1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD$ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24#rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="NO" # Enables display of informational messages at boot. 26rc_startmsgs="YES" # Show "Starting foo:" messages at boot 27rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 28early_late_divider="FILESYSTEMS" # Script that separates early/late 29 # stages of the boot process. Make sure you know 30 # the ramifications if you change this. 31 # See rc.conf(5) for more details. 32always_force_depends="NO" # Set to check that indicated dependencies are 33 # running during boot (can increase boot time). 34 35apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 36apmd_enable="NO" # Run apmd to handle APM event from userland. 37apmd_flags="" # Flags to apmd (if enabled). 38ddb_enable="NO" # Set to YES to load ddb scripts at boot. 39ddb_config="/etc/ddb.conf" # ddb(8) config file. 40devd_enable="NO" # Run devd, to trigger programs on device tree changes. 41devd_flags="" # Additional flags for devd(8). 42#kld_list="" # Kernel modules to load after local disks are mounted 43kldxref_enable="NO" # Build linker.hints files with kldxref(8). 44kldxref_clobber="NO" # Overwrite old linker.hints at boot. 45kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 46powerd_enable="NO" # Run powerd to lower our power usage. 47powerd_flags="" # Flags to powerd (if enabled). 48tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 49tmpsize="20m" # Size of mfs /tmp if created 50tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 51varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 52varsize="32m" # Size of mfs /var if created 53varmfs_flags="-S" # Extra mount options for the mfs /var 54populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 55cleanvar_enable="YES" # Clean the /var directory 56local_startup="/usr/local/etc/rc.d" # startup script dirs. 57script_name_sep=" " # Change if your startup scripts' names contain spaces 58rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 59 60# ZFS support 61zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 62 63gptboot_enable="YES" # GPT boot success/failure reporting. 64 65# Experimental - test before enabling 66gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 67gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 68gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 69gbde_lockdir="/etc" # Where to look for gbde lockfiles 70 71# GELI disk encryption configuration. 72geli_devices="" # List of devices to automatically attach in addition to 73 # GELI devices listed in /etc/fstab. 74geli_tries="" # Number of times to attempt attaching geli device. 75 # If empty, kern.geom.eli.tries will be used. 76geli_default_flags="" # Default flags for geli(8). 77geli_autodetach="YES" # Automatically detach on last close. 78 # Providers are marked as such when all file systems are 79 # mounted. 80# Example use. 81#geli_devices="da1 mirror/home" 82#geli_da1_flags="-p -k /etc/geli/da1.keys" 83#geli_da1_autodetach="NO" 84#geli_mirror_home_flags="-k /etc/geli/home.keys" 85 86root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 87fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 88fsck_y_flags="" # Additional flags for fsck -y 89background_fsck="YES" # Attempt to run fsck in the background where possible. 90background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 91netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 92extra_netfs_types="NO" # List of network extra filesystem types for delayed 93 # mount at startup (or NO). 94 95############################################################## 96### Network configuration sub-section ###################### 97############################################################## 98 99### Basic network and firewall/security options: ### 100hostname="" # Set this! 101hostid_enable="YES" # Set host UUID. 102hostid_file="/etc/hostid" # File with hostuuid. 103nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 104dhclient_program="/sbin/dhclient" # Path to dhcp client program. 105dhclient_flags="" # Extra flags to pass to dhcp client. 106#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 107background_dhclient="NO" # Start dhcp client in the background. 108#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 109synchronous_dhclient="NO" # Start dhclient directly on configured 110 # interfaces during startup. 111defaultroute_delay="4" # Time to wait for a default route on a DHCP interface. 112defaultroute_carrier_delay="3" # Time to wait for carrier while waiting for a default route. 113netif_enable="YES" # Set to YES to initialize network interfaces 114netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 115wpa_supplicant_program="/usr/sbin/wpa_supplicant" 116wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 117wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 118# 119firewall_enable="NO" # Set to YES to enable firewall functionality 120firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 121firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 122firewall_quiet="NO" # Set to YES to suppress rule display 123firewall_logging="NO" # Set to YES to enable events logging 124firewall_logif="NO" # Set to YES to create logging-pseudo interface 125firewall_flags="" # Flags passed to ipfw when type is a file 126firewall_coscripts="" # List of executables/scripts to run after 127 # firewall starts/stops 128firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 129 # firewall. 130#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 131 # "client" firewall. 132firewall_simple_iif="ed1" # Inside network interface for "simple" 133 # firewall. 134firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 135 # firewall. 136firewall_simple_oif="ed0" # Outside network interface for "simple" 137 # firewall. 138firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 139 # firewall. 140#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" 141 # firewall. 142#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 143 # for "simple" firewall. 144#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" 145 # firewall. 146#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 147 # for "simple" firewall. 148firewall_myservices="" # List of TCP ports on which this host 149 # offers services for "workstation" firewall. 150firewall_allowservices="" # List of IPs which have access to 151 # $firewall_myservices for "workstation" 152 # firewall. 153firewall_trusted="" # List of IPs which have full access to this 154 # host for "workstation" firewall. 155firewall_logdeny="NO" # Set to YES to log default denied incoming 156 # packets for "workstation" firewall. 157firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 158 # for which denied incoming packets are not 159 # logged for "workstation" firewall. 160firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 161firewall_nat_interface="" # Public interface or IPaddress to use 162firewall_nat_flags="" # Additional configuration parameters 163dummynet_enable="NO" # Load the dummynet(4) module 164ip_portrange_first="NO" # Set first dynamically allocated port 165ip_portrange_last="NO" # Set last dynamically allocated port 166ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 167ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 168ike_flags="" # Additional flags for IKE daemon 169ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 170ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 171natd_program="/sbin/natd" # path to natd, if you want a different one. 172natd_enable="NO" # Enable natd (if firewall_enable == YES). 173natd_interface="" # Public interface or IPaddress to use. 174natd_flags="" # Additional flags for natd. 175ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 176ipfilter_program="/sbin/ipf" # where the ipfilter program lives 177ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 178 # /usr/src/contrib/ipfilter/rules for examples 179ipfilter_flags="" # additional flags for ipfilter 180ipnat_enable="NO" # Set to YES to enable ipnat functionality 181ipnat_program="/sbin/ipnat" # where the ipnat program lives 182ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 183ipnat_flags="" # additional flags for ipnat 184ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 185ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 186ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 187ipfs_enable="NO" # Set to YES to enable saving and restoring 188 # of state tables at shutdown and boot 189ipfs_program="/sbin/ipfs" # where the ipfs program lives 190ipfs_flags="" # additional flags for ipfs 191pf_enable="NO" # Set to YES to enable packet filter (pf) 192pf_rules="/etc/pf.conf" # rules definition file for pf 193pf_program="/sbin/pfctl" # where the pfctl program lives 194pf_flags="" # additional flags for pfctl 195pflog_enable="NO" # Set to YES to enable packet filter logging 196pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 197pflog_program="/sbin/pflogd" # where the pflogd program lives 198pflog_flags="" # additional flags for pflogd 199ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 200ftpproxy_flags="" # additional flags for ftp-proxy(8) 201pfsync_enable="NO" # Expose pf state to other hosts for syncing 202pfsync_syncdev="" # Interface for pfsync to work through 203pfsync_syncpeer="" # IP address of pfsync peer host 204pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 205tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 206log_in_vain="0" # >=1 to log connects to ports w/o listeners. 207tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 208tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 209 # NOTE: this violates the TCP specification 210icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 211icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 212network_interfaces="auto" # List of network interfaces (or "auto"). 213cloned_interfaces="" # List of cloned network interfaces to create. 214#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 215#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 216#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 217#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 218#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 219#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 220#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device 221#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 222#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 223#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8) 224#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 225# 226#autobridge_interfaces="bridge0" # List of bridges to check 227#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 228# 229# If you have any sppp(4) interfaces above, you might also want to set 230# the following parameters. Refer to spppcontrol(8) for their meaning. 231sppp_interfaces="" # List of sppp interfaces. 232#sppp_interfaces="...0" # example: sppp over ... 233#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 234 235# User ppp configuration. 236ppp_enable="NO" # Start user-ppp (or NO). 237ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 238ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 239 # For details see man page for ppp(8). Default is auto. 240ppp_nat="YES" # Use PPP's internal network address translation or NO. 241ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 242ppp_user="root" # Which user to run ppp as 243 244# Start multiple instances of ppp at boot time 245#ppp_profile="profile1 profile2 profile3" # Which profiles to use 246#ppp_profile1_mode="ddial" # Override ppp mode for profile1 247#ppp_profile2_nat="NO" # Override nat mode for profile2 248# profile3 uses default ppp_mode and ppp_nat 249 250### Network daemon (miscellaneous) ### 251hostapd_enable="NO" # Run hostap daemon. 252syslogd_enable="NO" # Run syslog daemon (or NO). 253syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 254syslogd_flags="-s" # Flags to syslogd (if enabled). 255altlog_proglist="" # List of chrooted applicatioins in /var 256inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 257inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 258inetd_flags="-wW -C 60" # Optional flags to inetd 259iscsid_enable="NO" # iSCSI initiator daemon. 260iscsictl_enable="NO" # iSCSI initiator autostart. 261iscsictl_flags="-Aa" # Optional flags to iscsictl. 262hastd_enable="NO" # Run the HAST daemon (YES/NO). 263hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 264hastd_flags="" # Optional flags to hastd. 265ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 266local_unbound_enable="NO" # local caching resolver 267 268# 269# kerberos. Do not run the admin daemons on slave servers 270# 271kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 272kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 273kdc_flags="" # Additional flags to the kerberos 5 KDC 274kadmind_enable="NO" # Run kadmind (or NO) 275kadmind_program="/usr/libexec/kadmind" # path to kadmind 276kpasswdd_enable="NO" # Run kpasswdd (or NO) 277kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 278kfd_enable="NO" # Run kfd (or NO) 279kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 280kfd_flags="" 281ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 282 # (master daemon). 283ipropd_master_program="/usr/libexec/ipropd-master" 284ipropd_master_flags="" # Flags to ipropd-master. 285ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 286ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 287ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 288 # (slave daemon). 289ipropd_slave_program="/usr/libexec/ipropd-slave" 290ipropd_slave_flags="" # Flags to ipropd-slave. 291ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 292ipropd_slave_master="" # master node name. 293 294gssd_enable="NO" # Run the gssd daemon (or NO). 295gssd_program="/usr/sbin/gssd" # Path to gssd. 296gssd_flags="" # Flags for gssd. 297 298rwhod_enable="NO" # Run the rwho daemon (or NO). 299rwhod_flags="" # Flags for rwhod 300rarpd_enable="NO" # Run rarpd (or NO). 301rarpd_flags="-a" # Flags to rarpd. 302bootparamd_enable="NO" # Run bootparamd (or NO). 303bootparamd_flags="" # Flags to bootparamd 304pppoed_enable="NO" # Run the PPP over Ethernet daemon. 305pppoed_provider="*" # Provider and ppp(8) config file entry. 306pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 307pppoed_interface="fxp0" # The interface that pppoed runs on. 308sshd_enable="NO" # Enable sshd 309sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 310sshd_flags="" # Additional flags for sshd. 311ftpd_enable="NO" # Enable stand-alone ftpd. 312ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 313ftpd_flags="" # Additional flags to stand-alone ftpd. 314 315### Network daemon (NFS): All need rpcbind_enable="YES" ### 316amd_enable="NO" # Run amd service with $amd_flags (or NO). 317amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 318amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 319amd_map_program="NO" # Can be set to "ypcat -k amd.master" 320autofs_enable="NO" # Run autofs daemons. 321automount_flags="" # Flags to automount(8) (if autofs enabled). 322automountd_flags="" # Flags to automountd(8) (if autofs enabled). 323autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 324nfs_client_enable="NO" # This host is an NFS client (or NO). 325nfs_access_cache="60" # Client cache timeout in seconds 326nfs_server_enable="NO" # This host is an NFS server (or NO). 327nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 328mountd_enable="NO" # Run mountd (or NO). 329mountd_flags="-r" # Flags to mountd (if NFS server enabled). 330weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 331nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 332nfs_bufpackets="" # bufspace (in packets) for client 333rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 334rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 335rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 336rpc_statd_flags="" # Flags to rpc.statd (if enabled). 337rpcbind_enable="NO" # Run the portmapper service (YES/NO). 338rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 339rpcbind_flags="" # Flags to rpcbind (if enabled). 340rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 341keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 342keyserv_flags="" # Flags to keyserv (if enabled). 343nfsv4_server_enable="NO" # Enable support for NFSv4 344nfscbd_enable="NO" # NFSv4 client side callback daemon 345nfscbd_flags="" # Flags for nfscbd 346nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 347nfsuserd_flags="" # Flags for nfsuserd 348 349### Network Time Services options: ### 350timed_enable="NO" # Run the time daemon (or NO). 351timed_flags="" # Flags to timed (if enabled). 352ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 353ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 354ntpdate_flags="-b" # Flags to ntpdate (if enabled). 355ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 356ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 357ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 358ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 359ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 360ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 361ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift" 362 # Flags to ntpd (if enabled). 363 364# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 365nis_client_enable="NO" # We're an NIS client (or NO). 366nis_client_flags="" # Flags to ypbind (if enabled). 367nis_ypset_enable="NO" # Run ypset at boot time (or NO). 368nis_ypset_flags="" # Flags to ypset (if enabled). 369nis_server_enable="NO" # We're an NIS server (or NO). 370nis_server_flags="" # Flags to ypserv (if enabled). 371nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 372nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 373nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 374nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 375 376### SNMP daemon ### 377# Be sure to understand the security implications of running SNMP v1/v2 378# in your network. 379bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 380bsnmpd_flags="" # Flags for bsnmpd. 381 382### Network routing options: ### 383defaultrouter="NO" # Set to default gateway (or NO). 384static_arp_pairs="" # Set to static ARP list (or leave empty). 385static_ndp_pairs="" # Set to static NDP list (or leave empty). 386static_routes="" # Set to static route list (or leave empty). 387natm_static_routes="" # Set to static route list for NATM (or leave empty). 388gateway_enable="NO" # Set to YES if this host will be a gateway. 389routed_enable="NO" # Set to YES to enable a routing daemon. 390routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 391routed_flags="-q" # Flags for routing daemon. 392arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 393forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 394accept_sourceroute="NO" # accept source routed packets to us 395 396### ATM interface options: ### 397atm_enable="NO" # Configure ATM interfaces (or NO). 398#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 399#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 400#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 401#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 402#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 403#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 404atm_pvcs="" # Set to PVC list (or leave empty). 405atm_arps="" # Set to permanent ARP list (or leave empty). 406 407### Bluetooth ### 408hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 409hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 410 411sdpd_enable="NO" # Enable sdpd(8) (or NO) 412sdpd_control="/var/run/sdp" # sdpd(8) control socket 413sdpd_groupname="nobody" # set spdp(8) user/group to run as after 414sdpd_username="nobody" # it initializes 415 416bthidd_enable="NO" # Enable bthidd(8) (or NO) 417bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 418bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 419 420rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 421rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 422# 423#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 424rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 425#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 426#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 427# 428#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 429rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 430#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 431#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 432 433ubthidhci_enable="NO" # Switch an USB BT controller present on 434#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 435#ubthidhci_addr="2" # Check usbconfig list to find the correct 436 # numbers for your system. 437 438### Network link/usability verification options 439netwait_enable="NO" # Enable rc.d/netwait (or NO) 440#netwait_ip="" # IP addresses to be pinged by netwait. 441netwait_timeout="60" # Total number of seconds to perform pings. 442#netwait_if="" # Interface name to watch link state on. 443netwait_if_timeout="30" # Total number of seconds to monitor link state. 444 445### Miscellaneous network options: ### 446icmp_bmcastecho="NO" # respond to broadcast ping packets 447 448### IPv6 options: ### 449ipv6_network_interfaces="auto" # List of IPv6 network interfaces 450 # (or "auto" or "none"). 451ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 452 # corresponding $ifconfig_IF_ipv6 is 453 # marked as IFDISABLED for security 454 # reason. 455ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 456#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 457ipv6_static_routes="" # Set to static route list (or leave empty). 458#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 459 # route toward loopback interface. 460#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 461ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 462ipv6_cpe_wanif="NO" # Set to the upstram interface name if this 463 # node will work as a router to forward IPv6 464 # packets not explicitly addressed to itself. 465ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 466 # (RFC 4941) 467 468route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 469route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 470route6d_flags="" # Flags to IPv6 routing daemon. 471#route6d_flags="-l" # Example for route6d with only IPv6 site local 472 # addrs. 