1 /* $NetBSD: pl061.c,v 1.4 2021/08/07 16:19:12 thorpej Exp $ */
2 
3 /*
4  * Copyright (c) 2018 Jonathan A. Kollasch
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
18  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
20  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
21  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
22  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
23  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
24  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
25  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
26  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28 
29 #include <sys/cdefs.h>
30 __KERNEL_RCSID(0, "$NetBSD: pl061.c,v 1.4 2021/08/07 16:19:12 thorpej Exp $");
31 
32 #include <sys/param.h>
33 #include <sys/bus.h>
34 #include <sys/device.h>
35 #include <sys/intr.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
38 #include <sys/kmem.h>
39 #include <sys/gpio.h>
40 
41 #include <dev/gpio/gpiovar.h>
42 #include "gpio.h"
43 
44 #include <dev/ic/pl061reg.h>
45 #include <dev/ic/pl061var.h>
46 
47 void
plgpio_attach(struct plgpio_softc * sc)48 plgpio_attach(struct plgpio_softc *sc)
49 {
50           struct gpiobus_attach_args gba;
51           u_int pin;
52 
53           sc->sc_gc.gp_cookie = sc;
54           sc->sc_gc.gp_pin_read = plgpio_pin_read;
55           sc->sc_gc.gp_pin_write = plgpio_pin_write;
56           sc->sc_gc.gp_pin_ctl = plgpio_pin_ctl;
57 
58           const uint32_t cnf = PLGPIO_READ(sc, PL061_GPIOAFSEL_REG) |
59               sc->sc_reserved_mask;
60 
61           for (pin = 0; pin < 8; pin++) {
62                     sc->sc_pins[pin].pin_num = pin;
63                     /* skip pins in hardware control mode */
64                     if ((cnf & __BIT(pin)) != 0)
65                               continue;
66                     sc->sc_pins[pin].pin_caps =
67                         GPIO_PIN_INPUT | GPIO_PIN_OUTPUT |
68                         GPIO_PIN_TRISTATE;
69                     sc->sc_pins[pin].pin_state =
70                         plgpio_pin_read(sc, pin);
71           }
72 
73           memset(&gba, 0, sizeof(gba));
74           gba.gba_gc = &sc->sc_gc;
75           gba.gba_pins = sc->sc_pins;
76           gba.gba_npins = 8;
77 
78 #if NGPIO > 0
79           config_found(sc->sc_dev, &gba, gpiobus_print, CFARGS_NONE);
80 #endif
81 }
82 
83 int
plgpio_pin_read(void * priv,int pin)84 plgpio_pin_read(void *priv, int pin)
85 {
86           struct plgpio_softc * const sc = priv;
87 
88           const uint32_t v = PLGPIO_READ(sc, PL061_GPIODATA_REG(1<<pin));
89 
90           return (v >> pin) & 1;
91 }
92 
93 void
plgpio_pin_write(void * priv,int pin,int val)94 plgpio_pin_write(void *priv, int pin, int val)
95 {
96           struct plgpio_softc * const sc = priv;
97 
98           PLGPIO_WRITE(sc, PL061_GPIODATA_REG(1 << pin), val << pin);
99 }
100 
101 void
plgpio_pin_ctl(void * priv,int pin,int flags)102 plgpio_pin_ctl(void *priv, int pin, int flags)
103 {
104           struct plgpio_softc * const sc = priv;
105           uint32_t v;
106 
107           if (flags & GPIO_PIN_INPUT) {
108                     v = PLGPIO_READ(sc, PL061_GPIODIR_REG);
109                     v &= ~(1 << pin);
110                     PLGPIO_WRITE(sc, PL061_GPIODIR_REG, v);
111           } else if (flags & GPIO_PIN_OUTPUT) {
112                     v = PLGPIO_READ(sc, PL061_GPIODIR_REG);
113                     v |= (1 << pin);
114                     PLGPIO_WRITE(sc, PL061_GPIODIR_REG, v);
115           }
116 }
117