1 #include <sys/cdefs.h>
2 __FBSDID("$FreeBSD: stable/9/sys/dev/usb/controller/avr32dci.c 257040 2013-10-24 06:06:17Z hselasky $");
3
4 /*-
5 * Copyright (c) 2009 Hans Petter Selasky. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29 /*
30 * This file contains the driver for the AVR32 series USB Device
31 * Controller
32 */
33
34 /*
35 * NOTE: When the chip detects BUS-reset it will also reset the
36 * endpoints, Function-address and more.
37 */
38
39 #include <sys/stdint.h>
40 #include <sys/stddef.h>
41 #include <sys/param.h>
42 #include <sys/queue.h>
43 #include <sys/types.h>
44 #include <sys/systm.h>
45 #include <sys/kernel.h>
46 #include <sys/bus.h>
47 #include <sys/module.h>
48 #include <sys/lock.h>
49 #include <sys/mutex.h>
50 #include <sys/condvar.h>
51 #include <sys/sysctl.h>
52 #include <sys/sx.h>
53 #include <sys/unistd.h>
54 #include <sys/callout.h>
55 #include <sys/malloc.h>
56 #include <sys/priv.h>
57
58 #include <dev/usb/usb.h>
59 #include <dev/usb/usbdi.h>
60
61 #define USB_DEBUG_VAR avr32dci_debug
62
63 #include <dev/usb/usb_core.h>
64 #include <dev/usb/usb_debug.h>
65 #include <dev/usb/usb_busdma.h>
66 #include <dev/usb/usb_process.h>
67 #include <dev/usb/usb_transfer.h>
68 #include <dev/usb/usb_device.h>
69 #include <dev/usb/usb_hub.h>
70 #include <dev/usb/usb_util.h>
71
72 #include <dev/usb/usb_controller.h>
73 #include <dev/usb/usb_bus.h>
74 #include <dev/usb/controller/avr32dci.h>
75
76 #define AVR32_BUS2SC(bus) \
77 ((struct avr32dci_softc *)(((uint8_t *)(bus)) - \
78 ((uint8_t *)&(((struct avr32dci_softc *)0)->sc_bus))))
79
80 #define AVR32_PC2SC(pc) \
81 AVR32_BUS2SC(USB_DMATAG_TO_XROOT((pc)->tag_parent)->bus)
82
83 #ifdef USB_DEBUG
84 static int avr32dci_debug = 0;
85
86 static SYSCTL_NODE(_hw_usb, OID_AUTO, avr32dci, CTLFLAG_RW, 0, "USB AVR32 DCI");
87 SYSCTL_INT(_hw_usb_avr32dci, OID_AUTO, debug, CTLFLAG_RW,
88 &avr32dci_debug, 0, "AVR32 DCI debug level");
89 #endif
90
91 #define AVR32_INTR_ENDPT 1
92
93 /* prototypes */
94
95 struct usb_bus_methods avr32dci_bus_methods;
96 struct usb_pipe_methods avr32dci_device_non_isoc_methods;
97 struct usb_pipe_methods avr32dci_device_isoc_fs_methods;
98
99 static avr32dci_cmd_t avr32dci_setup_rx;
100 static avr32dci_cmd_t avr32dci_data_rx;
101 static avr32dci_cmd_t avr32dci_data_tx;
102 static avr32dci_cmd_t avr32dci_data_tx_sync;
103 static void avr32dci_device_done(struct usb_xfer *, usb_error_t);
104 static void avr32dci_do_poll(struct usb_bus *);
105 static void avr32dci_standard_done(struct usb_xfer *);
106 static void avr32dci_root_intr(struct avr32dci_softc *sc);
107
108 /*
109 * Here is a list of what the chip supports:
110 */
111 static const struct usb_hw_ep_profile
112 avr32dci_ep_profile[4] = {
113
114 [0] = {
115 .max_in_frame_size = 64,
116 .max_out_frame_size = 64,
117 .is_simplex = 1,
118 .support_control = 1,
119 },
120
121 [1] = {
122 .max_in_frame_size = 512,
123 .max_out_frame_size = 512,
124 .is_simplex = 1,
125 .support_bulk = 1,
126 .support_interrupt = 1,
127 .support_isochronous = 1,
128 .support_in = 1,
129 .support_out = 1,
130 },
131
132 [2] = {
133 .max_in_frame_size = 64,
134 .max_out_frame_size = 64,
135 .is_simplex = 1,
136 .support_bulk = 1,
137 .support_interrupt = 1,
138 .support_in = 1,
139 .support_out = 1,
140 },
141
142 [3] = {
143 .max_in_frame_size = 1024,
144 .max_out_frame_size = 1024,
145 .is_simplex = 1,
146 .support_bulk = 1,
147 .support_interrupt = 1,
148 .support_isochronous = 1,
149 .support_in = 1,
150 .support_out = 1,
151 },
152 };
153
154 static void
avr32dci_get_hw_ep_profile(struct usb_device * udev,const struct usb_hw_ep_profile ** ppf,uint8_t ep_addr)155 avr32dci_get_hw_ep_profile(struct usb_device *udev,
156 const struct usb_hw_ep_profile **ppf, uint8_t ep_addr)
157 {
158 if (ep_addr == 0)
159 *ppf = avr32dci_ep_profile;
160 else if (ep_addr < 3)
161 *ppf = avr32dci_ep_profile + 1;
162 else if (ep_addr < 5)
163 *ppf = avr32dci_ep_profile + 2;
164 else if (ep_addr < 7)
165 *ppf = avr32dci_ep_profile + 3;
166 else
167 *ppf = NULL;
168 }
169
170 static void
avr32dci_mod_ctrl(struct avr32dci_softc * sc,uint32_t set,uint32_t clear)171 avr32dci_mod_ctrl(struct avr32dci_softc *sc, uint32_t set, uint32_t clear)
172 {
173 uint32_t temp;
174
175 temp = AVR32_READ_4(sc, AVR32_CTRL);
176 temp |= set;
177 temp &= ~clear;
178 AVR32_WRITE_4(sc, AVR32_CTRL, temp);
179 }
180
181 static void
avr32dci_mod_ien(struct avr32dci_softc * sc,uint32_t set,uint32_t clear)182 avr32dci_mod_ien(struct avr32dci_softc *sc, uint32_t set, uint32_t clear)
183 {
184 uint32_t temp;
185
186 temp = AVR32_READ_4(sc, AVR32_IEN);
187 temp |= set;
188 temp &= ~clear;
189 AVR32_WRITE_4(sc, AVR32_IEN, temp);
190 }
191
192 static void
avr32dci_clocks_on(struct avr32dci_softc * sc)193 avr32dci_clocks_on(struct avr32dci_softc *sc)
194 {
195 if (sc->sc_flags.clocks_off &&
196 sc->sc_flags.port_powered) {
197
198 DPRINTFN(5, "\n");
199
200 /* turn on clocks */
201 (sc->sc_clocks_on) (&sc->sc_bus);
202
203 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_EN_USBA, 0);
204
205 sc->sc_flags.clocks_off = 0;
206 }
207 }
208
209 static void
avr32dci_clocks_off(struct avr32dci_softc * sc)210 avr32dci_clocks_off(struct avr32dci_softc *sc)
211 {
212 if (!sc->sc_flags.clocks_off) {
213
214 DPRINTFN(5, "\n");
215
216 avr32dci_mod_ctrl(sc, 0, AVR32_CTRL_DEV_EN_USBA);
217
218 /* turn clocks off */
219 (sc->sc_clocks_off) (&sc->sc_bus);
220
221 sc->sc_flags.clocks_off = 1;
222 }
223 }
224
225 static void
avr32dci_pull_up(struct avr32dci_softc * sc)226 avr32dci_pull_up(struct avr32dci_softc *sc)
227 {
228 /* pullup D+, if possible */
229
230 if (!sc->sc_flags.d_pulled_up &&
231 sc->sc_flags.port_powered) {
232 sc->sc_flags.d_pulled_up = 1;
233 avr32dci_mod_ctrl(sc, 0, AVR32_CTRL_DEV_DETACH);
234 }
235 }
236
237 static void
avr32dci_pull_down(struct avr32dci_softc * sc)238 avr32dci_pull_down(struct avr32dci_softc *sc)
239 {
240 /* pulldown D+, if possible */
241
242 if (sc->sc_flags.d_pulled_up) {
243 sc->sc_flags.d_pulled_up = 0;
244 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_DETACH, 0);
245 }
246 }
247
248 static void
avr32dci_wakeup_peer(struct avr32dci_softc * sc)249 avr32dci_wakeup_peer(struct avr32dci_softc *sc)
250 {
251 if (!sc->sc_flags.status_suspend) {
252 return;
253 }
254 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_REWAKEUP, 0);
255
256 /* wait 8 milliseconds */
257 /* Wait for reset to complete. */
258 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
259
260 /* hardware should have cleared RMWKUP bit */
261 }
262
263 static void
avr32dci_set_address(struct avr32dci_softc * sc,uint8_t addr)264 avr32dci_set_address(struct avr32dci_softc *sc, uint8_t addr)
265 {
266 DPRINTFN(5, "addr=%d\n", addr);
267
268 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_FADDR_EN | addr, 0);
269 }
270
271 static uint8_t
avr32dci_setup_rx(struct avr32dci_td * td)272 avr32dci_setup_rx(struct avr32dci_td *td)
273 {
274 struct avr32dci_softc *sc;
275 struct usb_device_request req;
276 uint16_t count;
277 uint32_t temp;
278
279 /* get pointer to softc */
280 sc = AVR32_PC2SC(td->pc);
281
282 /* check endpoint status */
283 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no));
284
285 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp);
286
287 if (!(temp & AVR32_EPTSTA_RX_SETUP)) {
288 goto not_complete;
289 }
290 /* clear did stall */
291 td->did_stall = 0;
292 /* get the packet byte count */
293 count = AVR32_EPTSTA_BYTE_COUNT(temp);
294
295 /* verify data length */
