1 /*-
2  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3  * Copyright (c) 2010-2011 Juniper Networks, Inc.
4  * All rights reserved.
5  *
6  * Portions of this software were developed by Robert N. M. Watson under
7  * contract to Juniper Networks, Inc.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 3. Neither the name of the project nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  *	$KAME: in6_pcb.c,v 1.31 2001/05/21 05:45:10 jinmei Exp $
34  */
35 
36 /*-
37  * Copyright (c) 1982, 1986, 1991, 1993
38  *	The Regents of the University of California.  All rights reserved.
39  *
40  * Redistribution and use in source and binary forms, with or without
41  * modification, are permitted provided that the following conditions
42  * are met:
43  * 1. Redistributions of source code must retain the above copyright
44  *    notice, this list of conditions and the following disclaimer.
45  * 2. Redistributions in binary form must reproduce the above copyright
46  *    notice, this list of conditions and the following disclaimer in the
47  *    documentation and/or other materials provided with the distribution.
48  * 4. Neither the name of the University nor the names of its contributors
49  *    may be used to endorse or promote products derived from this software
50  *    without specific prior written permission.
51  *
52  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
53  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
54  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
55  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
56  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
57  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
58  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
59  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
60  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
61  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
62  * SUCH DAMAGE.
63  *
64  *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
65  */
66 
67 #include <sys/cdefs.h>
68 __FBSDID("$FreeBSD: stable/9/sys/netinet6/in6_pcb.c 279912 2015-03-12 09:16:50Z ae $");
69 
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
72 #include "opt_ipsec.h"
73 #include "opt_pcbgroup.h"
74 
75 #include <sys/param.h>
76 #include <sys/systm.h>
77 #include <sys/malloc.h>
78 #include <sys/mbuf.h>
79 #include <sys/domain.h>
80 #include <sys/protosw.h>
81 #include <sys/socket.h>
82 #include <sys/socketvar.h>
83 #include <sys/sockio.h>
84 #include <sys/errno.h>
85 #include <sys/time.h>
86 #include <sys/priv.h>
87 #include <sys/proc.h>
88 #include <sys/jail.h>
89 
90 #include <vm/uma.h>
91 
92 #include <net/if.h>
93 #include <net/if_types.h>
94 #include <net/route.h>
95 
96 #include <netinet/in.h>
97 #include <netinet/in_var.h>
98 #include <netinet/in_systm.h>
99 #include <netinet/tcp_var.h>
100 #include <netinet/ip6.h>
101 #include <netinet/ip_var.h>
102 
103 #include <netinet6/ip6_var.h>
104 #include <netinet6/nd6.h>
105 #include <netinet/in_pcb.h>
106 #include <netinet6/in6_pcb.h>
107 #include <netinet6/scope6_var.h>
108 
109 struct	in6_addr zeroin6_addr;
110 
111 int
in6_pcbbind(register struct inpcb * inp,struct sockaddr * nam,struct ucred * cred)112 in6_pcbbind(register struct inpcb *inp, struct sockaddr *nam,
113     struct ucred *cred)
114 {
115 	struct socket *so = inp->inp_socket;
116 	struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)NULL;
117 	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
118 	u_short	lport = 0;
119 	int error, lookupflags = 0;
120 	int reuseport = (so->so_options & SO_REUSEPORT);
121 
122 	INP_WLOCK_ASSERT(inp);
123 	INP_HASH_WLOCK_ASSERT(pcbinfo);
124 
125 	if (TAILQ_EMPTY(&V_in6_ifaddrhead))	/* XXX broken! */
126 		return (EADDRNOTAVAIL);
127 	if (inp->inp_lport || !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
128 		return (EINVAL);
129 	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
130 		lookupflags = INPLOOKUP_WILDCARD;
131 	if (nam == NULL) {
132 		if ((error = prison_local_ip6(cred, &inp->in6p_laddr,
133 		    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
134 			return (error);
135 	} else {
136 		sin6 = (struct sockaddr_in6 *)nam;
137 		if (nam->sa_len != sizeof(*sin6))
138 			return (EINVAL);
139 		/*
140 		 * family check.
141 		 */
142 		if (nam->sa_family != AF_INET6)
143 			return (EAFNOSUPPORT);
144 
145 		if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
146 			return(error);
147 
148 		if ((error = prison_local_ip6(cred, &sin6->sin6_addr,
149 		    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
150 			return (error);
151 
152 		lport = sin6->sin6_port;
153 		if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
154 			/*
155 			 * Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
156 			 * allow compepte duplication of binding if
157 			 * SO_REUSEPORT is set, or if SO_REUSEADDR is set
158 			 * and a multicast address is bound on both
159 			 * new and duplicated sockets.
160 			 */
161 			if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) != 0)
162 				reuseport = SO_REUSEADDR|SO_REUSEPORT;
163 		} else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
164 			struct ifaddr *ifa;
165 
166 			sin6->sin6_port = 0;		/* yech... */
167 			if ((ifa = ifa_ifwithaddr((struct sockaddr *)sin6)) ==
168 			    NULL &&
169 			    (inp->inp_flags & INP_BINDANY) == 0) {
170 				return (EADDRNOTAVAIL);
171 			}
172 
173 			/*
174 			 * XXX: bind to an anycast address might accidentally
175 			 * cause sending a packet with anycast source address.
176 			 * We should allow to bind to a deprecated address, since
177 			 * the application dares to use it.
