1 /*        $NetBSD: malta_intr.c,v 1.27 2020/11/21 15:36:36 thorpej Exp $        */
2 
3 /*
4  * Copyright 2001, 2002 Wasabi Systems, Inc.
5  * All rights reserved.
6  *
7  * Written by Jason R. Thorpe and Simon Burge for Wasabi Systems, Inc.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 3. All advertising materials mentioning features or use of this software
18  *    must display the following acknowledgement:
19  *      This product includes software developed for the NetBSD Project by
20  *      Wasabi Systems, Inc.
21  * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22  *    or promote products derived from this software without specific prior
23  *    written permission.
24  *
25  * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
29  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35  * POSSIBILITY OF SUCH DAMAGE.
36  */
37 
38 /*
39  * Platform-specific interrupt support for the MIPS Malta.
40  */
41 
42 #include <sys/cdefs.h>
43 __KERNEL_RCSID(0, "$NetBSD: malta_intr.c,v 1.27 2020/11/21 15:36:36 thorpej Exp $");
44 
45 #define   __INTR_PRIVATE
46 
47 #include <sys/param.h>
48 #include <sys/device.h>
49 #include <sys/kernel.h>
50 #include <sys/kmem.h>
51 #include <sys/systm.h>
52 #include <sys/cpu.h>
53 
54 #include <mips/locore.h>
55 
56 #include <evbmips/malta/maltavar.h>
57 #include <evbmips/malta/pci/pcibvar.h>
58 
59 #include <dev/ic/mc146818reg.h>                   /* for malta_cal_timer() */
60 
61 #include <dev/isa/isavar.h>
62 #include <dev/pci/pciidereg.h>
63 
64 /*
65  * This is a mask of bits to clear in the SR when we go to a
66  * given hardware interrupt priority level.
67  */
68 static const struct ipl_sr_map malta_ipl_sr_map = {
69     .sr_bits = {
70           [IPL_NONE] =                  0,
71           [IPL_SOFTCLOCK] =   MIPS_SOFT_INT_MASK_0,
72           [IPL_SOFTNET] =               MIPS_SOFT_INT_MASK,
73           [IPL_VM] =                    MIPS_SOFT_INT_MASK | MIPS_INT_MASK_0,
74           [IPL_SCHED] =                 MIPS_SOFT_INT_MASK | MIPS_INT_MASK_0
75                                             | MIPS_INT_MASK_5,
76           [IPL_DDB] =                   MIPS_INT_MASK,
77           [IPL_HIGH] =                  MIPS_INT_MASK,
78     },
79 };
80 
81 struct malta_cpuintr {
82           LIST_HEAD(, evbmips_intrhand) cintr_list;
83           struct evcnt cintr_count;
84 };
85 #define   NINTRS              5         /* MIPS INT0 - INT4 */
86 
87 struct malta_cpuintr malta_cpuintrs[NINTRS];
88 const char * const malta_cpuintrnames[NINTRS] = {
89           "int 0 (piix4)",
90           "int 1 (smi)",
91           "int 2 (uart)",
92           "int 3 (core hi/gt64120)",
93           "int 4 (core lo)",
94 };
95 
96 static int          malta_pci_intr_map(const struct pci_attach_args *,
97                         pci_intr_handle_t *);
98 static const char
99                     *malta_pci_intr_string(void *, pci_intr_handle_t, char *, size_t);
100 static const struct evcnt
101                     *malta_pci_intr_evcnt(void *, pci_intr_handle_t);
102 static void         *malta_pci_intr_establish(void *, pci_intr_handle_t, int,
103                         int (*)(void *), void *);
104 static void         malta_pci_intr_disestablish(void *, void *);
105 static void         malta_pci_conf_interrupt(void *, int, int, int, int, int *);
106 static void         *malta_pciide_compat_intr_establish(void *, device_t,
107                         const struct pci_attach_args *, int, int (*)(void *),
108                         void *);