296 if (count != td->remainder) {
297 DPRINTFN(0, "Invalid SETUP packet "
298 "length, %d bytes\n", count);
299 goto not_complete;
300 }
301 if (count != sizeof(req)) {
302 DPRINTFN(0, "Unsupported SETUP packet "
303 "length, %d bytes\n", count);
304 goto not_complete;
305 }
306 /* receive data */
307 memcpy(&req, sc->physdata, sizeof(req));
308
309 /* copy data into real buffer */
310 usbd_copy_in(td->pc, 0, &req, sizeof(req));
311
312 td->offset = sizeof(req);
313 td->remainder = 0;
314
315 /* sneak peek the set address */
316 if ((req.bmRequestType == UT_WRITE_DEVICE) &&
317 (req.bRequest == UR_SET_ADDRESS)) {
318 sc->sc_dv_addr = req.wValue[0] & 0x7F;
319 /* must write address before ZLP */
320 avr32dci_mod_ctrl(sc, 0, AVR32_CTRL_DEV_FADDR_EN |
321 AVR32_CTRL_DEV_ADDR);
322 avr32dci_mod_ctrl(sc, sc->sc_dv_addr, 0);
323 } else {
324 sc->sc_dv_addr = 0xFF;
325 }
326
327 /* clear SETUP packet interrupt */
328 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(td->ep_no), AVR32_EPTSTA_RX_SETUP);
329 return (0); /* complete */
330
331 not_complete:
332 if (temp & AVR32_EPTSTA_RX_SETUP) {
333 /* clear SETUP packet interrupt */
334 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(td->ep_no), AVR32_EPTSTA_RX_SETUP);
335 }
336 /* abort any ongoing transfer */
337 if (!td->did_stall) {
338 DPRINTFN(5, "stalling\n");
339 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(td->ep_no),
340 AVR32_EPTSTA_FRCESTALL);
341 td->did_stall = 1;
342 }
343 return (1); /* not complete */
344 }
345
346 static uint8_t
avr32dci_data_rx(struct avr32dci_td * td)347 avr32dci_data_rx(struct avr32dci_td *td)
348 {
349 struct avr32dci_softc *sc;
350 struct usb_page_search buf_res;
351 uint16_t count;
352 uint32_t temp;
353 uint8_t to;
354 uint8_t got_short;
355
356 to = 4; /* don't loop forever! */
357 got_short = 0;
358
359 /* get pointer to softc */
360 sc = AVR32_PC2SC(td->pc);
361
362 repeat:
363 /* check if any of the FIFO banks have data */
364 /* check endpoint status */
365 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no));
366
367 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp);
368
369 if (temp & AVR32_EPTSTA_RX_SETUP) {
370 if (td->remainder == 0) {
371 /*
372 * We are actually complete and have
373 * received the next SETUP
374 */
375 DPRINTFN(5, "faking complete\n");
376 return (0); /* complete */
377 }
378 /*
379 * USB Host Aborted the transfer.
380 */
381 td->error = 1;
382 return (0); /* complete */
383 }
384 /* check status */
385 if (!(temp & AVR32_EPTSTA_RX_BK_RDY)) {
386 /* no data */
387 goto not_complete;
388 }
389 /* get the packet byte count */
390 count = AVR32_EPTSTA_BYTE_COUNT(temp);
391
392 /* verify the packet byte count */
393 if (count != td->max_packet_size) {
394 if (count < td->max_packet_size) {
395 /* we have a short packet */
396 td->short_pkt = 1;
397 got_short = 1;
398 } else {
399 /* invalid USB packet */
400 td->error = 1;
401 return (0); /* we are complete */
402 }
403 }
404 /* verify the packet byte count */
405 if (count > td->remainder) {
406 /* invalid USB packet */
407 td->error = 1;
408 return (0); /* we are complete */
409 }
410 while (count > 0) {
411 usbd_get_page(td->pc, td->offset, &buf_res);
412
413 /* get correct length */
414 if (buf_res.length > count) {
415 buf_res.length = count;
416 }
417 /* receive data */
418 memcpy(buf_res.buffer, sc->physdata +
419 (AVR32_EPTSTA_CURRENT_BANK(temp) << td->bank_shift) +
420 (td->ep_no << 16) + (td->offset % td->max_packet_size), buf_res.length);
421 /* update counters */
422 count -= buf_res.length;
423 td->offset += buf_res.length;
424 td->remainder -= buf_res.length;
425 }
426
427 /* clear OUT packet interrupt */
428 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(td->ep_no), AVR32_EPTSTA_RX_BK_RDY);
429
430 /* check if we are complete */
431 if ((td->remainder == 0) || got_short) {
432 if (td->short_pkt) {
433 /* we are complete */
434 return (0);
435 }
436 /* else need to receive a zero length packet */
437 }
438 if (--to) {
439 goto repeat;
440 }
441 not_complete:
442 return (1); /* not complete */
443 }
444
445 static uint8_t
avr32dci_data_tx(struct avr32dci_td * td)446 avr32dci_data_tx(struct avr32dci_td *td)
447 {
448 struct avr32dci_softc *sc;
449 struct usb_page_search buf_res;
450 uint16_t count;
451 uint8_t to;
452 uint32_t temp;
453
454 to = 4; /* don't loop forever! */
455
456 /* get pointer to softc */
457 sc = AVR32_PC2SC(td->pc);
458
459 repeat:
460
461 /* check endpoint status */
462 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no));
463
464 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp);
465
466 if (temp & AVR32_EPTSTA_RX_SETUP) {
467 /*
468 * The current transfer was aborted
469 * by the USB Host
470 */
471 td->error = 1;
472 return (0); /* complete */
473 }
474 if (temp & AVR32_EPTSTA_TX_PK_RDY) {
475 /* cannot write any data - all banks are busy */
476 goto not_complete;
477 }
478 count = td->max_packet_size;
479 if (td->remainder < count) {
480 /* we have a short packet */
481 td->short_pkt = 1;
482 count = td->remainder;
483 }
484 while (count > 0) {
485
486 usbd_get_page(td->pc, td->offset, &buf_res);
487
488 /* get correct length */
489 if (buf_res.length > count) {
490 buf_res.length = count;
491 }
492 /* transmit data */
493 memcpy(sc->physdata +
494 (AVR32_EPTSTA_CURRENT_BANK(temp) << td->bank_shift) +
495 (td->ep_no << 16) + (td->offset % td->max_packet_size),
496 buf_res.buffer, buf_res.length);
497 /* update counters */
498 count -= buf_res.length;
499 td->offset += buf_res.length;
500 td->remainder -= buf_res.length;
501 }
502
503 /* allocate FIFO bank */
504 AVR32_WRITE_4(sc, AVR32_EPTCTL(td->ep_no), AVR32_EPTCTL_TX_PK_RDY);
505
506 /* check remainder */
507 if (td->remainder == 0) {
508 if (td->short_pkt) {
509 return (0); /* complete */
510 }
511 /* else we need to transmit a short packet */
512 }
513 if (--to) {
514 goto repeat;
515 }
516 not_complete:
517 return (1); /* not complete */
518 }
519
520 static uint8_t
avr32dci_data_tx_sync(struct avr32dci_td * td)521 avr32dci_data_tx_sync(struct avr32dci_td *td)
522 {
523 struct avr32dci_softc *sc;
524 uint32_t temp;
525
526 /* get pointer to softc */
527 sc = AVR32_PC2SC(td->pc);
528
529 /* check endpoint status */
530 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no));
531
532 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp);
533
534 if (temp & AVR32_EPTSTA_RX_SETUP) {
535 DPRINTFN(5, "faking complete\n");
536 /* Race condition */
537 return (0); /* complete */
538 }
539 /*
540 * The control endpoint has only got one bank, so if that bank
541 * is free the packet has been transferred!
542 */
543 if (AVR32_EPTSTA_BUSY_BANK_STA(temp) != 0) {
544 /* cannot write any data - a bank is busy */
545 goto not_complete;
546 }
547 if (sc->sc_dv_addr != 0xFF) {
548 /* set new address */
549 avr32dci_set_address(sc, sc->sc_dv_addr);
550 }
551 return (0); /* complete */
552
553 not_complete:
554 return (1); /* not complete */
555 }
556
557 static uint8_t
avr32dci_xfer_do_fifo(struct usb_xfer * xfer)558 avr32dci_xfer_do_fifo(struct usb_xfer *xfer)
559 {
560 struct avr32dci_td *td;
561
562 DPRINTFN(9, "\n");
563
564 td = xfer->td_transfer_cache;
565 while (1) {
566 if ((td->func) (td)) {
567 /* operation in progress */
568 break;
569 }
570 if (((void *)td) == xfer->td_transfer_last) {
571 goto done;
572 }
573 if (td->error) {
574 goto done;
575 } else if (td->remainder > 0) {
576 /*
577 * We had a short transfer. If there is no alternate
578 * next, stop processing !