178 			 */
179 			if (ifa != NULL &&
180 			    ((struct in6_ifaddr *)ifa)->ia6_flags &
181 			    (IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|IN6_IFF_DETACHED)) {
182 				ifa_free(ifa);
183 				return (EADDRNOTAVAIL);
184 			}
185 			if (ifa != NULL)
186 				ifa_free(ifa);
187 		}
188 		if (lport) {
189 			struct inpcb *t;
190 			struct tcptw *tw;
191 
192 			/* GROSS */
193 			if (ntohs(lport) <= V_ipport_reservedhigh &&
194 			    ntohs(lport) >= V_ipport_reservedlow &&
195 			    priv_check_cred(cred, PRIV_NETINET_RESERVEDPORT,
196 			    0))
197 				return (EACCES);
198 			if (!IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr) &&
199 			    priv_check_cred(inp->inp_cred,
200 			    PRIV_NETINET_REUSEPORT, 0) != 0) {
201 				t = in6_pcblookup_local(pcbinfo,
202 				    &sin6->sin6_addr, lport,
203 				    INPLOOKUP_WILDCARD, cred);
204 				if (t &&
205 				    ((t->inp_flags & INP_TIMEWAIT) == 0) &&
206 				    (so->so_type != SOCK_STREAM ||
207 				     IN6_IS_ADDR_UNSPECIFIED(&t->in6p_faddr)) &&
208 				    (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr) ||
209 				     !IN6_IS_ADDR_UNSPECIFIED(&t->in6p_laddr) ||
210 				     (t->inp_flags2 & INP_REUSEPORT) == 0) &&
211 				    (inp->inp_cred->cr_uid !=
212 				     t->inp_cred->cr_uid))
213 					return (EADDRINUSE);
214 #ifdef INET
215 				if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
216 				    IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
217 					struct sockaddr_in sin;
218 
219 					in6_sin6_2_sin(&sin, sin6);
220 					t = in_pcblookup_local(pcbinfo,
221 					    sin.sin_addr, lport,
222 					    INPLOOKUP_WILDCARD, cred);
223 					if (t &&
224 					    ((t->inp_flags &
225 					      INP_TIMEWAIT) == 0) &&
226 					    (so->so_type != SOCK_STREAM ||
227 					     ntohl(t->inp_faddr.s_addr) ==
228 					      INADDR_ANY) &&
229 					    (inp->inp_cred->cr_uid !=
230 					     t->inp_cred->cr_uid))
231 						return (EADDRINUSE);
232 				}
233 #endif
234 			}
235 			t = in6_pcblookup_local(pcbinfo, &sin6->sin6_addr,
236 			    lport, lookupflags, cred);
237 			if (t && (t->inp_flags & INP_TIMEWAIT)) {
238 				/*
239 				 * XXXRW: If an incpb has had its timewait
240 				 * state recycled, we treat the address as
241 				 * being in use (for now).  This is better
242 				 * than a panic, but not desirable.
243 				 */
244 				tw = intotw(t);
245 				if (tw == NULL ||
246 				    (reuseport & tw->tw_so_options) == 0)
247 					return (EADDRINUSE);
248 			} else if (t && (reuseport & inp_so_options(t)) == 0) {
249 				return (EADDRINUSE);
250 			}
251 #ifdef INET
252 			if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
253 			    IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
254 				struct sockaddr_in sin;
255 
256 				in6_sin6_2_sin(&sin, sin6);
257 				t = in_pcblookup_local(pcbinfo, sin.sin_addr,
258 				    lport, lookupflags, cred);
259 				if (t && t->inp_flags & INP_TIMEWAIT) {
260 					tw = intotw(t);
261 					if (tw == NULL)
262 						return (EADDRINUSE);
263 					if ((reuseport & tw->tw_so_options) == 0
264 					    && (ntohl(t->inp_laddr.s_addr) !=
265 					     INADDR_ANY || ((inp->inp_vflag &
266 					     INP_IPV6PROTO) ==
267 					     (t->inp_vflag & INP_IPV6PROTO))))
268 						return (EADDRINUSE);
269 				} else if (t &&
270 				    (reuseport & inp_so_options(t)) == 0 &&
271 				    (ntohl(t->inp_laddr.s_addr) != INADDR_ANY ||
272 				    (t->inp_vflag & INP_IPV6PROTO) != 0))
273 					return (EADDRINUSE);
274 			}
275 #endif
276 		}
277 		inp->in6p_laddr = sin6->sin6_addr;
278 	}
279 	if (lport == 0) {
280 		if ((error = in6_pcbsetport(&inp->in6p_laddr, inp, cred)) != 0) {
281 			/* Undo an address bind that may have occurred. */
282 			inp->in6p_laddr = in6addr_any;
283 			return (error);
284 		}
285 	} else {
286 		inp->inp_lport = lport;
287 		if (in_pcbinshash(inp) != 0) {
288 			inp->in6p_laddr = in6addr_any;
289 			inp->inp_lport = 0;
290 			return (EAGAIN);
291 		}
292 	}
293 	return (0);
294 }
295 
296 /*
297  *   Transform old in6_pcbconnect() into an inner subroutine for new
298  *   in6_pcbconnect(): Do some validity-checking on the remote
299  *   address (in mbuf 'nam') and then determine local host address
300  *   (i.e., which interface) to use to access that remote host.
301  *
302  *   This preserves definition of in6_pcbconnect(), while supporting a
303  *   slightly different version for T/TCP.  (This is more than
304  *   a bit of a kludge, but cleaning up the internal interfaces would
305  *   have forced minor changes in every protocol).
306  */
307 int
in6_pcbladdr(register struct inpcb * inp,struct sockaddr * nam,struct in6_addr * plocal_addr6)308 in6_pcbladdr(register struct inpcb *inp, struct sockaddr *nam,
309     struct in6_addr *plocal_addr6)
310 {
311 	register struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
312 	int error = 0;
313 	struct ifnet *ifp = NULL;
314 	int scope_ambiguous = 0;
315 	struct in6_addr in6a;
316 
317 	INP_WLOCK_ASSERT(inp);
318 	INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);	/* XXXRW: why? */
319 
320 	if (nam->sa_len != sizeof (*sin6))
321 		return (EINVAL);
322 	if (sin6->sin6_family != AF_INET6)
323 		return (EAFNOSUPPORT);
324 	if (sin6->sin6_port == 0)
325 		return (EADDRNOTAVAIL);
326 
327 	if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
328 		scope_ambiguous = 1;
329 	if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
330 		return(error);
331 
332 	if (!TAILQ_EMPTY(&V_in6_ifaddrhead)) {
333 		/*
334 		 * If the destination address is UNSPECIFIED addr,
335 		 * use the loopback addr, e.g ::1.
