1 /* 2 * $FreeBSD$ 3 * 4 * Copyright (c) 2002-2004 David Boggs. (boggs@boggs.palo-alto.ca.us) 5 * All rights reserved. 6 * 7 * BSD License: 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * GNU General Public License: 31 * 32 * This program is free software; you can redistribute it and/or modify it 33 * under the terms of the GNU General Public License as published by the Free 34 * Software Foundation; either version 2 of the License, or (at your option) 35 * any later version. 36 * 37 * This program is distributed in the hope that it will be useful, but WITHOUT 38 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 39 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 40 * more details. 41 * 42 * You should have received a copy of the GNU General Public License along with 43 * this program; if not, write to the Free Software Foundation, Inc., 59 44 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. 45 */ 46 47 #ifndef IF_LMC_H 48 #define IF_LMC_H 49 50 #define DEVICE_NAME "lmc" 51 52 /* Linux RPM-style version information */ 53 #define DRIVER_MAJOR_VERSION 2005 /* year */ 54 #define DRIVER_MINOR_VERSION 9 /* month */ 55 #define DRIVER_SUB_VERSION 29 /* day */ 56 57 /* netgraph stuff */ 58 #define NG_LMC_NODE_TYPE DEVICE_NAME 59 #define NGM_LMC_COOKIE 1128054761 /* date -u +'%s' */ 60 61 /* Tulip PCI configuration registers */ 62 #define TLP_CFID 0x00 /* 0: CFg ID register */ 63 #define TLP_CFCS 0x04 /* 1: CFg Command/Status */ 64 #define TLP_CFRV 0x08 /* 2: CFg ReVision */ 65 #define TLP_CFLT 0x0C /* 3: CFg Latency Timer */ 66 #define TLP_CBIO 0x10 /* 4: Cfg Base IO address */ 67 #define TLP_CBMA 0x14 /* 5: Cfg Base Mem Addr */ 68 #define TLP_CSID 0x2C /* 11: Cfg Subsys ID reg */ 69 #define TLP_CFIT 0x3C /* 15: CFg InTerrupt */ 70 #define TLP_CFDD 0x40 /* 16: CFg Driver Data */ 71 72 #define TLP_CFID_TULIP 0x00091011 /* DEC 21140A Ethernet chip */ 73 74 #define TLP_CFCS_MSTR_ABORT 0x20000000 75 #define TLP_CFCS_TARG_ABORT 0x10000000 76 #define TLP_CFCS_SYS_ERROR 0x00000100 77 #define TLP_CFCS_PAR_ERROR 0x00000040 78 #define TLP_CFCS_MWI_ENABLE 0x00000010 79 #define TLP_CFCS_BUS_MASTER 0x00000004 80 #define TLP_CFCS_MEM_ENABLE 0x00000002 81 #define TLP_CFCS_IO_ENABLE 0x00000001 82 83 #define TLP_CFLT_LATENCY 0x0000FF00 84 #define TLP_CFLT_CACHE 0x000000FF 85 86 #define TLP_CSID_HSSI 0x00031376 /* LMC 5200 HSSI card */ 87 #define TLP_CSID_T3 0x00041376 /* LMC 5245 T3 card */ 88 #define TLP_CSID_SSI 0x00051376 /* LMC 1000 SSI card */ 89 #define TLP_CSID_T1E1 0x00061376 /* LMC 1200 T1E1 card */ 90 #define TLP_CSID_HSSIc 0x00071376 /* LMC 5200 HSSI cPCI */ 91 #define TLP_CSID_SDSL 0x00081376 /* LMC 1168 SDSL card */ 92 93 #define TLP_CFIT_MAX_LAT 0xFF000000 94 95 #define TLP_CFDD_SLEEP 0x80000000 96 #define TLP_CFDD_SNOOZE 0x40000000 97 98 /* Tulip Control and Status Registers */ 99 #define TLP_CSR_STRIDE 8 /* 64 bits */ 100 #define TLP_BUS_MODE 0 * TLP_CSR_STRIDE 101 #define TLP_TX_POLL 1 * TLP_CSR_STRIDE 102 #define TLP_RX_POLL 2 * TLP_CSR_STRIDE 103 #define TLP_RX_LIST 3 * TLP_CSR_STRIDE 104 #define TLP_TX_LIST 4 * TLP_CSR_STRIDE 105 #define TLP_STATUS 5 * TLP_CSR_STRIDE 106 #define TLP_OP_MODE 6 * TLP_CSR_STRIDE 107 #define TLP_INT_ENBL 7 * TLP_CSR_STRIDE 108 #define TLP_MISSED 8 * TLP_CSR_STRIDE 109 #define TLP_SROM_MII 9 * TLP_CSR_STRIDE 110 #define TLP_BIOS_ROM 10 * TLP_CSR_STRIDE 111 #define TLP_TIMER 11 * TLP_CSR_STRIDE 112 #define TLP_GPIO 12 * TLP_CSR_STRIDE 113 #define TLP_CSR13 13 * TLP_CSR_STRIDE 114 #define TLP_CSR14 14 * TLP_CSR_STRIDE 115 #define TLP_WDOG 15 * TLP_CSR_STRIDE 116 #define TLP_CSR_SIZE 128 /* IO bus space size */ 117 118 /* CSR 0 - PCI Bus Mode Register */ 119 #define TLP_BUS_WRITE_INVAL 0x01000000 /* DONT USE! */ 120 #define TLP_BUS_READ_LINE 0x00800000 121 #define TLP_BUS_READ_MULT 0x00200000 122 #define TLP_BUS_DESC_BIGEND 0x00100000 123 #define TLP_BUS_TAP 0x000E0000 124 #define TLP_BUS_CAL 0x0000C000 125 #define TLP_BUS_PBL 0x00003F00 126 #define TLP_BUS_DATA_BIGEND 0x00000080 127 #define TLP_BUS_DSL 0x0000007C 128 #define TLP_BUS_ARB 0x00000002 129 #define TLP_BUS_RESET 0x00000001 130 #define TLP_BUS_CAL_SHIFT 14 131 #define TLP_BUS_PBL_SHIFT 8 132 133 /* CSR 5 - Status Register */ 134 #define TLP_STAT_FATAL_BITS 0x03800000 135 #define TLP_STAT_TX_FSM 0x00700000 136 #define TLP_STAT_RX_FSM 0x000E0000 137 #define TLP_STAT_FATAL_ERROR 0x00002000 138 #define TLP_STAT_TX_UNDERRUN 0x00000020 139 #define TLP_STAT_FATAL_SHIFT 23 140 141 /* CSR 6 - Operating Mode Register */ 142 #define TLP_OP_RECEIVE_ALL 0x40000000 143 #define TLP_OP_MUST_BE_ONE 0x02000000 144 #define TLP_OP_NO_HEART_BEAT 0x00080000 145 #define TLP_OP_PORT_SELECT 0x00040000 146 #define TLP_OP_TX_THRESH 0x0000C000 147 #define TLP_OP_TX_RUN 0x00002000 148 #define TLP_OP_LOOP_MODE 0x00000C00 149 #define TLP_OP_EXT_LOOP 0x00000800 150 #define TLP_OP_INT_LOOP 0x00000400 151 #define TLP_OP_FULL_DUPLEX 0x00000200 152 #define TLP_OP_PROMISCUOUS 0x00000040 153 #define TLP_OP_PASS_BAD_PKT 0x00000008 154 #define TLP_OP_RX_RUN 0x00000002 155 #define TLP_OP_TR_SHIFT 14 156 #define TLP_OP_INIT (TLP_OP_PORT_SELECT | \ 157 TLP_OP_FULL_DUPLEX | \ 158 TLP_OP_MUST_BE_ONE | \ 159 TLP_OP_NO_HEART_BEAT | \ 160 TLP_OP_RECEIVE_ALL | \ 161 TLP_OP_PROMISCUOUS | \ 162 TLP_OP_PASS_BAD_PKT | \ 163 TLP_OP_RX_RUN | \ 164 TLP_OP_TX_RUN) 165 166 /* CSR 7 - Interrupt Enable Register */ 167 #define TLP_INT_NORMAL_INTR 0x00010000 168 #define TLP_INT_ABNRML_INTR 0x00008000 169 #define TLP_INT_FATAL_ERROR 0x00002000 170 #define TLP_INT_RX_NO_BUFS 0x00000080 171 #define TLP_INT_RX_INTR 0x00000040 172 #define TLP_INT_TX_UNDERRUN 0x00000020 173 #define TLP_INT_TX_INTR 0x00000001 174 #define TLP_INT_DISABLE 0 175 #define TLP_INT_TX (TLP_INT_NORMAL_INTR | \ 176 TLP_INT_ABNRML_INTR | \ 177 TLP_INT_FATAL_ERROR | \ 178 TLP_INT_TX_UNDERRUN | \ 179 TLP_INT_TX_INTR) 180 #define TLP_INT_RX (TLP_INT_NORMAL_INTR | \ 181 TLP_INT_ABNRML_INTR | \ 182 TLP_INT_FATAL_ERROR | \ 183 TLP_INT_RX_NO_BUFS | \ 184 TLP_INT_RX_INTR) 185 #define TLP_INT_TXRX (TLP_INT_TX | TLP_INT_RX) 186 187 /* CSR 8 - RX Missed Frames & Overrun Register */ 188 #define TLP_MISS_OCO 0x10000000 189 #define TLP_MISS_OVERRUN 0x0FFE0000 190 #define TLP_MISS_MFO 0x00010000 191 #define TLP_MISS_MISSED 0x0000FFFF 192 #define TLP_OVERRUN_SHIFT 17 193 194 /* CSR 9 - SROM & MII & Boot ROM Register */ 195 #define TLP_MII_MDIN 0x00080000 196 #define TLP_MII_MDOE 0x00040000 197 #define TLP_MII_MDOUT 0x00020000 198 #define TLP_MII_MDC 0x00010000 199 200 #define TLP_BIOS_RD 0x00004000 201 #define TLP_BIOS_WR 0x00002000 202 #define TLP_BIOS_SEL 0x00001000 203 204 #define TLP_SROM_RD 0x00004000 205 #define TLP_SROM_SEL 0x00000800 206 #define TLP_SROM_DOUT 0x00000008 207 #define TLP_SROM_DIN 0x00000004 208 #define