1 /******************************************************************************
2
3 Copyright (c) 2001-2019, Intel Corporation
4 All rights reserved.
5
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
8
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
11
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
15
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
19
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
31
32 ******************************************************************************/
33 /*$FreeBSD$*/
34
35 #include "e1000_api.h"
36
37 /**
38 * e1000_init_mac_params - Initialize MAC function pointers
39 * @hw: pointer to the HW structure
40 *
41 * This function initializes the function pointers for the MAC
42 * set of functions. Called by drivers or by e1000_setup_init_funcs.
43 **/
e1000_init_mac_params(struct e1000_hw * hw)44 s32 e1000_init_mac_params(struct e1000_hw *hw)
45 {
46 s32 ret_val = E1000_SUCCESS;
47
48 if (hw->mac.ops.init_params) {
49 ret_val = hw->mac.ops.init_params(hw);
50 if (ret_val) {
51 DEBUGOUT("MAC Initialization Error\n");
52 goto out;
53 }
54 } else {
55 DEBUGOUT("mac.init_mac_params was NULL\n");
56 ret_val = -E1000_ERR_CONFIG;
57 }
58
59 out:
60 return ret_val;
61 }
62
63 /**
64 * e1000_init_nvm_params - Initialize NVM function pointers
65 * @hw: pointer to the HW structure
66 *
67 * This function initializes the function pointers for the NVM
68 * set of functions. Called by drivers or by e1000_setup_init_funcs.
69 **/
e1000_init_nvm_params(struct e1000_hw * hw)70 s32 e1000_init_nvm_params(struct e1000_hw *hw)
71 {
72 s32 ret_val = E1000_SUCCESS;
73
74 if (hw->nvm.ops.init_params) {
75 ret_val = hw->nvm.ops.init_params(hw);
76 if (ret_val) {
77 DEBUGOUT("NVM Initialization Error\n");
78 goto out;
79 }
80 } else {
81 DEBUGOUT("nvm.init_nvm_params was NULL\n");
82 ret_val = -E1000_ERR_CONFIG;
83 }
84
85 out:
86 return ret_val;
87 }
88
89 /**
90 * e1000_init_phy_params - Initialize PHY function pointers
91 * @hw: pointer to the HW structure
92 *
93 * This function initializes the function pointers for the PHY
94 * set of functions. Called by drivers or by e1000_setup_init_funcs.
95 **/
e1000_init_phy_params(struct e1000_hw * hw)96 s32 e1000_init_phy_params(struct e1000_hw *hw)
97 {
98 s32 ret_val = E1000_SUCCESS;
99
100 if (hw->phy.ops.init_params) {
101 ret_val = hw->phy.ops.init_params(hw);
102 if (ret_val) {
103 DEBUGOUT("PHY Initialization Error\n");
104 goto out;
105 }
106 } else {
107 DEBUGOUT("phy.init_phy_params was NULL\n");
108 ret_val = -E1000_ERR_CONFIG;
109 }
110
111 out:
112 return ret_val;
113 }
114
115 /**
116 * e1000_init_mbx_params - Initialize mailbox function pointers
117 * @hw: pointer to the HW structure
118 *
119 * This function initializes the function pointers for the PHY
120 * set of functions. Called by drivers or by e1000_setup_init_funcs.
121 **/
e1000_init_mbx_params(struct e1000_hw * hw)122 s32 e1000_init_mbx_params(struct e1000_hw *hw)
123 {
124 s32 ret_val = E1000_SUCCESS;
125
126 if (hw->mbx.ops.init_params) {
127 ret_val = hw->mbx.ops.init_params(hw);
128 if (ret_val) {
129 DEBUGOUT("Mailbox Initialization Error\n");
130 goto out;
131 }
132 } else {
133 DEBUGOUT("mbx.init_mbx_params was NULL\n");
134 ret_val = -E1000_ERR_CONFIG;
135 }
136
137 out:
138 return ret_val;
139 }
140
141 /**
142 * e1000_set_mac_type - Sets MAC type
143 * @hw: pointer to the HW structure
144 *
145 * This function sets the mac type of the adapter based on the
146 * device ID stored in the hw structure.
147 * MUST BE FIRST FUNCTION CALLED (explicitly or through
148 * e1000_setup_init_funcs()).
149 **/
e1000_set_mac_type(struct e1000_hw * hw)150 s32 e1000_set_mac_type(struct e1000_hw *hw)
151 {
152 struct e1000_mac_info *mac = &hw->mac;
153 s32 ret_val = E1000_SUCCESS;
154
155 DEBUGFUNC("e1000_set_mac_type");
156
157 switch (hw->device_id) {
158 case E1000_DEV_ID_82542:
159 mac->type = e1000_82542;
160 break;
161 case E1000_DEV_ID_82543GC_FIBER:
162 case E1000_DEV_ID_82543GC_COPPER:
163 mac->type = e1000_82543;
164 break;
165 case E1000_DEV_ID_82544EI_COPPER:
166 case E1000_DEV_ID_82544EI_FIBER:
167 case E1000_DEV_ID_82544GC_COPPER:
168 case E1000_DEV_ID_82544GC_LOM:
169 mac->type = e1000_82544;
170 break;
171 case E1000_DEV_ID_82540EM:
172 case E1000_DEV_ID_82540EM_LOM:
173 case E1000_DEV_ID_82540EP:
174 case E1000_DEV_ID_82540EP_LOM:
175 case E1000_DEV_ID_82540EP_LP:
176 mac->type = e1000_82540;
177 break;
178 case E1000_DEV_ID_82545EM_COPPER:
179 case E1000_DEV_ID_82545EM_FIBER:
180 mac->type = e1000_82545;
181 break;
182 case E1000_DEV_ID_82545GM_COPPER:
183 case E1000_DEV_ID_82545GM_FIBER:
184 case E1000_DEV_ID_82545GM_SERDES:
185 mac->type = e1000_82545_rev_3;
186 break;
187 case E1000_DEV_ID_82546EB_COPPER:
188 case E1000_DEV_ID_82546EB_FIBER:
189 case E1000_DEV_ID_82546EB_QUAD_COPPER:
190 mac->type = e1000_82546;
191 break;
192 case E1000_DEV_ID_82546GB_COPPER:
193 case E1000_DEV_ID_82546GB_FIBER:
194 case E1000_DEV_ID_82546GB_SERDES:
195 case E1000_DEV_ID_82546GB_PCIE:
196 case E1000_DEV_ID_82546GB_QUAD_COPPER:
197 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