336 		 */
337 		if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
338 			sin6->sin6_addr = in6addr_loopback;
339 	}
340 	if ((error = prison_remote_ip6(inp->inp_cred, &sin6->sin6_addr)) != 0)
341 		return (error);
342 
343 	error = in6_selectsrc(sin6, inp->in6p_outputopts,
344 	    inp, NULL, inp->inp_cred, &ifp, &in6a);
345 	if (error)
346 		return (error);
347 
348 	if (ifp && scope_ambiguous &&
349 	    (error = in6_setscope(&sin6->sin6_addr, ifp, NULL)) != 0) {
350 		return(error);
351 	}
352 
353 	/*
354 	 * Do not update this earlier, in case we return with an error.
355 	 *
356 	 * XXX: this in6_selectsrc result might replace the bound local
357 	 * address with the address specified by setsockopt(IPV6_PKTINFO).
358 	 * Is it the intended behavior?
359 	 */
360 	*plocal_addr6 = in6a;
361 
362 	/*
363 	 * Don't do pcblookup call here; return interface in
364 	 * plocal_addr6
365 	 * and exit to caller, that will do the lookup.
366 	 */
367 
368 	return (0);
369 }
370 
371 /*
372  * Outer subroutine:
373  * Connect from a socket to a specified address.
374  * Both address and port must be specified in argument sin.
375  * If don't have a local address for this socket yet,
376  * then pick one.
377  */
378 int
in6_pcbconnect_mbuf(register struct inpcb * inp,struct sockaddr * nam,struct ucred * cred,struct mbuf * m)379 in6_pcbconnect_mbuf(register struct inpcb *inp, struct sockaddr *nam,
380     struct ucred *cred, struct mbuf *m)
381 {
382 	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
383 	register struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
384 	struct in6_addr addr6;
385 	int error;
386 
387 	INP_WLOCK_ASSERT(inp);
388 	INP_HASH_WLOCK_ASSERT(pcbinfo);
389 
390 	/*
391 	 * Call inner routine, to assign local interface address.
392 	 * in6_pcbladdr() may automatically fill in sin6_scope_id.
393 	 */
394 	if ((error = in6_pcbladdr(inp, nam, &addr6)) != 0)
395 		return (error);
396 
397 	if (in6_pcblookup_hash_locked(pcbinfo, &sin6->sin6_addr,
398 			       sin6->sin6_port,
399 			      IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)
400 			      ? &addr6 : &inp->in6p_laddr,
401 			      inp->inp_lport, 0, NULL) != NULL) {
402 		return (EADDRINUSE);
403 	}
404 	if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
405 		if (inp->inp_lport == 0) {
406 			error = in6_pcbbind(inp, (struct sockaddr *)0, cred);
407 			if (error)
408 				return (error);
409 		}
410 		inp->in6p_laddr = addr6;
411 	}
412 	inp->in6p_faddr = sin6->sin6_addr;
413 	inp->inp_fport = sin6->sin6_port;
414 	/* update flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
415 	inp->inp_flow &= ~IPV6_FLOWLABEL_MASK;
416 	if (inp->inp_flags & IN6P_AUTOFLOWLABEL)
417 		inp->inp_flow |=
418 		    (htonl(ip6_randomflowlabel()) & IPV6_FLOWLABEL_MASK);
419 
420 	in_pcbrehash_mbuf(inp, m);
421 
422 	return (0);
423 }
424 
425 int
in6_pcbconnect(struct inpcb * inp,struct sockaddr * nam,struct ucred * cred)426 in6_pcbconnect(struct inpcb *inp, struct sockaddr *nam, struct ucred *cred)
427 {
428 
429 	return (in6_pcbconnect_mbuf(inp, nam, cred, NULL));
430 }
431 
432 void
in6_pcbdisconnect(struct inpcb * inp)433 in6_pcbdisconnect(struct inpcb *inp)
434 {
435 
436 	INP_WLOCK_ASSERT(inp);
437 	INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
438 
439 	bzero((caddr_t)&inp->in6p_faddr, sizeof(inp->in6p_faddr));
440 	inp->inp_fport = 0;
441 	/* clear flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
442 	inp->inp_flow &= ~IPV6_FLOWLABEL_MASK;
443 	in_pcbrehash(inp);
444 }
445 
446 struct sockaddr *
in6_sockaddr(in_port_t port,struct in6_addr * addr_p)447 in6_sockaddr(in_port_t port, struct in6_addr *addr_p)
448 {
449 	struct sockaddr_in6 *sin6;
450 
451 	sin6 = malloc(sizeof *sin6, M_SONAME, M_WAITOK);
452 	bzero(sin6, sizeof *sin6);
453 	sin6->sin6_family = AF_INET6;
454 	sin6->sin6_len = sizeof(*sin6);
455 	sin6->sin6_port = port;
456 	sin6->sin6_addr = *addr_p;
457 	(void)sa6_recoverscope(sin6); /* XXX: should catch errors */
458 
459 	return (struct sockaddr *)sin6;
460 }
461 
462 struct sockaddr *
in6_v4mapsin6_sockaddr(in_port_t port,struct in_addr * addr_p)463 in6_v4mapsin6_sockaddr(in_port_t port, struct in_addr *addr_p)
464 {
465 	struct sockaddr_in sin;
466 	struct sockaddr_in6 *sin6_p;
467 
468 	bzero(&sin, sizeof sin);
469 	sin.sin_family = AF_INET;
470 	sin.sin_len = sizeof(sin);
471 	sin.sin_port = port;
472 	sin.sin_addr = *addr_p;
473 
474 	sin6_p = malloc(sizeof *sin6_p, M_SONAME,
475 		M_WAITOK);
476 	in6_sin_2_v4mapsin6(&sin, sin6_p);
477 
478 	return (struct sockaddr *)sin6_p;
479 }
480 
481 int
in6_getsockaddr(struct socket * so,struct sockaddr ** nam)482 in6_getsockaddr(struct socket *so, struct sockaddr **nam)