579 */
580 if (!td->alt_next) {
581 goto done;
582 }
583 }
584 /*
585 * Fetch the next transfer descriptor and transfer
586 * some flags to the next transfer descriptor
587 */
588 td = td->obj_next;
589 xfer->td_transfer_cache = td;
590 }
591 return (1); /* not complete */
592
593 done:
594 /* compute all actual lengths */
595
596 avr32dci_standard_done(xfer);
597 return (0); /* complete */
598 }
599
600 static void
avr32dci_interrupt_poll(struct avr32dci_softc * sc)601 avr32dci_interrupt_poll(struct avr32dci_softc *sc)
602 {
603 struct usb_xfer *xfer;
604
605 repeat:
606 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
607 if (!avr32dci_xfer_do_fifo(xfer)) {
608 /* queue has been modified */
609 goto repeat;
610 }
611 }
612 }
613
614 void
avr32dci_vbus_interrupt(struct avr32dci_softc * sc,uint8_t is_on)615 avr32dci_vbus_interrupt(struct avr32dci_softc *sc, uint8_t is_on)
616 {
617 DPRINTFN(5, "vbus = %u\n", is_on);
618
619 if (is_on) {
620 if (!sc->sc_flags.status_vbus) {
621 sc->sc_flags.status_vbus = 1;
622
623 /* complete root HUB interrupt endpoint */
624
625 avr32dci_root_intr(sc);
626 }
627 } else {
628 if (sc->sc_flags.status_vbus) {
629 sc->sc_flags.status_vbus = 0;
630 sc->sc_flags.status_bus_reset = 0;
631 sc->sc_flags.status_suspend = 0;
632 sc->sc_flags.change_suspend = 0;
633 sc->sc_flags.change_connect = 1;
634
635 /* complete root HUB interrupt endpoint */
636
637 avr32dci_root_intr(sc);
638 }
639 }
640 }
641
642 void
avr32dci_interrupt(struct avr32dci_softc * sc)643 avr32dci_interrupt(struct avr32dci_softc *sc)
644 {
645 uint32_t status;
646
647 USB_BUS_LOCK(&sc->sc_bus);
648
649 /* read interrupt status */
650 status = AVR32_READ_4(sc, AVR32_INTSTA);
651
652 /* clear all set interrupts */
653 AVR32_WRITE_4(sc, AVR32_CLRINT, status);
654
655 DPRINTFN(14, "INTSTA=0x%08x\n", status);
656
657 /* check for any bus state change interrupts */
658 if (status & AVR32_INT_ENDRESET) {
659
660 DPRINTFN(5, "end of reset\n");
661
662 /* set correct state */
663 sc->sc_flags.status_bus_reset = 1;
664 sc->sc_flags.status_suspend = 0;
665 sc->sc_flags.change_suspend = 0;
666 sc->sc_flags.change_connect = 1;
667
668 /* disable resume interrupt */
669 avr32dci_mod_ien(sc, AVR32_INT_DET_SUSPD |
670 AVR32_INT_ENDRESET, AVR32_INT_WAKE_UP);
671
672 /* complete root HUB interrupt endpoint */
673 avr32dci_root_intr(sc);
674 }
675 /*
676 * If resume and suspend is set at the same time we interpret
677 * that like RESUME. Resume is set when there is at least 3
678 * milliseconds of inactivity on the USB BUS.
679 */
680 if (status & AVR32_INT_WAKE_UP) {
681
682 DPRINTFN(5, "resume interrupt\n");
683
684 if (sc->sc_flags.status_suspend) {
685 /* update status bits */
686 sc->sc_flags.status_suspend = 0;
687 sc->sc_flags.change_suspend = 1;
688
689 /* disable resume interrupt */
690 avr32dci_mod_ien(sc, AVR32_INT_DET_SUSPD |
691 AVR32_INT_ENDRESET, AVR32_INT_WAKE_UP);
692
693 /* complete root HUB interrupt endpoint */
694 avr32dci_root_intr(sc);
695 }
696 } else if (status & AVR32_INT_DET_SUSPD) {
697
698 DPRINTFN(5, "suspend interrupt\n");
699
700 if (!sc->sc_flags.status_suspend) {
701 /* update status bits */
702 sc->sc_flags.status_suspend = 1;
703 sc->sc_flags.change_suspend = 1;
704
705 /* disable suspend interrupt */
706 avr32dci_mod_ien(sc, AVR32_INT_WAKE_UP |
707 AVR32_INT_ENDRESET, AVR32_INT_DET_SUSPD);
708
709 /* complete root HUB interrupt endpoint */
710 avr32dci_root_intr(sc);
711 }
712 }
713 /* check for any endpoint interrupts */
714 if (status & -AVR32_INT_EPT_INT(0)) {
715
716 DPRINTFN(5, "real endpoint interrupt\n");
717
718 avr32dci_interrupt_poll(sc);
719 }
720 USB_BUS_UNLOCK(&sc->sc_bus);
721 }
722
723 static void
avr32dci_setup_standard_chain_sub(struct avr32dci_std_temp * temp)724 avr32dci_setup_standard_chain_sub(struct avr32dci_std_temp *temp)
725 {
726 struct avr32dci_td *td;
727
728 /* get current Transfer Descriptor */
729 td = temp->td_next;
730 temp->td = td;
731
732 /* prepare for next TD */
733 temp->td_next = td->obj_next;
734
735 /* fill out the Transfer Descriptor */
736 td->func = temp->func;
737 td->pc = temp->pc;
738 td->offset = temp->offset;
739 td->remainder = temp->len;
740 td->error = 0;
741 td->did_stall = temp->did_stall;
742 td->short_pkt = temp->short_pkt;
743 td->alt_next = temp->setup_alt_next;
744 }
745
746 static void
avr32dci_setup_standard_chain(struct usb_xfer * xfer)747 avr32dci_setup_standard_chain(struct usb_xfer *xfer)
748 {
749 struct avr32dci_std_temp temp;
750 struct avr32dci_softc *sc;
751 struct avr32dci_td *td;
752 uint32_t x;
753 uint8_t ep_no;
754 uint8_t need_sync;
755
756 DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
757 xfer->address, UE_GET_ADDR(xfer->endpointno),
758 xfer->sumlen, usbd_get_speed(xfer->xroot->udev));
759
760 temp.max_frame_size = xfer->max_frame_size;
761
762 td = xfer->td_start[0];
763 xfer->td_transfer_first = td;
764 xfer->td_transfer_cache = td;
765
766 /* setup temp */
767
768 temp.pc = NULL;
769 temp.td = NULL;
770 temp.td_next = xfer->td_start[0];
771 temp.offset = 0;
772 temp.setup_alt_next = xfer->flags_int.short_frames_ok;
773 temp.did_stall = !xfer->flags_int.control_stall;
774
775 sc = AVR32_BUS2SC(xfer->xroot->bus);
776 ep_no = (xfer->endpointno & UE_ADDR);
777
778 /* check if we should prepend a setup message */
779
780 if (xfer->flags_int.control_xfr) {
781 if (xfer->flags_int.control_hdr) {
782
783 temp.func = &avr32dci_setup_rx;
784 temp.len = xfer->frlengths[0];
785 temp.pc = xfer->frbuffers + 0;
786 temp.short_pkt = temp.len ? 1 : 0;
787 /* check for last frame */
788 if (xfer->nframes == 1) {
789 /* no STATUS stage yet, SETUP is last */
790 if (xfer->flags_int.control_act)
791 temp.setup_alt_next = 0;
792 }
793 avr32dci_setup_standard_chain_sub(&temp);
794 }
795 x = 1;
796 } else {
797 x = 0;
798 }
799
800 if (x != xfer->nframes) {
801 if (xfer->endpointno & UE_DIR_IN) {
802 temp.func = &avr32dci_data_tx;
803 need_sync = 1;
804 } else {
805 temp.func = &avr32dci_data_rx;
806 need_sync = 0;
807 }
808
809 /* setup "pc" pointer */
810 temp.pc = xfer->frbuffers + x;
811 } else {
812 need_sync = 0;
813 }
814 while (x != xfer->nframes) {
815
816 /* DATA0 / DATA1 message */
817
818 temp.len = xfer->frlengths[x];
819
820 x++;
821
822 if (x == xfer->nframes) {
823 if (xfer->flags_int.control_xfr) {
824 if (xfer->flags_int.control_act) {
825 temp.setup_alt_next = 0;
826 }
827 } else {
828 temp.setup_alt_next = 0;
829 }
830 }
831 if (temp.len == 0) {
832
833 /* make sure that we send an USB packet */
834
835 temp.short_pkt = 0;
836
837 } else {
838
839 /* regular data transfer */
840
841 temp.short_pkt = (xfer->flags.force_short_xfer) ? 0 : 1;
842 }
843
844 avr32dci_setup_standard_chain_sub(&temp);
845
846 if (xfer->flags_int.isochronous_xfr) {
847 temp.offset += temp.len;
848 } else {
849 /* get next Page Cache pointer */
850 temp.pc = xfer->frbuffers + x;
851 }
852 }
853
854 if (xfer->flags_int.control_xfr) {
855
856 /* always setup a valid "pc" pointer for status and sync */
857 temp.pc = xfer->frbuffers + 0;
858 temp.len = 0;
859 temp.short_pkt = 0;
860 temp.setup_alt_next = 0;
861
862 /* check if we need to sync */
863 if (need_sync) {
864 /* we need a SYNC point after TX */
865 temp.func = &avr32dci_data_tx_sync;
866 avr32dci_setup_standard_chain_sub(&temp);
867 }
868 /* check if we should append a status stage */
869 if (!xfer->flags_int.control_act) {
870
871 /*
872 * Send a DATA1 message and invert the current
873 * endpoint direction.