198 mac->type = e1000_82546_rev_3;
199 break;
200 case E1000_DEV_ID_82541EI:
201 case E1000_DEV_ID_82541EI_MOBILE:
202 case E1000_DEV_ID_82541ER_LOM:
203 mac->type = e1000_82541;
204 break;
205 case E1000_DEV_ID_82541ER:
206 case E1000_DEV_ID_82541GI:
207 case E1000_DEV_ID_82541GI_LF:
208 case E1000_DEV_ID_82541GI_MOBILE:
209 mac->type = e1000_82541_rev_2;
210 break;
211 case E1000_DEV_ID_82547EI:
212 case E1000_DEV_ID_82547EI_MOBILE:
213 mac->type = e1000_82547;
214 break;
215 case E1000_DEV_ID_82547GI:
216 mac->type = e1000_82547_rev_2;
217 break;
218 case E1000_DEV_ID_82571EB_COPPER:
219 case E1000_DEV_ID_82571EB_FIBER:
220 case E1000_DEV_ID_82571EB_SERDES:
221 case E1000_DEV_ID_82571EB_SERDES_DUAL:
222 case E1000_DEV_ID_82571EB_SERDES_QUAD:
223 case E1000_DEV_ID_82571EB_QUAD_COPPER:
224 case E1000_DEV_ID_82571PT_QUAD_COPPER:
225 case E1000_DEV_ID_82571EB_QUAD_FIBER:
226 case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
227 case E1000_DEV_ID_82571EB_QUAD_COPPER_BP:
228 mac->type = e1000_82571;
229 break;
230 case E1000_DEV_ID_82572EI:
231 case E1000_DEV_ID_82572EI_COPPER:
232 case E1000_DEV_ID_82572EI_FIBER:
233 case E1000_DEV_ID_82572EI_SERDES:
234 mac->type = e1000_82572;
235 break;
236 case E1000_DEV_ID_82573E:
237 case E1000_DEV_ID_82573E_IAMT:
238 case E1000_DEV_ID_82573L:
239 mac->type = e1000_82573;
240 break;
241 case E1000_DEV_ID_82574L:
242 case E1000_DEV_ID_82574LA:
243 mac->type = e1000_82574;
244 break;
245 case E1000_DEV_ID_82583V:
246 mac->type = e1000_82583;
247 break;
248 case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
249 case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
250 case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
251 case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
252 mac->type = e1000_80003es2lan;
253 break;
254 case E1000_DEV_ID_ICH8_IFE:
255 case E1000_DEV_ID_ICH8_IFE_GT:
256 case E1000_DEV_ID_ICH8_IFE_G:
257 case E1000_DEV_ID_ICH8_IGP_M:
258 case E1000_DEV_ID_ICH8_IGP_M_AMT:
259 case E1000_DEV_ID_ICH8_IGP_AMT:
260 case E1000_DEV_ID_ICH8_IGP_C:
261 case E1000_DEV_ID_ICH8_82567V_3:
262 mac->type = e1000_ich8lan;
263 break;
264 case E1000_DEV_ID_ICH9_IFE:
265 case E1000_DEV_ID_ICH9_IFE_GT:
266 case E1000_DEV_ID_ICH9_IFE_G:
267 case E1000_DEV_ID_ICH9_IGP_M:
268 case E1000_DEV_ID_ICH9_IGP_M_AMT:
269 case E1000_DEV_ID_ICH9_IGP_M_V:
270 case E1000_DEV_ID_ICH9_IGP_AMT:
271 case E1000_DEV_ID_ICH9_BM:
272 case E1000_DEV_ID_ICH9_IGP_C:
273 case E1000_DEV_ID_ICH10_R_BM_LM:
274 case E1000_DEV_ID_ICH10_R_BM_LF:
275 case E1000_DEV_ID_ICH10_R_BM_V:
276 mac->type = e1000_ich9lan;
277 break;
278 case E1000_DEV_ID_ICH10_D_BM_LM:
279 case E1000_DEV_ID_ICH10_D_BM_LF:
280 case E1000_DEV_ID_ICH10_D_BM_V:
281 mac->type = e1000_ich10lan;
282 break;
283 case E1000_DEV_ID_PCH_D_HV_DM:
284 case E1000_DEV_ID_PCH_D_HV_DC:
285 case E1000_DEV_ID_PCH_M_HV_LM:
286 case E1000_DEV_ID_PCH_M_HV_LC:
287 mac->type = e1000_pchlan;
288 break;
289 case E1000_DEV_ID_PCH2_LV_LM:
290 case E1000_DEV_ID_PCH2_LV_V:
291 mac->type = e1000_pch2lan;
292 break;
293 case E1000_DEV_ID_PCH_LPT_I217_LM:
294 case E1000_DEV_ID_PCH_LPT_I217_V:
295 case E1000_DEV_ID_PCH_LPTLP_I218_LM:
296 case E1000_DEV_ID_PCH_LPTLP_I218_V:
297 case E1000_DEV_ID_PCH_I218_LM2:
298 case E1000_DEV_ID_PCH_I218_V2:
299 case E1000_DEV_ID_PCH_I218_LM3:
300 case E1000_DEV_ID_PCH_I218_V3:
301 mac->type = e1000_pch_lpt;
302 break;
303 case E1000_DEV_ID_PCH_SPT_I219_LM:
304 case E1000_DEV_ID_PCH_SPT_I219_V:
305 case E1000_DEV_ID_PCH_SPT_I219_LM2:
306 case E1000_DEV_ID_PCH_SPT_I219_V2:
307 case E1000_DEV_ID_PCH_LBG_I219_LM3:
308 case E1000_DEV_ID_PCH_SPT_I219_LM4:
309 case E1000_DEV_ID_PCH_SPT_I219_V4:
310 case E1000_DEV_ID_PCH_SPT_I219_LM5:
311 case E1000_DEV_ID_PCH_SPT_I219_V5:
312 case E1000_DEV_ID_PCH_CMP_I219_LM12:
313 case E1000_DEV_ID_PCH_CMP_I219_V12:
314 mac->type = e1000_pch_spt;
315 break;
316 case E1000_DEV_ID_PCH_CNP_I219_LM6:
317 case E1000_DEV_ID_PCH_CNP_I219_V6:
318 case E1000_DEV_ID_PCH_CNP_I219_LM7:
319 case E1000_DEV_ID_PCH_CNP_I219_V7:
320 case E1000_DEV_ID_PCH_ICP_I219_LM8:
321 case E1000_DEV_ID_PCH_ICP_I219_V8:
322 case E1000_DEV_ID_PCH_ICP_I219_LM9:
323 case E1000_DEV_ID_PCH_ICP_I219_V9:
324 case E1000_DEV_ID_PCH_CMP_I219_LM10:
325 case E1000_DEV_ID_PCH_CMP_I219_V10:
326 case E1000_DEV_ID_PCH_CMP_I219_LM11:
327 case E1000_DEV_ID_PCH_CMP_I219_V11:
328 case E1000_DEV_ID_PCH_TGP_I219_LM13:
329 case E1000_DEV_ID_PCH_TGP_I219_V13:
330 case E1000_DEV_ID_PCH_TGP_I219_LM14:
331 case E1000_DEV_ID_PCH_TGP_I219_V14:
332 case E1000_DEV_ID_PCH_TGP_I219_LM15:
333 case E1000_DEV_ID_PCH_TGP_I219_V15:
334 case E1000_DEV_ID_PCH_ADP_I219_LM16:
335 case E1000_DEV_ID_PCH_ADP_I219_V16:
336 case E1000_DEV_ID_PCH_ADP_I219_LM17:
337 case E1000_DEV_ID_PCH_ADP_I219_V17:
338 case E1000_DEV_ID_PCH_MTP_I219_LM18:
339 case E1000_DEV_ID_PCH_MTP_I219_V18:
340 case E1000_DEV_ID_PCH_MTP_I219_LM19:
341 case E1000_DEV_ID_PCH_MTP_I219_V19:
342 mac->type = e1000_pch_cnp;
343 break;
344 case E1000_DEV_ID_82575EB_COPPER:
345 case E1000_DEV_ID_82575EB_FIBER_SERDES:
346 case E1000_DEV_ID_82575GB_QUAD_COPPER:
347 mac->type = e1000_82575;
348 break;
349 case E1000_DEV_ID_82576:
350 case E1000_DEV_ID_82576_FIBER:
351 case E1000_DEV_ID_82576_SERDES:
352 case E1000_DEV_ID_82576_QUAD_COPPER:
353 case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
354 case E1000_DEV_ID_82576_NS:
355 case E1000_DEV_ID_82576_NS_SERDES:
356 case E1000_DEV_ID_82576_SERDES_QUAD:
357 mac->type = e1000_82576;
358 break;
359 case E1000_DEV_ID_82580_COPPER:
360 case E1000_DEV_ID_82580_FIBER:
361 case E1000_DEV_ID_82580_SERDES:
362 case E1000_DEV_ID_82580_SGMII:
363 case E1000_DEV_ID_82580_COPPER_DUAL:
364 case E1000_DEV_ID_82580_QUAD_FIBER:
365 case E1000_DEV_ID_DH89XXCC_SGMII:
366 case E1000_DEV_ID_DH89XXCC_SERDES:
367 case E1000_DEV_ID_DH89XXCC_BACKPLANE:
368 case E1000_DEV_ID_DH89XXCC_SFP:
369 mac->type = e1000_82580;
370 break;
371 case E1000_DEV_ID_I350_COPPER:
372 case E1000_DEV_ID_I350_FIBER:
373 case E1000_DEV_ID_I350_SERDES:
374 case E1000_DEV_ID_I350_SGMII:
375 case E1000_DEV_ID_I350_DA4:
376 mac->type = e1000_i350;
377 break;
378 case E1000_DEV_ID_I210_COPPER_FLASHLESS:
379 case E1000_DEV_ID_I210_SERDES_FLASHLESS:
380 case E1000_DEV_ID_I210_COPPER:
381 case E1000_DEV_ID_I210_COPPER_OEM1:
382 case E1000_DEV_ID_I210_COPPER_IT:
383 case E1000_DEV_ID_I210_FIBER:
384 case E1000_DEV_ID_I210_SERDES:
385 case E1000_DEV_ID_I210_SGMII:
386 mac->type = e1000_i210;
387 break;
388 case E1000_DEV_ID_I211_COPPER:
389 mac->type = e1000_i211;
390 break;
391 case E1000_DEV_ID_82576_VF:
392 case E1000_DEV_ID_82576_VF_HV:
393 mac->type = e1000_vfadapt;
394 break;
395 case E1000_DEV_ID_I350_VF:
396 case E1000_DEV_ID_I350_VF_HV:
397 mac->type = e1000_vfadapt_i350;
398 break;
399
400 case E1000_DEV_ID_I354_BACKPLANE_1GBPS:
401 case E1000_DEV_ID_I354_SGMII:
402 case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS:
403 mac->type = e1000_i354;
404 break;
405 default:
406 /* Should never have loaded on this device */
407 ret_val = -E1000_ERR_MAC_INIT;
408 break;
409 }
410
411 return ret_val;
412 }
413
414 /**
415 * e1000_setup_init_funcs - Initializes function pointers
416 * @hw: pointer to the HW structure
417 * @init_device: TRUE will initialize the rest of the function pointers
418 * getting the device ready for use. FALSE will only set
419 * MAC type and the function pointers for the other init
420 * functions. Passing FALSE will not generate any hardware
421 * reads or writes.
422 *
423 * This function must be called by a driver in order to use the rest
424 * of the 'shared' code files. Called by drivers only.
425 **/
e1000_setup_init_funcs(struct e1000_hw * hw,bool init_device)426 s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device)
427 {
428 s32 ret_val;
429
430 /* Can't do much good without knowing the MAC type. */
431 ret_val = e1000_set_mac_type(hw);
432 if (ret_val) {
433 DEBUGOUT("ERROR: MAC type could not be set properly.\n");
434 goto out;
435 }
436
437 if (!hw->hw_addr) {
438 DEBUGOUT("ERROR: Registers not mapped\n");
439 ret_val = -E1000_ERR_CONFIG;
440 goto out;
441 }
442
443 /*
444 * Init function pointers to generic implementations. We do this first
445 * allowing a driver module to override it afterward.
446 */
447 e1000_init_mac_ops_generic(hw);
448 e1000_init_phy_ops_generic(hw);
449 e1000_init_nvm_ops_generic(hw);
450 e1000_init_mbx_ops_generic(hw);
451
452 /*
453 * Set up the init function pointers. These are functions within the
454 * adapter family file that sets up function pointers for the rest of
455 * the functions in that family.
456 */
457 switch (hw->mac.type) {
458 case e1000_82542:
459 e1000_init_function_pointers_82542(hw);
460 break;
461 case e1000_82543:
462 case e1000_82544:
463 e1000_init_function_pointers_82543(hw);
464 break;
465 case e1000_82540:
466 case e1000_82545:
467 case e1000_82545_rev_3:
468 case e1000_82546:
469 case e1000_82546_rev_3:
470 e1000_init_function_pointers_82540(hw);
471 break;
472 case e1000_82541:
473 case e1000_82541_rev_2:
474 case e1000_82547:
475 case e1000_82547_rev_2:
476 e1000_init_function_pointers_82541(hw);
477 break;
478 case e1000_82571:
479 case e1000_82572:
480 case e1000_82573:
481 case e1000_82574:
482 case e1000_82583:
483 e1000_init_function_pointers_82571(hw);
484 break;
485 case e1000_80003es2lan:
486 e1000_init_function_pointers_80003es2lan(hw);
487 break;
488 case e1000_ich8lan:
489 case e1000_ich9lan:
490 case e1000_ich10lan:
491 case e1000_pchlan:
492 case e1000_pch2lan:
493 case e1000_pch_lpt:
494 case e1000_pch_spt:
495 case e1000_pch_cnp:
496 /* fall-through */
497 e1000_init_function_pointers_ich8lan(hw);
498 break;
499 case e1000_82575:
500 case e1000_82576:
501 case e1000_82580:
502 case e1000_i350:
503 case e1000_i354:
504 e1000_init_function_pointers_82575(hw);
505 break;
506 case e1000_i210:
507 case e1000_i211:
508 e1000_init_function_pointers_i210(hw);
509 break;
510 case e1000_vfadapt:
511 e1000_init_function_pointers_vf(hw);
512 break;
513 case e1000_vfadapt_i350:
514 e1000_init_function_pointers_vf(hw);
515 break;
516 default:
517 DEBUGOUT("Hardware not supported\n");
518 ret_val = -E1000_ERR_CONFIG;
519 break;
520 }
521
522 /*
523 * Initialize the rest of the function pointers. These require some
524 * register reads/writes in some cases.
