| /freebsd-12-stable/contrib/binutils/opcodes/ |
| D | mips-opc.c | 33 #define LCD INSN_LOAD_COPROC_DELAY macro
485 {"cfc0", "t,G", 0x40400000, 0xffe007ff, LCD|WR_t|RD_C0, 0, I1 },
486 {"cfc1", "t,G", 0x44400000, 0xffe007ff, LCD|WR_t|RD_C1|FP_S, 0, I1 },
487 {"cfc1", "t,S", 0x44400000, 0xffe007ff, LCD|WR_t|RD_C1|FP_S, 0, I1 },
490 {"cftc1", "d,E", 0x41000023, 0xffe007ff, TRAP|LCD|WR_d|RD_C1|FP_S, 0, MT32 },
491 {"cftc1", "d,T", 0x41000023, 0xffe007ff, TRAP|LCD|WR_d|RD_C1|FP_S, 0, MT32 },
492 {"cftc2", "d,E", 0x41000025, 0xffe007ff, TRAP|LCD|WR_d|RD_C2, 0, MT32 },
583 {"dmfc0", "t,G", 0x40200000, 0xffe007ff, LCD|WR_t|RD_C0, 0, I3 },
584 {"dmfc0", "t,+D", 0x40200000, 0xffe007f8, LCD|WR_t|RD_C0, 0, I64 },
585 {"dmfc0", "t,G,H", 0x40200000, 0xffe007f8, LCD|WR_t|RD_C0, 0, I64 },
[all …]
|
| /freebsd-12-stable/sys/gnu/dts/arm/ |
| D | logicpd-torpedo-37xx-devkit-28.dts | 6 * There are two types of 4.3" LCD, Type 15 and Type 28.
8 * uses the timing for the type 28 LCD
|
| D | omap3-devkit8000-lcd43.dts | 8 * 4.3'' LCD panel sold with devkit8000 board
13 model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
|
| D | omap3-devkit8000-lcd70.dts | 8 * 7.0'' LCD panel sold with some devkit8000 board
13 model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
|
| D | tegra30-colibri-eval-v3.dts | 159 * edt,et057090dhu: EDT 5.7" LCD TFT
160 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | tegra20-colibri-iris.dts | 205 * edt,et057090dhu: EDT 5.7" LCD TFT
206 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | imx53-tx53-x03x.dts | 49 model = "Ka-Ro electronics TX53 module (LCD)";
206 regulator-name = "LCD POWER";
216 regulator-name = "LCD RESET";
|
| D | tegra30-apalis-eval.dts | 195 * edt,et057090dhu: EDT 5.7" LCD TFT
196 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | tegra20-colibri-eval-v3.dts | 223 * edt,et057090dhu: EDT 5.7" LCD TFT
224 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | wm8850-w70v2.dts | 6 * - HongLianYing 'HLY070ML268-21A' 7" LCD panel
|
| D | tegra30-apalis-v1.1-eval.dts | 196 * edt,et057090dhu: EDT 5.7" LCD TFT
197 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | kirkwood-ts419.dtsi | 25 * JP1 indicates if an LCD module is installed
|
| D | at91-dvk_su60_somc_lcm.dtsi | 3 * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
|
| D | ep7211-edb7211.dts | 95 line-name = "LCD ENABLE";
|
| D | imx6q-apalis-ixora.dts | 111 * edt,et057090dhu: EDT 5.7" LCD TFT
112 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | imx6dl-colibri-eval-v3.dts | 126 * edt,et057090dhu: EDT 5.7" LCD TFT
127 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | imx6q-apalis-ixora-v1.1.dts | 112 * edt,et057090dhu: EDT 5.7" LCD TFT
113 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | imx6q-apalis-eval.dts | 111 * edt,et057090dhu: EDT 5.7" LCD TFT
112 * edt,et070080dh6: EDT 7.0" LCD TFT
|
| D | socfpga_arria5_socdk.dts | 93 * because the LCD module does not work at the standard 100Khz
|
| D | socfpga_cyclone5_socdk.dts | 97 * because the LCD module does not work at the standard 100Khz
|
| D | da850-evm.dts | 47 * The vpif and the LCD are mutually exclusive.
461 * The vpif and the LCD are mutually exclusive.
|
| D | socfpga_arria10_socdk.dtsi | 132 * because the LCD module does not work at the standard 100Khz
|
| D | ste-href-family-pinctrl.dtsi | 78 "lcdvsi0_a_1", /* VSI0 for LCD */
|
| D | omap3-ha-lcd.dts | 10 model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
|
| /freebsd-12-stable/usr.sbin/apmd/ |
| D | README | 96 posted by an LCD close), run the sync command 3 times and wait for a
153 SUSPEND request when the LCD is closed and put the system in a STANDBY
|