1 /* $NetBSD: ip_mroute.h,v 1.35 2021/02/03 18:13:13 roy Exp $ */ 2 3 #ifndef _NETINET_IP_MROUTE_H_ 4 #define _NETINET_IP_MROUTE_H_ 5 6 /* 7 * Definitions for IP multicast forwarding. 8 * 9 * Written by David Waitzman, BBN Labs, August 1988. 10 * Modified by Steve Deering, Stanford, February 1989. 11 * Modified by Ajit Thyagarajan, PARC, August 1993. 12 * Modified by Ajit Thyagarajan, PARC, August 1994. 13 * Modified by Ahmed Helmy, SGI, June 1996. 14 * Modified by Pavlin Radoslavov, ICSI, October 2002. 15 * 16 * MROUTING Revision: 1.2 17 * and PIM-SMv2 and PIM-DM support, advanced API support, 18 * bandwidth metering and signaling. 19 */ 20 21 #include <sys/queue.h> 22 #include <sys/callout.h> 23 24 #ifdef _KERNEL 25 struct sockopt; /* from <sys/socketvar.h> */ 26 #endif 27 28 /* 29 * Multicast Routing set/getsockopt commands. 30 */ 31 #define MRT_INIT 100 /* initialize forwarder */ 32 #define MRT_DONE 101 /* shut down forwarder */ 33 #define MRT_ADD_VIF 102 /* create virtual interface */ 34 #define MRT_DEL_VIF 103 /* delete virtual interface */ 35 #define MRT_ADD_MFC 104 /* insert forwarding cache entry */ 36 #define MRT_DEL_MFC 105 /* delete forwarding cache entry */ 37 #define MRT_VERSION 106 /* get kernel version number */ 38 #define MRT_ASSERT 107 /* enable assert processing */ 39 #define MRT_PIM MRT_ASSERT /* enable PIM processing */ 40 #define MRT_API_SUPPORT 109 /* supported MRT API */ 41 #define MRT_API_CONFIG 110 /* config MRT API */ 42 #define MRT_ADD_BW_UPCALL 111 /* create bandwidth monitor */ 43 #define MRT_DEL_BW_UPCALL 112 /* delete bandwidth monitor */ 44 45 46 /* 47 * Types and macros for handling bitmaps with one bit per virtual interface. 48 */ 49 #define MAXVIFS 32 50 typedef u_int32_t vifbitmap_t; 51 typedef u_int16_t vifi_t; /* type of a vif index */ 52 53 #define VIFM_SET(n, m) ((m) |= (1 << (n))) 54 #define VIFM_CLR(n, m) ((m) &= ~(1 << (n))) 55 #define VIFM_ISSET(n, m) ((m) & (1 << (n))) 56 #define VIFM_SETALL(m) ((m) = 0xffffffff) 57 #define VIFM_CLRALL(m) ((m) = 0x00000000) 58 #define VIFM_COPY(mfrom, mto) ((mto) = (mfrom)) 59 #define VIFM_SAME(m1, m2) ((m1) == (m2)) 60 61 #define VIFF_TUNNEL 0x1 /* vif represents a tunnel end-point */ 62 #define VIFF_SRCRT 0x2 /* tunnel uses IP src routing */ 63 #define VIFF_REGISTER 0x4 /* used for PIM Register encap/decap */ 64 65 /* 66 * Argument structure for MRT_ADD_VIF. 67 * (MRT_DEL_VIF takes a single vifi_t argument.) 68 */ 69 struct vifctl { 70 vifi_t vifc_vifi; /* the index of the vif to be added */ 71 u_int8_t vifc_flags; /* VIFF_ flags defined below */ 72 u_int8_t vifc_threshold; /* min ttl required to forward on vif */ 73 u_int32_t vifc_rate_limit; /* max rate */ 74 struct in_addr vifc_lcl_addr;/* local interface address */ 75 struct in_addr vifc_rmt_addr;/* remote address (tunnels only) */ 76 }; 77 78 /* 79 * Argument structure for MRT_ADD_MFC and MRT_DEL_MFC. 80 * XXX if you change this, make sure to change struct mfcctl2 as well. 81 */ 82 struct mfcctl { 83 struct in_addr mfcc_origin; /* ip origin of mcasts */ 84 struct in_addr mfcc_mcastgrp; /* multicast group associated */ 85 vifi_t mfcc_parent; /* incoming vif */ 86 u_int8_t mfcc_ttls[MAXVIFS]; /* forwarding ttls on vifs */ 87 }; 88 89 /* 90 * The new argument structure for MRT_ADD_MFC and MRT_DEL_MFC overlays 91 * and extends the old struct mfcctl. 