483 {
484 	register struct inpcb *inp;
485 	struct in6_addr addr;
486 	in_port_t port;
487 
488 	inp = sotoinpcb(so);
489 	KASSERT(inp != NULL, ("in6_getsockaddr: inp == NULL"));
490 
491 	INP_RLOCK(inp);
492 	port = inp->inp_lport;
493 	addr = inp->in6p_laddr;
494 	INP_RUNLOCK(inp);
495 
496 	*nam = in6_sockaddr(port, &addr);
497 	return 0;
498 }
499 
500 int
in6_getpeeraddr(struct socket * so,struct sockaddr ** nam)501 in6_getpeeraddr(struct socket *so, struct sockaddr **nam)
502 {
503 	struct inpcb *inp;
504 	struct in6_addr addr;
505 	in_port_t port;
506 
507 	inp = sotoinpcb(so);
508 	KASSERT(inp != NULL, ("in6_getpeeraddr: inp == NULL"));
509 
510 	INP_RLOCK(inp);
511 	port = inp->inp_fport;
512 	addr = inp->in6p_faddr;
513 	INP_RUNLOCK(inp);
514 
515 	*nam = in6_sockaddr(port, &addr);
516 	return 0;
517 }
518 
519 int
in6_mapped_sockaddr(struct socket * so,struct sockaddr ** nam)520 in6_mapped_sockaddr(struct socket *so, struct sockaddr **nam)
521 {
522 	struct	inpcb *inp;
523 	int	error;
524 
525 	inp = sotoinpcb(so);
526 	KASSERT(inp != NULL, ("in6_mapped_sockaddr: inp == NULL"));
527 
528 #ifdef INET
529 	if ((inp->inp_vflag & (INP_IPV4 | INP_IPV6)) == INP_IPV4) {
530 		error = in_getsockaddr(so, nam);
531 		if (error == 0)
532 			in6_sin_2_v4mapsin6_in_sock(nam);
533 	} else
534 #endif
535 	{
536 		/* scope issues will be handled in in6_getsockaddr(). */
537 		error = in6_getsockaddr(so, nam);
538 	}
539 
540 	return error;
541 }
542 
543 int
in6_mapped_peeraddr(struct socket * so,struct sockaddr ** nam)544 in6_mapped_peeraddr(struct socket *so, struct sockaddr **nam)
545 {
546 	struct	inpcb *inp;
547 	int	error;
548 
549 	inp = sotoinpcb(so);
550 	KASSERT(inp != NULL, ("in6_mapped_peeraddr: inp == NULL"));
551 
552 #ifdef INET
553 	if ((inp->inp_vflag & (INP_IPV4 | INP_IPV6)) == INP_IPV4) {
554 		error = in_getpeeraddr(so, nam);
555 		if (error == 0)
556 			in6_sin_2_v4mapsin6_in_sock(nam);
557 	} else
558 #endif
559 	/* scope issues will be handled in in6_getpeeraddr(). */
560 	error = in6_getpeeraddr(so, nam);
561 
562 	return error;
563 }
564 
565 /*
566  * Pass some notification to all connections of a protocol
567  * associated with address dst.  The local address and/or port numbers
568  * may be specified to limit the search.  The "usual action" will be
569  * taken, depending on the ctlinput cmd.  The caller must filter any
570  * cmds that are uninteresting (e.g., no error in the map).
571  * Call the protocol specific routine (if any) to report
572  * any errors for each matching socket.
573  */
574 void
in6_pcbnotify(struct inpcbinfo * pcbinfo,struct sockaddr * dst,u_int fport_arg,const struct sockaddr * src,u_int lport_arg,int cmd,void * cmdarg,struct inpcb * (* notify)(struct inpcb *,int))575 in6_pcbnotify(struct inpcbinfo *pcbinfo, struct sockaddr *dst,
576     u_int fport_arg, const struct sockaddr *src, u_int lport_arg,
577     int cmd, void *cmdarg,
578     struct inpcb *(*notify)(struct inpcb *, int))
579 {
580 	struct inpcb *inp, *inp_temp;
581 	struct sockaddr_in6 sa6_src, *sa6_dst;
582 	u_short	fport = fport_arg, lport = lport_arg;
583 	u_int32_t flowinfo;
584 	int errno;
585 
586 	if ((unsigned)cmd >= PRC_NCMDS || dst->sa_family != AF_INET6)
587 		return;
588 
589 	sa6_dst = (struct sockaddr_in6 *)dst;
590 	if (IN6_IS_ADDR_UNSPECIFIED(&sa6_dst->sin6_addr))
591 		return;
592 
593 	/*
594 	 * note that src can be NULL when we get notify by local fragmentation.
595 	 */
596 	sa6_src = (src == NULL) ? sa6_any : *(const struct sockaddr_in6 *)src;
597 	flowinfo = sa6_src.sin6_flowinfo;
598 
599 	/*
600 	 * Redirects go to all references to the destination,
601 	 * and use in6_rtchange to invalidate the route cache.
602 	 * Dead host indications: also use in6_rtchange to invalidate
603 	 * the cache, and deliver the error to all the sockets.
604 	 * Otherwise, if we have knowledge of the local port and address,
605 	 * deliver only to that socket.
606 	 */
607 	if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
608 		fport = 0;
609 		lport = 0;
610 		bzero((caddr_t)&sa6_src.sin6_addr, sizeof(sa6_src.sin6_addr));
611 
612 		if (cmd != PRC_HOSTDEAD)
613 			notify = in6_rtchange;
614 	}
615 	errno = inet6ctlerrmap[cmd];
616 	INP_INFO_WLOCK(pcbinfo);
617 	LIST_FOREACH_SAFE(inp, pcbinfo->ipi_listhead, inp_list, inp_temp) {
618 		INP_WLOCK(inp);
619 		if ((inp->inp_vflag & INP_IPV6) == 0) {
620 			INP_WUNLOCK(inp);
621 			continue;
622 		}
623 
624 		/*
625 		 * If the error designates a new path MTU for a destination
626 		 * and the application (associated with this socket) wanted to
627 		 * know the value, notify.