TLP_SROM_CLK 0x00000002 209 #define TLP_SROM_CS 0x00000001 210 211 /* CSR 12 - General Purpose IO register */ 212 #define TLP_GPIO_DIR 0x00000100 213 214 /* CSR 15 - Watchdog Timer Register */ 215 #define TLP_WDOG_RX_OFF 0x00000010 216 #define TLP_WDOG_TX_OFF 0x00000001 217 #define TLP_WDOG_INIT (TLP_WDOG_TX_OFF | \ 218 TLP_WDOG_RX_OFF) 219 220 /* GPIO bits common to all cards */ 221 #define GPIO_INIT 0x01 /* from Xilinx */ 222 #define GPIO_RESET 0x02 /* to Xilinx */ 223 /* bits 2 and 3 vary with board type -- see below */ 224 #define GPIO_MODE 0x10 /* to Xilinx */ 225 #define GPIO_DP 0x20 /* to/from Xilinx */ 226 #define GPIO_DATA 0x40 /* serial data */ 227 #define GPIO_CLK 0x80 /* serial clock */ 228 229 /* HSSI GPIO bits */ 230 #define GPIO_HSSI_ST 0x04 /* send timing sense (deprecated) */ 231 #define GPIO_HSSI_TXCLK 0x08 /* clock source */ 232 233 /* HSSIc GPIO bits */ 234 #define GPIO_HSSI_SYNTH 0x04 /* Synth osc chip select */ 235 #define GPIO_HSSI_DCE 0x08 /* provide clock on TXCLOCK output */ 236 237 /* T3 GPIO bits */ 238 #define GPIO_T3_DAC 0x04 /* DAC chip select */ 239 #define GPIO_T3_INTEN 0x08 /* Framer Interupt enable */ 240 241 /* SSI GPIO bits */ 242 #define GPIO_SSI_SYNTH 0x04 /* Synth osc chip select */ 243 #define GPIO_SSI_DCE 0x08 /* provide clock on TXCLOCK output */ 244 245 /* T1E1 GPIO bits */ 246 #define GPIO_T1_INTEN 0x08 /* Framer Interupt enable */ 247 248 /* MII register 16 bits common to all cards */ 249 /* NB: LEDs for HSSI & SSI are in DIFFERENT bits than for T1E1 & T3; oops */ 250 /* NB: CRC32 for HSSI & SSI is in DIFFERENT bit than for T1E1 & T3; oops */ 251 #define MII16_LED_ALL 0x0780 /* RW: LED bit mask */ 252 #define MII16_FIFO 0x0800 /* RW: 1=reset, 0=not reset */ 253 254 /* MII register 16 bits for HSSI */ 255 #define MII16_HSSI_TA 0x0001 /* RW: host ready; host->modem */ 256 #define MII16_HSSI_CA 0x0002 /* RO: modem ready; modem->host */ 257 #define MII16_HSSI_LA 0x0004 /* RW: loopback A; host->modem */ 258 #define MII16_HSSI_LB 0x0008 /* RW: loopback B; host->modem */ 259 #define MII16_HSSI_LC 0x0010 /* RO: loopback C; modem->host */ 260 #define MII16_HSSI_TM 0x0020 /* RO: test mode; modem->host */ 261 #define MII16_HSSI_CRC32 0x0040 /* RW: CRC length 16/32 */ 262 #define MII16_HSSI_LED_LL 0x0080 /* RW: lower left - green */ 263 #define MII16_HSSI_LED_LR 0x0100 /* RW: lower right - green */ 264 #define MII16_HSSI_LED_UL 0x0200 /* RW: upper left - green */ 265 #define MII16_HSSI_LED_UR 0x0400 /* RW: upper right - red */ 266 #define MII16_HSSI_FIFO 0x0800 /* RW: reset fifos */ 267 #define MII16_HSSI_FORCECA 0x1000 /* RW: [cPCI] force CA on */ 268 #define MII16_HSSI_CLKMUX 0x6000 /* RW: [cPCI] TX clock selection */ 269 #define MII16_HSSI_LOOP 0x8000 /* RW: [cPCI] LOOP TX into RX */ 270 #define MII16_HSSI_MODEM 0x003F /* TA+CA+LA+LB+LC+TM */ 271 272 /* MII register 16 bits for DS3 */ 273 #define MII16_DS3_ZERO 0x0001 /* RW: short/long cables */ 274 #define MII16_DS3_TRLBK 0x0002 /* RW: loop towards host */ 275 #define MII16_DS3_LNLBK 0x0004 /* RW: loop towards net */ 276 #define MII16_DS3_RAIS 0x0008 /* RO: LIU receive AIS (depr) */ 277 #define MII16_DS3_TAIS 0x0010 /* RW: LIU transmit AIS (depr) */ 278 #define MII16_DS3_BIST 0x0020 /* RO: LIU QRSS patt match (depr) */ 279 #define MII16_DS3_DLOS 0x0040 /* RO: LIU Digital LOS (depr) */ 280 #define MII16_DS3_LED_BLU 0x0080 /* RW: lower right - blue */ 281 #define MII16_DS3_LED_YEL 0x0100 /* RW: lower left - yellow */ 282 #define MII16_DS3_LED_RED 0x0200 /* RW: upper right - red */ 283 #define MII16_DS3_LED_GRN 0x0400 /* RW: upper left - green */ 284 #define MII16_DS3_FIFO 0x0800 /* RW: reset fifos */ 285 #define MII16_DS3_CRC32 0x1000 /* RW: CRC length 16/32 */ 286 #define MII16_DS3_SCRAM 0x2000 /* RW: payload scrambler */ 287 #define MII16_DS3_POLY 0x4000 /* RW: 1=Larse, 0=DigLink|Kentrox */ 288 #define MII16_DS3_FRAME 0x8000 /* RW: 1=stop txframe pulses */ 289 290 /* MII register 16 bits for SSI */ 291 #define MII16_SSI_DTR 0x0001 /* RW: DTR host->modem */ 292 #define MII16_SSI_DSR 0x0002 /* RO: DSR modem->host */ 293 #define MII16_SSI_RTS 0x0004 /* RW: RTS host->modem */ 294 #define MII16_SSI_CTS 0x0008 /* RO: CTS modem->host */ 295 #define MII16_SSI_DCD 0x0010 /* RW: DCD modem<->host */ 296 #define MII16_SSI_RI 0x0020 /* RO: RI modem->host */ 297 #define MII16_SSI_CRC32 0x0040 /* RW: CRC length 16/32 */ 298 #define MII16_SSI_LED_LL 0x0080 /* RW: lower left - green */ 299 #define MII16_SSI_LED_LR 0x0100 /* RW: lower right - green */ 300 #define MII16_SSI_LED_UL 0x0200 /* RW: upper left - green */ 301 #define MII16_SSI_LED_UR 0x0400 /* RW: upper right - red */ 302 #define MII16_SSI_FIFO 0x0800 /* RW: reset fifos */ 303 #define MII16_SSI_LL 0x1000 /* RW: LL: host->modem */ 304 #define MII16_SSI_RL 0x2000 /* RW: RL: host->modem */ 305 #define MII16_SSI_TM 0x4000 /* RO: TM: modem->host */ 306 #define MII16_SSI_LOOP 0x8000 /* RW: Loop at ext conn */ 307 #define MII16_SSI_MODEM 0x703F /* DTR+DSR+RTS+CTS+DCD+RI+LL+RL+TM */ 308 309 /* Mii register 17 has the SSI cable bits */ 310 #define MII17_SSI_CABLE_SHIFT 3 /* shift to get cable type */ 311 #define MII17_SSI_CABLE_MASK 0x0038 /* RO: mask to get cable type */ 312 #define MII17_SSI_PRESCALE 0x0040 /* RW: divide by: 0=16; 1=512 */ 313 #define MII17_SSI_ITF 0x0100 /* RW: fill with: 0=flags; 1=ones */ 314 #define MII17_SSI_NRZI 0x0400 /* RW: coding: NRZ= 0; NRZI=1 */ 315 316 /* MII register 16 bits for T1/E1 */ 317 #define MII16_T1_UNUSED1 0x0001 318 #define MII16_T1_INVERT 0x0002 /* RW: invert data (for SF/AMI) */ 319 #define MII16_T1_XOE 0x0004 /* RW: TX Output Enable; 0=disable */ 320 #define MII16_T1_RST 0x0008 /* RW: Bt8370 chip reset */ 321 #define MII16_T1_Z 0x0010 /* RW: output impedance T1=1 E1=0 */ 322 #define MII16_T1_INTR 0x0020 /* RO: interrupt from Bt8370 */ 323 #define MII16_T1_ONESEC 0x0040 /* RO: one second square wave */ 324 #define MII16_T1_LED_BLU 0x0080 /* RW: lower right - blue */ 325 #define MII16_T1_LED_YEL 0x0100 /* RW: lower left - yellow */ 326 #define MII16_T1_LED_RED 0x0200 /* RW: upper right - red */ 327 #define MII16_T1_LED_GRN 0x0400 /* RW: upper left - green */ 328 #define MII16_T1_FIFO 0x0800 /* RW: reset fifos */ 329 #define MII16_T1_CRC32 0x1000 /* RW: CRC length 16/32 */ 330 #define MII16_T1_UNUSED2 0xE000 331 332 /* T3 framer: RW=Read/Write; RO=Read-Only; RC=Read/Clr; WO=Write-Only */ 333 #define T3CSR_STAT0 0x00 /* RO: real-time status */ 334 #define T3CSR_CTL1 0x01 /* RW: global control bits */ 335 #define T3CSR_FEBE 0x02 /* RC: Far End Block Error Counter */ 336 #define T3CSR_CERR 0x03 /* RC: C-bit Parity Error Counter */ 337 #define T3CSR_PERR 0x04 /* RC: P-bit Parity Error Counter */ 338 #define T3CSR_TX_FEAC 0x05 /* RW: Far End Alarm & Control */ 339 #define