874 */
875 if (xfer->endpointno & UE_DIR_IN) {
876 temp.func = &avr32dci_data_rx;
877 need_sync = 0;
878 } else {
879 temp.func = &avr32dci_data_tx;
880 need_sync = 1;
881 }
882
883 avr32dci_setup_standard_chain_sub(&temp);
884 if (need_sync) {
885 /* we need a SYNC point after TX */
886 temp.func = &avr32dci_data_tx_sync;
887 avr32dci_setup_standard_chain_sub(&temp);
888 }
889 }
890 }
891 /* must have at least one frame! */
892 td = temp.td;
893 xfer->td_transfer_last = td;
894 }
895
896 static void
avr32dci_timeout(void * arg)897 avr32dci_timeout(void *arg)
898 {
899 struct usb_xfer *xfer = arg;
900
901 DPRINTF("xfer=%p\n", xfer);
902
903 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
904
905 /* transfer is transferred */
906 avr32dci_device_done(xfer, USB_ERR_TIMEOUT);
907 }
908
909 static void
avr32dci_start_standard_chain(struct usb_xfer * xfer)910 avr32dci_start_standard_chain(struct usb_xfer *xfer)
911 {
912 DPRINTFN(9, "\n");
913
914 /* poll one time - will turn on interrupts */
915 if (avr32dci_xfer_do_fifo(xfer)) {
916 uint8_t ep_no = xfer->endpointno & UE_ADDR;
917 struct avr32dci_softc *sc = AVR32_BUS2SC(xfer->xroot->bus);
918
919 avr32dci_mod_ien(sc, AVR32_INT_EPT_INT(ep_no), 0);
920
921 /* put transfer on interrupt queue */
922 usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer);
923
924 /* start timeout, if any */
925 if (xfer->timeout != 0) {
926 usbd_transfer_timeout_ms(xfer,
927 &avr32dci_timeout, xfer->timeout);
928 }
929 }
930 }
931
932 static void
avr32dci_root_intr(struct avr32dci_softc * sc)933 avr32dci_root_intr(struct avr32dci_softc *sc)
934 {
935 DPRINTFN(9, "\n");
936
937 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
938
939 /* set port bit */
940 sc->sc_hub_idata[0] = 0x02; /* we only have one port */
941
942 uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata,
943 sizeof(sc->sc_hub_idata));
944 }
945
946 static usb_error_t
avr32dci_standard_done_sub(struct usb_xfer * xfer)947 avr32dci_standard_done_sub(struct usb_xfer *xfer)
948 {
949 struct avr32dci_td *td;
950 uint32_t len;
951 uint8_t error;
952
953 DPRINTFN(9, "\n");
954
955 td = xfer->td_transfer_cache;
956
957 do {
958 len = td->remainder;
959
960 if (xfer->aframes != xfer->nframes) {
961 /*
962 * Verify the length and subtract
963 * the remainder from "frlengths[]":
964 */
965 if (len > xfer->frlengths[xfer->aframes]) {
966 td->error = 1;
967 } else {
968 xfer->frlengths[xfer->aframes] -= len;
969 }
970 }
971 /* Check for transfer error */
972 if (td->error) {
973 /* the transfer is finished */
974 error = 1;
975 td = NULL;
976 break;
977 }
978 /* Check for short transfer */
979 if (len > 0) {
980 if (xfer->flags_int.short_frames_ok) {
981 /* follow alt next */
982 if (td->alt_next) {
983 td = td->obj_next;
984 } else {
985 td = NULL;
986 }
987 } else {
988 /* the transfer is finished */
989 td = NULL;
990 }
991 error = 0;
992 break;
993 }
994 td = td->obj_next;
995
996 /* this USB frame is complete */
997 error = 0;
998 break;
999
1000 } while (0);
1001
1002 /* update transfer cache */
1003
1004 xfer->td_transfer_cache = td;
1005
1006 return (error ?
1007 USB_ERR_STALLED : USB_ERR_NORMAL_COMPLETION);
1008 }
1009
1010 static void
avr32dci_standard_done(struct usb_xfer * xfer)1011 avr32dci_standard_done(struct usb_xfer *xfer)
1012 {
1013 usb_error_t err = 0;
1014
1015 DPRINTFN(13, "xfer=%p pipe=%p transfer done\n",
1016 xfer, xfer->endpoint);
1017
1018 /* reset scanner */
1019
1020 xfer->td_transfer_cache = xfer->td_transfer_first;
1021
1022 if (xfer->flags_int.control_xfr) {
1023
1024 if (xfer->flags_int.control_hdr) {
1025
1026 err = avr32dci_standard_done_sub(xfer);
1027 }
1028 xfer->aframes = 1;
1029
1030 if (xfer->td_transfer_cache == NULL) {
1031 goto done;
1032 }
1033 }
1034 while (xfer->aframes != xfer->nframes) {
1035
1036 err = avr32dci_standard_done_sub(xfer);
1037 xfer->aframes++;
1038
1039 if (xfer->td_transfer_cache == NULL) {
1040 goto done;
1041 }
1042 }
1043
1044 if (xfer->flags_int.control_xfr &&
1045 !xfer->flags_int.control_act) {
1046
1047 err = avr32dci_standard_done_sub(xfer);
1048 }
1049 done:
1050 avr32dci_device_done(xfer, err);
1051 }
1052
1053 /*------------------------------------------------------------------------*
1054 * avr32dci_device_done
1055 *
1056 * NOTE: this function can be called more than one time on the
1057 * same USB transfer!