628 		 * XXX: should we avoid to notify the value to TCP sockets?
629 		 */
630 		if (cmd == PRC_MSGSIZE && cmdarg != NULL)
631 			ip6_notify_pmtu(inp, (struct sockaddr_in6 *)dst,
632 					*(u_int32_t *)cmdarg);
633 
634 		/*
635 		 * Detect if we should notify the error. If no source and
636 		 * destination ports are specifed, but non-zero flowinfo and
637 		 * local address match, notify the error. This is the case
638 		 * when the error is delivered with an encrypted buffer
639 		 * by ESP. Otherwise, just compare addresses and ports
640 		 * as usual.
641 		 */
642 		if (lport == 0 && fport == 0 && flowinfo &&
643 		    inp->inp_socket != NULL &&
644 		    flowinfo == (inp->inp_flow & IPV6_FLOWLABEL_MASK) &&
645 		    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, &sa6_src.sin6_addr))
646 			goto do_notify;
647 		else if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
648 					     &sa6_dst->sin6_addr) ||
649 			 inp->inp_socket == 0 ||
650 			 (lport && inp->inp_lport != lport) ||
651 			 (!IN6_IS_ADDR_UNSPECIFIED(&sa6_src.sin6_addr) &&
652 			  !IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
653 					      &sa6_src.sin6_addr)) ||
654 			 (fport && inp->inp_fport != fport)) {
655 			INP_WUNLOCK(inp);
656 			continue;
657 		}
658 
659 	  do_notify:
660 		if (notify) {
661 			if ((*notify)(inp, errno))
662 				INP_WUNLOCK(inp);
663 		} else
664 			INP_WUNLOCK(inp);
665 	}
666 	INP_INFO_WUNLOCK(pcbinfo);
667 }
668 
669 /*
670  * Lookup a PCB based on the local address and port.  Caller must hold the
671  * hash lock.  No inpcb locks or references are acquired.
672  */
673 struct inpcb *
in6_pcblookup_local(struct inpcbinfo * pcbinfo,struct in6_addr * laddr,u_short lport,int lookupflags,struct ucred * cred)674 in6_pcblookup_local(struct inpcbinfo *pcbinfo, struct in6_addr *laddr,
675     u_short lport, int lookupflags, struct ucred *cred)
676 {
677 	register struct inpcb *inp;
678 	int matchwild = 3, wildcard;
679 
680 	KASSERT((lookupflags & ~(INPLOOKUP_WILDCARD)) == 0,
681 	    ("%s: invalid lookup flags %d", __func__, lookupflags));
682 
683 	INP_HASH_WLOCK_ASSERT(pcbinfo);
684 
685 	if ((lookupflags & INPLOOKUP_WILDCARD) == 0) {
686 		struct inpcbhead *head;
687 		/*
688 		 * Look for an unconnected (wildcard foreign addr) PCB that
689 		 * matches the local address and port we're looking for.
690 		 */
691 		head = &pcbinfo->ipi_hashbase[INP_PCBHASH(INADDR_ANY, lport,
692 		    0, pcbinfo->ipi_hashmask)];
693 		LIST_FOREACH(inp, head, inp_hash) {
694 			/* XXX inp locking */
695 			if ((inp->inp_vflag & INP_IPV6) == 0)
696 				continue;
697 			if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
698 			    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
699 			    inp->inp_lport == lport) {
700 				/* Found. */
701 				if (cred == NULL ||
702 				    prison_equal_ip6(cred->cr_prison,
703 					inp->inp_cred->cr_prison))
704 					return (inp);
705 			}
706 		}
707 		/*
708 		 * Not found.
709 		 */
710 		return (NULL);
711 	} else {
712 		struct inpcbporthead *porthash;
713 		struct inpcbport *phd;
714 		struct inpcb *match = NULL;
715 		/*
716 		 * Best fit PCB lookup.
717 		 *
718 		 * First see if this local port is in use by looking on the
719 		 * port hash list.
720 		 */
721 		porthash = &pcbinfo->ipi_porthashbase[INP_PCBPORTHASH(lport,
722 		    pcbinfo->ipi_porthashmask)];
723 		LIST_FOREACH(phd, porthash, phd_hash) {
724 			if (phd->phd_port == lport)
725 				break;
726 		}
727 		if (phd != NULL) {
728 			/*
729 			 * Port is in use by one or more PCBs. Look for best
730 			 * fit.
731 			 */
732 			LIST_FOREACH(inp, &phd->phd_pcblist, inp_portlist) {
733 				wildcard = 0;
734 				if (cred != NULL &&
735 				    !prison_equal_ip6(cred->cr_prison,
736 					inp->inp_cred->cr_prison))
737 					continue;
738 				/* XXX inp locking */
739 				if ((inp->inp_vflag & INP_IPV6) == 0)
740 					continue;
741 				if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr))
742 					wildcard++;
743 				if (!IN6_IS_ADDR_UNSPECIFIED(
744 					&inp->in6p_laddr)) {
745 					if (IN6_IS_ADDR_UNSPECIFIED(laddr))
746 						wildcard++;
747 					else if (!IN6_ARE_ADDR_EQUAL(
748 					    &inp->in6p_laddr, laddr))
749 						continue;
750 				} else {
751 					if (!IN6_IS_ADDR_UNSPECIFIED(laddr))
752 						wildcard++;
753 				}
754 				if (wildcard < matchwild) {
755 					match = inp;
756 					matchwild = wildcard;
757 					if (matchwild == 0)
758 						break;
759 				}
760 			}
761 		}
762 		return (match);
763 	}
764 }
765 
766 void
in6_pcbpurgeif0(struct inpcbinfo * pcbinfo,struct ifnet * ifp)767 in6_pcbpurgeif0(struct inpcbinfo *pcbinfo, struct ifnet *ifp)
768 {
769 	struct inpcb *in6p;
770 	struct ip6_moptions *im6o;
771 	int i, gap;
772 
773 	INP_INFO_RLOCK(pcbinfo);
774 	LIST_FOREACH(in6p, pcbinfo->ipi_listhead, inp_list) {
775 		INP_WLOCK(in6p);
776 		im6o = in6p->in6p_moptions;
777 		if ((in6p->inp_vflag & INP_IPV6) && im6o != NULL) {
778 			/*
779 			 * Unselect the outgoing ifp for multicast if it
780 			 * is being detached.