473#route6d_flags="-q" # If you want to run a routing daemon on an end 474 # node, you should stop advertisement. 475#ipv6_network_interfaces="ed0 ep0" # Examples for router 476 # or static configuration for end node. 477 # Choose correct prefix value. 478#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 479#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 480ipv6_default_interface="NO" # Default output interface for scoped addrs. 481 # This works only with 482 # ipv6_gateway_enable="NO". 483rtsol_flags="" # Flags to IPv6 router solicitation. 484rtsold_enable="NO" # Set to YES to enable an IPv6 router 485 # solicitation daemon. 486rtsold_flags="-a" # Flags to an IPv6 router solicitation 487 # daemon. 488rtadvd_enable="NO" # Set to YES to enable an IPv6 router 489 # advertisement daemon. If set to YES, 490 # this router becomes a possible candidate 491 # IPv6 default router for local subnets. 492rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 493mroute6d_enable="NO" # Do IPv6 multicast routing. 494mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 495 # routing daemon. You need to 496 # install it from package or 497 # port. 498mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 499stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 500 # tunneling interface. Specify this entry 501 # to enable 6to4 interface. 502stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 503 # to limit peer addr range. Effective value 504 # is 0-31. 505stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 506 # If you like, you can set "AUTO" for this. 507stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 508ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 509 # communication. (like ::ffff:a.b.c.d) 510ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 511 # see /usr/src/contrib/ipfilter/rules 512 # for examples 513ip6addrctl_enable="YES" # Set to YES to enable default address selection 514ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 515ip6addrctl_policy="AUTO" # A pre-defined address selection policy 516 # (ipv4_prefer, ipv6_prefer, or AUTO) 517 518############################################################## 519### System console options ################################# 520############################################################## 521 522keyboard="" # keyboard device to use (default /dev/kbd0). 523keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 524keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 525keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 526keychange="NO" # function keys default values (or NO). 527cursor="NO" # cursor type {normal|blink|destructive} (or NO). 528scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 529font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 530font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 531font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 532blanktime="300" # blank time (in seconds) or "NO" to turn it off. 533saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 534moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 535 # specifically overriden in rc.conf(5). 536moused_enable="NO" # Run the mouse daemon. 537moused_type="auto" # See man page for rc.conf(5) for available settings. 538moused_port="/dev/psm0" # Set to your mouse port. 539moused_flags="" # Any additional flags to moused. 540mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 541 # language code table, specify alternative range 542 # start like mousechar_start=3, see vidcontrol(1) 543allscreens_flags="" # Set this vidcontrol mode for all virtual screens 544allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 545 546############################################################## 547### Mail Transfer Agent (MTA) options ###################### 548############################################################## 549 550mta_start_script="/etc/rc.sendmail" 551 # Script to start your chosen MTA, called by /etc/rc. 552# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 553sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 554sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 555sendmail_procname="/usr/sbin/sendmail" # sendmail process name 556sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 557sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 558#sendmail_cert_cn="CN" # CN of the generate certificate 559sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 560sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 561 # Flags for localhost-only MTA 562sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 563sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 564sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 565sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 566 # Flags for sendmail_msp_queue daemon. 567sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 568 569 570############################################################## 571### Miscellaneous administrative options ################### 572############################################################## 573 574auditd_enable="NO" # Run the audit daemon. 575auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 576auditd_flags="" # Which options to pass to the audit daemon. 577auditdistd_enable="NO" # Run the audit daemon. 578auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 579auditdistd_flags="" # Which options to pass to the auditdistd daemon. 580cron_enable="YES" # Run the periodic job daemon. 581cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 582cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 583cron_flags="" # Which options to pass to the cron daemon. 584lpd_enable="NO" # Run the line printer daemon. 585lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 586lpd_flags="" # Flags to lpd (if enabled). 587nscd_enable="NO" # Run the nsswitch caching daemon. 588chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 589chkprintcap_flags="-d" # Create missing directories by default. 590dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO). 591dumpdir="/var/crash" # Directory where crash dumps are to be stored 592savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 593 # By default, only the 10 most recent kernel dumps 594 # are saved. 595crashinfo_enable="YES" # Automatically generate crash dump summary. 596crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 597quota_enable="NO" # turn on quotas on startup (or NO). 598check_quotas="YES" # Check quotas on startup (or NO). 599quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 600quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 601quotacheck_flags="-a" # Check all file system quotas (if enabled) 602accounting_enable="NO" # Turn on process accounting (or NO). 603ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 604ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 605firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 606 # this file exists. Should be on a R/W filesystem so 607 # the file can be deleted after the boot completes. 608 609# Emulation/compatibility services provided by /etc/rc.d/abi 610sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 611linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 612svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 613clear_tmp_enable="NO" # Clear /tmp at startup. 614clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 615ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 616ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 617 # shared library search paths 618ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 619 # 32-bit compatibility shared library search paths 620ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 621 # a.out shared library search paths 622ldconfig_local_dirs="/usr/local/libdata/ldconfig" 623 # Local directories with ldconfig configuration files. 624ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 625 # Local directories with 32-bit compatibility ldconfig 626 # configuration files. 627kern_securelevel_enable="NO" # kernel security level (see security(7)) 628kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 629 # Note that setting securelevel to 0 will result 630 # in the system booting with securelevel set to 1, as 631 # init(8) will raise the level when rc(8) completes. 632update_motd="YES" # update version info in /etc/motd (or NO) 633entropy_boot_file="/boot/entropy" # Set to NO to disable very early 634 # (used at early boot time) entropy caching through reboots. 635entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 636 # entropy through reboots. 637 # /var/db/entropy-file is preferred if / is not avail. 638entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 639entropy_save_sz="4096" # Size of the entropy cache files. 640entropy_save_num="8" # Number of entropy cache files to save. 641harvest_mask="511" # Entropy device harvests all but the very invasive sources. 642 # (See 'sysctl kern.random.harvest' and random(4)) 643dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 644watchdogd_enable="NO" # Start the software watchdog daemon 645watchdogd_flags="" # Flags to watchdogd (if enabled) 646devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 647 # devfs(8) rules. 648devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 649devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 650 # apply (must be mounted already, i.e. fstab(5)) 651devfs_load_rulesets="YES" # Enable to always load the default rulesets 652performance_cx_lowest="C2" # Online CPU idle state 653performance_cpu_freq="NONE" # Online CPU frequency 654economy_cx_lowest="Cmax" # Offline CPU idle state 655economy_cpu_freq="NONE" # Offline CPU frequency 656virecover_enable="YES" # Perform housekeeping for the vi(1) editor 657ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 658bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 659 # ruleset file. 660newsyslog_enable="YES" # Run newsyslog at startup. 661newsyslog_flags="-CN" # Newsyslog flags to create marked files 662mixer_enable="YES" # Run the sound mixer. 663opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 664casperd_enable="YES" # casperd(8) daemon 665 666# rctl(8) requires kernel options RACCT and RCTL 667rctl_enable="YES" # Load rctl(8) rules on boot 668rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 669 670iovctl_files="" # Config files for iovctl(8) 671 672############################################################## 673### Jail Configuration (see rc.conf(5) manual page) ########## 674############################################################## 675jail_enable="NO" # Set to NO to disable starting of any jails 676jail_parallel_start="NO" # Start jails in the background 677jail_list="" # Space separated list of names of jails 678 679############################################################## 680### Define source_rc_confs, the mechanism used by /etc/rc.* ## 681### scripts to source rc_conf_files overrides safely. ## 682############################################################## 683 684if [ -z "${source_rc_confs_defined}" ]; then 685 source_rc_confs_defined=yes 686 source_rc_confs() { 687 local i sourced_files 688 for i in ${rc_conf_files}; do 689 case ${sourced_files} in 690 *:$i:*) 691 ;; 692 *) 693 sourced_files="${sourced_files}:$i:" 694 if [ -r $i ]; then 695 . $i 696 fi 697 ;; 698 esac 699 done 700 } 701fi 702