1 /*- 2 * Copyright (c) 2006 M. Warner Losh. All rights reserved. 3 * Copyright (c) 2017 Marius Strobl <marius@FreeBSD.org> 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 * 25 * Portions of this software may have been developed with reference to 26 * the SD Simplified Specification. The following disclaimer may apply: 27 * 28 * The following conditions apply to the release of the simplified 29 * specification ("Simplified Specification") by the SD Card Association and 30 * the SD Group. The Simplified Specification is a subset of the complete SD 31 * Specification which is owned by the SD Card Association and the SD 32 * Group. This Simplified Specification is provided on a non-confidential 33 * basis subject to the disclaimers below. Any implementation of the 34 * Simplified Specification may require a license from the SD Card 35 * Association, SD Group, SD-3C LLC or other third parties. 36 * 37 * Disclaimers: 38 * 39 * The information contained in the Simplified Specification is presented only 40 * as a standard specification for SD Cards and SD Host/Ancillary products and 41 * is provided "AS-IS" without any representations or warranties of any 42 * kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD 43 * Card Association for any damages, any infringements of patents or other 44 * right of the SD Group, SD-3C LLC, the SD Card Association or any third 45 * parties, which may result from its use. No license is granted by 46 * implication, estoppel or otherwise under any patent or other rights of the 47 * SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing 48 * herein shall be construed as an obligation by the SD Group, the SD-3C LLC 49 * or the SD Card Association to disclose or distribute any technical 50 * information, know-how or other confidential information to any third party. 51 * 52 * $FreeBSD: stable/10/sys/dev/mmc/mmcreg.h 338638 2018-09-13 10:18:50Z marius $ 53 */ 54 55 #ifndef DEV_MMC_MMCREG_H 56 #define DEV_MMC_MMCREG_H 57 58 /* 59 * This file contains the register definitions for the mmc and sd busses. 60 * They are taken from publicly available sources. 61 */ 62 63 struct mmc_data; 64 struct mmc_request; 65 66 struct mmc_command { 67 uint32_t opcode; 68 uint32_t arg; 69 uint32_t resp[4]; 70 uint32_t flags; /* Expected responses */ 71 #define MMC_RSP_PRESENT (1ul << 0) /* Response */ 72 #define MMC_RSP_136 (1ul << 1) /* 136 bit response */ 73 #define MMC_RSP_CRC (1ul << 2) /* Expect valid crc */ 74 #define MMC_RSP_BUSY (1ul << 3) /* Card may send busy */ 75 #define MMC_RSP_OPCODE (1ul << 4) /* Response include opcode */ 76 #define MMC_RSP_MASK 0x1ful 77 #define MMC_CMD_AC (0ul << 5) /* Addressed Command, no data */ 78 #define MMC_CMD_ADTC (1ul << 