525 */
526 if (!(ret_val) && init_device) {
527 ret_val = e1000_init_mac_params(hw);
528 if (ret_val)
529 goto out;
530
531 ret_val = e1000_init_nvm_params(hw);
532 if (ret_val)
533 goto out;
534
535 ret_val = e1000_init_phy_params(hw);
536 if (ret_val)
537 goto out;
538
539 ret_val = e1000_init_mbx_params(hw);
540 if (ret_val)
541 goto out;
542 }
543
544 out:
545 return ret_val;
546 }
547
548 /**
549 * e1000_get_bus_info - Obtain bus information for adapter
550 * @hw: pointer to the HW structure
551 *
552 * This will obtain information about the HW bus for which the
553 * adapter is attached and stores it in the hw structure. This is a
554 * function pointer entry point called by drivers.
555 **/
e1000_get_bus_info(struct e1000_hw * hw)556 s32 e1000_get_bus_info(struct e1000_hw *hw)
557 {
558 if (hw->mac.ops.get_bus_info)
559 return hw->mac.ops.get_bus_info(hw);
560
561 return E1000_SUCCESS;
562 }
563
564 /**
565 * e1000_clear_vfta - Clear VLAN filter table
566 * @hw: pointer to the HW structure
567 *
568 * This clears the VLAN filter table on the adapter. This is a function
569 * pointer entry point called by drivers.
570 **/
e1000_clear_vfta(struct e1000_hw * hw)571 void e1000_clear_vfta(struct e1000_hw *hw)
572 {
573 if (hw->mac.ops.clear_vfta)
574 hw->mac.ops.clear_vfta(hw);
575 }
576
577 /**
578 * e1000_write_vfta - Write value to VLAN filter table
579 * @hw: pointer to the HW structure
580 * @offset: the 32-bit offset in which to write the value to.
581 * @value: the 32-bit value to write at location offset.
582 *
583 * This writes a 32-bit value to a 32-bit offset in the VLAN filter
584 * table. This is a function pointer entry point called by drivers.
585 **/
e1000_write_vfta(struct e1000_hw * hw,u32 offset,u32 value)586 void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
587 {
588 if (hw->mac.ops.write_vfta)
589 hw->mac.ops.write_vfta(hw, offset, value);
590 }
591
592 /**
593 * e1000_update_mc_addr_list - Update Multicast addresses
594 * @hw: pointer to the HW structure
595 * @mc_addr_list: array of multicast addresses to program
596 * @mc_addr_count: number of multicast addresses to program
597 *
598 * Updates the Multicast Table Array.
599 * The caller must have a packed mc_addr_list of multicast addresses.
600 **/
e1000_update_mc_addr_list(struct e1000_hw * hw,u8 * mc_addr_list,u32 mc_addr_count)601 void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
602 u32 mc_addr_count)
603 {
604 if (hw->mac.ops.update_mc_addr_list)
605 hw->mac.ops.update_mc_addr_list(hw, mc_addr_list,
606 mc_addr_count);
607 }
608
609 /**
610 * e1000_force_mac_fc - Force MAC flow control
611 * @hw: pointer to the HW structure
612 *
613 * Force the MAC's flow control settings. Currently no func pointer exists
614 * and all implementations are handled in the generic version of this
615 * function.
616 **/
e1000_force_mac_fc(struct e1000_hw * hw)617 s32 e1000_force_mac_fc(struct e1000_hw *hw)
618 {
619 return e1000_force_mac_fc_generic(hw);
620 }
621
622 /**
623 * e1000_check_for_link - Check/Store link connection
624 * @hw: pointer to the HW structure
625 *
626 * This checks the link condition of the adapter and stores the
627 * results in the hw->mac structure. This is a function pointer entry
628 * point called by drivers.
629 **/
e1000_check_for_link(struct e1000_hw * hw)630 s32 e1000_check_for_link(struct e1000_hw *hw)
631 {
632 if (hw->mac.ops.check_for_link)
633 return hw->mac.ops.check_for_link(hw);
634
635 return -E1000_ERR_CONFIG;
636 }
637
638 /**
639 * e1000_check_mng_mode - Check management mode
640 * @hw: pointer to the HW structure
641 *
642 * This checks if the adapter has manageability enabled.
643 * This is a function pointer entry point called by drivers.
644 **/
e1000_check_mng_mode(struct e1000_hw * hw)645 bool e1000_check_mng_mode(struct e1000_hw *hw)
646 {
647 if (hw->mac.ops.check_mng_mode)
648 return hw->mac.ops.check_mng_mode(hw);
649
650 return FALSE;
651 }
652
653 /**
654 * e1000_mng_write_dhcp_info - Writes DHCP info to host interface
655 * @hw: pointer to the HW structure
656 * @buffer: pointer to the host interface
657 * @length: size of the buffer
658 *
659 * Writes the DHCP information to the host interface.
660 **/
e1000_mng_write_dhcp_info(struct e1000_hw * hw,u8 * buffer,u16 length)661 s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
662 {
663 return e1000_mng_write_dhcp_info_generic(hw, buffer, length);
664 }
665
666 /**
667 * e1000_reset_hw - Reset hardware
668 * @hw: pointer to the HW structure
669 *
670 * This resets the hardware into a known state. This is a function pointer
671 * entry point called by drivers.
672 **/
e1000_reset_hw(struct e1000_hw * hw)673 s32 e1000_reset_hw(struct e1000_hw *hw)
674 {
675 if (hw->mac.ops.reset_hw)
676 return hw->mac.ops.reset_hw(hw);
677
678 return -E1000_ERR_CONFIG;
679 }
680
681 /**
682 * e1000_init_hw - Initialize hardware
683 * @hw: pointer to the HW structure
684 *
685 * This inits the hardware readying it for operation. This is a function
686 * pointer entry point called by drivers.