92 */ 93 struct mfcctl2 { 94 /* the mfcctl fields */ 95 struct in_addr mfcc_origin; /* ip origin of mcasts */ 96 struct in_addr mfcc_mcastgrp; /* multicast group associated*/ 97 vifi_t mfcc_parent; /* incoming vif */ 98 u_int8_t mfcc_ttls[MAXVIFS]; /* forwarding ttls on vifs */ 99 100 /* extension fields */ 101 u_int8_t mfcc_flags[MAXVIFS]; /* the MRT_MFC_FLAGS_* flags */ 102 struct in_addr mfcc_rp; /* the RP address */ 103 }; 104 /* 105 * The advanced-API flags. 106 * 107 * The MRT_MFC_FLAGS_XXX API flags are also used as flags 108 * for the mfcc_flags field. 109 */ 110 #define MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 << 0) /* disable WRONGVIF signals */ 111 #define MRT_MFC_FLAGS_BORDER_VIF (1 << 1) /* border vif */ 112 #define MRT_MFC_RP (1 << 8) /* enable RP address */ 113 #define MRT_MFC_BW_UPCALL (1 << 9) /* enable bw upcalls */ 114 #define MRT_MFC_FLAGS_ALL (MRT_MFC_FLAGS_DISABLE_WRONGVIF | \ 115 MRT_MFC_FLAGS_BORDER_VIF) 116 #define MRT_API_FLAGS_ALL (MRT_MFC_FLAGS_ALL | \ 117 MRT_MFC_RP | \ 118 MRT_MFC_BW_UPCALL) 119 120 /* 121 * Structure for installing or delivering an upcall if the 122 * measured bandwidth is above or below a threshold. 123 * 124 * User programs (e.g. daemons) may have a need to know when the 125 * bandwidth used by some data flow is above or below some threshold. 126 * This interface allows the userland to specify the threshold (in 127 * bytes and/or packets) and the measurement interval. Flows are 128 * all packet with the same source and destination IP address. 129 * At the moment the code is only used for multicast destinations 130 * but there is nothing that prevents its use for unicast. 131 * 132 * The measurement interval cannot be shorter than some Tmin (currently, 3s). 133 * The threshold is set in packets and/or bytes per_interval. 134 * 135 * Measurement works as follows: 136 * 137 * For >= measurements: 138 * The first packet marks the start of a measurement interval. 139 * During an interval we count packets and bytes, and when we 140 * pass the threshold we deliver an upcall and we are done. 141 * The first packet after the end of the interval resets the 142 * count and restarts the measurement. 143 * 144 * For <= measurement: 145 * We start a timer to fire at the end of the interval, and 146 * then for each incoming packet we count packets and bytes. 147 * When the timer fires, we compare the value with the threshold, 148 * schedule an upcall if we are below, and restart the measurement 149 * (reschedule timer and zero counters). 150 */ 151 152 struct bw_data { 153 struct timeval b_time; 154 u_int64_t b_packets; 155 u_int64_t b_bytes; 156 }; 157 158 struct bw_upcall { 159 struct in_addr bu_src; /* source address */ 160 struct in_addr bu_dst; /* destination address */ 161 u_int32_t bu_flags; /* misc flags (see below) */ 162 #define BW_UPCALL_UNIT_PACKETS (1 << 0) /* threshold (in packets) */ 163 #define BW_UPCALL_UNIT_BYTES (1 << 1) /* threshold (in bytes) */ 164 #define BW_UPCALL_GEQ (1 << 2) /* upcall if bw >= threshold */ 165 #define BW_UPCALL_LEQ (1 << 3) /* upcall if bw <= threshold */ 166 #define BW_UPCALL_DELETE_ALL (1 << 4) /* delete all upcalls for s,d*/ 167 struct bw_data bu_threshold; /* the bw threshold */ 168 struct bw_data bu_measured; /* the measured bw */ 169 }; 170 171 /* max. number of upcalls to deliver together */ 172 #define BW_UPCALLS_MAX 128 173 /* min. threshold time interval for bandwidth measurement */ 174 #define BW_UPCALL_THRESHOLD_INTERVAL_MIN_SEC 3 175 #define BW_UPCALL_THRESHOLD_INTERVAL_MIN_USEC 0 176 177 /* 178 * Argument structure used by mrouted to get src-grp pkt counts. 