5) /* Addressed Data transfer cmd */ 79 #define MMC_CMD_BC (2ul << 5) /* Broadcast command, no response */ 80 #define MMC_CMD_BCR (3ul << 5) /* Broadcast command with response */ 81 #define MMC_CMD_MASK (3ul << 5) 82 83 /* Possible response types defined in the standard: */ 84 #define MMC_RSP_NONE (0) 85 #define MMC_RSP_R1 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) 86 #define MMC_RSP_R1B (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | MMC_RSP_BUSY) 87 #define MMC_RSP_R2 (MMC_RSP_PRESENT | MMC_RSP_136 | MMC_RSP_CRC) 88 #define MMC_RSP_R3 (MMC_RSP_PRESENT) 89 #define MMC_RSP_R4 (MMC_RSP_PRESENT) 90 #define MMC_RSP_R5 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) 91 #define MMC_RSP_R5B (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | MMC_RSP_BUSY) 92 #define MMC_RSP_R6 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) 93 #define MMC_RSP_R7 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) 94 #define MMC_RSP(x) ((x) & MMC_RSP_MASK) 95 uint32_t retries; 96 uint32_t error; 97 #define MMC_ERR_NONE 0 98 #define MMC_ERR_TIMEOUT 1 99 #define MMC_ERR_BADCRC 2 100 #define MMC_ERR_FIFO 3 101 #define MMC_ERR_FAILED 4 102 #define MMC_ERR_INVALID 5 103 #define MMC_ERR_NO_MEMORY 6 104 #define MMC_ERR_MAX 6 105 struct mmc_data *data; /* Data segment with cmd */ 106 struct mmc_request *mrq; /* backpointer to request */ 107 }; 108 109 /* 110 * R1 responses 111 * 112 * Types (per SD 2.0 standard) 113 * e : error bit 114 * s : status bit 115 * r : detected and set for the actual command response 116 * x : Detected and set during command execution. The host can get 117 * the status by issuing a command with R1 response. 118 * 119 * Clear Condition (per SD 2.0 standard) 120 * a : according to the card current state. 121 * b : always related to the previous command. reception of a valid 122 * command will clear it (with a delay of one command). 123 * c : clear by read 124 */ 125 #define R1_OUT_OF_RANGE (1u << 31) /* erx, c */ 126 #define R1_ADDRESS_ERROR (1u << 30) /* erx, c */ 127 #define R1_BLOCK_LEN_ERROR (1u << 29) /* erx, c */ 128 #define R1_ERASE_SEQ_ERROR (1u << 28) /* er, c */ 129 #define R1_ERASE_PARAM (1u << 27) /* erx, c */ 130 #define R1_WP_VIOLATION (1u << 26) /* erx, c */ 131 #define R1_CARD_IS_LOCKED (1u << 25) /* sx, a */ 132 #define R1_LOCK_UNLOCK_FAILED (1u << 24) /* erx, c */ 133 #define R1_COM_CRC_ERROR (1u << 23) /* er, b */ 134 #define R1_ILLEGAL_COMMAND (1u << 22) /* er, b */ 135 #define R1_CARD_ECC_FAILED (1u << 21) /* erx, c */ 136 #define R1_CC_ERROR (1u << 20) /* erx, c */ 137 #define R1_ERROR (1u << 19) /* erx, c */ 138 #define R1_CSD_OVERWRITE (1u << 16) /* erx, c */ 139 #define R1_WP_ERASE_SKIP (1u << 15) /* erx, c */ 140 #define