T3CSR_RX_FEAC 0x06 /* RO: Far End Alarm & Control */ 340 #define T3CSR_STAT7 0x07 /* RL: latched real-time status */ 341 #define T3CSR_CTL8 0x08 /* RW: extended global ctl bits */ 342 #define T3CSR_STAT9 0x09 /* RL: extended status bits */ 343 #define T3CSR_FERR 0x0A /* RC: F-bit Error Counter */ 344 #define T3CSR_MERR 0x0B /* RC: M-bit Error Counter */ 345 #define T3CSR_CTL12 0x0C /* RW: more extended ctl bits */ 346 #define T3CSR_DBL_FEAC 0x0D /* RW: TX double FEAC */ 347 #define T3CSR_CTL14 0x0E /* RW: even more extended ctl bits */ 348 #define T3CSR_FEAC_STK 0x0F /* RO: RX FEAC stack */ 349 #define T3CSR_STAT16 0x10 /* RL: extended latched status */ 350 #define T3CSR_INTEN 0x11 /* RW: interrupt enable */ 351 #define T3CSR_CVLO 0x12 /* RC: coding violation cntr LSB */ 352 #define T3CSR_CVHI 0x13 /* RC: coding violation cntr MSB */ 353 #define T3CSR_CTL20 0x14 /* RW: yet more extended ctl bits */ 354 355 #define CTL1_XTX 0x01 /* Transmit X-bit value */ 356 #define CTL1_3LOOP 0x02 /* framer loop back */ 357 #define CTL1_SER 0x04 /* SERial interface selected */ 358 #define CTL1_M13MODE 0x08 /* M13 frame format */ 359 #define CTL1_TXIDL 0x10 /* Transmit Idle signal */ 360 #define CTL1_ENAIS 0x20 /* Enable AIS upon LOS */ 361 #define CTL1_TXAIS 0x40 /* Transmit Alarm Indication Sig */ 362 #define CTL1_NOFEBE 0x80 /* No Far End Block Errors */ 363 364 #define CTL5_EMODE 0x80 /* rev B Extended features enabled */ 365 #define CTL5_START 0x40 /* transmit the FEAC msg now */ 366 367 #define CTL8_FBEC 0x80 /* F-Bit Error Count control */ 368 #define CTL8_TBLU 0x20 /* Transmit Blue signal */ 369 370 #define STAT9_SEF 0x80 /* Severely Errored Frame */ 371 #define STAT9_RBLU 0x20 /* Receive Blue signal */ 372 373 #define CTL12_RTPLLEN 0x80 /* Rx-to-Tx Payload Lpbk Lock ENbl */ 374 #define CTL12_RTPLOOP 0x40 /* Rx-to-Tx Payload Loopback */ 375 #define CTL12_DLCB1 0x08 /* Data Link C-Bits forced to 1 */ 376 #define CTL12_C21 0x04 /* C2 forced to 1 */ 377 #define CTL12_MCB1 0x02 /* Most C-Bits forced to 1 */ 378 379 #define CTL13_DFEXEC 0x40 /* Execute Double FEAC */ 380 381 #define CTL14_FEAC10 0x80 /* Transmit FEAC word 10 times */ 382 #define CTL14_RGCEN 0x20 /* Receive Gapped Clock Out Enbl */ 383 #define CTL14_TGCEN 0x10 /* Timing Gen Gapped Clk Out Enbl */ 384 385 #define FEAC_STK_MORE 0x80 /* FEAC stack has more FEACs */ 386 #define FEAC_STK_VALID 0x40 /* FEAC stack is valid */ 387 #define FEAC_STK_FEAC 0x3F /* FEAC stack FEAC data */ 388 389 #define STAT16_XERR 0x01 /* X-bit Error */ 390 #define STAT16_SEF 0x02 /* Severely Errored Frame */ 391 #define STAT16_RTLOC 0x04 /* Rx/Tx Loss Of Clock */ 392 #define STAT16_FEAC 0x08 /* new FEAC msg */ 393 #define STAT16_RIDL 0x10 /* channel IDLe signal */ 394 #define STAT16_RAIS 0x20 /* Alarm Indication Signal */ 395 #define STAT16_ROOF 0x40 /* Out Of Frame sync */ 396 #define STAT16_RLOS 0x80 /* Loss Of Signal */ 397 398 #define CTL20_CVEN 0x01 /* Coding Violation Counter Enbl */ 399 400 /* T1.107 Bit Oriented C-Bit Parity Far End Alarm Control and Status codes */ 401 #define T3BOP_OOF 0x00 /* Yellow alarm status */ 402 #define T3BOP_LINE_UP 0x07 /* line loopback activate */ 403 #define T3BOP_LINE_DOWN 0x1C /* line loopback deactivate */ 404 #define T3BOP_LOOP_DS3 0x1B /* loopback full DS3 */ 405 #define T3BOP_IDLE 0x1A /* IDLE alarm status */ 406 #define T3BOP_AIS 0x16 /* AIS alarm status */ 407 #define T3BOP_LOS 0x0E /* LOS alarm status */ 408 409 /* T1E1 regs; RW=Read/Write; RO=Read-Only; RC=Read/Clr; WO=Write-Only */ 410 #define Bt8370_DID 0x000 /* RO: Device ID */ 411 #define Bt8370_CR0 0x001 /* RW; Primary Control Register */ 412 #define Bt8370_JAT_CR 0x002 /* RW: Jitter Attenuator CR */ 413 #define Bt8370_IRR 0x003 /* RO: Interrupt Request Reg */ 414 #define Bt8370_ISR7 0x004 /* RC: Alarm 1 Interrupt Status */ 415 #define Bt8370_ISR6 0x005 /* RC: Alarm 2 Interrupt Status */ 416 #define Bt8370_ISR5 0x006 /* RC: Error Interrupt Status */ 417 #define Bt8370_ISR4 0x007 /* RC; Cntr Ovfl Interrupt Status */ 418 #define Bt8370_ISR3 0x008 /* RC: Timer Interrupt Status */ 419 #define Bt8370_ISR2 0x009 /* RC: Data Link 1 Int Status */ 420 #define Bt8370_ISR1 0x00A /* RC: Data Link 2 Int Status */ 421 #define Bt8370_ISR0 0x00B /* RC: Pattrn Interrupt Status */ 422 #define Bt8370_IER7 0x00C /* RW: Alarm 1 Interrupt Enable */ 423 #define Bt8370_IER6 0x00D /* RW: Alarm 2 Interrupt Enable */ 424 #define Bt8370_IER5 0x00E /* RW: Error Interrupt Enable */ 425 #define Bt8370_IER4 0x00F /* RW: Cntr Ovfl Interrupt Enable */ 426 427 #define Bt8370_IER3 0x010 /* RW: Timer Interrupt Enable */ 428 #define Bt8370_IER2 0x011 /* RW: Data Link 1 Int Enable */ 429 #define Bt8370_IER1 0x012 /* RW: Data Link 2 Int Enable */ 430 #define Bt8370_IER0 0x013 /* RW: Pattern Interrupt Enable */ 431 #define Bt8370_LOOP 0x014 /* RW: Loopback Config Reg */ 432 #define Bt8370_DL3_TS 0x015 /* RW: External Data Link Channel */ 433 #define Bt8370_DL3_BIT 0x016 /* RW: External Data Link Bit */ 434 #define Bt8370_FSTAT 0x017 /* RO: Offline Framer Status */ 435 #define Bt8370_PIO 0x018 /* RW: Programmable Input/Output */ 436 #define Bt8370_POE 0x019 /* RW: Programmable Output Enable */ 437 #define Bt8370_CMUX 0x01A /* RW: Clock Input Mux */ 438 #define Bt8370_TMUX 0x01B /* RW: Test Mux Config */ 439 #define Bt8370_TEST 0x01C /* RW: Test Config */ 440 441 #define Bt8370_LIU_CR 0x020 /* RW: Line Intf Unit Config Reg */ 442 #define Bt8370_RSTAT 0x021 /* RO; Receive LIU Status */ 443 #define Bt8370_RLIU_CR 0x022 /* RW: Receive LIU Config */ 444 #define Bt8370_LPF 0x023 /* RW: RPLL Low Pass Filter */ 445 #define Bt8370_VGA_MAX 0x024 /* RW: Variable Gain Amplifier Max */ 446 #define Bt8370_EQ_DAT 0x025 /* RW: Equalizer Coeff Data Reg */ 447 #define Bt8370_EQ_PTR 0x026 /* RW: Equzlizer Coeff Table Ptr */ 448 #define Bt8370_DSLICE 0x027 /* RW: Data Slicer Threshold */ 449 #define Bt8370_EQ_OUT 0x028 /* RW: Equalizer Output Levels */ 450 #define Bt8370_VGA 0x029 /* RO: Variable Gain Ampl Status */ 451 #define Bt8370_PRE_EQ 0x02A /* RW: Pre-Equalizer */ 452 453 #define Bt8370_COEFF0 0x030 /* RO: LMS Adj Eq Coeff Status */ 454 #define Bt8370_GAIN0 0x038 /* RW: Equalizer Gain Thresh */ 455 #define Bt8370_GAIN1 0x039 /* RW: Equalizer Gain Thresh */ 456 #define Bt8370_GAIN2 0x03A /* RW: Equalizer Gain Thresh */ 457 #define Bt8370_GAIN3 0x03B /* RW: Equalizer Gain Thresh */ 458 #define Bt8370_GAIN4 0x03C /* RW: Equalizer Gain Thresh */ 459 460 #define Bt8370_RCR0 0x040 /* RW: Rx Configuration */ 461 #define Bt8370_RPATT 0x041 /* RW: Rx Test Pattern Config */ 462 #define Bt8370_RLB 0x042 /* RW: Rx Loopback Code Detr Conf */ 463 #define Bt8370_LBA 0x043 /* RW: Loopback Activate Code Patt */ 464 #define Bt8370_LBD 0x044 /* RW: Loopback Deact Code