781 			 */
782 			if (im6o->im6o_multicast_ifp == ifp)
783 				im6o->im6o_multicast_ifp = NULL;
784 			/*
785 			 * Drop multicast group membership if we joined
786 			 * through the interface being detached.
787 			 */
788 			gap = 0;
789 			for (i = 0; i < im6o->im6o_num_memberships; i++) {
790 				if (im6o->im6o_membership[i]->in6m_ifp ==
791 				    ifp) {
792 					in6_mc_leave(im6o->im6o_membership[i],
793 					    NULL);
794 					gap++;
795 				} else if (gap != 0) {
796 					im6o->im6o_membership[i - gap] =
797 					    im6o->im6o_membership[i];
798 				}
799 			}
800 			im6o->im6o_num_memberships -= gap;
801 		}
802 		INP_WUNLOCK(in6p);
803 	}
804 	INP_INFO_RUNLOCK(pcbinfo);
805 }
806 
807 /*
808  * Check for alternatives when higher level complains
809  * about service problems.  For now, invalidate cached
810  * routing information.  If the route was created dynamically
811  * (by a redirect), time to try a default gateway again.
812  */
813 void
in6_losing(struct inpcb * in6p)814 in6_losing(struct inpcb *in6p)
815 {
816 
817 	/*
818 	 * We don't store route pointers in the routing table anymore
819 	 */
820 	return;
821 }
822 
823 /*
824  * After a routing change, flush old routing
825  * and allocate a (hopefully) better one.
826  */
827 struct inpcb *
in6_rtchange(struct inpcb * inp,int errno)828 in6_rtchange(struct inpcb *inp, int errno)
829 {
830 	/*
831 	 * We don't store route pointers in the routing table anymore
832 	 */
833 	return inp;
834 }
835 
836 #ifdef PCBGROUP
837 /*
838  * Lookup PCB in hash list, using pcbgroup tables.
839  */
840 static struct inpcb *
in6_pcblookup_group(struct inpcbinfo * pcbinfo,struct inpcbgroup * pcbgroup,struct in6_addr * faddr,u_int fport_arg,struct in6_addr * laddr,u_int lport_arg,int lookupflags,struct ifnet * ifp)841 in6_pcblookup_group(struct inpcbinfo *pcbinfo, struct inpcbgroup *pcbgroup,
842     struct in6_addr *faddr, u_int fport_arg, struct in6_addr *laddr,
843     u_int lport_arg, int lookupflags, struct ifnet *ifp)
844 {
845 	struct inpcbhead *head;
846 	struct inpcb *inp, *tmpinp;
847 	u_short fport = fport_arg, lport = lport_arg;
848 	int faith;
849 
850 	if (faithprefix_p != NULL)
851 		faith = (*faithprefix_p)(laddr);
852 	else
853 		faith = 0;
854 
855 	/*
856 	 * First look for an exact match.
857 	 */
858 	tmpinp = NULL;
859 	INP_GROUP_LOCK(pcbgroup);
860 	head = &pcbgroup->ipg_hashbase[
861 	    INP_PCBHASH(faddr->s6_addr32[3] /* XXX */, lport, fport,
862 	    pcbgroup->ipg_hashmask)];
863 	LIST_FOREACH(inp, head, inp_pcbgrouphash) {
864 		/* XXX inp locking */
865 		if ((inp->inp_vflag & INP_IPV6) == 0)
866 			continue;
867 		if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
868 		    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
869 		    inp->inp_fport == fport &&
870 		    inp->inp_lport == lport) {
871 			/*
872 			 * XXX We should be able to directly return
873 			 * the inp here, without any checks.
874 			 * Well unless both bound with SO_REUSEPORT?
875 			 */
876 			if (prison_flag(inp->inp_cred, PR_IP6))
877 				goto found;
878 			if (tmpinp == NULL)
879 				tmpinp = inp;
880 		}
881 	}
882 	if (tmpinp != NULL) {
883 		inp = tmpinp;
884 		goto found;
885 	}
886 
887 	/*
888 	 * Then look for a wildcard match, if requested.
889 	 */
890 	if ((lookupflags & INPLOOKUP_WILDCARD) != 0) {
891 		struct inpcb *local_wild = NULL, *local_exact = NULL;
892 		struct inpcb *jail_wild = NULL;
893 		int injail;
894 
895 		/*
896 		 * Order of socket selection - we always prefer jails.
897 		 *      1. jailed, non-wild.
898 		 *      2. jailed, wild.
899 		 *      3. non-jailed, non-wild.
900 		 *      4. non-jailed, wild.