179 */ 180 struct sioc_sg_req { 181 struct in_addr src; 182 struct in_addr grp; 183 u_long pktcnt; 184 u_long bytecnt; 185 u_long wrong_if; 186 }; 187 188 /* 189 * Argument structure used by mrouted to get vif pkt counts. 190 */ 191 struct sioc_vif_req { 192 vifi_t vifi; /* vif number */ 193 u_long icount; /* input packet count on vif */ 194 u_long ocount; /* output packet count on vif */ 195 u_long ibytes; /* input byte count on vif */ 196 u_long obytes; /* output byte count on vif */ 197 }; 198 199 200 /* 201 * The kernel's multicast routing statistics. 202 */ 203 struct mrtstat { 204 u_long mrts_mfc_lookups; /* # forw. cache hash table hits */ 205 u_long mrts_mfc_misses; /* # forw. cache hash table misses */ 206 u_long mrts_upcalls; /* # calls to mrouted */ 207 u_long mrts_no_route; /* no route for packet's origin */ 208 u_long mrts_bad_tunnel; /* malformed tunnel options */ 209 u_long mrts_cant_tunnel; /* no room for tunnel options */ 210 u_long mrts_wrong_if; /* arrived on wrong interface */ 211 u_long mrts_upq_ovflw; /* upcall Q overflow */ 212 u_long mrts_cache_cleanups; /* # entries with no upcalls */ 213 u_long mrts_drop_sel; /* pkts dropped selectively */ 214 u_long mrts_q_overflow; /* pkts dropped - Q overflow */ 215 u_long mrts_pkt2large; /* pkts dropped - size > BKT SIZE */ 216 u_long mrts_upq_sockfull; /* upcalls dropped - socket full */ 217 }; 218 219 220 #ifdef _KERNEL 221 222 /* 223 * The kernel's virtual-interface structure. 224 */ 225 struct encaptab; 226 struct vif { 227 struct mbuf *tbf_q, **tbf_t; /* packet queue */ 228 struct timeval tbf_last_pkt_t; /* arr. time of last pkt */ 229 u_int32_t tbf_n_tok; /* no of tokens in bucket */ 230 u_int32_t tbf_q_len; /* length of queue at this vif */ 231 u_int32_t tbf_max_q_len; /* max. queue length */ 232 233 u_int8_t v_flags; /* VIFF_ flags defined above */ 234 u_int8_t v_threshold; /* min ttl required to forward on vif */ 235 u_int32_t v_rate_limit; /* max rate */ 236 struct in_addr v_lcl_addr; /* local interface address */ 237 struct in_addr v_rmt_addr; /* remote address (tunnels only) */ 238 struct ifnet *v_ifp; /* pointer to interface */ 239 u_long v_pkt_in; /* # pkts in on interface */ 240 u_long v_pkt_out; /* # pkts out on interface */ 241 u_long v_bytes_in; /* # bytes in on interface */ 242 u_long v_bytes_out; /* # bytes out on interface */ 243 struct route v_route; /* cached route if this is a tunnel */ 244 callout_t v_repq_ch; /* for tbf_reprocess_q() */ 245 const struct encaptab *v_encap_cookie; 246 }; 247 248 /* 249 * The kernel's multicast forwarding cache entry structure. 250 * (A field for the type of service (mfc_tos) is to be added 251 * at a future point.) 