Patt */ 465 #define Bt8370_RALM 0x045 /* RW: Rx Alarm Signal Config */ 466 #define Bt8370_LATCH 0x046 /* RW: Alarm/Err/Cntr Latch Config */ 467 #define Bt8370_ALM1 0x047 /* RO: Alarm 1 Status */ 468 #define Bt8370_ALM2 0x048 /* RO: Alarm 2 Status */ 469 #define Bt8370_ALM3 0x049 /* RO: Alarm 3 Status */ 470 471 #define Bt8370_FERR_LO 0x050 /* RC: Framing Bit Error Cntr LSB */ 472 #define Bt8370_FERR_HI 0x051 /* RC: Framing Bit Error Cntr MSB */ 473 #define Bt8370_CRC_LO 0x052 /* RC: CRC Error Counter LSB */ 474 #define Bt8370_CRC_HI 0x053 /* RC: CRC Error Counter MSB */ 475 #define Bt8370_LCV_LO 0x054 /* RC: Line Code Viol Counter LSB */ 476 #define Bt8370_LCV_HI 0x055 /* RC: Line Code Viol Counter MSB */ 477 #define Bt8370_FEBE_LO 0x056 /* RC: Far End Block Err Cntr LSB */ 478 #define Bt8370_FEBE_HI 0x057 /* RC: Far End Block Err Cntr MSB */ 479 #define Bt8370_BERR_LO 0x058 /* RC: PRBS Bit Error Counter LSB */ 480 #define Bt8370_BERR_HI 0x059 /* RC: PRBS Bit Error Counter MSB */ 481 #define Bt8370_AERR 0x05A /* RC: SEF/LOF/COFA counter */ 482 #define Bt8370_RSA4 0x05B /* RO: Rx Sa4 Byte Buffer */ 483 #define Bt8370_RSA5 0x05C /* RO: Rx Sa5 Byte Buffer */ 484 #define Bt8370_RSA6 0x05D /* RO: Rx Sa6 Byte Buffer */ 485 #define Bt8370_RSA7 0x05E /* RO: Rx Sa7 Byte Buffer */ 486 #define Bt8370_RSA8 0x05F /* RO: Rx Sa8 Byte Buffer */ 487 488 #define Bt8370_SHAPE0 0x060 /* RW: Tx Pulse Shape Config */ 489 #define Bt8370_TLIU_CR 0x068 /* RW: Tx LIU Config Reg */ 490 491 #define Bt8370_TCR0 0x070 /* RW: Tx Framer Config */ 492 #define Bt8370_TCR1 0x071 /* RW: Txter Configuration */ 493 #define Bt8370_TFRM 0x072 /* RW: Tx Frame Format */ 494 #define Bt8370_TERROR 0x073 /* RW: Tx Error Insert */ 495 #define Bt8370_TMAN 0x074 /* RW: Tx Manual Sa/FEBE Config */ 496 #define Bt8370_TALM 0x075 /* RW: Tx Alarm Signal Config */ 497 #define Bt8370_TPATT 0x076 /* RW: Tx Test Pattern Config */ 498 #define Bt8370_TLB 0x077 /* RW: Tx Inband Loopback Config */ 499 #define Bt8370_LBP 0x078 /* RW: Tx Inband Loopback Patt */ 500 #define Bt8370_TSA4 0x07B /* RW: Tx Sa4 Byte Buffer */ 501 #define Bt8370_TSA5 0x07C /* RW: Tx Sa5 Byte Buffer */ 502 #define Bt8370_TSA6 0x07D /* RW: Tx Sa6 Byte Buffer */ 503 #define Bt8370_TSA7 0x07E /* RW: Tx Sa7 Byte Buffer */ 504 #define Bt8370_TSA8 0x07F /* RW: Tx Sa8 Byte Buffer */ 505 506 #define Bt8370_CLAD_CR 0x090 /* RW: Clock Rate Adapter Config */ 507 #define Bt8370_CSEL 0x091 /* RW: CLAD Frequency Select */ 508 #define Bt8370_CPHASE 0x092 /* RW: CLAD Phase Det Scale Factor */ 509 #define Bt8370_CTEST 0x093 /* RW: CLAD Test */ 510 511 #define Bt8370_BOP 0x0A0 /* RW: Bit Oriented Protocol Xcvr */ 512 #define Bt8370_TBOP 0x0A1 /* RW: Tx BOP Codeword */ 513 #define Bt8370_RBOP 0x0A2 /* RO; Rx BOP Codeword */ 514 #define Bt8370_BOP_STAT 0x0A3 /* RO: BOP Status */ 515 #define Bt8370_DL1_TS 0x0A4 /* RW: DL1 Time Slot Enable */ 516 #define Bt8370_DL1_BIT 0x0A5 /* RW: DL1 Bit Enable */ 517 #define Bt8370_DL1_CTL 0x0A6 /* RW: DL1 Control */ 518 #define Bt8370_RDL1_FFC 0x0A7 /* RW: RDL1 FIFO Fill Control */ 519 #define Bt8370_RDL1 0x0A8 /* RO: RDL1 FIFO */ 520 #define Bt8370_RDL1_STAT 0x0A9 /* RO: RDL1 Status */ 521 #define Bt8370_PRM 0x0AA /* RW: Performance Report Message */ 522 #define Bt8370_TDL1_FEC 0x0AB /* RW: TDL1 FIFO Empty Control */ 523 #define Bt8370_TDL1_EOM 0x0AC /* WO: TDL1 End Of Message Control */ 524 #define Bt8370_TDL1 0x0AD /* RW: TDL1 FIFO */ 525 #define Bt8370_TDL1_STAT 0x0AE /* RO: TDL1 Status */ 526 #define Bt8370_DL2_TS 0x0AF /* RW: DL2 Time Slot Enable */ 527 528 #define Bt8370_DL2_BIT 0x0B0 /* RW: DL2 Bit Enable */ 529 #define Bt8370_DL2_CTL 0x0B1 /* RW: DL2 Control */ 530 #define Bt8370_RDL2_FFC 0x0B2 /* RW: RDL2 FIFO Fill Control */ 531 #define Bt8370_RDL2 0x0B3 /* RO: RDL2 FIFO */ 532 #define Bt8370_RDL2_STAT 0x0B4 /* RO: RDL2 Status */ 533 #define Bt8370_TDL2_FEC 0x0B6 /* RW: TDL2 FIFO Empty Control */ 534 #define Bt8370_TDL2_EOM 0x0B7 /* WO; TDL2 End Of Message Control */ 535 #define Bt8370_TDL2 0x0B8 /* RW: TDL2 FIFO */ 536 #define Bt8370_TDL2_STAT 0x0B9 /* RO: TDL2 Status */ 537 #define Bt8370_DL_TEST1 0x0BA /* RW: DLINK Test Config */ 538 #define Bt8370_DL_TEST2 0x0BB /* RW: DLINK Test Status */ 539 #define Bt8370_DL_TEST3 0x0BC /* RW: DLINK Test Status */ 540 #define Bt8370_DL_TEST4 0x0BD /* RW: DLINK Test Control */ 541 #define Bt8370_DL_TEST5 0x0BE /* RW: DLINK Test Control */ 542 543 #define Bt8370_SBI_CR 0x0D0 /* RW: System Bus Interface Config */ 544 #define Bt8370_RSB_CR 0x0D1 /* RW: Rx System Bus Config */ 545 #define Bt8370_RSYNC_BIT 0x0D2 /* RW: Rx System Bus Sync Bit Offs */ 546 #define Bt8370_RSYNC_TS 0x0D3 /* RW: Rx System Bus Sync TS Offs */ 547 #define Bt8370_TSB_CR 0x0D4 /* RW: Tx System Bus Config */ 548 #define Bt8370_TSYNC_BIT 0x0D5 /* RW: Tx System Bus Sync Bit OFfs */ 549 #define Bt8370_TSYNC_TS 0x0D6 /* RW: Tx System Bus Sync TS Offs */ 550 #define Bt8370_RSIG_CR 0x0D7 /* RW: Rx Siganalling Config */ 551 #define Bt8370_RSYNC_FRM 0x0D8 /* RW: Sig Reinsertion Frame Offs */ 552 #define Bt8370_SSTAT 0x0D9 /* RO: Slip Buffer Status */ 553 #define Bt8370_STACK 0x0DA /* RO: Rx Signalling Stack */ 554 #define Bt8370_RPHASE 0x0DB /* RO: RSLIP Phase Status */ 555 #define Bt8370_TPHASE 0x0DC /* RO: TSLIP Phase Status */ 556 #define Bt8370_PERR 0x0DD /* RO: RAM Parity Status */ 557 558 #define Bt8370_SBCn 0x0E0 /* RW: System Bus Per-Channel Ctl */ 559 #define Bt8370_TPCn 0x100 /* RW: Tx Per-Channel Control */ 560 #define Bt8370_TSIGn 0x120 /* RW: Tx Signalling Buffer */ 561 #define Bt8370_TSLIP_LOn 0x140 /* RW: Tx PCM Slip Buffer Lo */ 562 #define Bt8370_TSLIP_HIn 0x160 /* RW: Tx PCM Slip Buffer Hi */ 563 #define Bt8370_RPCn 0x180 /* RW: Rx Per-Channel Control */ 564 #define Bt8370_RSIGn 0x1A0 /* RW: Rx Signalling Buffer */ 565 #define Bt8370_RSLIP_LOn 0x1C0 /* RW: Rx PCM Slip Buffer Lo */ 566 #define Bt8370_RSLIP_HIn 0x1E0 /* RW: Rx PCM Slip Buffer Hi */ 567 568 /* Bt8370_LOOP (0x14) framer loopback control register bits */ 569 #define LOOP_ANALOG 0x01 /* inward loop thru LIU */ 570 #define LOOP_FRAMER 0x02 /* inward loop thru framer */ 571 #define LOOP_LINE 0x04 /* outward loop thru LIU */ 572 #define LOOP_PAYLOAD 0x08 /* outward loop of payload */ 573 #define LOOP_DUAL 0x06 /* inward framer + outward line */ 574 575 /* Bt8370_ALM1 (0x47) receiver alarm status register bits */ 576 #define ALM1_SIGFRZ 0x01 /* Rx Signalling Freeze */ 577 #define ALM1_RLOF 0x02 /* Rx loss of frame alignment */ 578 #define ALM1_RLOS 0x04 /* Rx digital loss of signal */ 579 #define ALM1_RALOS 0x08 /* Rx analog loss of signal */ 580 #define ALM1_RAIS 0x10 /* Rx Alarm Indication Signal */ 581 #define ALM1_RYEL 0x40 /* Rx Yellow alarm indication */ 582 #define ALM1_RMYEL 0x80 /* Rx multiframe YELLOW