1058 *------------------------------------------------------------------------*/
1059 static void
avr32dci_device_done(struct usb_xfer * xfer,usb_error_t error)1060 avr32dci_device_done(struct usb_xfer *xfer, usb_error_t error)
1061 {
1062 struct avr32dci_softc *sc = AVR32_BUS2SC(xfer->xroot->bus);
1063 uint8_t ep_no;
1064
1065 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
1066
1067 DPRINTFN(9, "xfer=%p, pipe=%p, error=%d\n",
1068 xfer, xfer->endpoint, error);
1069
1070 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
1071 ep_no = (xfer->endpointno & UE_ADDR);
1072
1073 /* disable endpoint interrupt */
1074 avr32dci_mod_ien(sc, 0, AVR32_INT_EPT_INT(ep_no));
1075
1076 DPRINTFN(15, "disabled interrupts!\n");
1077 }
1078 /* dequeue transfer and start next transfer */
1079 usbd_transfer_done(xfer, error);
1080 }
1081
1082 static void
avr32dci_set_stall(struct usb_device * udev,struct usb_xfer * xfer,struct usb_endpoint * pipe,uint8_t * did_stall)1083 avr32dci_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
1084 struct usb_endpoint *pipe, uint8_t *did_stall)
1085 {
1086 struct avr32dci_softc *sc;
1087 uint8_t ep_no;
1088
1089 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
1090
1091 DPRINTFN(5, "pipe=%p\n", pipe);
1092
1093 if (xfer) {
1094 /* cancel any ongoing transfers */
1095 avr32dci_device_done(xfer, USB_ERR_STALLED);
1096 }
1097 sc = AVR32_BUS2SC(udev->bus);
1098 /* get endpoint number */
1099 ep_no = (pipe->edesc->bEndpointAddress & UE_ADDR);
1100 /* set stall */
1101 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(ep_no), AVR32_EPTSTA_FRCESTALL);
1102 }
1103
1104 static void
avr32dci_clear_stall_sub(struct avr32dci_softc * sc,uint8_t ep_no,uint8_t ep_type,uint8_t ep_dir)1105 avr32dci_clear_stall_sub(struct avr32dci_softc *sc, uint8_t ep_no,
1106 uint8_t ep_type, uint8_t ep_dir)
1107 {
1108 const struct usb_hw_ep_profile *pf;
1109 uint32_t temp;
1110 uint32_t epsize;
1111 uint8_t n;
1112
1113 if (ep_type == UE_CONTROL) {
1114 /* clearing stall is not needed */
1115 return;
1116 }
1117 /* set endpoint reset */
1118 AVR32_WRITE_4(sc, AVR32_EPTRST, AVR32_EPTRST_MASK(ep_no));
1119
1120 /* set stall */
1121 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(ep_no), AVR32_EPTSTA_FRCESTALL);
1122
1123 /* reset data toggle */
1124 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(ep_no), AVR32_EPTSTA_TOGGLESQ);
1125
1126 /* clear stall */
1127 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(ep_no), AVR32_EPTSTA_FRCESTALL);
1128
1129 if (ep_type == UE_BULK) {
1130 temp = AVR32_EPTCFG_TYPE_BULK;
1131 } else if (ep_type == UE_INTERRUPT) {
1132 temp = AVR32_EPTCFG_TYPE_INTR;
1133 } else {
1134 temp = AVR32_EPTCFG_TYPE_ISOC |
1135 AVR32_EPTCFG_NB_TRANS(1);
1136 }
1137 if (ep_dir & UE_DIR_IN) {
1138 temp |= AVR32_EPTCFG_EPDIR_IN;
1139 }
1140 avr32dci_get_hw_ep_profile(NULL, &pf, ep_no);
1141
1142 /* compute endpoint size (use maximum) */
1143 epsize = pf->max_in_frame_size | pf->max_out_frame_size;
1144 n = 0;
1145 while ((epsize /= 2))
1146 n++;
1147 temp |= AVR32_EPTCFG_EPSIZE(n);
1148
1149 /* use the maximum number of banks supported */
1150 if (ep_no < 1)
1151 temp |= AVR32_EPTCFG_NBANK(1);
1152 else if (ep_no < 3)
1153 temp |= AVR32_EPTCFG_NBANK(2);
1154 else
1155 temp |= AVR32_EPTCFG_NBANK(3);
1156
1157 AVR32_WRITE_4(sc, AVR32_EPTCFG(ep_no), temp);
1158
1159 temp = AVR32_READ_4(sc, AVR32_EPTCFG(ep_no));
1160
1161 if (!(temp & AVR32_EPTCFG_EPT_MAPD)) {
1162 device_printf(sc->sc_bus.bdev, "Chip rejected configuration\n");
1163 } else {
1164 AVR32_WRITE_4(sc, AVR32_EPTCTLENB(ep_no),
1165 AVR32_EPTCTL_EPT_ENABL);
1166 }
1167 }
1168
1169 static void
avr32dci_clear_stall(struct usb_device * udev,struct usb_endpoint * pipe)1170 avr32dci_clear_stall(struct usb_device *udev, struct usb_endpoint *pipe)
1171 {
1172 struct avr32dci_softc *sc;
1173 struct usb_endpoint_descriptor *ed;
1174
1175 DPRINTFN(5, "pipe=%p\n", pipe);
1176
1177 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
1178
1179 /* check mode */
1180 if (udev->flags.usb_mode != USB_MODE_DEVICE) {
1181 /* not supported */
1182 return;
1183 }
1184 /* get softc */
1185 sc = AVR32_BUS2SC(udev->bus);
1186
1187 /* get endpoint descriptor */
1188 ed = pipe->edesc;
1189
1190 /* reset endpoint */
1191 avr32dci_clear_stall_sub(sc,
1192 (ed->bEndpointAddress & UE_ADDR),
1193 (ed->bmAttributes & UE_XFERTYPE),
1194 (ed->bEndpointAddress & (UE_DIR_IN | UE_DIR_OUT)));
1195 }
1196
1197 usb_error_t
avr32dci_init(struct avr32dci_softc * sc)1198 avr32dci_init(struct avr32dci_softc *sc)
1199 {
1200 uint8_t n;
1201
1202 DPRINTF("start\n");
1203
1204 /* set up the bus structure */
1205 sc->sc_bus.usbrev = USB_REV_1_1;
1206 sc->sc_bus.methods = &avr32dci_bus_methods;
1207
1208 USB_BUS_LOCK(&sc->sc_bus);
1209
1210 /* make sure USB is enabled */
1211 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_EN_USBA, 0);
1212
1213 /* turn on clocks */
1214 (sc->sc_clocks_on) (&sc->sc_bus);
1215
1216 /* make sure device is re-enumerated */
1217 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_DETACH, 0);
1218
1219 /* wait a little for things to stabilise */
1220 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 20);
1221
1222 /* disable interrupts */
1223 avr32dci_mod_ien(sc, 0, 0xFFFFFFFF);
1224
1225 /* enable interrupts */
1226 avr32dci_mod_ien(sc, AVR32_INT_DET_SUSPD |
1227 AVR32_INT_ENDRESET, 0);
1228
1229 /* reset all endpoints */
1230 AVR32_WRITE_4(sc, AVR32_EPTRST, (1 << AVR32_EP_MAX) - 1);
1231
1232 /* disable all endpoints */
1233 for (n = 0; n != AVR32_EP_MAX; n++) {
1234 /* disable endpoint */
1235 AVR32_WRITE_4(sc, AVR32_EPTCTLDIS(n), AVR32_EPTCTL_EPT_ENABL);
1236 }
1237
1238 /* turn off clocks */
1239
1240 avr32dci_clocks_off(sc);
1241
1242 USB_BUS_UNLOCK(&sc->sc_bus);
1243
1244 /* catch any lost interrupts */
1245
1246 avr32dci_do_poll(&sc->sc_bus);
1247
1248 return (0); /* success */
1249 }
1250
1251 void
avr32dci_uninit(struct avr32dci_softc * sc)1252 avr32dci_uninit(struct avr32dci_softc *sc)
1253 {
1254 uint8_t n;
1255
1256 USB_BUS_LOCK(&sc->sc_bus);
1257
1258 /* turn on clocks */
1259 (sc->sc_clocks_on) (&sc->sc_bus);
1260
1261 /* disable interrupts */
1262 avr32dci_mod_ien(sc, 0, 0xFFFFFFFF);
1263
1264 /* reset all endpoints */
1265 AVR32_WRITE_4(sc, AVR32_EPTRST, (1 << AVR32_EP_MAX) - 1);
1266
1267 /* disable all endpoints */
1268 for (n = 0; n != AVR32_EP_MAX; n++) {
1269 /* disable endpoint */
1270 AVR32_WRITE_4(sc, AVR32_EPTCTLDIS(n), AVR32_EPTCTL_EPT_ENABL);
1271 }
1272
1273 sc->sc_flags.port_powered = 0;
1274 sc->sc_flags.status_vbus = 0;
1275 sc->sc_flags.status_bus_reset = 0;
1276 sc->sc_flags.status_suspend = 0;
1277 sc->sc_flags.change_suspend = 0;
1278 sc->sc_flags.change_connect = 1;
1279
1280 avr32dci_pull_down(sc);
1281 avr32dci_clocks_off(sc);
1282
1283 USB_BUS_UNLOCK(&sc->sc_bus);
1284 }
1285
1286 static void
avr32dci_suspend(struct avr32dci_softc * sc)1287 avr32dci_suspend(struct avr32dci_softc *sc)
1288 {
1289 /* TODO */
1290 }
1291
1292 static void
avr32dci_resume(struct avr32dci_softc * sc)1293 avr32dci_resume(struct avr32dci_softc *sc)
1294 {
1295 /* TODO */
1296 }
1297
1298 static void
avr32dci_do_poll(struct usb_bus * bus)1299 avr32dci_do_poll(struct usb_bus *bus)
1300 {
1301 struct avr32dci_softc *sc = AVR32_BUS2SC(bus);
1302
1303 USB_BUS_LOCK(&sc->sc_bus);
1304 avr32dci_interrupt_poll(sc);
1305 USB_BUS_UNLOCK(&sc->sc_bus);
1306 }
1307
1308 /*------------------------------------------------------------------------*
1309 * at91dci bulk support
1310 * at91dci control support
1311 * at91dci interrupt support
1312 *------------------------------------------------------------------------*/
1313 static void
avr32dci_device_non_isoc_open(struct usb_xfer * xfer)1314 avr32dci_device_non_isoc_open(struct usb_xfer *xfer)
1315 {
1316 return;
1317 }
1318
1319 static void
avr32dci_device_non_isoc_close(struct usb_xfer * xfer)1320 avr32dci_device_non_isoc_close(struct usb_xfer *xfer)
1321 {
1322 avr32dci_device_done(xfer, USB_ERR_CANCELLED);
1323 }
1324
1325 static void
avr32dci_device_non_isoc_enter(struct usb_xfer * xfer)1326 avr32dci_device_non_isoc_enter(struct usb_xfer *xfer)
1327 {
1328 return;
1329 }
1330
1331 static void
avr32dci_device_non_isoc_start(struct usb_xfer * xfer)1332 avr32dci_device_non_isoc_start(struct usb_xfer *xfer)
1333 {
1334 /* setup TDs */
1335 avr32dci_setup_standard_chain(xfer);
1336 avr32dci_start_standard_chain(xfer);
1337 }
1338
1339 struct usb_pipe_methods avr32dci_device_non_isoc_methods =
1340 {
1341 .open = avr32dci_device_non_isoc_open,
1342 .close = avr32dci_device_non_isoc_close,
1343 .enter = avr32dci_device_non_isoc_enter,
1344 .start = avr32dci_device_non_isoc_start,
1345 };
1346
1347 /*------------------------------------------------------------------------*
1348 * at91dci full speed isochronous support
1349 *------------------------------------------------------------------------*/
1350 static void
avr32dci_device_isoc_fs_open(struct usb_xfer * xfer)1351 avr32dci_device_isoc_fs_open(struct usb_xfer *xfer)
1352 {
1353 return;
1354 }
1355
1356 static void
avr32dci_device_isoc_fs_close(struct usb_xfer * xfer)1357 avr32dci_device_isoc_fs_close(struct usb_xfer *xfer)
1358 {
1359 avr32dci_device_done(xfer, USB_ERR_CANCELLED);
1360 }
1361
1362 static void
avr32dci_device_isoc_fs_enter(struct usb_xfer * xfer)1363 avr32dci_device_isoc_fs_enter(struct usb_xfer *xfer)
1364 {
1365 struct avr32dci_softc *sc = AVR32_BUS2SC(xfer->xroot->bus);
1366 uint32_t temp;
1367 uint32_t nframes;
1368 uint8_t ep_no;
1369
1370 DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
1371 xfer, xfer->endpoint->isoc_next, xfer->nframes);
1372
1373 /* get the current frame index */
1374 ep_no = xfer->endpointno & UE_ADDR;
1375 nframes = (AVR32_READ_4(sc, AVR32_FNUM) / 8);
1376
1377 nframes &= AVR32_FRAME_MASK;
1378
1379 /*
1380 * check if the frame index is within the window where the frames
1381 * will be inserted
1382 */
1383 temp = (nframes - xfer->endpoint->isoc_next) & AVR32_FRAME_MASK;
1384
1385 if ((xfer->endpoint->is_synced == 0) ||
1386 (temp < xfer->nframes)) {
1387 /*
1388 * If there is data underflow or the pipe queue is
1389 * empty we schedule the transfer a few frames ahead
1390 * of the current frame position. Else two isochronous
1391 * transfers might overlap.