252 */ 253 struct mfc { 254 LIST_ENTRY(mfc) mfc_hash; 255 struct in_addr mfc_origin; /* ip origin of mcasts */ 256 struct in_addr mfc_mcastgrp; /* multicast group associated */ 257 vifi_t mfc_parent; /* incoming vif */ 258 u_int8_t mfc_ttls[MAXVIFS]; /* forwarding ttls on vifs */ 259 u_long mfc_pkt_cnt; /* pkt count for src-grp */ 260 u_long mfc_byte_cnt; /* byte count for src-grp */ 261 u_long mfc_wrong_if; /* wrong if for src-grp */ 262 int mfc_expire; /* time to clean entry up */ 263 struct timeval mfc_last_assert; /* last time I sent an assert */ 264 struct rtdetq *mfc_stall; /* pkts waiting for route */ 265 u_int8_t mfc_flags[MAXVIFS]; /* the MRT_MFC_FLAGS_* flags */ 266 struct in_addr mfc_rp; /* the RP address */ 267 struct bw_meter *mfc_bw_meter; /* list of bandwidth meters */ 268 }; 269 270 /* 271 * Structure used to communicate from kernel to multicast router. 272 * (Note the convenient similarity to an IP packet.) 273 */ 274 struct igmpmsg { 275 u_int32_t unused1; 276 u_int32_t unused2; 277 u_int8_t im_msgtype; /* what type of message */ 278 #define IGMPMSG_NOCACHE 1 /* no MFC in the kernel */ 279 #define IGMPMSG_WRONGVIF 2 /* packet came from wrong interface */ 280 #define IGMPMSG_WHOLEPKT 3 /* PIM pkt for user level encap. */ 281 #define IGMPMSG_BW_UPCALL 4 /* BW monitoring upcall */ 282 u_int8_t im_mbz; /* must be zero */ 283 u_int8_t im_vif; /* vif rec'd on */ 284 u_int8_t unused3; 285 struct in_addr im_src, im_dst; 286 }; 287 #ifdef __CTASSERT 288 __CTASSERT(sizeof(struct igmpmsg) == 20); 289 #endif 290 291 /* 292 * Argument structure used for pkt info. while upcall is made. 293 */ 294 struct rtdetq { 295 struct mbuf *m; /* a copy of the packet */ 296 struct ifnet *ifp; /* interface pkt came in on */ 297 #ifdef UPCALL_TIMING 298 struct timeval t; /* timestamp */ 299 #endif /* UPCALL_TIMING */ 300 struct rtdetq *next; 301 }; 302 303 #define MFCTBLSIZ 256 304 #define MAX_UPQ 4 /* max. no of pkts in upcall Q */ 305 306 /* 307 * Token bucket filter code 308 */ 309 #define MAX_BKT_SIZE 10000 /* 10K bytes size */ 310 #define MAXQSIZE 10 /* max. no of pkts in token queue */ 311 312 /* 313 * Structure for measuring the bandwidth and sending an upcall if the 314 * measured bandwidth is above or below a threshold. 315 */ 316 struct bw_meter { 317 struct bw_meter *bm_mfc_next; /* next bw meter (same mfc) */ 318 struct bw_meter *bm_time_next; /* next bw meter (same time) */ 319 uint32_t bm_time_hash; /* the time hash value */ 320 struct mfc *bm_mfc; /* the corresponding mfc */ 321 uint32_t bm_flags; /* misc flags (see below) */ 322 #define BW_METER_UNIT_PACKETS (1 << 0) /* threshold (in packets) */ 323 #define BW_METER_UNIT_BYTES (1 << 1) /* threshold (in bytes) */ 324 #define BW_METER_GEQ (1 << 2) /* upcall if bw >= threshold */ 325 #define BW_METER_LEQ (1 << 3) /* upcall if bw <= threshold */ 326 #define BW_METER_USER_FLAGS (BW_METER_UNIT_PACKETS | \ 327 BW_METER_UNIT_BYTES | \ 328 BW_METER_GEQ | \ 329 BW_METER_LEQ) 330 331 #define BW_METER_UPCALL_DELIVERED (1 << 24) /* upcall was delivered */ 332 333 struct bw_data bm_threshold; /* the upcall threshold */ 334 struct bw_data bm_measured; /* the measured bw */ 335 struct timeval bm_start_time; /* abs. time */ 336 }; 337 338 int ip_mrouter_set(struct socket *, struct sockopt *); 339 int ip_mrouter_get(struct socket *, struct sockopt *); 340 int mrt_ioctl(struct socket *, u_long, void *); 341 int ip_mrouter_done(void); 342 void ip_mrouter_detach(struct ifnet *); 343 void reset_vif(struct vif *); 344 int ip_mforward(struct mbuf *, struct ifnet *); 345 346 #endif /* _KERNEL */ 347 348 #endif /* !_NETINET_IP_MROUTE_H_ */ 349