109 
110 void
evbmips_intr_init(void)111 evbmips_intr_init(void)
112 {
113           struct malta_config * const mcp = &malta_configuration;
114 
115           ipl_sr_map = malta_ipl_sr_map;
116 
117           for (size_t i = 0; i < NINTRS; i++) {
118                     LIST_INIT(&malta_cpuintrs[i].cintr_list);
119                     evcnt_attach_dynamic(&malta_cpuintrs[i].cintr_count,
120                         EVCNT_TYPE_INTR, NULL, "mips", malta_cpuintrnames[i]);
121           }
122 
123           mcp->mc_pc.pc_intr_v = NULL;
124           mcp->mc_pc.pc_intr_map = malta_pci_intr_map;
125           mcp->mc_pc.pc_intr_string = malta_pci_intr_string;
126           mcp->mc_pc.pc_intr_evcnt = malta_pci_intr_evcnt;
127           mcp->mc_pc.pc_intr_establish = malta_pci_intr_establish;
128           mcp->mc_pc.pc_intr_disestablish = malta_pci_intr_disestablish;
129           mcp->mc_pc.pc_conf_interrupt = malta_pci_conf_interrupt;
130           mcp->mc_pc.pc_pciide_compat_intr_establish =
131               malta_pciide_compat_intr_establish;
132 }
133 
134 void
malta_cal_timer(bus_space_tag_t st,bus_space_handle_t sh)135 malta_cal_timer(bus_space_tag_t st, bus_space_handle_t sh)
136 {
137           struct cpu_info * const ci = curcpu();
138           uint32_t ctrdiff[4], startctr, endctr;
139           uint8_t regc;
140           int i;
141 
142           /* Disable interrupts first. */
143           bus_space_write_1(st, sh, 0, MC_REGB);
144           bus_space_write_1(st, sh, 1, MC_REGB_SQWE | MC_REGB_BINARY |
145               MC_REGB_24HR);
146 
147           /* Initialize for 16Hz. */
148           bus_space_write_1(st, sh, 0, MC_REGA);
149           bus_space_write_1(st, sh, 1, MC_BASE_32_KHz | MC_RATE_16_Hz);
150 
151           /* Run the loop an extra time to prime the cache. */
152           for (i = 0; i < 4; i++) {
153                     // led_display('h', 'z', '0' + i, ' ');
154 
155                     /* Enable the interrupt. */
156                     bus_space_write_1(st, sh, 0, MC_REGB);
157                     bus_space_write_1(st, sh, 1, MC_REGB_PIE | MC_REGB_SQWE |
158                         MC_REGB_BINARY | MC_REGB_24HR);
159 
160                     /* Go to REGC. */
161                     bus_space_write_1(st, sh, 0, MC_REGC);
162 
163                     /* Wait for it to happen. */
164                     startctr = mips3_cp0_count_read();
165                     do {
166                               regc = bus_space_read_1(st, sh, 1);
167                               endctr = mips3_cp0_count_read();
168                     } while ((regc & MC_REGC_IRQF) == 0);
169 
170                     /* Already ACK'd. */
171 
172                     /* Disable. */
173                     bus_space_write_1(st, sh, 0, MC_REGB);
174                     bus_space_write_1(st, sh, 1, MC_REGB_SQWE | MC_REGB_BINARY |
175                         MC_REGB_24HR);
176 
177                     ctrdiff[i] = endctr - startctr;
178           }
179 
180           /* Compute the number of cycles per second. */
181           ci->ci_cpu_freq = ((ctrdiff[2] + ctrdiff[3]) / 2) * 16/*Hz*/;
182 
183           /* Compute the number of ticks for hz. */
184           ci->ci_cycles_per_hz = (ci->ci_cpu_freq + hz / 2) / hz;
185 
186           /* Compute the delay divisor. */
187           ci->ci_divisor_delay = ((ci->ci_cpu_freq + 500000) / 1000000);
188 
189           /*
190            * Get correct cpu frequency if the CPU runs at twice the
191            * external/cp0-count frequency.