1392 */
1393 xfer->endpoint->isoc_next = (nframes + 3) & AVR32_FRAME_MASK;
1394 xfer->endpoint->is_synced = 1;
1395 DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
1396 }
1397 /*
1398 * compute how many milliseconds the insertion is ahead of the
1399 * current frame position:
1400 */
1401 temp = (xfer->endpoint->isoc_next - nframes) & AVR32_FRAME_MASK;
1402
1403 /*
1404 * pre-compute when the isochronous transfer will be finished:
1405 */
1406 xfer->isoc_time_complete =
1407 usb_isoc_time_expand(&sc->sc_bus, nframes) + temp +
1408 xfer->nframes;
1409
1410 /* compute frame number for next insertion */
1411 xfer->endpoint->isoc_next += xfer->nframes;
1412
1413 /* setup TDs */
1414 avr32dci_setup_standard_chain(xfer);
1415 }
1416
1417 static void
avr32dci_device_isoc_fs_start(struct usb_xfer * xfer)1418 avr32dci_device_isoc_fs_start(struct usb_xfer *xfer)
1419 {
1420 /* start TD chain */
1421 avr32dci_start_standard_chain(xfer);
1422 }
1423
1424 struct usb_pipe_methods avr32dci_device_isoc_fs_methods =
1425 {
1426 .open = avr32dci_device_isoc_fs_open,
1427 .close = avr32dci_device_isoc_fs_close,
1428 .enter = avr32dci_device_isoc_fs_enter,
1429 .start = avr32dci_device_isoc_fs_start,
1430 };
1431
1432 /*------------------------------------------------------------------------*
1433 * at91dci root control support
1434 *------------------------------------------------------------------------*
1435 * Simulate a hardware HUB by handling all the necessary requests.
1436 *------------------------------------------------------------------------*/
1437
1438 static const struct usb_device_descriptor avr32dci_devd = {
1439 .bLength = sizeof(struct usb_device_descriptor),
1440 .bDescriptorType = UDESC_DEVICE,
1441 .bcdUSB = {0x00, 0x02},
1442 .bDeviceClass = UDCLASS_HUB,
1443 .bDeviceSubClass = UDSUBCLASS_HUB,
1444 .bDeviceProtocol = UDPROTO_HSHUBSTT,
1445 .bMaxPacketSize = 64,
1446 .bcdDevice = {0x00, 0x01},
1447 .iManufacturer = 1,
1448 .iProduct = 2,
1449 .bNumConfigurations = 1,
1450 };
1451
1452 static const struct usb_device_qualifier avr32dci_odevd = {
1453 .bLength = sizeof(struct usb_device_qualifier),
1454 .bDescriptorType = UDESC_DEVICE_QUALIFIER,
1455 .bcdUSB = {0x00, 0x02},
1456 .bDeviceClass = UDCLASS_HUB,
1457 .bDeviceSubClass = UDSUBCLASS_HUB,
1458 .bDeviceProtocol = UDPROTO_FSHUB,
1459 .bMaxPacketSize0 = 0,
1460 .bNumConfigurations = 0,
1461 };
1462
1463 static const struct avr32dci_config_desc avr32dci_confd = {
1464 .confd = {
1465 .bLength = sizeof(struct usb_config_descriptor),
1466 .bDescriptorType = UDESC_CONFIG,
1467 .wTotalLength[0] = sizeof(avr32dci_confd),
1468 .bNumInterface = 1,
1469 .bConfigurationValue = 1,
1470 .iConfiguration = 0,
1471 .bmAttributes = UC_SELF_POWERED,
1472 .bMaxPower = 0,
1473 },
1474 .ifcd = {
1475 .bLength = sizeof(struct usb_interface_descriptor),
1476 .bDescriptorType = UDESC_INTERFACE,
1477 .bNumEndpoints = 1,
1478 .bInterfaceClass = UICLASS_HUB,
1479 .bInterfaceSubClass = UISUBCLASS_HUB,
1480 .bInterfaceProtocol = 0,
1481 },
1482 .endpd = {
1483 .bLength = sizeof(struct usb_endpoint_descriptor),
1484 .bDescriptorType = UDESC_ENDPOINT,
1485 .bEndpointAddress = (UE_DIR_IN | AVR32_INTR_ENDPT),
1486 .bmAttributes = UE_INTERRUPT,
1487 .wMaxPacketSize[0] = 8,
1488 .bInterval = 255,
1489 },
1490 };
1491
1492 #define HSETW(ptr, val) ptr = { (uint8_t)(val), (uint8_t)((val) >> 8) }
1493
1494 static const struct usb_hub_descriptor_min avr32dci_hubd = {
1495 .bDescLength = sizeof(avr32dci_hubd),
1496 .bDescriptorType = UDESC_HUB,
1497 .bNbrPorts = 1,
1498 HSETW(.wHubCharacteristics, (UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL)),
1499 .bPwrOn2PwrGood = 50,
1500 .bHubContrCurrent = 0,
1501 .DeviceRemovable = {0}, /* port is removable */
1502 };
1503
1504 #define STRING_LANG \
1505 0x09, 0x04, /* American English */
1506
1507 #define STRING_VENDOR \
1508 'A', 0, 'V', 0, 'R', 0, '3', 0, '2', 0
1509
1510 #define STRING_PRODUCT \
1511 'D', 0, 'C', 0, 'I', 0, ' ', 0, 'R', 0, \
1512 'o', 0, 'o', 0, 't', 0, ' ', 0, 'H', 0, \
1513 'U', 0, 'B', 0,
1514
1515 USB_MAKE_STRING_DESC(STRING_LANG, avr32dci_langtab);
1516 USB_MAKE_STRING_DESC(STRING_VENDOR, avr32dci_vendor);
1517 USB_MAKE_STRING_DESC(STRING_PRODUCT, avr32dci_product);
1518
1519 static usb_error_t
avr32dci_roothub_exec(struct usb_device * udev,struct usb_device_request * req,const void ** pptr,uint16_t * plength)1520 avr32dci_roothub_exec(struct usb_device *udev,
1521 struct usb_device_request *req, const void **pptr, uint16_t *plength)
1522 {
1523 struct avr32dci_softc *sc = AVR32_BUS2SC(udev->bus);
1524 const void *ptr;
1525 uint16_t len;
1526 uint16_t value;
1527 uint16_t index;
1528 uint32_t temp;
1529 usb_error_t err;
1530
1531 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
1532
1533 /* buffer reset */
1534 ptr = (const void *)&sc->sc_hub_temp;
1535 len = 0;
1536 err = 0;
1537
1538 value = UGETW(req->wValue);
1539 index = UGETW(req->wIndex);
1540
1541 /* demultiplex the control request */
1542
1543 switch (req->bmRequestType) {
1544 case UT_READ_DEVICE:
1545 switch (req->bRequest) {
1546 case UR_GET_DESCRIPTOR:
1547 goto tr_handle_get_descriptor;
1548 case UR_GET_CONFIG:
1549 goto tr_handle_get_config;
1550 case UR_GET_STATUS:
1551 goto tr_handle_get_status;
1552 default:
1553 goto tr_stalled;
1554 }
1555 break;
1556
1557 case UT_WRITE_DEVICE:
1558 switch (req->bRequest) {
1559 case UR_SET_ADDRESS:
1560 goto tr_handle_set_address;
1561 case UR_SET_CONFIG:
1562 goto tr_handle_set_config;
1563 case UR_CLEAR_FEATURE:
1564 goto tr_valid; /* nop */
1565 case UR_SET_DESCRIPTOR:
1566 goto tr_valid; /* nop */
1567 case UR_SET_FEATURE:
1568 default:
1569 goto tr_stalled;
1570 }
1571 break;
1572
1573 case UT_WRITE_ENDPOINT:
1574 switch (req->bRequest) {
1575 case UR_CLEAR_FEATURE:
1576 switch (UGETW(req->wValue)) {
1577 case UF_ENDPOINT_HALT:
1578 goto tr_handle_clear_halt;
1579 case UF_DEVICE_REMOTE_WAKEUP:
1580 goto tr_handle_clear_wakeup;
1581 default:
1582 goto tr_stalled;
1583 }
1584 break;
1585 case UR_SET_FEATURE:
1586 switch (UGETW(req->wValue)) {
1587 case UF_ENDPOINT_HALT:
1588 goto tr_handle_set_halt;
1589 case UF_DEVICE_REMOTE_WAKEUP:
1590 goto tr_handle_set_wakeup;