687 **/
e1000_init_hw(struct e1000_hw * hw)688 s32 e1000_init_hw(struct e1000_hw *hw)
689 {
690 if (hw->mac.ops.init_hw)
691 return hw->mac.ops.init_hw(hw);
692
693 return -E1000_ERR_CONFIG;
694 }
695
696 /**
697 * e1000_setup_link - Configures link and flow control
698 * @hw: pointer to the HW structure
699 *
700 * This configures link and flow control settings for the adapter. This
701 * is a function pointer entry point called by drivers. While modules can
702 * also call this, they probably call their own version of this function.
703 **/
e1000_setup_link(struct e1000_hw * hw)704 s32 e1000_setup_link(struct e1000_hw *hw)
705 {
706 if (hw->mac.ops.setup_link)
707 return hw->mac.ops.setup_link(hw);
708
709 return -E1000_ERR_CONFIG;
710 }
711
712 /**
713 * e1000_get_speed_and_duplex - Returns current speed and duplex
714 * @hw: pointer to the HW structure
715 * @speed: pointer to a 16-bit value to store the speed
716 * @duplex: pointer to a 16-bit value to store the duplex.
717 *
718 * This returns the speed and duplex of the adapter in the two 'out'
719 * variables passed in. This is a function pointer entry point called
720 * by drivers.
721 **/
e1000_get_speed_and_duplex(struct e1000_hw * hw,u16 * speed,u16 * duplex)722 s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
723 {
724 if (hw->mac.ops.get_link_up_info)
725 return hw->mac.ops.get_link_up_info(hw, speed, duplex);
726
727 return -E1000_ERR_CONFIG;
728 }
729
730 /**
731 * e1000_setup_led - Configures SW controllable LED
732 * @hw: pointer to the HW structure
733 *
734 * This prepares the SW controllable LED for use and saves the current state
735 * of the LED so it can be later restored. This is a function pointer entry
736 * point called by drivers.
737 **/
e1000_setup_led(struct e1000_hw * hw)738 s32 e1000_setup_led(struct e1000_hw *hw)
739 {
740 if (hw->mac.ops.setup_led)
741 return hw->mac.ops.setup_led(hw);
742
743 return E1000_SUCCESS;
744 }
745
746 /**
747 * e1000_cleanup_led - Restores SW controllable LED
748 * @hw: pointer to the HW structure
749 *
750 * This restores the SW controllable LED to the value saved off by
751 * e1000_setup_led. This is a function pointer entry point called by drivers.
752 **/
e1000_cleanup_led(struct e1000_hw * hw)753 s32 e1000_cleanup_led(struct e1000_hw *hw)
754 {
755 if (hw->mac.ops.cleanup_led)
756 return hw->mac.ops.cleanup_led(hw);
757
758 return E1000_SUCCESS;
759 }
760
761 /**
762 * e1000_blink_led - Blink SW controllable LED
763 * @hw: pointer to the HW structure
764 *
765 * This starts the adapter LED blinking. Request the LED to be setup first
766 * and cleaned up after. This is a function pointer entry point called by
767 * drivers.
768 **/
e1000_blink_led(struct e1000_hw * hw)769 s32 e1000_blink_led(struct e1000_hw *hw)
770 {
771 if (hw->mac.ops.blink_led)
772 return hw->mac.ops.blink_led(hw);
773
774 return E1000_SUCCESS;
775 }
776
777 /**
778 * e1000_id_led_init - store LED configurations in SW
779 * @hw: pointer to the HW structure
780 *
781 * Initializes the LED config in SW. This is a function pointer entry point
782 * called by drivers.
783 **/
e1000_id_led_init(struct e1000_hw * hw)784 s32 e1000_id_led_init(struct e1000_hw *hw)
785 {
786 if (hw->mac.ops.id_led_init)
787 return hw->mac.ops.id_led_init(hw);
788
789 return E1000_SUCCESS;
790 }
791
792 /**
793 * e1000_led_on - Turn on SW controllable LED
794 * @hw: pointer to the HW structure
795 *
796 * Turns the SW defined LED on. This is a function pointer entry point
797 * called by drivers.
798 **/
e1000_led_on(struct e1000_hw * hw)799 s32 e1000_led_on(struct e1000_hw *hw)
800 {
801 if (hw->mac.ops.led_on)
802 return hw->mac.ops.led_on(hw);
803
804 return E1000_SUCCESS;
805 }
806
807 /**
808 * e1000_led_off - Turn off SW controllable LED
809 * @hw: pointer to the HW structure
810 *
811 * Turns the SW defined LED off. This is a function pointer entry point
812 * called by drivers.
813 **/
e1000_led_off(struct e1000_hw * hw)814 s32 e1000_led_off(struct e1000_hw *hw)
815 {
816 if (hw->mac.ops.led_off)
817 return hw->mac.ops.led_off(hw);
818
819 return E1000_SUCCESS;
820 }
821
822 /**
823 * e1000_reset_adaptive - Reset adaptive IFS
824 * @hw: pointer to the HW structure
825 *
826 * Resets the adaptive IFS. Currently no func pointer exists and all
827 * implementations are handled in the generic version of this function.
828 **/
e1000_reset_adaptive(struct e1000_hw * hw)829 void e1000_reset_adaptive(struct e1000_hw *hw)
830 {
831 e1000_reset_adaptive_generic(hw);
832 }
833
834 /**
835 * e1000_update_adaptive - Update adaptive IFS
836 * @hw: pointer to the HW structure
837 *
838 * Updates adapter IFS. Currently no func pointer exists and all
839 * implementations are handled in the generic version of this function.
840 **/
e1000_update_adaptive(struct e1000_hw * hw)841 void e1000_update_adaptive(struct e1000_hw *hw)
842 {
843 e1000_update_adaptive_generic(hw);
844 }
845
846 /**
847 * e1000_disable_pcie_master - Disable PCI-Express master access
848 * @hw: pointer to the HW structure
849 *
850 * Disables PCI-Express master access and verifies there are no pending
851 * requests. Currently no func pointer exists and all implementations are
852 * handled in the generic version of this function.
853 **/
e1000_disable_pcie_master(struct e1000_hw * hw)854 s32 e1000_disable_pcie_master(struct e1000_hw *hw)
855 {
856 return e1000_disable_pcie_master_generic(hw);
857 }
858
859 /**
860 * e1000_config_collision_dist - Configure collision distance
861 * @hw: pointer to the HW structure
862 *
863 * Configures the collision distance to the default value and is used
864 * during link setup.
865 **/
e1000_config_collision_dist(struct e1000_hw * hw)866 void e1000_config_collision_dist(struct e1000_hw *hw)
867 {
868 if (hw->mac.ops.config_collision_dist)
869 hw->mac.ops.config_collision_dist(hw);
870 }
871
872 /**
873 * e1000_rar_set - Sets a receive address register
874 * @hw: pointer to the HW structure
875 * @addr: address to set the RAR to
876 * @index: the RAR to set
877 *
878 * Sets a Receive Address Register (RAR) to the specified address.