R1_CARD_ECC_DISABLED (1u << 14) /* sx, a */ 141 #define R1_ERASE_RESET (1u << 13) /* sr, c */ 142 #define R1_CURRENT_STATE_MASK (0xfu << 9) /* sx, b */ 143 #define R1_READY_FOR_DATA (1u << 8) /* sx, a */ 144 #define R1_SWITCH_ERROR (1u << 7) /* sx, c */ 145 #define R1_APP_CMD (1u << 5) /* sr, c */ 146 #define R1_AKE_SEQ_ERROR (1u << 3) /* er, c */ 147 #define R1_STATUS(x) ((x) & 0xFFFFE000) 148 #define R1_CURRENT_STATE(x) (((x) & R1_CURRENT_STATE_MASK) >> 9) 149 #define R1_STATE_IDLE 0 150 #define R1_STATE_READY 1 151 #define R1_STATE_IDENT 2 152 #define R1_STATE_STBY 3 153 #define R1_STATE_TRAN 4 154 #define R1_STATE_DATA 5 155 #define R1_STATE_RCV 6 156 #define R1_STATE_PRG 7 157 #define R1_STATE_DIS 8 158 159 struct mmc_data { 160 size_t len; /* size of the data */ 161 size_t xfer_len; 162 void *data; /* data buffer */ 163 uint32_t flags; 164 #define MMC_DATA_WRITE (1UL << 0) 165 #define MMC_DATA_READ (1UL << 1) 166 #define MMC_DATA_STREAM (1UL << 2) 167 #define MMC_DATA_MULTI (1UL << 3) 168 struct mmc_request *mrq; 169 }; 170 171 struct mmc_request { 172 struct mmc_command *cmd; 173 struct mmc_command *stop; 174 void (*done)(struct mmc_request *); /* Completion function */ 175 void *done_data; /* requestor set data */ 176 uint32_t flags; 177 #define MMC_REQ_DONE 1 178 #define MMC_TUNE_DONE 2 179 }; 180 181 /* Command definitions */ 182 183 /* Class 0 and 1: Basic commands & read stream commands */ 184 #define MMC_GO_IDLE_STATE 0 185 #define MMC_SEND_OP_COND 1 186 #define MMC_ALL_SEND_CID 2 187 #define MMC_SET_RELATIVE_ADDR 3 188 #define SD_SEND_RELATIVE_ADDR 3 189 #define MMC_SET_DSR 4 190 #define MMC_SLEEP_AWAKE 5 191 #define MMC_SWITCH_FUNC 6 192 #define MMC_SWITCH_FUNC_CMDS 0 193 #define MMC_SWITCH_FUNC_SET 1 194 #define MMC_SWITCH_FUNC_CLR 2 195 #define MMC_SWITCH_FUNC_WR 3 196 #define MMC_SELECT_CARD 7 197 #define MMC_DESELECT_CARD 7 198 #define MMC_SEND_EXT_CSD 8 199 #define SD_SEND_IF_COND 8 200 #define MMC_SEND_CSD 9 201 #define MMC_SEND_CID 10 202 #define MMC_READ_DAT_UNTIL_STOP 11 203 #define MMC_STOP_TRANSMISSION 12 204 #define MMC_SEND_STATUS 13 205 #define MMC_BUSTEST_R 14 206 #define MMC_GO_INACTIVE_STATE 15 207 #define MMC_BUSTEST_W 19 208 209 /* Class 2: Block oriented read commands */ 210 #define MMC_SET_BLOCKLEN 16 211 #define MMC_READ_SINGLE_BLOCK 17 212 #define MMC_READ_MULTIPLE_BLOCK 18 213 #define MMC_SEND_TUNING_BLOCK 19 214 #define MMC_SEND_TUNING_BLOCK_HS200 21 215 216 /* Class 3: Stream write commands */ 217 #define MMC_WRITE_DAT_UNTIL_STOP 20 218 /* reserved: 22 */ 219 220 /* Class 4: Block oriented write commands */ 221 #define MMC_SET_BLOCK_COUNT 23 222 #define MMC_WRITE_BLOCK 24 223 #define MMC_WRITE_MULTIPLE_BLOCK 25 224 #define MMC_PROGARM_CID 