901 		 */
902 		head = &pcbinfo->ipi_wildbase[INP_PCBHASH(INADDR_ANY, lport,
903 		    0, pcbinfo->ipi_wildmask)];
904 		LIST_FOREACH(inp, head, inp_pcbgroup_wild) {
905 			/* XXX inp locking */
906 			if ((inp->inp_vflag & INP_IPV6) == 0)
907 				continue;
908 
909 			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
910 			    inp->inp_lport != lport) {
911 				continue;
912 			}
913 
914 			/* XXX inp locking */
915 			if (faith && (inp->inp_flags & INP_FAITH) == 0)
916 				continue;
917 
918 			injail = prison_flag(inp->inp_cred, PR_IP6);
919 			if (injail) {
920 				if (prison_check_ip6(inp->inp_cred,
921 				    laddr) != 0)
922 					continue;
923 			} else {
924 				if (local_exact != NULL)
925 					continue;
926 			}
927 
928 			if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr)) {
929 				if (injail)
930 					goto found;
931 				else
932 					local_exact = inp;
933 			} else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
934 				if (injail)
935 					jail_wild = inp;
936 				else
937 					local_wild = inp;
938 			}
939 		} /* LIST_FOREACH */
940 
941 		inp = jail_wild;
942 		if (inp == NULL)
943 			inp = jail_wild;
944 		if (inp == NULL)
945 			inp = local_exact;
946 		if (inp == NULL)
947 			inp = local_wild;
948 		if (inp != NULL)
949 			goto found;
950 	} /* if ((lookupflags & INPLOOKUP_WILDCARD) != 0) */
951 	INP_GROUP_UNLOCK(pcbgroup);
952 	return (NULL);
953 
954 found:
955 	in_pcbref(inp);
956 	INP_GROUP_UNLOCK(pcbgroup);
957 	if (lookupflags & INPLOOKUP_WLOCKPCB) {
958 		INP_WLOCK(inp);
959 		if (in_pcbrele_wlocked(inp))
960 			return (NULL);
961 	} else if (lookupflags & INPLOOKUP_RLOCKPCB) {
962 		INP_RLOCK(inp);
963 		if (in_pcbrele_rlocked(inp))
964 			return (NULL);
965 	} else
966 		panic("%s: locking buf", __func__);
967 	return (inp);
968 }
969 #endif /* PCBGROUP */
970 
971 /*
972  * Lookup PCB in hash list.
973  */
974 struct inpcb *
in6_pcblookup_hash_locked(struct inpcbinfo * pcbinfo,struct in6_addr * faddr,u_int fport_arg,struct in6_addr * laddr,u_int lport_arg,int lookupflags,struct ifnet * ifp)975 in6_pcblookup_hash_locked(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
976     u_int fport_arg, struct in6_addr *laddr, u_int lport_arg,
977     int lookupflags, struct ifnet *ifp)
978 {
979 	struct inpcbhead *head;
980 	struct inpcb *inp, *tmpinp;
981 	u_short fport = fport_arg, lport = lport_arg;
982 	int faith;
983 
984 	KASSERT((lookupflags & ~(INPLOOKUP_WILDCARD)) == 0,
985 	    ("%s: invalid lookup flags %d", __func__, lookupflags));
986 
987 	INP_HASH_LOCK_ASSERT(pcbinfo);
988 
989 	if (faithprefix_p != NULL)
990 		faith = (*faithprefix_p)(laddr);
991 	else
992 		faith = 0;
993 
994 	/*
995 	 * First look for an exact match.
996 	 */
997 	tmpinp = NULL;
998 	head = &pcbinfo->ipi_hashbase[
999 	    INP_PCBHASH(faddr->s6_addr32[3] /* XXX */, lport, fport,
1000 	    pcbinfo->ipi_hashmask)];
1001 	LIST_FOREACH(inp, head, inp_hash) {
1002 		/* XXX inp locking */
1003 		if ((inp->inp_vflag & INP_IPV6) == 0)
1004 			continue;
1005 		if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
1006 		    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
1007 		    inp->inp_fport == fport &&
1008 		    inp->inp_lport == lport) {
1009 			/*
1010 			 * XXX We should be able to directly return
1011 			 * the inp here, without any checks.
1012 			 * Well unless both bound with SO_REUSEPORT?
1013 			 */
1014 			if (prison_flag(inp->inp_cred, PR_IP6))
1015 				return (inp);
1016 			if (tmpinp == NULL)
1017 				tmpinp = inp;
1018 		}
1019 	}
1020 	if (tmpinp != NULL)
1021 		return (tmpinp);
1022 
1023 	/*
1024 	 * Then look for a wildcard match, if requested.
1025 	 */
1026 	if ((lookupflags & INPLOOKUP_WILDCARD) != 0) {
1027 		struct inpcb *local_wild = NULL, *local_exact = NULL;
1028 		struct inpcb *jail_wild = NULL;
1029 		int injail;
1030 
1031 		/*
1032 		 * Order of socket selection - we always prefer jails.
1033 		 *      1. jailed, non-wild.
1034 		 *      2. jailed, wild.
1035 		 *      3. non-jailed, non-wild.
1036 		 *      4. non-jailed, wild.
1037 		 */
1038 		head = &pcbinfo->ipi_hashbase[INP_PCBHASH(INADDR_ANY, lport,
1039 		    0, pcbinfo->ipi_hashmask)];
1040 		LIST_FOREACH(inp, head, inp_hash) {
1041 			/* XXX inp locking */
1042 			if ((inp->inp_vflag & INP_IPV6) == 0)
1043 				continue;
1044 
1045 			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
1046 			    inp->inp_lport != lport) {
1047 				continue;
1048 			}
1049 
1050 			/* XXX inp locking */
1051 			if (faith && (inp->inp_flags & INP_FAITH) == 0)
1052 				continue;
1053 
1054 			injail = prison_flag(inp->inp_cred, PR_IP6);
1055 			if (injail) {
1056 				if (prison_check_ip6(inp->inp_cred,
1057 				    laddr) != 0)
1058 					continue;
1059 			} else {
1060 				if (local_exact != NULL)
1061 					continue;
1062 			}
1063 
1064 			if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr)) {
1065 				if (injail)
1066 					return (inp);
1067 				else
1068 					local_exact = inp;
1069 			} else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
1070 				if (injail)
1071 					jail_wild = inp;
1072 				else
1073 					local_wild = inp;
1074 			}
1075 		} /* LIST_FOREACH */
1076 
1077 		if (jail_wild != NULL)
1078 			return (jail_wild);
1079 		if (local_exact != NULL)
1080 			return (local_exact);
1081 		if (local_wild != NULL)
1082 			return (local_wild);
1083 	} /* if ((lookupflags & INPLOOKUP_WILDCARD) != 0) */
1084 
1085 	/*
1086 	 * Not found.