879 **/
e1000_rar_set(struct e1000_hw * hw,u8 * addr,u32 index)880 int e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
881 {
882 if (hw->mac.ops.rar_set)
883 return hw->mac.ops.rar_set(hw, addr, index);
884
885 return E1000_SUCCESS;
886 }
887
888 /**
889 * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state
890 * @hw: pointer to the HW structure
891 *
892 * Ensures that the MDI/MDIX SW state is valid.
893 **/
e1000_validate_mdi_setting(struct e1000_hw * hw)894 s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
895 {
896 if (hw->mac.ops.validate_mdi_setting)
897 return hw->mac.ops.validate_mdi_setting(hw);
898
899 return E1000_SUCCESS;
900 }
901
902 /**
903 * e1000_hash_mc_addr - Determines address location in multicast table
904 * @hw: pointer to the HW structure
905 * @mc_addr: Multicast address to hash.
906 *
907 * This hashes an address to determine its location in the multicast
908 * table. Currently no func pointer exists and all implementations
909 * are handled in the generic version of this function.
910 **/
e1000_hash_mc_addr(struct e1000_hw * hw,u8 * mc_addr)911 u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
912 {
913 return e1000_hash_mc_addr_generic(hw, mc_addr);
914 }
915
916 /**
917 * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX
918 * @hw: pointer to the HW structure
919 *
920 * Enables packet filtering on transmit packets if manageability is enabled
921 * and host interface is enabled.
922 * Currently no func pointer exists and all implementations are handled in the
923 * generic version of this function.
924 **/
e1000_enable_tx_pkt_filtering(struct e1000_hw * hw)925 bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
926 {
927 return e1000_enable_tx_pkt_filtering_generic(hw);
928 }
929
930 /**
931 * e1000_mng_host_if_write - Writes to the manageability host interface
932 * @hw: pointer to the HW structure
933 * @buffer: pointer to the host interface buffer
934 * @length: size of the buffer
935 * @offset: location in the buffer to write to
936 * @sum: sum of the data (not checksum)
937 *
938 * This function writes the buffer content at the offset given on the host if.
939 * It also does alignment considerations to do the writes in most efficient
940 * way. Also fills up the sum of the buffer in *buffer parameter.
941 **/
e1000_mng_host_if_write(struct e1000_hw * hw,u8 * buffer,u16 length,u16 offset,u8 * sum)942 s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
943 u16 offset, u8 *sum)
944 {
945 return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum);
946 }
947
948 /**
949 * e1000_mng_write_cmd_header - Writes manageability command header
950 * @hw: pointer to the HW structure
951 * @hdr: pointer to the host interface command header
952 *
953 * Writes the command header after does the checksum calculation.
954 **/
e1000_mng_write_cmd_header(struct e1000_hw * hw,struct e1000_host_mng_command_header * hdr)955 s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
956 struct e1000_host_mng_command_header *hdr)
957 {
958 return e1000_mng_write_cmd_header_generic(hw, hdr);
959 }
960
961 /**
962 * e1000_mng_enable_host_if - Checks host interface is enabled
963 * @hw: pointer to the HW structure
964 *
965 * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
966 *
967 * This function checks whether the HOST IF is enabled for command operation
968 * and also checks whether the previous command is completed. It busy waits
969 * in case of previous command is not completed.
970 **/
e1000_mng_enable_host_if(struct e1000_hw * hw)971 s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
972 {
973 return e1000_mng_enable_host_if_generic(hw);
974 }
975
976 /**
977 * e1000_set_obff_timer - Set Optimized Buffer Flush/Fill timer
978 * @hw: pointer to the HW structure
979 * @itr: u32 indicating itr value
980 *
981 * Set the OBFF timer based on the given interrupt rate.
982 **/
e1000_set_obff_timer(struct e1000_hw * hw,u32 itr)983 s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr)
984 {
985 if (hw->mac.ops.set_obff_timer)
986 return hw->mac.ops.set_obff_timer(hw, itr);
987
988 return E1000_SUCCESS;
989 }
990
991 /**
992 * e1000_check_reset_block - Verifies PHY can be reset
993 * @hw: pointer to the HW structure
994 *
995 * Checks if the PHY is in a state that can be reset or if manageability
996 * has it tied up. This is a function pointer entry point called by drivers.
997 **/
e1000_check_reset_block(struct e1000_hw * hw)998 s32 e1000_check_reset_block(struct e1000_hw *hw)
999 {
1000 if (hw->phy.ops.check_reset_block)
1001 return hw->phy.ops.check_reset_block(hw);
1002
1003 return E1000_SUCCESS;
1004 }
1005
1006 /**
1007 * e1000_read_phy_reg - Reads PHY register
1008 * @hw: pointer to the HW structure
1009 * @offset: the register to read
1010 * @data: the buffer to store the 16-bit read.
1011 *
1012 * Reads the PHY register and returns the value in data.
1013 * This is a function pointer entry point called by drivers.
1014 **/
e1000_read_phy_reg(struct e1000_hw * hw,u32 offset,u16 * data)1015 s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
1016 {
1017 if (hw->phy.ops.read_reg)
1018 return hw->phy.ops.read_reg(hw, offset, data);
1019
1020 return E1000_SUCCESS;
1021 }
1022
1023 /**
1024 * e1000_write_phy_reg - Writes PHY register
1025 * @hw: pointer to the HW structure
1026 * @offset: the register to write
1027 * @data: the value to write.
1028 *
1029 * Writes the PHY register at offset with the value in data.
1030 * This is a function pointer entry point called by drivers.
1031 **/
e1000_write_phy_reg(struct e1000_hw * hw,u32 offset,u16 data)1032 s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
1033 {
1034 if (hw->phy.ops.write_reg)
1035 return hw->phy.ops.write_reg(hw, offset, data);
1036
1037 return E1000_SUCCESS;
1038 }
1039
1040 /**
1041 * e1000_release_phy - Generic release PHY
1042 * @hw: pointer to the HW structure
1043 *
1044 * Return if silicon family does not require a semaphore when accessing the
1045 * PHY.
1046 **/
e1000_release_phy(struct e1000_hw * hw)1047 void e1000_release_phy(struct e1000_hw *hw)
1048 {
1049 if (hw->phy.ops.release)
1050 hw->phy.ops.release(hw);
1051 }
1052
1053 /**
1054 * e1000_acquire_phy - Generic acquire PHY
1055 * @hw: pointer to the HW structure
1056 *
1057 * Return success if silicon family does not require a semaphore when
1058 * accessing the PHY.