26 225 #define MMC_PROGRAM_CSD 27 226 227 /* Class 6: Block oriented write protection commands */ 228 #define MMC_SET_WRITE_PROT 28 229 #define MMC_CLR_WRITE_PROT 29 230 #define MMC_SEND_WRITE_PROT 30 231 /* reserved: 31 */ 232 233 /* Class 5: Erase commands */ 234 #define SD_ERASE_WR_BLK_START 32 235 #define SD_ERASE_WR_BLK_END 33 236 /* 34 -- reserved old command */ 237 #define MMC_ERASE_GROUP_START 35 238 #define MMC_ERASE_GROUP_END 36 239 /* 37 -- reserved old command */ 240 #define MMC_ERASE 38 241 #define MMC_ERASE_ERASE 0x00000000 242 #define MMC_ERASE_TRIM 0x00000001 243 #define MMC_ERASE_FULE 0x00000002 244 #define MMC_ERASE_DISCARD 0x00000003 245 #define MMC_ERASE_SECURE_ERASE 0x80000000 246 #define MMC_ERASE_SECURE_TRIM1 0x80000001 247 #define MMC_ERASE_SECURE_TRIM2 0x80008000 248 249 /* Class 9: I/O mode commands */ 250 #define MMC_FAST_IO 39 251 #define MMC_GO_IRQ_STATE 40 252 /* reserved: 41 */ 253 254 /* Class 7: Lock card */ 255 #define MMC_LOCK_UNLOCK 42 256 /* reserved: 43 */ 257 /* reserved: 44 */ 258 /* reserved: 45 */ 259 /* reserved: 46 */ 260 /* reserved: 47 */ 261 /* reserved: 48 */ 262 /* reserved: 49 */ 263 /* reserved: 50 */ 264 /* reserved: 51 */ 265 /* reserved: 54 */ 266 267 /* Class 8: Application specific commands */ 268 #define MMC_APP_CMD 55 269 #define MMC_GEN_CMD 56 270 /* reserved: 57 */ 271 /* reserved: 58 */ 272 /* reserved: 59 */ 273 /* reserved for mfg: 60 */ 274 /* reserved for mfg: 61 */ 275 /* reserved for mfg: 62 */ 276 /* reserved for mfg: 63 */ 277 278 /* Class 9: I/O cards (sd) */ 279 #define SD_IO_RW_DIRECT 52 280 #define SD_IO_RW_EXTENDED 53 281 282 /* Class 10: Switch function commands */ 283 #define SD_SWITCH_FUNC 6 284 /* reserved: 34 */ 285 /* reserved: 35 */ 286 /* reserved: 36 */ 287 /* reserved: 37 */ 288 /* reserved: 50 */ 289 /* reserved: 57 */ 290 291 /* Application specific commands for SD */ 292 #define ACMD_SET_BUS_WIDTH 6 293 #define ACMD_SD_STATUS 13 294 #define ACMD_SEND_NUM_WR_BLOCKS 22 295 #define ACMD_SET_WR_BLK_ERASE_COUNT 23 296 #define ACMD_SD_SEND_OP_COND 41 297 #define ACMD_SET_CLR_CARD_DETECT 42 298 #define ACMD_SEND_SCR 51 299 300 /* 301 * EXT_CSD fields 302 */ 303 #define EXT_CSD_FLUSH_CACHE 32 /* W/E */ 304 #define EXT_CSD_CACHE_CTRL 33 /* R/W/E */ 305 #define EXT_CSD_EXT_PART_ATTR 52 /* R/W, 2 bytes */ 306 #define EXT_CSD_ENH_START_ADDR 136 /* R/W, 4 bytes */ 307 #define EXT_CSD_ENH_SIZE_MULT 140 /* R/W, 3 bytes */ 308 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W, 12 bytes */ 309 #define EXT_CSD_PART_SET 155 /* R/W */ 310 #define EXT_CSD_PART_ATTR 156 /* R/W */ 311 #define EXT_CSD_PART_SUPPORT 160 /* RO */ 312 #define EXT_CSD_RPMB_MULT 168 /* RO */ 313 #define EXT_CSD_BOOT_WP_STATUS 174 /* RO */ 314 #define EXT_CSD_ERASE_GRP_DEF 175 /* R/W */ 315 #define EXT_CSD_PART_CONFIG 179 /* R/W */ 316 #define EXT_CSD_BUS_WIDTH 183 /* R/W */ 317 #define EXT_CSD_STROBE_SUPPORT 184 /* RO */ 318 #define EXT_CSD_HS_TIMING 185 /* R/W */ 319 #define EXT_CSD_POWER_CLASS 187 /* R/W */ 320 #define EXT_CSD_CARD_TYPE 196 /* RO */ 321 #define EXT_CSD_DRIVER_STRENGTH 197 /* RO */ 322 #define EXT_CSD_REV 192 /* RO */ 323 #define EXT_CSD_PART_SWITCH_TO 199 /* RO */ 324 #define EXT_CSD_PWR_CL_52_195 200 /* RO */ 325 #define EXT_CSD_PWR_CL_26_195 201 /* RO */ 326 #define EXT_CSD_PWR_CL_52_360 202 /* RO */ 327 #define EXT_CSD_PWR_CL_26_360 203 /* RO */ 328 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 329 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 330 #define EXT_CSD_ERASE_TO_MULT 223 /* RO */ 331 #define EXT_CSD_ERASE_GRP_SIZE 224 /* RO */ 332 #define EXT_CSD_BOOT_SIZE_MULT 226 /* RO */ 333 #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ 334 #define EXT_CSD_PWR_CL_200_195 236 /* RO */ 335 #define EXT_CSD_PWR_CL_200_360 237 /* RO */ 336 #define EXT_CSD_PWR_CL_52_195_DDR 238 /* RO */ 337 #define EXT_CSD_PWR_CL_52_360_DDR 239 /* RO */ 338 #define EXT_CSD_CACHE_FLUSH_POLICY 249 /* RO */ 339 #define EXT_CSD_GEN_CMD6_TIME 248 /* RO */ 340 #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ 341 #define EXT_CSD_PWR_CL_200_360_DDR 253 /* RO */ 342 343 /* 344 * EXT_CSD field definitions 345 */ 346 #define EXT_CSD_FLUSH_CACHE_FLUSH 0x01 347 #define EXT_CSD_FLUSH_CACHE_BARRIER 0x02 348 349 #define EXT_CSD_CACHE_CTRL_CACHE_EN 0x01 350 351 #define EXT_CSD_EXT_PART_ATTR_DEFAULT 0x0 352 #define EXT_CSD_EXT_PART_ATTR_SYSTEMCODE 0x1 353 #define EXT_CSD_EXT_PART_ATTR_NPERSISTENT 0x2 354 355 #define EXT_CSD_PART_SET_COMPLETED 0x01 356 357 #define EXT_CSD_PART_ATTR_ENH_USR 0x01 358 #define EXT_CSD_PART_ATTR_ENH_GP0 0x02 359 #define EXT_CSD_PART_ATTR_ENH_GP1 0x04 360 #define EXT_CSD_PART_ATTR_ENH_GP2 0x08 361 #define EXT_CSD_PART_ATTR_ENH_GP3 0x10 362 #define EXT_CSD_PART_ATTR_ENH_MASK 0x1f 363 364 #define EXT_CSD_PART_SUPPORT_EN 0x01 365 #define EXT_CSD_PART_SUPPORT_ENH_ATTR_EN 0x02 366 #define EXT_CSD_PART_SUPPORT_EXT_ATTR_EN 0x04 367 368 #define EXT_CSD_BOOT_WP_STATUS_BOOT0_PWR 0x01 369 #define EXT_CSD_BOOT_WP_STATUS_BOOT0_PERM 0x02 370 #define EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK 0x03 371 #define EXT_CSD_BOOT_WP_STATUS_BOOT1_PWR 0x04 372 #define EXT_CSD_BOOT_WP_STATUS_BOOT1_PERM 0x08 373 #define EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK 0x0c 374 375 #define EXT_CSD_ERASE_GRP_DEF_EN 0x01 376 377 #define EXT_CSD_PART_CONFIG_ACC_DEFAULT 0x00 378 #define EXT_CSD_PART_CONFIG_ACC_BOOT0 0x01 379 #define EXT_CSD_PART_CONFIG_ACC_BOOT1 0x02 380 #define