10                /* force collision status */
368 #define   QE_MR_UTR_RCVSFCSE  0x08                /* enable fcs on rx */
369 #define   QE_MR_UTR_INTLOOPM  0x06                /* Internal loopback w/mandec */
370 #define   QE_MR_UTR_INTLOOP   0x04                /* Internal loopback */
371 #define   QE_MR_UTR_EXTLOOP   0x02                /* external loopback */
372 #define   QE_MR_UTR_NOLOOP    0x00                /* no loopback */
373 
374 /* Buffer and Ring sizes: fixed ring size */
375 #define   QE_TX_RING_MAXSIZE  256                 /* maximum tx ring size */
376 #define   QE_RX_RING_MAXSIZE  256                 /* maximum rx ring size */
377 #define   QE_TX_RING_SIZE               16
378 #define   QE_RX_RING_SIZE               16
379 #define   QE_PKT_BUF_SZ                 2048
380 
381 #define   MC_POLY_LE                    0xedb88320          /* mcast crc, little endian */
382