alarm */ 583 584 /* Bt8370_ALM3 (0x49) receive framer status register bits */ 585 #define ALM3_FRED 0x04 /* Rx Out Of T1/FAS alignment */ 586 #define ALM3_MRED 0x08 /* Rx Out Of MFAS alignment */ 587 #define ALM3_SRED 0x10 /* Rx Out Of CAS alignment */ 588 #define ALM3_SEF 0x20 /* Rx Severely Errored Frame */ 589 #define ALM3_RMAIS 0x40 /* Rx TS16 AIS (CAS) */ 590 591 /* Bt8370_TALM (0x75) transmit alarm control register bits */ 592 #define TALM_TAIS 0x01 /* Tx Alarm Indication Signal */ 593 #define TALM_TYEL 0x02 /* Tx Yellow alarm */ 594 #define TALM_TMYEL 0x04 /* Tx Multiframe Yellow alarm */ 595 #define TALM_AUTO_AIS 0x08 /* auto send AIS on LOS */ 596 #define TALM_AUTO_YEL 0x10 /* auto send YEL on LOF */ 597 #define TALM_AUTO_MYEL 0x20 /* auto send E1-Y16 on loss-of-CAS */ 598 599 /* 8370 BOP (Bit Oriented Protocol) command fragments */ 600 #define RBOP_OFF 0x00 /* BOP Rx disabled */ 601 #define RBOP_25 0xE0 /* BOP Rx requires 25 BOPs */ 602 #define TBOP_OFF 0x00 /* BOP Tx disabled */ 603 #define TBOP_25 0x0B /* BOP Tx sends 25 BOPs */ 604 #define TBOP_CONT 0x0F /* BOP Tx sends continuously */ 605 606 /* T1.403 Bit-Oriented ESF Data-Link Message codes */ 607 #define T1BOP_OOF 0x00 /* Yellow alarm status */ 608 #define T1BOP_LINE_UP 0x07 /* line loopback activate */ 609 #define T1BOP_LINE_DOWN 0x1C /* line loopback deactivate */ 610 #define T1BOP_PAY_UP 0x0A /* payload loopback activate */ 611 #define T1BOP_PAY_DOWN 0x19 /* payload loopback deactivate */ 612 #define T1BOP_NET_UP 0x09 /* network loopback activate */ 613 #define T1BOP_NET_DOWN 0x12 /* network loopback deactivate */ 614 615 /* Unix & Linux reserve 16 device-private IOCTLs */ 616 #if BSD 617 # define LMCIOCGSTAT _IOWR('i', 240, struct status) 618 # define LMCIOCGCFG _IOWR('i', 241, struct config) 619 # define LMCIOCSCFG _IOW('i', 242, struct config) 620 # define LMCIOCREAD _IOWR('i', 243, struct ioctl) 621 # define LMCIOCWRITE _IOW('i', 244, struct ioctl) 622 # define LMCIOCTL _IOWR('i', 245, struct ioctl) 623 #endif 624 625 struct iohdr /* all LMCIOCs begin with this */ 626 { 627 char ifname[IFNAMSIZ]; /* interface name, e.g. "lmc0" */ 628 u_int32_t cookie; /* interface version number */ 629 u_int16_t direction; /* missing in Linux IOCTL */ 630 u_int16_t length; /* missing in Linux IOCTL */ 631 struct iohdr *iohdr; /* missing in Linux IOCTL */ 632 u_int32_t spare; /* pad this struct to **32 bytes** */ 633 }; 634 635 #define DIR_IO 0 636 #define DIR_IOW 1 /* copy data user->kernel */ 637 #define DIR_IOR 2 /* copy data kernel->user */ 638 #define DIR_IOWR 3 /* copy data kernel<->user */ 639 640 struct hssi_snmp 641 { 642 u_int16_t sigs; /* MII16_HSSI & MII16_HSSI_MODEM */ 643 }; 644 645 struct ssi_snmp 646 { 647 u_int16_t sigs; /* MII16_SSI & MII16_SSI_MODEM */ 648 }; 649 650 struct t3_snmp 651 { 652 u_int16_t febe; /* 8 bits - Far End Block err cnt */ 653 u_int16_t lcv; /* 16 bits - BPV err cnt */ 654 u_int16_t pcv; /* 8 bits - P-bit err cnt */ 655 u_int16_t ccv; /* 8 bits - C-bit err cnt */ 656 u_int16_t line; /* line status bit vector */ 657 u_int16_t loop; /* loop status bit vector */ 658 }; 659 660 struct t1_snmp 661 { 662 u_int16_t prm[4]; /* T1.403 Performance Report Msg */ 663 u_int16_t febe; /* 10 bits - E1 FAR CRC err cnt */ 664 u_int16_t lcv; /* 16 bits - BPV + EXZ err cnt */ 665 u_int16_t fe; /* 12 bits - Ft/Fs/FPS/FAS err cnt */ 666 u_int16_t crc; /* 10 bits - CRC6/CRC4 err cnt */ 667 u_int16_t line; /* line status bit vector */ 668 u_int16_t loop; /* loop status bit vector */ 669 }; 670 671 /* SNMP trunk MIB Send codes */ 672 #define TSEND_NORMAL 1 /* Send data (normal or looped) */ 673 #define TSEND_LINE 2 /* Send 'line loopback activate' */ 674 #define TSEND_PAYLOAD 3 /* Send 'payload loop activate' */ 675 #define TSEND_RESET 4 /* Send 'loopback deactivate' */ 676 #define TSEND_QRS 5 /* Send Quasi Random Signal */ 677 678 /* ANSI T1.403 Performance Report Msg -- once a second from the far end */ 679 #define T1PRM_FE 0x8000 /* Frame Sync Bit Error Event >= 1 */ 680 #define T1PRM_SE 0x4000 /* Severely Err Framing Event >= 1 */ 681 #define T1PRM_LB 0x2000 /* Payload Loopback Activated */ 682 #define T1PRM_G1 0x1000 /* CRC Error Event = 1 */ 683 #define T1PRM_R 0x0800 /* Reserved */ 684 #define T1PRM_G2 0x0400 /* 1 < CRC Error Event <= 5 */ 685 #define T1PRM_SEQ 0x0300 /* modulo 4 counter */ 686 #define T1PRM_G3 0x0080 /* 5 < CRC Error Event <= 10 */ 687 #define T1PRM_LV 0x0040 /* Line Code Violation Event >= 1 */ 688 #define T1PRM_G4 0x0020 /* 10 < CRC Error Event <= 100 */ 689 #define T1PRM_U 0x0018 /* Under study for synchronization */ 690 #define T1PRM_G5 0x0004 /* 100 < CRC Error Event <= 319 */ 691 #define T1PRM_SL 0x0002 /* Slip Event >= 1 */ 692 #define T1PRM_G6 0x0001 /* CRC Error Event >= 320 */ 693 694 /* SNMP Line Status */ 695 #define TLINE_NORM 0x0001 /* no alarm present */ 696 #define TLINE_RX_RAI 0x0002 /* receiving RAI = Yellow alarm */ 697 #define TLINE_TX_RAI 0x0004 /* sending RAI = Yellow alarm */ 698 #define TLINE_RX_AIS 0x0008 /* receiving AIS = blue alarm */ 699 #define TLINE_TX_AIS 0x0010 /* sending AIS = blue alarm */ 700 #define TLINE_LOF 0x0020 /* near end LOF = red alarm */ 701 #define TLINE_LOS 0x0040 /* near end loss of Signal */ 702 #define TLINE_LOOP 0x0080 /* near end is looped */ 703 #define T1LINE_RX_TS16_AIS 0x0100 /* near end receiving TS16 AIS */ 704 #define T1LINE_RX_TS16_LOMF 0x0200 /* near end sending TS16 LOMF */ 705 #define T1LINE_TX_TS16_LOMF 0x0400 /* near end receiving TS16 LOMF */ 706 #define T1LINE_RX_TEST 0x0800 /* near end receiving QRS Signal */ 707 #define T1LINE_SEF 0x1000 /* near end severely errored frame */ 708 #define T3LINE_RX_IDLE 0x0100 /* near end receiving IDLE signal */ 709 #define T3LINE_SEF 0x0200 /* near end severely errored frame */ 710 711 /* SNMP Loopback Status */ 712 #define TLOOP_NONE 0x01 /* no loopback */ 713 #define TLOOP_NEAR_PAYLOAD 0x02 /* near end payload loopback */ 714 #define TLOOP_NEAR_LINE 0x04 /* near end line loopback */ 715 #define TLOOP_NEAR_OTHER 0x08 /* near end looped somehow */ 716 #define TLOOP_NEAR_INWARD 0x10 /* near end looped inward */ 717 #define TLOOP_FAR_PAYLOAD 0x20 /* far end payload loopback */ 718 #define TLOOP_FAR_LINE 0x40 /* far end line loopback */ 719 720 /* event counters record interesting statistics */ 721 struct event_cntrs 722 { 723 struct timeval reset_time; /* time when cntrs were reset */ 724 u_int64_t ibytes; /* Rx bytes with good status */ 725 u_int64_t obytes; /* Tx bytes */ 726 u_int64_t ipackets; /* Rx packets with good status */ 727 u_int64_t opackets; /* Tx packets */ 728 u_int32_t ierrors; /* Rx packets with bad status */ 729 u_int32_t oerrors; /* Tx packets with bad status */ 730 u_int32_t idiscards; /* Rx packets discarded */ 731 u_int32_t odiscards; /* Tx packets discarded */ 732 u_int32_t fifo_over; /* Rx fifo overruns */ 733 u_int32_t fifo_under; /* Tx fifo underruns */ 734 u_int32_t missed; /* Rx pkts missed: no DMA descs */ 735 u_int32_t overruns; /* Rx pkts missed: fifo overrun */ 736 u_int32_t fdl_pkts; /* Rx T1 Facility Data Link pkts */ 737 u_int32_t crc_errs; /* Rx T1 frame CRC errors */ 738 u_int32_t lcv_errs; /* Rx T1 T3 Line Coding Violation */ 739 u_int32_t frm_errs; /* Rx T1 T3 Frame bit errors */ 740 u_int32_t febe_errs; /* Rx T1 T3 Far End Bit Errors */ 741 u_int32_t par_errs; /* Rx T3 P-bit parity errors */ 742 u_int32_t cpar_errs; /* Rx T3 C-bit parity errors */ 743 u_int32_t mfrm_errs; /* Rx T3 Multi-frame bit errors */ 744 u_int32_t rxdma; /* Rx out of kernel buffers */ 745 u_int32_t txdma; /* Tx out of DMA desciptors */ 746 u_int32_t lck_watch; /* try_lock conflict in watchdog */ 747 u_int32_t lck_ioctl; /* try_lock conflict in ioctl */ 748 u_int32_t lck_intr; /* try_lock conflict in interrupt */ 749 }; 750 751 /* sc->status is the READ ONLY status of the card. */ 752 /* Accessed using socket IO control calls or netgraph control messages. */ 753 struct status 754 { 755 struct iohdr iohdr; /* common ioctl header */ 756 u_int32_t card_type; /* PCI device number */ 757 u_int16_t ieee[3]; /* IEEE MAC-addr from Tulip SROM */ 758 u_int16_t oper_status; /* actual state: up, down, test */ 759 u_int32_t tx_speed; /* measured TX bits/sec */ 760 u_int32_t cable_type; /* SSI only: cable type */ 761 u_int32_t line_pkg; /* actual line pkg in use */ 762 u_int32_t line_prot; /* actual line proto in use */ 763 u_int32_t ticks; /* incremented by watchdog @ 1 Hz */ 764 struct event_cntrs cntrs; /* event counters */ 765 union 766 { 767 struct hssi_snmp hssi; /* data for RFC-???? HSSI MIB */ 768 struct t3_snmp t3; /* data for RFC-2496 T3 MIB */ 769 struct ssi_snmp ssi; /* data for RFC-1659 RS232 MIB */ 770 struct t1_snmp t1; /* data for RFC-2495 T1 MIB */ 771 } snmp; 772 }; 773 774 /* line protocol package codes fnobl */ 775 #define PKG_RAWIP 1 /* driver yyyyy */ 776 #define PKG_SPPP 2 /* fbsd, nbsd, obsd yyynn */ 777 #define PKG_P2P 3 /* bsd/os nnnyn */ 778 #define PKG_NG 4 /* fbsd ynnnn */ 779 #define PKG_GEN_HDLC 5 /* linux nnnny */ 780 781 /* line protocol codes fnobl */ 782 #define PROT_PPP 1 /* Point-to-Point Protocol yyyyy */ 783 #define PROT_C_HDLC 2 /* Cisco HDLC Protocol yyyyy */ 784 #define PROT_FRM_RLY 3 /* Frame Relay Protocol ynnyy */ 785 #define PROT_X25 4 /* X.25/LAPB Protocol nnnny */ 786 #define PROT_ETH_HDLC 5 /* raw Ether pkts in HDLC nnnny */ 787 #define PROT_IP_HDLC 6 /* raw IP4/6 pkts in HDLC yyyyy */ 788 789 /* oper_status codes (same as SNMP status codes) */ 790 #define STATUS_UP 1 /* may/will tx/rx pkts */ 791 #define STATUS_DOWN 2 /* can't/won't tx/rx pkts */ 792 #define STATUS_TEST 3 /* currently not used */ 793 794 struct synth /* programmable oscillator params */ 795 { 796 unsigned n :7; /* numerator (3..127) */ 797 unsigned m :7; /* denominator (3..127) */ 798 unsigned v :1; /* mul by 1|8 */ 799 unsigned x :2; /* div by 1|2|4|8 */ 800 unsigned r :2; /* div by 1|2|4|8 */ 801 unsigned prescale :13; /* log(final divisor): 2, 4 or 9 */ 802 } __attribute__ ((packed)); 803 804 #define SYNTH_FREF 20e6 /* reference xtal = 20 MHz */ 805 #define SYNTH_FMIN 50e6 /* internal VCO min 50 MHz */ 806 #define SYNTH_FMAX 250e6 /* internal VCO max 250 MHz */ 807 808 /* sc->config is the READ/WRITE configuration of the card. */ 809 /* Accessed using socket IO control calls or netgraph control messages. */ 810 struct config 811 { 812 struct iohdr iohdr; /* common ioctl header */ 813 u_int32_t crc_len; /* ALL: CRC-16 or CRC-32 or none */ 814 u_int32_t loop_back; /* ALL: many kinds of loopbacks */ 815 u_int32_t tx_clk_src; /* T1, HSSI: ST, RT, int, ext */ 816 u_int32_t format; /* T3, T1: ckt framing format */ 817 u_int32_t time_slots; /* T1: 64Kb time slot config */ 818 u_int32_t cable_len; /* T3, T1: cable length in meters */ 819 u_int32_t scrambler; /* T3: payload scrambler config */ 820 u_int32_t dte_dce; /* SSI, HSSIc: drive TXCLK */ 821 struct synth synth; /* SSI, HSSIc: synth oscil params */ 822 u_int32_t rx_gain; /* T1: receiver gain limit 0-50 dB */ 823 u_int32_t tx_pulse; /* T1: transmitter pulse shape */ 824 u_int32_t tx_lbo; /* T1: transmitter atten 0-22.5 dB */ 825 u_int32_t debug; /* ALL: extra printout */ 826 u_int32_t line_pkg; /* ALL: use this line pkg */ 827 u_int32_t line_prot; /* SPPP: use this line proto */ 828 u_int32_t keep_alive; /* SPPP: use keep-alive packets */ 829 }; 830 831 #define CFG_CRC_0 0 /* no CRC */ 832 #define CFG_CRC_16 2 /* X^16+X^12+X^5+1 (default) */ 833 #define CFG_CRC_32 4 /* X^32+X^26+X^23+X^22+X^16+X^12+ */ 834 /* X^11+X^10+X^8+X^7+X^5+X^4+X^2+X+1 */ 835 #define CFG_LOOP_NONE 1 /* SNMP don't loop back anything */ 836 #define CFG_LOOP_PAYLOAD 2 /* SNMP loop outward thru framer */ 837 #define CFG_LOOP_LINE 3 /* SNMP loop outward thru LIU */ 838 #define CFG_LOOP_OTHER 4 /* SNMP loop inward thru LIU */ 839 #define CFG_LOOP_INWARD 5 /* SNMP loop inward thru framer */ 840 #define CFG_LOOP_DUAL 6 /* SNMP loop inward & outward */ 841 #define CFG_LOOP_TULIP 16 /* ALL: loop inward thru Tulip */ 842 #define CFG_LOOP_PINS 17 /* HSSIc, SSI: loop inward-pins */ 843 #define CFG_LOOP_LL 18 /* HSSI, SSI: assert LA/LL mdm pin */ 844 #define CFG_LOOP_RL 19 /* HSSI, SSI: assert LB/RL mdm pin */ 845 846 #define CFG_CLKMUX_ST 1 /* TX clk <- Send timing */ 847 #define CFG_CLKMUX_INT 2 /* TX clk <- internal source */ 848 #define CFG_CLKMUX_RT 3 /* TX clk <- Receive (loop) timing */ 849 #define CFG_CLKMUX_EXT 4 /* TX clk <- ext connector */ 850 851 /* values 0-31 are Bt8370 CR0 register values (LSB is zero if E1). */ 852 /* values 32-99 are reserved for other T1E1 formats, (even number if E1) */ 853 /* values 100 and up are used for T3 frame formats. */ 854 #define CFG_FORMAT_T1SF 9 /* T1-SF AMI */ 855 #define CFG_FORMAT_T1ESF 27 /* T1-ESF+CRC B8ZS X^6+X+1 */ 856 #define CFG_FORMAT_E1FAS 0 /* E1-FAS HDB3 TS0 */ 857 #define CFG_FORMAT_E1FASCRC 8 /* E1-FAS+CRC HDB3 TS0 X^4+X+1 */ 858 #define CFG_FORMAT_E1FASCAS 16 /* E1-FAS +CAS HDB3 TS0 & TS16 */ 859 #define CFG_FORMAT_E1FASCRCCAS 24 /* E1-FAS+CRC+CAS HDB3 TS0 & TS16 */ 860 #define CFG_FORMAT_E1NONE 32 /* E1-NO framing HDB3 */ 861 #define CFG_FORMAT_T3CPAR 100 /* T3-C-Bit par B3ZS */ 862 #define CFG_FORMAT_T3M13 101 /* T3-M13 format B3ZS */ 863 864 /* format aliases that improve code readability */ 865 #define FORMAT_T1ANY ((sc->config.format & 1)==1) 866 #define FORMAT_E1ANY ((sc->config.format & 1)==0) 867 #define FORMAT_E1CAS ((sc->config.format & 0x11)==0x10) 868 #define FORMAT_E1CRC ((sc->config.format & 0x09)==0x08) 869 #define FORMAT_E1NONE (sc->config.format == CFG_FORMAT_E1NONE) 870 #define FORMAT_T1ESF (sc->config.format == CFG_FORMAT_T1ESF) 871 #define FORMAT_T1SF (sc->config.format == CFG_FORMAT_T1SF) 872 #define FORMAT_T3CPAR (sc->config.format == CFG_FORMAT_T3CPAR) 873 874 #define CFG_SCRAM_OFF 1 /* DS3 payload scrambler off */ 875 #define CFG_SCRAM_DL_KEN 2 /* DS3 DigitalLink/Kentrox X^43+1 */ 876 #define CFG_SCRAM_LARS 3 /* DS3 Larscom X^20+X^17+1 w/28ZS */ 877 878 #define CFG_DTE 1 /* HSSIc, SSI: rcv TXCLK; rcv DCD */ 879 #define CFG_DCE 2 /* HSSIc, SSI: drv TXCLK; drv DCD */ 880 881 #define CFG_GAIN_SHORT 0x24 /* 0-20 dB of equalized gain */ 882 #define CFG_GAIN_MEDIUM 0x2C /* 0-30 dB of equalized gain */ 883 #define CFG_GAIN_LONG 0x34 /* 0-40 dB of equalized gain */ 884 #define CFG_GAIN_EXTEND 0x3F /* 0-64 dB of equalized gain */ 885 #define CFG_GAIN_AUTO 0xFF /* auto-set based on cable length */ 886 887 #define CFG_PULSE_T1DSX0 0 /* T1 DSX 0- 40 meters */ 888 #define CFG_PULSE_T1DSX1 2 /* T1 DSX 40- 80 meters */ 889 #define CFG_PULSE_T1DSX2 4 /* T1 DSX 80-120 meters */ 890 #define CFG_PULSE_T1DSX3 6 /* T1 DSX 120-160 meters */ 891 #define CFG_PULSE_T1DSX4 8 /* T1 DSX 160-200 meters */ 892 #define CFG_PULSE_E1COAX 10 /* E1 75 ohm coax pair */ 893 #define CFG_PULSE_E1TWIST 12 /* E1 120 ohm twisted pairs */ 894 #define CFG_PULSE_T1CSU 14 /* T1 CSU 200-2000 meters; set LBO */ 895 #define CFG_PULSE_AUTO 0xFF /* auto-set based on cable length */ 896 897 #define CFG_LBO_0DB 0 /* T1CSU LBO = 0.0 dB; FCC opt A */ 898 #define CFG_LBO_7DB 16 /* T1CSU LBO = 7.5 dB; FCC opt B */ 899 #define CFG_LBO_15DB 32 /* T1CSU LBO = 15.0 dB; FCC opt C */ 900 #define CFG_LBO_22DB 48 /* T1CSU LBO = 22.5 dB; final span */ 901 #define CFG_LBO_AUTO 0xFF /* auto-set based on cable length */ 902 903 struct ioctl 904 { 905 struct iohdr iohdr; /* common ioctl header */ 906 u_int32_t cmd; /* command */ 907 u_int32_t address; /* command address */ 908 u_int32_t data; /* command data */ 909 char *ucode; /* user-land address of ucode */ 910 }; 911 912 #define IOCTL_RW_PCI 1 /* RW: Tulip PCI config registers */ 913 #define IOCTL_RW_CSR 2 /* RW: Tulip Control & Status Regs */ 914 #define IOCTL_RW_SROM 3 /* RW: Tulip Serial Rom */ 915 #define IOCTL_RW_BIOS 4 /* RW: Tulip Boot rom */ 916 #define IOCTL_RW_MII 5 /* RW: MII registers */ 917 #define IOCTL_RW_FRAME 6 /* RW: Framer registers */ 918 #define IOCTL_WO_SYNTH 7 /* WO: Synthesized oscillator */ 919 #define IOCTL_WO_DAC 8 /* WO: Digital/Analog Converter */ 920 921 #define IOCTL_XILINX_RESET 16 /* reset Xilinx: all FFs set to 0 */ 922 #define IOCTL_XILINX_ROM 17 /* load Xilinx program from ROM */ 923 #define IOCTL_XILINX_FILE 18 /* load Xilinx program from file */ 924 925 #define IOCTL_SET_STATUS 50 /* set mdm ctrl bits (internal use)*/ 926 #define IOCTL_SNMP_SEND 51 /* trunk MIB send code */ 927 #define IOCTL_SNMP_LOOP 52 /* trunk MIB loop configuration */ 928 #define IOCTL_SNMP_SIGS 53 /* RS232-like modem control sigs */ 929 #define IOCTL_RESET_CNTRS 54 /* reset event counters */ 930 931 /* storage for these strings is allocated here! */ 932 static const char *ssi_cables[] = 933 { 934 "V.10/EIA423", 935 "V.11/EIA530A", 936 "RESERVED", 937 "X.21", 938 "V.35", 939 "V.36/EIA449", 940 "V.28/EIA232", 941 "NO CABLE", 942 NULL, 943 }; 944 945 /***************************************************************************/ 946 /* Declarations above here are shared with the user lmcconfig program. */ 947 /* Declarations below here are private to the kernel device driver. */ 948 /***************************************************************************/ 949 950 #if (_KERNEL || KERNEL || __KERNEL__) 951 952 #define SNDQ_MAXLEN 32 /* packets awaiting transmission */ 953 #define DESCS_PER_PKT 4 /* DMA descriptors per TX pkt */ 954 #define NUM_TX_DESCS (DESCS_PER_PKT * SNDQ_MAXLEN) 955 /* Increase DESCS_PER_PKT if status.cntrs.txdma increments. */ 956 957 /* A Tulip DMA descriptor can point to two chunks of memory. 958 * Each chunk has a max length of 2047 bytes (ask the VMS guys...). 959 * 2047 isn't a multiple of a cache line size (32 bytes typically). 960 * So back off to 2048-32 = 2016 bytes per chunk (2 chunks per descr). 961 */ 962 #define MAX_CHUNK_LEN 2016 963 #define MAX_DESC_LEN (2 * MAX_CHUNK_LEN) 964 965 /* Tulip DMA descriptor; THIS STRUCT MUST MATCH THE HARDWARE */ 966 struct dma_desc 967 { 968 u_int32_t status; /* hardware->to->software */ 969 #if (BYTE_ORDER == LITTLE_ENDIAN) /* left-to-right packing by compiler */ 970 unsigned length1:11; /* buffer1 length */ 971 unsigned length2:11; /* buffer2 length */ 972 unsigned control:10; /* software->to->hardware */ 973 #else /* right-to-left packing by compiler */ 974 unsigned control:10; /* software->to->hardware */ 975 unsigned length2:11; /* buffer2 length */ 976 unsigned length1:11; /* buffer1 length */ 977 #endif 978 u_int32_t address1; /* buffer1 bus address */ 979 u_int32_t address2; /* buffer2 bus address */ 980 bus_dmamap_t map; /* bus dmamap for this descriptor */ 981 # define TLP_BUS_DSL_VAL (sizeof(bus_dmamap_t) & TLP_BUS_DSL) 982 } __attribute__ ((packed)); 983 984 /* Tulip DMA descriptor status bits */ 985 #define TLP_DSTS_OWNER 0x80000000 986 #define TLP_DSTS_RX_DESC_ERR 0x00004000 987 #define TLP_DSTS_RX_FIRST_DESC 0x00000200 988 #define TLP_DSTS_RX_LAST_DESC 0x00000100 989 #define TLP_DSTS_RX_MII_ERR 0x00000008 990 #define TLP_DSTS_RX_DRIBBLE 0x00000004 991 #define TLP_DSTS_TX_UNDERRUN 0x00000002 992 #define TLP_DSTS_RX_OVERRUN 0x00000001 /* not documented in rev AF */ 993 #define TLP_DSTS_RX_BAD (TLP_DSTS_RX_MII_ERR | \ 994 TLP_DSTS_RX_DRIBBLE | \ 995 TLP_DSTS_RX_DESC_ERR | \ 996 TLP_DSTS_RX_OVERRUN) 997 998 /* Tulip DMA descriptor control bits */ 999 #define TLP_DCTL_TX_INTERRUPT 0x0200 1000 #define TLP_DCTL_TX_LAST_SEG 0x0100 1001 #define TLP_DCTL_TX_FIRST_SEG 0x0080 1002 #define TLP_DCTL_TX_NO_CRC 0x0010 1003 #define TLP_DCTL_END_RING 0x0008 1004 #define TLP_DCTL_TX_NO_PAD 0x0002 1005 1006 /* DMA descriptors are kept in a ring. 1007 * Ring is empty when (read == write). 1008 * Ring is full when (read == wrap(write+1)), 1009 * The ring also contains a tailq of data buffers. 