EXT_CSD_PART_CONFIG_ACC_RPMB 0x03 381 #define EXT_CSD_PART_CONFIG_ACC_GP0 0x04 382 #define EXT_CSD_PART_CONFIG_ACC_GP1 0x05 383 #define EXT_CSD_PART_CONFIG_ACC_GP2 0x06 384 #define EXT_CSD_PART_CONFIG_ACC_GP3 0x07 385 #define EXT_CSD_PART_CONFIG_ACC_MASK 0x07 386 #define EXT_CSD_PART_CONFIG_BOOT0 0x08 387 #define EXT_CSD_PART_CONFIG_BOOT1 0x10 388 #define EXT_CSD_PART_CONFIG_BOOT_USR 0x38 389 #define EXT_CSD_PART_CONFIG_BOOT_MASK 0x38 390 #define EXT_CSD_PART_CONFIG_BOOT_ACK 0x40 391 392 #define EXT_CSD_CMD_SET_NORMAL 1 393 #define EXT_CSD_CMD_SET_SECURE 2 394 #define EXT_CSD_CMD_SET_CPSECURE 4 395 396 #define EXT_CSD_HS_TIMING_BC 0 397 #define EXT_CSD_HS_TIMING_HS 1 398 #define EXT_CSD_HS_TIMING_HS200 2 399 #define EXT_CSD_HS_TIMING_HS400 3 400 #define EXT_CSD_HS_TIMING_DRV_STR_SHIFT 4 401 402 #define EXT_CSD_POWER_CLASS_8BIT_MASK 0xf0 403 #define EXT_CSD_POWER_CLASS_8BIT_SHIFT 4 404 #define EXT_CSD_POWER_CLASS_4BIT_MASK 0x0f 405 #define EXT_CSD_POWER_CLASS_4BIT_SHIFT 0 406 407 #define EXT_CSD_CARD_TYPE_HS_26 0x0001 408 #define EXT_CSD_CARD_TYPE_HS_52 0x0002 409 #define EXT_CSD_CARD_TYPE_DDR_52_1_8V 0x0004 410 #define EXT_CSD_CARD_TYPE_DDR_52_1_2V 0x0008 411 #define EXT_CSD_CARD_TYPE_HS200_1_8V 0x0010 412 #define EXT_CSD_CARD_TYPE_HS200_1_2V 0x0020 413 #define EXT_CSD_CARD_TYPE_HS400_1_8V 0x0040 414 #define EXT_CSD_CARD_TYPE_HS400_1_2V 0x0080 415 416 #define EXT_CSD_BUS_WIDTH_1 0 417 #define EXT_CSD_BUS_WIDTH_4 1 418 #define EXT_CSD_BUS_WIDTH_8 2 419 #define EXT_CSD_BUS_WIDTH_4_DDR 5 420 #define EXT_CSD_BUS_WIDTH_8_DDR 6 421 #define EXT_CSD_BUS_WIDTH_ES 0x80 422 423 #define EXT_CSD_STROBE_SUPPORT_EN 0x01 424 425 #define EXT_CSD_SEC_FEATURE_SUPPORT_ER_EN 0x01 426 #define EXT_CSD_SEC_FEATURE_SUPPORT_BD_BLK_EN 0x04 427 #define EXT_CSD_SEC_FEATURE_SUPPORT_GB_CL_EN 0x10 428 #define EXT_CSD_SEC_FEATURE_SUPPORT_SANITIZE 0x40 429 430 #define EXT_CSD_CACHE_FLUSH_POLICY_FIFO 0x01 431 432 /* 433 * Vendor specific EXT_CSD fields 434 */ 435 /* SanDisk iNAND */ 436 #define EXT_CSD_INAND_CMD38 113 437 #define EXT_CSD_INAND_CMD38_ERASE 0x00 438 #define EXT_CSD_INAND_CMD38_TRIM 0x01 439 #define EXT_CSD_INAND_CMD38_SECURE_ERASE 0x80 440 #define EXT_CSD_INAND_CMD38_SECURE_TRIM1 0x81 441 #define EXT_CSD_INAND_CMD38_SECURE_TRIM2 0x82 442 443 #define MMC_TYPE_HS_26_MAX 26000000 444 #define MMC_TYPE_HS_52_MAX 52000000 445 #define MMC_TYPE_DDR52_MAX 52000000 446 #define MMC_TYPE_HS200_HS400ES_MAX 200000000 447 448 /* 449 * SD bus widths 450 */ 451 #define SD_BUS_WIDTH_1 0 452 #define SD_BUS_WIDTH_4 2 453 454 /* 455 * SD Switch 456 */ 457 #define SD_SWITCH_MODE_CHECK 0 458 #define SD_SWITCH_MODE_SET 1 459 #define SD_SWITCH_GROUP1 0 460 #define SD_SWITCH_NORMAL_MODE 0 461 #define SD_SWITCH_HS_MODE 1 462 #define