1059 **/
e1000_acquire_phy(struct e1000_hw * hw)1060 s32 e1000_acquire_phy(struct e1000_hw *hw)
1061 {
1062 if (hw->phy.ops.acquire)
1063 return hw->phy.ops.acquire(hw);
1064
1065 return E1000_SUCCESS;
1066 }
1067
1068 /**
1069 * e1000_cfg_on_link_up - Configure PHY upon link up
1070 * @hw: pointer to the HW structure
1071 **/
e1000_cfg_on_link_up(struct e1000_hw * hw)1072 s32 e1000_cfg_on_link_up(struct e1000_hw *hw)
1073 {
1074 if (hw->phy.ops.cfg_on_link_up)
1075 return hw->phy.ops.cfg_on_link_up(hw);
1076
1077 return E1000_SUCCESS;
1078 }
1079
1080 /**
1081 * e1000_read_kmrn_reg - Reads register using Kumeran interface
1082 * @hw: pointer to the HW structure
1083 * @offset: the register to read
1084 * @data: the location to store the 16-bit value read.
1085 *
1086 * Reads a register out of the Kumeran interface. Currently no func pointer
1087 * exists and all implementations are handled in the generic version of
1088 * this function.
1089 **/
e1000_read_kmrn_reg(struct e1000_hw * hw,u32 offset,u16 * data)1090 s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
1091 {
1092 return e1000_read_kmrn_reg_generic(hw, offset, data);
1093 }
1094
1095 /**
1096 * e1000_write_kmrn_reg - Writes register using Kumeran interface
1097 * @hw: pointer to the HW structure
1098 * @offset: the register to write
1099 * @data: the value to write.
1100 *
1101 * Writes a register to the Kumeran interface. Currently no func pointer
1102 * exists and all implementations are handled in the generic version of
1103 * this function.
1104 **/
e1000_write_kmrn_reg(struct e1000_hw * hw,u32 offset,u16 data)1105 s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
1106 {
1107 return e1000_write_kmrn_reg_generic(hw, offset, data);
1108 }
1109
1110 /**
1111 * e1000_get_cable_length - Retrieves cable length estimation
1112 * @hw: pointer to the HW structure
1113 *
1114 * This function estimates the cable length and stores them in
1115 * hw->phy.min_length and hw->phy.max_length. This is a function pointer
1116 * entry point called by drivers.
1117 **/
e1000_get_cable_length(struct e1000_hw * hw)1118 s32 e1000_get_cable_length(struct e1000_hw *hw)
1119 {
1120 if (hw->phy.ops.get_cable_length)
1121 return hw->phy.ops.get_cable_length(hw);
1122
1123 return E1000_SUCCESS;
1124 }
1125
1126 /**
1127 * e1000_get_phy_info - Retrieves PHY information from registers
1128 * @hw: pointer to the HW structure
1129 *
1130 * This function gets some information from various PHY registers and
1131 * populates hw->phy values with it. This is a function pointer entry
1132 * point called by drivers.
1133 **/
e1000_get_phy_info(struct e1000_hw * hw)1134 s32 e1000_get_phy_info(struct e1000_hw *hw)
1135 {
1136 if (hw->phy.ops.get_info)
1137 return hw->phy.ops.get_info(hw);
1138
1139 return E1000_SUCCESS;
1140 }
1141
1142 /**
1143 * e1000_phy_hw_reset - Hard PHY reset
1144 * @hw: pointer to the HW structure
1145 *
1146 * Performs a hard PHY reset. This is a function pointer entry point called
1147 * by drivers.
1148 **/
e1000_phy_hw_reset(struct e1000_hw * hw)1149 s32 e1000_phy_hw_reset(struct e1000_hw *hw)
1150 {
1151 if (hw->phy.ops.reset)
1152 return hw->phy.ops.reset(hw);
1153
1154 return E1000_SUCCESS;
1155 }
1156
1157 /**
1158 * e1000_phy_commit - Soft PHY reset
1159 * @hw: pointer to the HW structure
1160 *
1161 * Performs a soft PHY reset on those that apply. This is a function pointer
1162 * entry point called by drivers.
1163 **/
e1000_phy_commit(struct e1000_hw * hw)1164 s32 e1000_phy_commit(struct e1000_hw *hw)
1165 {
1166 if (hw->phy.ops.commit)
1167 return hw->phy.ops.commit(hw);
1168
1169 return E1000_SUCCESS;
1170 }
1171
1172 /**
1173 * e1000_set_d0_lplu_state - Sets low power link up state for D0
1174 * @hw: pointer to the HW structure
1175 * @active: boolean used to enable/disable lplu
1176 *
1177 * Success returns 0, Failure returns 1
1178 *
1179 * The low power link up (lplu) state is set to the power management level D0
1180 * and SmartSpeed is disabled when active is TRUE, else clear lplu for D0
1181 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
1182 * is used during Dx states where the power conservation is most important.
1183 * During driver activity, SmartSpeed should be enabled so performance is
1184 * maintained. This is a function pointer entry point called by drivers.
1185 **/
e1000_set_d0_lplu_state(struct e1000_hw * hw,bool active)1186 s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
1187 {
1188 if (hw->phy.ops.set_d0_lplu_state)
1189 return hw->phy.ops.set_d0_lplu_state(hw, active);
1190
1191 return E1000_SUCCESS;
1192 }
1193
1194 /**
1195 * e1000_set_d3_lplu_state - Sets low power link up state for D3
1196 * @hw: pointer to the HW structure
1197 * @active: boolean used to enable/disable lplu
1198 *
1199 * Success returns 0, Failure returns 1
1200 *
1201 * The low power link up (lplu) state is set to the power management level D3
1202 * and SmartSpeed is disabled when active is TRUE, else clear lplu for D3
1203 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
1204 * is used during Dx states where the power conservation is most important.
1205 * During driver activity, SmartSpeed should be enabled so performance is
1206 * maintained. This is a function pointer entry point called by drivers.
1207 **/
e1000_set_d3_lplu_state(struct e1000_hw * hw,bool active)1208 s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
1209 {
1210 if (hw->phy.ops.set_d3_lplu_state)
1211 return hw->phy.ops.set_d3_lplu_state(hw, active);
1212
1213 return E1000_SUCCESS;
1214 }
1215
1216 /**
1217 * e1000_read_mac_addr - Reads MAC address
1218 * @hw: pointer to the HW structure
1219 *
1220 * Reads the MAC address out of the adapter and stores it in the HW structure.
1221 * Currently no func pointer exists and all implementations are handled in the
1222 * generic version of this function.
