1 /* $FreeBSD: head/sys/dev/usb/usb_core.h 278071 2015-02-02 11:06:41Z hselasky $ */ 2 /*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 /* 28 * Including this file is mandatory for all USB related c-files in the kernel. 29 */ 30 31 #ifndef _USB_CORE_H_ 32 #define _USB_CORE_H_ 33 34 /* 35 * The following macro will tell if an USB transfer is currently 36 * receiving or transferring data. 37 */ 38 #define USB_GET_DATA_ISREAD(xfer) ((xfer)->flags_int.usb_mode == \ 39 USB_MODE_DEVICE ? (((xfer)->endpointno & UE_DIR_IN) ? 0 : 1) : \ 40 (((xfer)->endpointno & UE_DIR_IN) ? 1 : 0)) 41 42 /* macros */ 43 44 #define USB_BUS_LOCK(_b) lockmgr(&(_b)->bus_lock, LK_EXCLUSIVE) 45 #define USB_BUS_UNLOCK(_b) lockmgr(&(_b)->bus_lock, LK_RELEASE) 46 #define USB_BUS_LOCK_ASSERT(_b) KKASSERT(lockowned(&(_b)->bus_lock)) 47 #define USB_BUS_LOCK_ASSERT_NOTOWNED(_b) KKASSERT(!lockowned(&(_b)->bus_lock)) 48 #define USB_XFER_LOCK(_x) lockmgr((_x)->xroot->xfer_lock, LK_EXCLUSIVE) 49 #define USB_XFER_UNLOCK(_x) lockmgr((_x)->xroot->xfer_lock, LK_RELEASE) 50 #define USB_XFER_LOCK_ASSERT(_x) KKASSERT(lockowned((_x)->xroot->xfer_lock)) 51 #define USB_XFER_LOCK_ASSERT_NOTOWNED(_x) KKASSERT(!lockowned((_x)->xroot->xfer_lock)) 52 53 /* helper for converting pointers to integers */ 54 #define USB_P2U(ptr) \ 55 (((const uint8_t *)(ptr)) - ((const uint8_t *)0)) 56 57 /* helper for computing offsets */ 58 #define USB_ADD_BYTES(ptr,size) \ 59 ((void *)(USB_P2U(ptr) + (size))) 60 61 /* debug macro */ 62 #define USB_ASSERT KASSERT 63 64 /* structure prototypes */ 65 66 struct file; 67 struct usb_bus; 68 struct usb_device; 69 struct usb_device_request; 70 struct usb_page; 71 struct usb_page_cache; 72 struct usb_xfer; 73 struct usb_xfer_root; 74 struct usb_string_lang; 75 76 /* typedefs */ 77 78 /* structures */ 79 80 /* 81 * The following structure defines a set of internal USB transfer 82 * flags. 83 */ 84 struct usb_xfer_flags_int { 85 86 enum usb_hc_mode usb_mode; /* shadow copy of "udev->usb_mode" */ 87 uint16_t control_rem; /* remainder in bytes */ 88 89 uint8_t open:1; /* set if USB pipe has been opened */ 90 uint8_t transferring:1; /* set if an USB transfer is in 91 * progress */ 92 uint8_t did_dma_delay:1; /* set if we waited for HW DMA */ 93 uint8_t did_close:1; /* set if we closed the USB transfer */ 94 uint8_t draining:1; /* set if we are draining an USB 95 * transfer */ 96 uint8_t started:1; /* keeps track of started or stopped */ 97 uint8_t bandwidth_reclaimed:1; 98 uint8_t control_xfr:1; /* set if control transfer */ 99 uint8_t control_hdr:1; /* set if control header should be 100 * sent */ 101 uint8_t control_act:1; /* set if control transfer is active */ 102 uint8_t control_stall:1; /* set if control transfer should be stalled */ 103 uint8_t control_did_data:1; /* set if control DATA has been transferred */ 104 105 uint8_t short_frames_ok:1; /* filtered version */ 106 uint8_t short_xfer_ok:1; /* filtered version */ 107 #if USB_HAVE_BUSDMA 108 uint8_t bdma_enable:1; /* filtered version (only set if 109 * hardware