SD_SWITCH_SDR50_MODE 2 463 #define SD_SWITCH_SDR104_MODE 3 464 #define SD_SWITCH_DDR50 4 465 #define SD_SWITCH_NOCHANGE 0xF 466 467 #define SD_CLR_CARD_DETECT 0 468 #define SD_SET_CARD_DETECT 1 469 470 #define SD_HS_MAX 50000000 471 #define SD_DDR50_MAX 50000000 472 #define SD_SDR12_MAX 25000000 473 #define SD_SDR25_MAX 50000000 474 #define SD_SDR50_MAX 100000000 475 #define SD_SDR104_MAX 208000000 476 477 /* Specifications require 400 kHz max. during ID phase. */ 478 #define SD_MMC_CARD_ID_FREQUENCY 400000 479 480 /* OCR bits */ 481 482 /* 483 * in SD 2.0 spec, bits 8-14 are now marked reserved 484 * Low voltage in SD2.0 spec is bit 7, TBD voltage 485 * Low voltage in MC 3.31 spec is bit 7, 1.65-1.95V 486 * Specs prior to MMC 3.31 defined bits 0-7 as voltages down to 1.5V. 487 * 3.31 redefined them to be reserved and also said that cards had to 488 * support the 2.7-3.6V and fixed the OCR to be 0xfff8000 for high voltage 489 * cards. MMC 4.0 says that a dual voltage card responds with 0xfff8080. 490 * Looks like the fine-grained control of the voltage tolerance ranges 491 * was abandoned. 492 * 493 * The MMC_OCR_CCS appears to be valid for only SD cards. 494 */ 495 #define MMC_OCR_VOLTAGE 0x3fffffffU /* Vdd Voltage mask */ 496 #define MMC_OCR_LOW_VOLTAGE (1u << 7) /* Low Voltage Range -- tbd */ 497 #define MMC_OCR_MIN_VOLTAGE_SHIFT 7 498 #define MMC_OCR_200_210 (1U << 8) /* Vdd voltage 2.00 ~ 2.10 */ 499 #define MMC_OCR_210_220 (1U << 9) /* Vdd voltage 2.10 ~ 2.20 */ 500 #define MMC_OCR_220_230 (1U << 10) /* Vdd voltage 2.20 ~ 2.30 */ 501 #define MMC_OCR_230_240 (1U << 11) /* Vdd voltage 2.30 ~ 2.40 */ 502 #define MMC_OCR_240_250 (1U << 12) /* Vdd voltage 2.40 ~ 2.50 */ 503 #define MMC_OCR_250_260 (1U << 13) /* Vdd voltage 2.50 ~ 2.60 */ 504 #define MMC_OCR_260_270 (1U << 14) /* Vdd voltage 2.60 ~ 2.70 */ 505 #define MMC_OCR_270_280 (1U << 15) /* Vdd voltage 2.70 ~ 2.80 */ 506 #define MMC_OCR_280_290 (1U << 16) /* Vdd voltage 2.80 ~ 2.90 */ 507 #define MMC_OCR_290_300 (1U << 17) /* Vdd voltage 2.90 ~ 3.00 */ 508 #define MMC_OCR_300_310 (1U << 18) /* Vdd voltage 3.00 ~ 3.10 */ 509 #define MMC_OCR_310_320 (1U << 19) /* Vdd voltage 3.10 ~ 3.20 */ 510 #define MMC_OCR_320_330 (1U << 20) /* Vdd voltage 3.20 ~ 3.30 */ 511 #define MMC_OCR_330_340 (1U << 21) /* Vdd voltage 3.30 ~ 3.40 */ 512 #define MMC_OCR_340_350 (1U << 22) /* Vdd voltage 3.40 ~ 3.50 */ 513 #define MMC_OCR_350_360 (1U << 23) /* Vdd voltage 3.50 ~ 3.60 */ 514 #define MMC_OCR_MAX_VOLTAGE_SHIFT 23 515 #define MMC_OCR_S18R (1U << 24) /* Switching to 1.8 V requested (SD) */ 516 #define MMC_OCR_S18A MMC_OCR_S18R /* Switching to 1.8 V accepted (SD) */ 517 #define MMC_OCR_XPC (1U << 28) /* SDXC Power Control */ 518 #define