1087 	 */
1088 	return (NULL);
1089 }
1090 
1091 /*
1092  * Lookup PCB in hash list, using pcbinfo tables.  This variation locks the
1093  * hash list lock, and will return the inpcb locked (i.e., requires
1094  * INPLOOKUP_LOCKPCB).
1095  */
1096 static struct inpcb *
in6_pcblookup_hash(struct inpcbinfo * pcbinfo,struct in6_addr * faddr,u_int fport,struct in6_addr * laddr,u_int lport,int lookupflags,struct ifnet * ifp)1097 in6_pcblookup_hash(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
1098     u_int fport, struct in6_addr *laddr, u_int lport, int lookupflags,
1099     struct ifnet *ifp)
1100 {
1101 	struct inpcb *inp;
1102 
1103 	INP_HASH_RLOCK(pcbinfo);
1104 	inp = in6_pcblookup_hash_locked(pcbinfo, faddr, fport, laddr, lport,
1105 	    (lookupflags & ~(INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB)), ifp);
1106 	if (inp != NULL) {
1107 		in_pcbref(inp);
1108 		INP_HASH_RUNLOCK(pcbinfo);
1109 		if (lookupflags & INPLOOKUP_WLOCKPCB) {
1110 			INP_WLOCK(inp);
1111 			if (in_pcbrele_wlocked(inp))
1112 				return (NULL);
1113 		} else if (lookupflags & INPLOOKUP_RLOCKPCB) {
1114 			INP_RLOCK(inp);
1115 			if (in_pcbrele_rlocked(inp))
1116 				return (NULL);
1117 		} else
1118 			panic("%s: locking bug", __func__);
1119 	} else
1120 		INP_HASH_RUNLOCK(pcbinfo);
1121 	return (inp);
1122 }
1123 
1124 /*
1125  * Public inpcb lookup routines, accepting a 4-tuple, and optionally, an mbuf
1126  * from which a pre-calculated hash value may be extracted.
1127  *
1128  * Possibly more of this logic should be in in6_pcbgroup.c.
1129  */
1130 struct inpcb *
in6_pcblookup(struct inpcbinfo * pcbinfo,struct in6_addr * faddr,u_int fport,struct in6_addr * laddr,u_int lport,int lookupflags,struct ifnet * ifp)1131 in6_pcblookup(struct inpcbinfo *pcbinfo, struct in6_addr *faddr, u_int fport,
1132     struct in6_addr *laddr, u_int lport, int lookupflags, struct ifnet *ifp)
1133 {
1134 #if defined(PCBGROUP)
1135 	struct inpcbgroup *pcbgroup;
1136 #endif
1137 
1138 	KASSERT((lookupflags & ~INPLOOKUP_MASK) == 0,
1139 	    ("%s: invalid lookup flags %d", __func__, lookupflags));
1140 	KASSERT((lookupflags & (INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB)) != 0,
1141 	    ("%s: LOCKPCB not set", __func__));
1142 
1143 #if defined(PCBGROUP)
1144 	if (in_pcbgroup_enabled(pcbinfo)) {
1145 		pcbgroup = in6_pcbgroup_bytuple(pcbinfo, laddr, lport, faddr,
1146 		    fport);
1147 		return (in6_pcblookup_group(pcbinfo, pcbgroup, faddr, fport,
1148 		    laddr, lport, lookupflags, ifp));
1149 	}
1150 #endif
1151 	return (in6_pcblookup_hash(pcbinfo, faddr, fport, laddr, lport,
1152 	    lookupflags, ifp));
1153 }
1154 
1155 struct inpcb *
in6_pcblookup_mbuf(struct inpcbinfo * pcbinfo,struct in6_addr * faddr,u_int fport,struct in6_addr * laddr,u_int lport,int lookupflags,struct ifnet * ifp,struct mbuf * m)1156 in6_pcblookup_mbuf(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
1157     u_int fport, struct in6_addr *laddr, u_int lport, int lookupflags,
1158     struct ifnet *ifp, struct mbuf *m)
1159 {
1160 #ifdef PCBGROUP
1161 	struct inpcbgroup *pcbgroup;
1162 #endif
1163 
1164 	KASSERT((lookupflags & ~INPLOOKUP_MASK) == 0,
1165 	    ("%s: invalid lookup flags %d", __func__, lookupflags));
1166 	KASSERT((lookupflags & (INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB)) != 0,
1167 	    ("%s: LOCKPCB not set", __func__));
1168 
1169 #ifdef PCBGROUP
1170 	if (in_pcbgroup_enabled(pcbinfo)) {
1171 		pcbgroup = in6_pcbgroup_byhash(pcbinfo, M_HASHTYPE_GET(m),
1172 		    m->m_pkthdr.flowid);
1173 		if (pcbgroup != NULL)
1174 			return (in6_pcblookup_group(pcbinfo, pcbgroup, faddr,
1175 			    fport, laddr, lport, lookupflags, ifp));
1176 		pcbgroup = in6_pcbgroup_bytuple(pcbinfo, laddr, lport, faddr,
1177 		    fport);
1178 		return (in6_pcblookup_group(pcbinfo, pcbgroup, faddr, fport,
1179 		    laddr, lport, lookupflags, ifp));
1180 	}
1181 #endif
1182 	return (in6_pcblookup_hash(pcbinfo, faddr, fport, laddr, lport,
1183 	    lookupflags, ifp));
1184 }
1185 
1186 void
init_sin6(struct sockaddr_in6 * sin6,struct mbuf * m)1187 init_sin6(struct sockaddr_in6 *sin6, struct mbuf *m)
1188 {
1189 	struct ip6_hdr *ip;
1190 
1191 	ip = mtod(m, struct ip6_hdr *);
1192 	bzero(sin6, sizeof(*sin6));
1193 	sin6->sin6_len = sizeof(*sin6);
1194 	sin6->sin6_family = AF_INET6;
1195 	sin6->sin6_addr = ip->ip6_src;
1196 
1197 	(void)sa6_recoverscope(sin6); /* XXX: should catch errors... */
1198 
1199 	return;
1200 }
1201