1 /* Remote serial support interface definitions for GDB, the GNU Debugger. 2 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000 3 Free Software Foundation, Inc. 4 5 This file is part of GDB. 6 7 This program is free software; you can redistribute it and/or modify 8 it under the terms of the GNU General Public License as published by 9 the Free Software Foundation; either version 2 of the License, or 10 (at your option) any later version. 11 12 This program is distributed in the hope that it will be useful, 13 but WITHOUT ANY WARRANTY; without even the implied warranty of 14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this program; if not, write to the Free Software 19 Foundation, Inc., 59 Temple Place - Suite 330, 20 Boston, MA 02111-1307, USA. */ 21 22 #ifndef SERIAL_H 23 #define SERIAL_H 24 25 struct ui_file; 26 27 /* For most routines, if a failure is indicated, then errno should be 28 examined. */ 29 30 /* Terminal state pointer. This is specific to each type of 31 interface. */ 32 33 typedef void *serial_ttystate; 34 struct serial; 35 36 /* Try to open NAME. Returns a new `struct serial *' on success, NULL 37 on failure. Note that some open calls can block and, if possible, 38 should be written to be non-blocking, with calls to ui_look_hook 39 so they can be cancelled. An async interface for open could be 40 added to GDB if necessary. */ 41 42 extern struct serial *serial_open (const char *name); 43 44 /* Open a new serial stream using a file handle. */ 45 46 extern struct serial *serial_fdopen (const int fd); 47 48 /* Push out all buffers, close the device and destroy SCB. */ 49 50 extern void serial_close (struct serial *scb); 51 52 /* Push out all buffers and destroy SCB without closing the device. */ 53 54 extern void serial_un_fdopen (struct serial *scb); 55 56 /* Read one char from the serial device with TIMEOUT seconds to wait 57 or -1 to wait forever. Use timeout of 0 to effect a poll. 58 Infinite waits are not permitted. Returns unsigned char if ok, else 59 one of the following codes. Note that all error return-codes are 60 guaranteed to be < 0. */ 61 62 enum serial_rc { 63 SERIAL_ERROR = -1, /* General error. */ 64 SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read. 65 Unfortunately, through ui_loop_hook(), this 66 can also be a QUIT indication. */ 67 SERIAL_EOF = -3 /* General end-of-file or remote target 68 connection closed, indication. Includes 69 things like the line dropping dead. */ 70 }; 71 72 extern int serial_readchar (struct serial *scb, int timeout); 73 74 /* Write LEN chars from STRING to the port SCB. Returns 0 for 75 success, non-zero for failure. */ 76 77 extern int serial_write (struct serial *scb, const char *str, int len); 78 79 /* Write a printf style string onto the serial port. */ 80 81 extern void serial_printf (struct serial *desc, const char *,...) ATTR_FORMAT (printf, 2, 3); 82 83 /* Allow pending output to drain. */ 84 85 extern int serial_drain_output (struct serial *); 86 87 /* Flush (discard) pending output. Might also flush input (if this 88 system can't flush only output). */ 89 90 extern int serial_flush_output (struct serial *); 91 92 /* Flush pending input. Might also flush output (if this system can't 93 flush only input). */ 94 95 extern int serial_flush_input (struct serial *); 96 97 /* Send a break between 0.25 and 0.5 seconds long. */ 98 99 extern int serial_send_break (struct serial *scb); 100 101 /* Turn the port into raw mode. */ 102 103 extern void serial_raw (struct serial *scb); 104 105 /* Return a pointer to a newly malloc'd ttystate containing the state 106 of the tty. */ 107 108 extern serial_ttystate serial_get_tty_state (struct serial *scb); 109 110 /* Set the state of the tty to TTYSTATE. The change is immediate. 111 When changing to or from raw mode, input might be discarded. 112 Returns 0 for success, negative value for error (in which case 113 errno contains the error). */ 114 115 extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate); 116 117 /* printf_filtered a user-comprehensible description of ttystate on 118 the specified STREAM. FIXME: At present this sends output to the 119 default stream - GDB_STDOUT. */ 120 121 extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *); 122 123 /* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the 124 current state (generally obtained from a recent call to 125 serial_get_tty_state()), but be careful not to discard any input. 