1591 default:
1592 goto tr_stalled;
1593 }
1594 break;
1595 case UR_SYNCH_FRAME:
1596 goto tr_valid; /* nop */
1597 default:
1598 goto tr_stalled;
1599 }
1600 break;
1601
1602 case UT_READ_ENDPOINT:
1603 switch (req->bRequest) {
1604 case UR_GET_STATUS:
1605 goto tr_handle_get_ep_status;
1606 default:
1607 goto tr_stalled;
1608 }
1609 break;
1610
1611 case UT_WRITE_INTERFACE:
1612 switch (req->bRequest) {
1613 case UR_SET_INTERFACE:
1614 goto tr_handle_set_interface;
1615 case UR_CLEAR_FEATURE:
1616 goto tr_valid; /* nop */
1617 case UR_SET_FEATURE:
1618 default:
1619 goto tr_stalled;
1620 }
1621 break;
1622
1623 case UT_READ_INTERFACE:
1624 switch (req->bRequest) {
1625 case UR_GET_INTERFACE:
1626 goto tr_handle_get_interface;
1627 case UR_GET_STATUS:
1628 goto tr_handle_get_iface_status;
1629 default:
1630 goto tr_stalled;
1631 }
1632 break;
1633
1634 case UT_WRITE_CLASS_INTERFACE:
1635 case UT_WRITE_VENDOR_INTERFACE:
1636 /* XXX forward */
1637 break;
1638
1639 case UT_READ_CLASS_INTERFACE:
1640 case UT_READ_VENDOR_INTERFACE:
1641 /* XXX forward */
1642 break;
1643
1644 case UT_WRITE_CLASS_DEVICE:
1645 switch (req->bRequest) {
1646 case UR_CLEAR_FEATURE:
1647 goto tr_valid;
1648 case UR_SET_DESCRIPTOR:
1649 case UR_SET_FEATURE:
1650 break;
1651 default:
1652 goto tr_stalled;
1653 }
1654 break;
1655
1656 case UT_WRITE_CLASS_OTHER:
1657 switch (req->bRequest) {
1658 case UR_CLEAR_FEATURE:
1659 goto tr_handle_clear_port_feature;
1660 case UR_SET_FEATURE:
1661 goto tr_handle_set_port_feature;
1662 case UR_CLEAR_TT_BUFFER:
1663 case UR_RESET_TT:
1664 case UR_STOP_TT:
1665 goto tr_valid;
1666
1667 default:
1668 goto tr_stalled;
1669 }
1670 break;
1671
1672 case UT_READ_CLASS_OTHER:
1673 switch (req->bRequest) {
1674 case UR_GET_TT_STATE:
1675 goto tr_handle_get_tt_state;
1676 case UR_GET_STATUS:
1677 goto tr_handle_get_port_status;
1678 default:
1679 goto tr_stalled;
1680 }
1681 break;
1682
1683 case UT_READ_CLASS_DEVICE:
1684 switch (req->bRequest) {
1685 case UR_GET_DESCRIPTOR:
1686 goto tr_handle_get_class_descriptor;
1687 case UR_GET_STATUS:
1688 goto tr_handle_get_class_status;
1689
1690 default:
1691 goto tr_stalled;
1692 }
1693 break;
1694 default:
1695 goto tr_stalled;
1696 }
1697 goto tr_valid;
1698
1699 tr_handle_get_descriptor:
1700 switch (value >> 8) {
1701 case UDESC_DEVICE:
1702 if (value & 0xff) {
1703 goto tr_stalled;
1704 }
1705 len = sizeof(avr32dci_devd);
1706 ptr = (const void *)&avr32dci_devd;
1707 goto tr_valid;
1708 case UDESC_CONFIG:
1709 if (value & 0xff) {
1710 goto tr_stalled;
1711 }
1712 len = sizeof(avr32dci_confd);
1713 ptr = (const void *)&avr32dci_confd;
1714 goto tr_valid;
1715 case UDESC_STRING:
1716 switch (value & 0xff) {
1717 case 0: /* Language table */
1718 len = sizeof(avr32dci_langtab);
1719 ptr = (const void *)&avr32dci_langtab;
1720 goto tr_valid;
1721
1722 case 1: /* Vendor */
1723 len = sizeof(avr32dci_vendor);
1724 ptr = (const void *)&avr32dci_vendor;
1725 goto tr_valid;
1726
1727 case 2: /* Product */
1728 len = sizeof(avr32dci_product);
1729 ptr = (const void *)&avr32dci_product;
1730 goto tr_valid;
1731 default:
1732 break;
1733 }
1734 break;
1735 default:
1736 goto tr_stalled;
1737 }
1738 goto tr_stalled;
1739
1740 tr_handle_get_config:
1741 len = 1;
1742 sc->sc_hub_temp.wValue[0] = sc->sc_conf;
1743 goto tr_valid;
1744
1745 tr_handle_get_status:
1746 len = 2;
1747 USETW(sc->sc_hub_temp.wValue, UDS_SELF_POWERED);
1748 goto tr_valid;
1749
1750 tr_handle_set_address:
1751 if (value & 0xFF00) {
1752 goto tr_stalled;
1753 }
1754 sc->sc_rt_addr = value;
1755 goto tr_valid;
1756
1757 tr_handle_set_config:
1758 if (value >= 2) {
1759 goto tr_stalled;
1760 }
1761 sc->sc_conf = value;
1762 goto tr_valid;
1763
1764 tr_handle_get_interface:
1765 len = 1;
1766 sc->sc_hub_temp.wValue[0] = 0;
1767 goto tr_valid;
1768
1769 tr_handle_get_tt_state:
1770 tr_handle_get_class_status:
1771 tr_handle_get_iface_status:
1772 tr_handle_get_ep_status:
1773 len = 2;
1774 USETW(sc->sc_hub_temp.wValue, 0);
1775 goto tr_valid;
1776
1777 tr_handle_set_halt:
1778 tr_handle_set_interface:
1779 tr_handle_set_wakeup:
1780 tr_handle_clear_wakeup:
1781 tr_handle_clear_halt:
1782 goto tr_valid;
1783
1784 tr_handle_clear_port_feature:
1785 if (index != 1) {
1786 goto tr_stalled;
1787 }
1788 DPRINTFN(9, "UR_CLEAR_PORT_FEATURE on port %d\n", index);
1789
1790 switch (value) {
1791 case UHF_PORT_SUSPEND:
1792 avr32dci_wakeup_peer(sc);
1793 break;
1794
1795 case UHF_PORT_ENABLE:
1796 sc->sc_flags.port_enabled = 0;
1797 break;
1798
1799 case UHF_PORT_TEST:
1800 case UHF_PORT_INDICATOR:
1801 case UHF_C_PORT_ENABLE:
1802 case UHF_C_PORT_OVER_CURRENT:
1803 case UHF_C_PORT_RESET:
1804 /* nops */
1805 break;
1806 case UHF_PORT_POWER:
1807 sc->sc_flags.port_powered = 0;
1808 avr32dci_pull_down(sc);
1809 avr32dci_clocks_off(sc);
1810 break;
1811 case UHF_C_PORT_CONNECTION:
1812 /* clear connect change flag */
1813 sc->sc_flags.change_connect = 0;
1814
1815 if (!sc->sc_flags.status_bus_reset) {
1816 /* we are not connected */
1817 break;
1818 }
1819 /* configure the control endpoint */
1820 /* set endpoint reset */
1821 AVR32_WRITE_4(sc, AVR32_EPTRST, AVR32_EPTRST_MASK(0));
1822
1823 /* set stall */
1824 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(0), AVR32_EPTSTA_FRCESTALL);
1825
1826 /* reset data toggle */
1827 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(0), AVR32_EPTSTA_TOGGLESQ);
1828
1829 /* clear stall */
1830 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(0), AVR32_EPTSTA_FRCESTALL);
1831
1832 /* configure */
1833 AVR32_WRITE_4(sc, AVR32_EPTCFG(0), AVR32_EPTCFG_TYPE_CTRL |
1834 AVR32_EPTCFG_NBANK(1) | AVR32_EPTCFG_EPSIZE(6));
1835
1836 temp = AVR32_READ_4(sc, AVR32_EPTCFG(0));
1837
1838 if (!(temp & AVR32_EPTCFG_EPT_MAPD)) {
1839 device_printf(sc->sc_bus.bdev,
1840 "Chip rejected configuration\n");
1841 } else {
1842 AVR32_WRITE_4(sc, AVR32_EPTCTLENB(0),
1843 AVR32_EPTCTL_EPT_ENABL);
1844 }
1845 break;
1846 case UHF_C_PORT_SUSPEND:
1847 sc->sc_flags.change_suspend = 0;
1848 break;
1849 default:
1850 err = USB_ERR_IOERROR;
1851 goto done;
1852 }
1853 goto tr_valid;
1854
1855 tr_handle_set_port_feature:
1856 if (index != 1) {
1857 goto tr_stalled;