MMC_OCR_ACCESS_MODE_BYTE (0U << 29) /* Access Mode Byte (MMC) */ 519 #define MMC_OCR_ACCESS_MODE_SECT (1U << 29) /* Access Mode Sector (MMC) */ 520 #define MMC_OCR_ACCESS_MODE_MASK (3U << 29) 521 #define MMC_OCR_CCS (1u << 30) /* Card Capacity status (SD vs SDHC) */ 522 #define MMC_OCR_CARD_BUSY (1U << 31) /* Card Power up status */ 523 524 /* CSD -- decoded structure */ 525 struct mmc_cid { 526 uint32_t mid; 527 char pnm[8]; 528 uint32_t psn; 529 uint16_t oid; 530 uint16_t mdt_year; 531 uint8_t mdt_month; 532 uint8_t prv; 533 uint8_t fwrev; 534 }; 535 536 struct mmc_csd { 537 uint8_t csd_structure; 538 uint8_t spec_vers; 539 uint16_t ccc; 540 uint16_t tacc; 541 uint32_t nsac; 542 uint32_t r2w_factor; 543 uint32_t tran_speed; 544 uint32_t read_bl_len; 545 uint32_t write_bl_len; 546 uint32_t vdd_r_curr_min; 547 uint32_t vdd_r_curr_max; 548 uint32_t vdd_w_curr_min; 549 uint32_t vdd_w_curr_max; 550 uint32_t wp_grp_size; 551 uint32_t erase_sector; 552 uint64_t capacity; 553 unsigned int read_bl_partial:1, 554 read_blk_misalign:1, 555 write_bl_partial:1, 556 write_blk_misalign:1, 557 dsr_imp:1, 558 erase_blk_en:1, 559 wp_grp_enable:1; 560 }; 561 562 struct mmc_scr { 563 unsigned char sda_vsn; 564 unsigned char bus_widths; 565 #define SD_SCR_BUS_WIDTH_1 (1 << 0) 566 #define SD_SCR_BUS_WIDTH_4 (1 << 2) 567 }; 568 569 struct mmc_sd_status { 570 uint8_t bus_width; 571 uint8_t secured_mode; 572 uint16_t card_type; 573 uint16_t prot_area; 574 uint8_t speed_class; 575 uint8_t perf_move; 576 uint8_t au_size; 577 uint16_t erase_size; 578 uint8_t erase_timeout; 579 uint8_t erase_offset; 580 }; 581 582 struct mmc_quirk { 583 uint32_t mid; 584 #define MMC_QUIRK_MID_ANY ((uint32_t)-1) 585 uint16_t oid; 586 #define MMC_QUIRK_OID_ANY ((uint16_t)-1) 587 const char *pnm; 588 uint32_t quirks; 589 #define MMC_QUIRK_INAND_CMD38 0x0001 590 #define MMC_QUIRK_BROKEN_TRIM 0x0002 591 }; 592 593 #define MMC_QUIRKS_FMT "\020" "\001INAND_CMD38" "\002BROKEN_TRIM" 594 595 /* 596 * Various MMC/SD constants 597 */ 598 #define MMC_BOOT_RPMB_BLOCK_SIZE (128 * 1024) 599 600 #define MMC_EXTCSD_SIZE 512 601 602 #define MMC_PART_GP_MAX 4 603 #define MMC_PART_MAX 8 604 605 #define MMC_TUNING_MAX 64 /* Maximum tuning iterations */ 606 #define MMC_TUNING_LEN 64 /* Size of tuning data */ 607 #define MMC_TUNING_LEN_HS200 128 /* Size of tuning data in HS200 mode */ 608 609 /* 610 * Older versions of the MMC standard had a variable sector size. However, 611 * I've been able to find no old MMC or SD cards that have a non 512 612 * byte sector size anywhere, so we assume that such cards are very rare 613 * and only note their existance in passing here... 614 */ 615 #define MMC_SECTOR_SIZE 512 616 617 #endif /* DEV_MMCREG_H */ 618