1223 **/
e1000_read_mac_addr(struct e1000_hw * hw)1224 s32 e1000_read_mac_addr(struct e1000_hw *hw)
1225 {
1226 if (hw->mac.ops.read_mac_addr)
1227 return hw->mac.ops.read_mac_addr(hw);
1228
1229 return e1000_read_mac_addr_generic(hw);
1230 }
1231
1232 /**
1233 * e1000_read_pba_string - Read device part number string
1234 * @hw: pointer to the HW structure
1235 * @pba_num: pointer to device part number
1236 * @pba_num_size: size of part number buffer
1237 *
1238 * Reads the product board assembly (PBA) number from the EEPROM and stores
1239 * the value in pba_num.
1240 * Currently no func pointer exists and all implementations are handled in the
1241 * generic version of this function.
1242 **/
e1000_read_pba_string(struct e1000_hw * hw,u8 * pba_num,u32 pba_num_size)1243 s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size)
1244 {
1245 return e1000_read_pba_string_generic(hw, pba_num, pba_num_size);
1246 }
1247
1248 /**
1249 * e1000_read_pba_length - Read device part number string length
1250 * @hw: pointer to the HW structure
1251 * @pba_num_size: size of part number buffer
1252 *
1253 * Reads the product board assembly (PBA) number length from the EEPROM and
1254 * stores the value in pba_num.
1255 * Currently no func pointer exists and all implementations are handled in the
1256 * generic version of this function.
1257 **/
e1000_read_pba_length(struct e1000_hw * hw,u32 * pba_num_size)1258 s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size)
1259 {
1260 return e1000_read_pba_length_generic(hw, pba_num_size);
1261 }
1262
1263 /**
1264 * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum
1265 * @hw: pointer to the HW structure
1266 *
1267 * Validates the NVM checksum is correct. This is a function pointer entry
1268 * point called by drivers.
1269 **/
e1000_validate_nvm_checksum(struct e1000_hw * hw)1270 s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
1271 {
1272 if (hw->nvm.ops.validate)
1273 return hw->nvm.ops.validate(hw);
1274
1275 return -E1000_ERR_CONFIG;
1276 }
1277
1278 /**
1279 * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum
1280 * @hw: pointer to the HW structure
1281 *
1282 * Updates the NVM checksum. Currently no func pointer exists and all
1283 * implementations are handled in the generic version of this function.
1284 **/
e1000_update_nvm_checksum(struct e1000_hw * hw)1285 s32 e1000_update_nvm_checksum(struct e1000_hw *hw)
1286 {
1287 if (hw->nvm.ops.update)
1288 return hw->nvm.ops.update(hw);
1289
1290 return -E1000_ERR_CONFIG;
1291 }
1292
1293 /**
1294 * e1000_reload_nvm - Reloads EEPROM
1295 * @hw: pointer to the HW structure
1296 *
1297 * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
1298 * extended control register.
1299 **/
e1000_reload_nvm(struct e1000_hw * hw)1300 void e1000_reload_nvm(struct e1000_hw *hw)
1301 {
1302 if (hw->nvm.ops.reload)
1303 hw->nvm.ops.reload(hw);
1304 }
1305
1306 /**
1307 * e1000_read_nvm - Reads NVM (EEPROM)
1308 * @hw: pointer to the HW structure
1309 * @offset: the word offset to read
1310 * @words: number of 16-bit words to read
1311 * @data: pointer to the properly sized buffer for the data.
1312 *
1313 * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function
1314 * pointer entry point called by drivers.
1315 **/
e1000_read_nvm(struct e1000_hw * hw,u16 offset,u16 words,u16 * data)1316 s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
1317 {
1318 if (hw->nvm.ops.read)
1319 return hw->nvm.ops.read(hw, offset, words, data);
1320
1321 return -E1000_ERR_CONFIG;
1322 }
1323
1324 /**
1325 * e1000_write_nvm - Writes to NVM (EEPROM)
1326 * @hw: pointer to the HW structure
1327 * @offset: the word offset to read
1328 * @words: number of 16-bit words to write
1329 * @data: pointer to the properly sized buffer for the data.
1330 *
1331 * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function
1332 * pointer entry point called by drivers.
1333 **/
e1000_write_nvm(struct e1000_hw * hw,u16 offset,u16 words,u16 * data)1334 s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
1335 {
1336 if (hw->nvm.ops.write)
1337 return hw->nvm.ops.write(hw, offset, words, data);
1338
1339 return E1000_SUCCESS;
1340 }
1341
1342 /**
1343 * e1000_write_8bit_ctrl_reg - Writes 8bit Control register
1344 * @hw: pointer to the HW structure
1345 * @reg: 32bit register offset
1346 * @offset: the register to write
1347 * @data: the value to write.
1348 *
1349 * Writes the PHY register at offset with the value in data.
1350 * This is a function pointer entry point called by drivers.
1351 **/
e1000_write_8bit_ctrl_reg(struct e1000_hw * hw,u32 reg,u32 offset,u8 data)1352 s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset,
1353 u8 data)
1354 {
1355 return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data);
1356 }
1357
1358 /**
1359 * e1000_power_up_phy - Restores link in case of PHY power down
1360 * @hw: pointer to the HW structure
1361 *
1362 * The phy may be powered down to save power, to turn off link when the
1363 * driver is unloaded, or wake on lan is not enabled (among others).
1364 **/
e1000_power_up_phy(struct e1000_hw * hw)1365 void e1000_power_up_phy(struct e1000_hw *hw)
1366 {
1367 if (hw->phy.ops.power_up)
1368 hw->phy.ops.power_up(hw);
1369
1370 e1000_setup_link(hw);
1371 }
1372
1373 /**
1374 * e1000_power_down_phy - Power down PHY
1375 * @hw: pointer to the HW structure
1376 *
1377 * The phy may be powered down to save power, to turn off link when the
1378 * driver is unloaded, or wake on lan is not enabled (among others).
1379 **/
e1000_power_down_phy(struct e1000_hw * hw)1380 void e1000_power_down_phy(struct e1000_hw *hw)
1381 {
1382 if (hw->phy.ops.power_down)
1383 hw->phy.ops.power_down(hw);
1384 }
1385
1386 /**
1387 * e1000_power_up_fiber_serdes_link - Power up serdes link
1388 * @hw: pointer to the HW structure
1389 *
1390 * Power on the optics and PCS.
1391 **/
e1000_power_up_fiber_serdes_link(struct e1000_hw * hw)1392 void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw)
1393 {
1394 if (hw->mac.ops.power_up_serdes)
1395 hw->mac.ops.power_up_serdes(hw);
1396 }
1397
1398 /**
1399 * e1000_shutdown_fiber_serdes_link - Remove link during power down
1400 * @hw: pointer to the HW structure
1401 *
1402 * Shutdown the optics and PCS on driver unload.
1403 **/
e1000_shutdown_fiber_serdes_link(struct e1000_hw * hw)1404 void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw)
1405 {
1406 if (hw->mac.ops.shutdown_serdes)
1407 hw->mac.ops.shutdown_serdes(hw);
1408 }
1409