1858 }
1859 DPRINTFN(9, "UR_SET_PORT_FEATURE\n");
1860
1861 switch (value) {
1862 case UHF_PORT_ENABLE:
1863 sc->sc_flags.port_enabled = 1;
1864 break;
1865 case UHF_PORT_SUSPEND:
1866 case UHF_PORT_RESET:
1867 case UHF_PORT_TEST:
1868 case UHF_PORT_INDICATOR:
1869 /* nops */
1870 break;
1871 case UHF_PORT_POWER:
1872 sc->sc_flags.port_powered = 1;
1873 break;
1874 default:
1875 err = USB_ERR_IOERROR;
1876 goto done;
1877 }
1878 goto tr_valid;
1879
1880 tr_handle_get_port_status:
1881
1882 DPRINTFN(9, "UR_GET_PORT_STATUS\n");
1883
1884 if (index != 1) {
1885 goto tr_stalled;
1886 }
1887 if (sc->sc_flags.status_vbus) {
1888 avr32dci_clocks_on(sc);
1889 avr32dci_pull_up(sc);
1890 } else {
1891 avr32dci_pull_down(sc);
1892 avr32dci_clocks_off(sc);
1893 }
1894
1895 /* Select Device Side Mode */
1896
1897 value = UPS_PORT_MODE_DEVICE;
1898
1899 /* Check for High Speed */
1900 if (AVR32_READ_4(sc, AVR32_INTSTA) & AVR32_INT_SPEED)
1901 value |= UPS_HIGH_SPEED;
1902
1903 if (sc->sc_flags.port_powered) {
1904 value |= UPS_PORT_POWER;
1905 }
1906 if (sc->sc_flags.port_enabled) {
1907 value |= UPS_PORT_ENABLED;
1908 }
1909 if (sc->sc_flags.status_vbus &&
1910 sc->sc_flags.status_bus_reset) {
1911 value |= UPS_CURRENT_CONNECT_STATUS;
1912 }
1913 if (sc->sc_flags.status_suspend) {
1914 value |= UPS_SUSPEND;
1915 }
1916 USETW(sc->sc_hub_temp.ps.wPortStatus, value);
1917
1918 value = 0;
1919
1920 if (sc->sc_flags.change_connect) {
1921 value |= UPS_C_CONNECT_STATUS;
1922 }
1923 if (sc->sc_flags.change_suspend) {
1924 value |= UPS_C_SUSPEND;
1925 }
1926 USETW(sc->sc_hub_temp.ps.wPortChange, value);
1927 len = sizeof(sc->sc_hub_temp.ps);
1928 goto tr_valid;
1929
1930 tr_handle_get_class_descriptor:
1931 if (value & 0xFF) {
1932 goto tr_stalled;
1933 }
1934 ptr = (const void *)&avr32dci_hubd;
1935 len = sizeof(avr32dci_hubd);
1936 goto tr_valid;
1937
1938 tr_stalled:
1939 err = USB_ERR_STALLED;
1940 tr_valid:
1941 done:
1942 *plength = len;
1943 *pptr = ptr;
1944 return (err);
1945 }
1946
1947 static void
avr32dci_xfer_setup(struct usb_setup_params * parm)1948 avr32dci_xfer_setup(struct usb_setup_params *parm)
1949 {
1950 const struct usb_hw_ep_profile *pf;
1951 struct avr32dci_softc *sc;
1952 struct usb_xfer *xfer;
1953 void *last_obj;
1954 uint32_t ntd;
1955 uint32_t n;
1956 uint8_t ep_no;
1957
1958 sc = AVR32_BUS2SC(parm->udev->bus);
1959 xfer = parm->curr_xfer;
1960
1961 /*
1962 * NOTE: This driver does not use any of the parameters that
1963 * are computed from the following values. Just set some
1964 * reasonable dummies:
1965 */
1966 parm->hc_max_packet_size = 0x400;
1967 parm->hc_max_packet_count = 1;
1968 parm->hc_max_frame_size = 0x400;
1969
1970 usbd_transfer_setup_sub(parm);
1971
1972 /*
1973 * compute maximum number of TDs
1974 */
1975 if ((xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) {
1976
1977 ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC 1 */
1978 + 1 /* SYNC 2 */ ;
1979 } else {
1980
1981 ntd = xfer->nframes + 1 /* SYNC */ ;
1982 }
1983
1984 /*
1985 * check if "usbd_transfer_setup_sub" set an error
1986 */
1987 if (parm->err)
1988 return;
1989
1990 /*
1991 * allocate transfer descriptors
1992 */
1993 last_obj = NULL;
1994
1995 /*
1996 * get profile stuff
1997 */
1998 ep_no = xfer->endpointno & UE_ADDR;
1999 avr32dci_get_hw_ep_profile(parm->udev, &pf, ep_no);
2000
2001 if (pf == NULL) {
2002 /* should not happen */
2003 parm->err = USB_ERR_INVAL;
2004 return;
2005 }
2006 /* align data */
2007 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
2008
2009 for (n = 0; n != ntd; n++) {
2010
2011 struct avr32dci_td *td;
2012
2013 if (parm->buf) {
2014 uint32_t temp;
2015
2016 td = USB_ADD_BYTES(parm->buf, parm->size[0]);
2017
2018 /* init TD */
2019 td->max_packet_size = xfer->max_packet_size;
2020 td->ep_no = ep_no;
2021 temp = pf->max_in_frame_size | pf->max_out_frame_size;
2022 td->bank_shift = 0;
2023 while ((temp /= 2))
2024 td->bank_shift++;
2025 if (pf->support_multi_buffer) {
2026 td->support_multi_buffer = 1;
2027 }
2028 td->obj_next = last_obj;
2029
2030 last_obj = td;
2031 }
2032 parm->size[0] += sizeof(*td);
2033 }
2034
2035 xfer->td_start[0] = last_obj;
2036 }
2037
2038 static void
avr32dci_xfer_unsetup(struct usb_xfer * xfer)2039 avr32dci_xfer_unsetup(struct usb_xfer *xfer)
2040 {
2041 return;
2042 }
2043
2044 static void
avr32dci_ep_init(struct usb_device * udev,struct usb_endpoint_descriptor * edesc,struct usb_endpoint * pipe)2045 avr32dci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
2046 struct usb_endpoint *pipe)
2047 {
2048 struct avr32dci_softc *sc = AVR32_BUS2SC(udev->bus);
2049
2050 DPRINTFN(2, "pipe=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n",
2051 pipe, udev->address,
2052 edesc->bEndpointAddress, udev->flags.usb_mode,
2053 sc->sc_rt_addr, udev->device_index);
2054
2055 if (udev->device_index != sc->sc_rt_addr) {
2056
2057 if ((udev->speed != USB_SPEED_FULL) &&
2058 (udev->speed != USB_SPEED_HIGH)) {
2059 /* not supported */
2060 return;
2061 }
2062 if ((edesc->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS)
2063 pipe->methods = &avr32dci_device_isoc_fs_methods;
2064 else
2065 pipe->methods = &avr32dci_device_non_isoc_methods;
2066 }
2067 }
2068
2069 static void
avr32dci_set_hw_power_sleep(struct usb_bus * bus,uint32_t state)2070 avr32dci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state)
2071 {
2072 struct avr32dci_softc *sc = AVR32_BUS2SC(bus);
2073
2074 switch (state) {
2075 case USB_HW_POWER_SUSPEND:
2076 avr32dci_suspend(sc);
2077 break;
2078 case USB_HW_POWER_SHUTDOWN:
2079 avr32dci_uninit(sc);
2080 break;
2081 case USB_HW_POWER_RESUME:
2082 avr32dci_resume(sc);
2083 break;
2084 default:
2085 break;
2086 }
2087 }
2088
2089 struct usb_bus_methods avr32dci_bus_methods =
2090 {
2091 .endpoint_init = &avr32dci_ep_init,
2092 .xfer_setup = &avr32dci_xfer_setup,
2093 .xfer_unsetup = &avr32dci_xfer_unsetup,
2094 .get_hw_ep_profile = &avr32dci_get_hw_ep_profile,
2095 .set_stall = &avr32dci_set_stall,
2096 .clear_stall = &avr32dci_clear_stall,
2097 .roothub_exec = &avr32dci_roothub_exec,
2098 .xfer_poll = &avr32dci_do_poll,
2099 .set_hw_power_sleep = &avr32dci_set_hw_power_sleep,
2100 };
2101