supports DMA) */ 110 uint8_t bdma_no_post_sync:1; /* set if the USB callback wrapper 111 * should not do the BUS-DMA post sync 112 * operation */ 113 uint8_t bdma_setup:1; /* set if BUS-DMA has been setup */ 114 #endif 115 uint8_t isochronous_xfr:1; /* set if isochronous transfer */ 116 uint8_t curr_dma_set:1; /* used by USB HC/DC driver */ 117 uint8_t can_cancel_immed:1; /* set if USB transfer can be 118 * cancelled immediately */ 119 uint8_t doing_callback:1; /* set if executing the callback */ 120 uint8_t maxp_was_clamped:1; /* set if the max packet size 121 * was outside its allowed range */ 122 uint8_t onhwqueue:1; /* on a hardware queue */ 123 uint8_t doorbell_wait:1; /* structure being reused */ 124 }; 125 126 /* 127 * The following structure defines an USB transfer. 128 */ 129 struct usb_xfer { 130 struct usb_callout timeout_handle; 131 TAILQ_ENTRY(usb_xfer) wait_entry; /* used at various places */ 132 133 struct usb_page_cache *buf_fixup; /* fixup buffer(s) */ 134 struct usb_xfer_queue *wait_queue; /* pointer to queue that we 135 * are waiting on */ 136 struct usb_page *dma_page_ptr; 137 struct usb_endpoint *endpoint; /* our USB endpoint */ 138 struct usb_xfer_root *xroot; /* used by HC driver */ 139 void *qh_start[2]; /* used by HC driver */ 140 void *td_start[2]; /* used by HC driver */ 141 void *td_transfer_first; /* used by HC driver */ 142 void *td_transfer_last; /* used by HC driver */ 143 void *td_transfer_cache; /* used by HC driver */ 144 void *priv_sc; /* device driver data pointer 1 */ 145 void *priv_fifo; /* device driver data pointer 2 */ 146 void *local_buffer; 147 usb_frlength_t *frlengths; 148 struct usb_page_cache *frbuffers; 149 usb_callback_t *callback; 150 151 usb_frlength_t max_hc_frame_size; 152 usb_frlength_t max_data_length; 153 usb_frlength_t sumlen; /* sum of all lengths in bytes */ 154 usb_frlength_t actlen; /* actual length in bytes */ 155 usb_timeout_t timeout; /* milliseconds */ 156 157 usb_frcount_t max_frame_count; /* initial value of "nframes" after 158 * setup */ 159 usb_frcount_t nframes; /* number of USB frames to transfer */ 160 usb_frcount_t aframes; /* actual number of USB frames 161 * transferred */ 162 usb_stream_t stream_id; /* USB3.0 specific field */ 163 164 uint16_t max_packet_size; 165 uint16_t max_frame_size; 166 uint16_t qh_pos; 167 uint16_t isoc_time_complete; /* in ms */ 168 usb_timeout_t interval; /* milliseconds */ 169 170 uint8_t address; /* physical USB address */ 171 uint8_t endpointno; /* physical USB endpoint */ 172 uint8_t max_packet_count; 173 uint8_t usb_state; 174 uint8_t fps_shift; /* down shift of FPS, 0..3 */ 175 176 int doorbell_match; 177 178 usb_error_t error; 179 180 struct usb_xfer_flags flags; 181 struct usb_xfer_flags_int flags_int; 182 }; 183 184 /* external variables */ 185 186 extern struct lock usb_ref_lock; 187 extern const struct usb_string_lang usb_string_lang_en; 188 189 /* typedefs */ 190 191 typedef struct malloc_type *usb_malloc_type; 192 193 /* prototypes */ 194 195 #endif /* _USB_CORE_H_ */ 196