126 This means that we never switch in or out of raw mode, even if 127 NEW_TTYSTATE specifies a switch. */ 128 129 extern int serial_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate); 130 131 /* Set the baudrate to the decimal value supplied. Returns 0 for 132 success, -1 for failure. */ 133 134 extern int serial_setbaudrate (struct serial *scb, int rate); 135 136 /* Set the number of stop bits to the value specified. Returns 0 for 137 success, -1 for failure. */ 138 139 #define SERIAL_1_STOPBITS 1 140 #define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */ 141 #define SERIAL_2_STOPBITS 3 142 143 extern int serial_setstopbits (struct serial *scb, int num); 144 145 /* Asynchronous serial interface: */ 146 147 /* Can the serial device support asynchronous mode? */ 148 149 extern int serial_can_async_p (struct serial *scb); 150 151 /* Has the serial device been put in asynchronous mode? */ 152 153 extern int serial_is_async_p (struct serial *scb); 154 155 /* For ASYNC enabled devices, register a callback and enable 156 asynchronous mode. To disable asynchronous mode, register a NULL 157 callback. */ 158 159 typedef void (serial_event_ftype) (struct serial *scb, void *context); 160 extern void serial_async (struct serial *scb, serial_event_ftype *handler, void *context); 161 162 /* Provide direct access to the underlying FD (if any) used to 163 implement the serial device. This interface is clearly 164 deprecated. Will call internal_error() if the operation isn't 165 applicable to the current serial device. */ 166 167 extern int deprecated_serial_fd (struct serial *scb); 168 169 /* Trace/debug mechanism. 170 171 serial_debug() enables/disables internal debugging. 172 serial_debug_p() indicates the current debug state. */ 173 174 extern void serial_debug (struct serial *scb, int debug_p); 175 176 extern int serial_debug_p (struct serial *scb); 177 178 179 /* Details of an instance of a serial object */ 180 181 struct serial 182 { 183 int fd; /* File descriptor */ 184 struct serial_ops *ops; /* Function vector */ 185 void *state; /* Local context info for open FD */ 186 serial_ttystate ttystate; /* Not used (yet) */ 187 int bufcnt; /* Amount of data remaining in receive 188 buffer. -ve for sticky errors. */ 189 unsigned char *bufp; /* Current byte */ 190 unsigned char buf[BUFSIZ]; /* Da buffer itself */ 191 int current_timeout; /* (ser-unix.c termio{,s} only), last 192 value of VTIME */ 193 int timeout_remaining; /* (ser-unix.c termio{,s} only), we 194 still need to wait for this many 195 more seconds. */ 196 char *name; /* The name of the device or host */ 197 struct serial *next; /* Pointer to the next `struct serial *' */ 198 int refcnt; /* Number of pointers to this block */ 199 int debug_p; /* Trace this serial devices operation. */ 200 int async_state; /* Async internal state. */ 201 void *async_context; /* Async event thread's context */ 202 serial_event_ftype *async_handler;/* Async event handler */ 203 }; 204 205 struct serial_ops 206 { 207 char *name; 208 struct serial_ops *next; 209 int (*open) (struct serial *, const char *name); 210 void (*close) (struct serial *); 211 int (*readchar) (struct serial *, int timeout); 212 int (*write) (struct serial *, const char *str, int len); 213 /* Discard pending output */ 214 int (*flush_output) (struct serial *); 215 /* Discard pending input */ 216 int (*flush_input) (struct serial *); 217 int (*send_break) (struct serial *); 218 void (*go_raw) (struct serial *); 219 serial_ttystate (*get_tty_state) (struct serial *); 220 int (*set_tty_state) (struct serial *, serial_ttystate); 221 void (*print_tty_state) (struct serial *, serial_ttystate, 222 struct ui_file *); 223 int (*noflush_set_tty_state) (struct serial *, serial_ttystate, 224 serial_ttystate); 225 int (*setbaudrate) (struct serial *, int rate); 226 int (*setstopbits) (struct serial *, int num); 227 /* Wait for output to drain */ 228 int (*drain_output) (struct serial *); 229 /* Change the serial device into/out of asynchronous mode, call 230 the specified function when ever there is something 231 interesting. */ 232 void (*async) (struct serial *scb, int async_p); 233 }; 234 235 /* Add a new serial interface to the interface list */ 236 237 extern void serial_add_interface (struct serial_ops * optable); 238 239 /* File in which to record the remote debugging session */ 240 241 extern void serial_log_command (const char *); 242 243 #endif /* SERIAL_H */ 244