192            */
193           ci->ci_cctr_freq = ci->ci_cpu_freq;
194           if (mips_options.mips_cpu_flags & CPU_MIPS_DOUBLE_COUNT)
195                     ci->ci_cpu_freq *= 2;
196 
197 #ifdef DEBUG
198           printf("Timer calibration: %lu cycles/sec [(%u, %u) * 16]\n",
199               ci->ci_cpu_freq, ctrdiff[2], ctrdiff[3]);
200 #endif
201 }
202 
203 void *
evbmips_intr_establish(int irq,int (* func)(void *),void * arg)204 evbmips_intr_establish(int irq, int (*func)(void *), void *arg)
205 {
206           struct evbmips_intrhand *ih;
207           int s;
208 
209           ih = kmem_alloc(sizeof(*ih), KM_SLEEP);
210           ih->ih_func = func;
211           ih->ih_arg = arg;
212 
213           s = splhigh();
214 
215           /*
216            * Link it into the tables.
217            */
218           LIST_INSERT_HEAD(&malta_cpuintrs[0].cintr_list, ih, ih_q);
219 
220           /* XXX - should check that MIPS_INT_MASK_0 is set... */
221 
222           splx(s);
223 
224           return (ih);
225 }
226 
227 void
evbmips_intr_disestablish(void * arg)228 evbmips_intr_disestablish(void *arg)
229 {
230           struct evbmips_intrhand *ih = arg;
231           int s;
232 
233           s = splhigh();
234 
235           /*
236            * First, remove it from the table.
237            */
238           LIST_REMOVE(ih, ih_q);
239 
240           /* XXX - disable MIPS_INT_MASK_0 if list is empty? */
241 
242           splx(s);
243 
244           kmem_free(ih, sizeof(*ih));
245 }
246 
247 void
evbmips_iointr(int ipl,uint32_t ipending,struct clockframe * cf)248 evbmips_iointr(int ipl, uint32_t ipending, struct clockframe *cf)
249 {
250 
251           /* Check for error interrupts (SMI, GT64120) */
252           if (ipending & (MIPS_INT_MASK_1 | MIPS_INT_MASK_3)) {
253                     if (ipending & MIPS_INT_MASK_1)
254                               panic("piix4 SMI interrupt");
255                     if (ipending & MIPS_INT_MASK_3)
256                               panic("gt64120 error interrupt");
257           }
258 
259           /*
260            * Read the interrupt pending registers, mask them with the
261            * ones we have enabled, and service them in order of decreasing
262            * priority.
263            */
264           if (ipending & MIPS_INT_MASK_0) {
265                     struct evbmips_intrhand *ih;
266                     /* All interrupts are gated through MIPS HW interrupt 0 */
267                     malta_cpuintrs[0].cintr_count.ev_count++;
268                     LIST_FOREACH(ih, &malta_cpuintrs[0].cintr_list, ih_q)
269                               (*ih->ih_func)(ih->ih_arg);
270           }
271 }
272 
273 /*
274  * YAMON configures pa_intrline correctly (so far), so we trust it to DTRT
275  * in the future...
276  */
277 #undef YAMON_IRQ_MAP_BAD
278 
279 /*
280  * PCI interrupt support
281  */
282 static int
malta_pci_intr_map(const struct pci_attach_args * pa,pci_intr_handle_t * ihp)283 malta_pci_intr_map(const struct pci_attach_args *pa, pci_intr_handle_t *ihp)
284 {
285 #ifdef YAMON_IRQ_MAP_BAD
286           static const int pciirqmap[12/*device*/][4/*pin*/] = {
287                     { -1, -1, -1, 11 }, /* 10: USB */
288                     { 10, -1, -1, -1 }, /* 11: Ethernet */
289                     { 11, -1, -1, -1 }, /* 12: Audio */
290                     { -1, -1, -1, -1 }, /* 13: not used */
291                     { -1, -1, -1, -1 }, /* 14: not used */
292                     { -1, -1, -1, -1 }, /* 15: not used */
293                     { -1, -1, -1, -1 }, /* 16: not used */
294                     { -1, -1, -1, -1 }, /* 17: Core card(?) */
295                     { 10, 10, 11, 11 }, /* 18: PCI Slot 1 */
296                     { 10, 11, 11, 10 }, /* 19: PCI Slot 2 */
297                     { 11, 11, 10, 10 }, /* 20: PCI Slot 3 */
298                     { 11, 10, 10, 11 }, /* 21: PCI Slot 4 */
299           };
300           int buspin, device, irq;
301 #else     /* !YAMON_IRQ_MAP_BAD */
302           int buspin;
303 #endif    /* !YAMON_IRQ_MAP_BAD */
304 
305           buspin = pa->pa_intrpin;
306 
307           if (buspin == 0) {
308                     /* No IRQ used. */
309                     return (1);
310           }
311 
312           if (buspin > 4) {
313                     printf("malta_pci_intr_map: bad interrupt pin %d\n", buspin);
314                     return (1);
315           }
316 
317 #ifdef YAMON_IRQ_MAP_BAD
318           pci_decompose_tag(pa->pa_pc, pa->pa_intrtag, NULL, &device, NULL);
319 
320           if (device < 10 || device > 21) {
321                     printf("malta_pci_intr_map: bad device %d\n", device);
322                     return (1);
323           }
324 
325           irq = pciirqmap[device - 10][buspin - 1];
326           if (irq == -1) {
327                     printf("malta_pci_intr_map: no mapping for device %d pin %d\n",
328                         device, buspin);
329                     return (1);
330           }
331 
332           *ihp = irq;
333 #else     /* !YAMON_IRQ_MAP_BAD */
334           *ihp = pa->pa_intrline;
335 #endif    /* !YAMON_IRQ_MAP_BAD */
336           return (0);
337 }
338 
339 static const char *
malta_pci_intr_string(void * v,pci_intr_handle_t irq,char * buf,size_t len)340 malta_pci_intr_string(void *v, pci_intr_handle_t irq, char *buf, size_t len)
341 {
342 
343           return isa_intr_string(pcib_ic, irq, buf, len);
344 }
345 
346 static const struct evcnt *
malta_pci_intr_evcnt(void * v,pci_intr_handle_t irq)347 malta_pci_intr_evcnt(void *v, pci_intr_handle_t irq)
348 {
349 
350           return (isa_intr_evcnt(pcib_ic, irq));
351 }
352 
353 static void *
malta_pci_intr_establish(void * v,pci_intr_handle_t irq,int level,int (* func)(void *),void * arg)354 malta_pci_intr_establish(void *v, pci_intr_handle_t irq, int level,
355     int (*func)(void *), void *arg)
356 {
357 
358           return (isa_intr_establish(pcib_ic, irq, IST_LEVEL, level, func, arg));
359 }
360 
361 static void
malta_pci_intr_disestablish(void * v,void * arg)362 malta_pci_intr_disestablish(void *v, void *arg)
363 {
364 
365           return (isa_intr_disestablish(pcib_ic, arg));
366 }
367 
368 static void
malta_pci_conf_interrupt(void * v,int bus,int dev,int func,int swiz,int * iline)369 malta_pci_conf_interrupt(void *v, int bus, int dev, int func, int swiz,
370     int *iline)
371 {
372 
373           /*
374            * We actually don't need to do anything; everything is handled
375            * in pci_intr_map().
376            */
377           *iline = 0;
378 }
379 
380 void *
malta_pciide_compat_intr_establish(void * v,device_t dev,const struct pci_attach_args * pa,int chan,int (* func)(void *),void * arg)381 malta_pciide_compat_intr_establish(void *v, device_t dev,
382     const struct pci_attach_args *pa, int chan, int (*func)(void *), void *arg)
383 {
384           pci_chipset_tag_t pc = pa->pa_pc;
385           void *cookie;
386           int bus, irq;
387           char buf[PCI_INTRSTR_LEN];
388 
389           pci_decompose_tag(pc, pa->pa_tag, &bus, NULL, NULL);
390 
391           /*
392            * If this isn't PCI bus #0, all bets are off.
393            */
394           if (bus != 0)
395                     return (NULL);
396 
397           irq = PCIIDE_COMPAT_IRQ(chan);
398           cookie = isa_intr_establish(pcib_ic, irq, IST_EDGE, IPL_BIO, func, arg);
399           if (cookie == NULL)
400                     return (NULL);
401           printf("%s: %s channel interrupting at %s\n", device_xname(dev),
402               PCIIDE_CHANNEL_NAME(chan), malta_pci_intr_string(v, irq, buf, sizeof(buf)));
403           return (cookie);
404 }
405