1010 */ 1011 struct desc_ring 1012 { 1013 struct dma_desc *read; /* next descriptor to be read */ 1014 struct dma_desc *write; /* next descriptor to be written */ 1015 struct dma_desc *first; /* first descriptor in ring */ 1016 struct dma_desc *last; /* last descriptor in ring */ 1017 struct dma_desc *temp; /* temporary write pointer for tx */ 1018 u_int32_t dma_addr; /* bus address for desc array */ 1019 int size_descs; /* bus_dmamap_sync needs this */ 1020 int num_descs; /* used to set rx quota */ 1021 #if BSD 1022 struct mbuf *head; /* tail-queue of mbufs */ 1023 struct mbuf *tail; 1024 bus_dma_tag_t tag; /* bus_dma tag for desc array */ 1025 bus_dmamap_t map; /* bus_dma map for desc array */ 1026 bus_dma_segment_t segs[2]; /* bus_dmamap_load() or bus_dmamem_alloc() */ 1027 int nsegs; /* bus_dmamap_load() or bus_dmamem_alloc() */ 1028 #endif 1029 }; 1030 1031 /* break circular definition */ 1032 typedef struct softc softc_t; 1033 1034 /* card-dependent methods */ 1035 struct card 1036 { 1037 void (* config)(softc_t *); 1038 void (* ident)(softc_t *); 1039 int (* watchdog)(softc_t *); /* must not sleep */ 1040 int (* ioctl)(softc_t *, struct ioctl *); /* can sleep */ 1041 }; 1042 1043 /* flag bits in sc->flags */ 1044 #define FLAG_IFNET 0x00000002 /* IFNET is attached */ 1045 #define FLAG_NETDEV 0x00000004 /* NETDEV is registered */ 1046 #define FLAG_NETGRAPH 0x00000008 /* NETGRAPH is attached */ 1047 1048 /* Accessing Tulip CSRs: 1049 * There are two ways: IO instruction (default) and memory reference. 1050 * IO refs are used if IOREF_CSR is defined; otherwise memory refs are used. 1051 * MEMORY REFERENCES DO NOT WORK in BSD/OS: page faults happen. 1052 */ 1053 #define IOREF_CSR 1 /* access Tulip CSRs with IO cycles if 1 */ 1054 1055 #if defined(DEVICE_POLLING) 1056 # define DEV_POLL 1 1057 #else 1058 # define DEV_POLL 0 1059 #endif 1060 1061 #if defined(ALTQ) && ALTQ 1062 # define ALTQ_PRESENT 1 1063 #else 1064 # define ALTQ_PRESENT 0 1065 #endif 1066 1067 /* This is the instance data, or "software context" for the device driver. */ 1068 /* NetBSD, OpenBSD and BSD/OS want struct device first in the softc. */ 1069 /* FreeBSD wants struct ifnet first in the softc. */ 1070 struct softc 1071 { 1072 1073 1074 /* State for kernel-resident Line Protocols */ 1075 #if IFNET 1076 struct ifnet *ifp; 1077 struct ifmedia ifm; /* hooks for ifconfig(8) */ 1078 # if NSPPP 1079 struct sppp *sppp; 1080 # elif P2P 1081 struct p2pcom p2pcom; 1082 struct p2pcom *p2p; 1083 # endif 1084 #endif 1085 1086 1087 #if NETGRAPH 1088 node_p ng_node; /* pointer to our node struct */ 1089 hook_p ng_hook; /* non-zero means NETGRAPH owns device */ 1090 struct ifaltq ng_sndq; 1091 struct ifaltq ng_fastq; 1092 #endif 1093 1094 struct callout callout; /* watchdog needs this */ 1095 struct device *dev; /* base device pointer */ 1096 bus_space_tag_t csr_tag; /* bus_space needs this */ 1097 bus_space_handle_t csr_handle;/* bus_space_needs this */ 1098 void *irq_cookie; /* bus_teardown_intr needs this */ 1099 struct resource *irq_res; /* bus_release_resource needs this */ 1100 int irq_res_id; /* bus_release_resource needs this */ 1101 struct resource *csr_res; /* bus_release_resource needs this */ 1102 int csr_res_id; /* bus_release resource needs this */ 1103 int csr_res_type; /* bus_release resource needs this */ 1104 struct mbuf *tx_mbuf; /* hang mbuf here while building dma descs */ 1105 # ifdef DEVICE_POLLING 1106 int quota; /* used for incoming packet flow control */ 1107 # endif 1108 struct mtx top_mtx; /* lock card->watchdog vs core_ioctl */ 1109 struct mtx bottom_mtx; /* lock for buf queues & descriptor rings */ 1110 1111 1112 /* Top-half state used by all card types; lock with top_lock, */ 1113 const char *dev_desc; /* string describing type of board */ 1114 struct status status; /* driver status lmcconfig can read */ 1115 struct config config; /* driver config lmcconfig can read/write */ 1116 struct card *card; /* card methods: config, ioctl, watchdog */ 1117 u_int32_t gpio_dir; /* s/w copy of GPIO direction register */ 1118 u_int16_t led_state; /* last value written to mii16 */ 1119 u_int32_t flags; /* driver-global flags */ 1120 1121 /* Top-half state used by card-specific watchdogs; lock with top_lock. */ 1122 u_int32_t last_mii16; /* SSI, HSSI: MII reg 16 one second ago */ 1123 u_int32_t last_stat16; /* T3: framer reg 16 one second ago */ 1124 u_int32_t last_alm1; /* T1E1: framer reg 47 one second ago */ 1125 u_int32_t last_FEAC; /* last FEAC msg code received */ 1126 u_int32_t loop_timer; /* seconds until loopback expires */ 1127 1128 /* Bottom-half state used by the interrupt code; lock with bottom_lock. */ 1129 struct desc_ring txring; /* tx descriptor ring state */ 1130 struct desc_ring rxring; /* rx descriptor ring state */ 1131 }; /* end of softc */ 1132 1133 /* Hide the minor differences between OS versions */ 1134 1135 typedef void intr_return_t; 1136 # define READ_PCI_CFG(sc, addr) pci_read_config ((sc)->dev, addr, 4) 1137 # define WRITE_PCI_CFG(sc, addr, data) pci_write_config((sc)->dev, addr, data, 4) 1138 # define READ_CSR(csr) bus_space_read_4 (sc->csr_tag, sc->csr_handle, csr) 1139 # define WRITE_CSR(csr, val) bus_space_write_4(sc->csr_tag, sc->csr_handle, csr, val) 1140 # define NAME_UNIT device_get_nameunit(sc->dev) 1141 # define DRIVER_DEBUG ((sc->config.debug) || (sc->ifp->if_flags & IFF_DEBUG)) 1142 # define TOP_TRYLOCK mtx_trylock(&sc->top_mtx) 1143 # define TOP_UNLOCK mtx_unlock (&sc->top_mtx) 1144 # define BOTTOM_TRYLOCK mtx_trylock(&sc->bottom_mtx) 1145 # define BOTTOM_UNLOCK mtx_unlock (&sc->bottom_mtx) 1146 # define CHECK_CAP priv_check(curthread, PRIV_DRIVER) 1147 # define DISABLE_INTR /* nothing */ 1148 # define ENABLE_INTR /* nothing */ 1149 # define IRQ_NONE /* nothing */ 1150 # define IRQ_HANDLED /* nothing */ 1151 # define IFP2SC(ifp) (ifp)->if_softc 1152 # define COPY_BREAK MHLEN 1153 # define SLEEP(usecs) tsleep(sc, PCATCH | PZERO, DEVICE_NAME, 1+(usecs/tick)) 1154 # define DMA_SYNC(map, size, flags) bus_dmamap_sync(ring->tag, map, flags) 1155 # define DMA_LOAD(map, addr, size) bus_dmamap_load(ring->tag, map, addr, size, fbsd_dmamap_load, ring, 0) 1156 # if (NBPFILTER != 0) 1157 # define LMC_BPF_MTAP(mbuf) BPF_MTAP(sc->ifp, mbuf) 1158 # define LMC_BPF_ATTACH(dlt, len) bpfattach(sc->ifp, dlt, len) 1159 # define LMC_BPF_DETACH bpfdetach(sc->ifp) 1160 # endif 1161 # define IF_DROP(ifq) _IF_DROP(ifq) 1162 # define IF_QFULL(ifq) _IF_QFULL(ifq) 1163 # define IFF_RUNNING IFF_DRV_RUNNING 1164 1165 1166 #if (NBPFILTER == 0) 1167 # define LMC_BPF_MTAP(mbuf) /* nothing */ 1168 # define LMC_BPF_ATTACH(dlt, len) /* nothing */ 1169 # define LMC_BPF_DETACH /* nothing */ 1170 #endif 1171 1172 #define HSSI_DESC "SBE/LMC HSSI Card" 1173 #define T3_DESC "SBE/LMC T3 Card" 1174 #define SSI_DESC "SBE/LMC SSI Card" 1175 #define T1E1_DESC "SBE/LMC T1E1 Card" 1176 1177 /* procedure prototypes */ 1178 1179 static void shift_srom_bits(softc_t *, u_int32_t, u_int32_t); 1180 static u_int16_t read_srom(softc_t *, u_int8_t); 1181 static void write_srom(softc_t *, u_int8_t, u_int16_t); 1182 1183 static u_int8_t read_bios(softc_t *, u_int32_t); 1184 static void write_bios_phys(softc_t *, u_int32_t, u_int8_t); 1185 static void write_bios(softc_t *, u_int32_t, u_int8_t); 1186 static void erase_bios(softc_t *); 1187 1188 static void shift_mii_bits(softc_t *, u_int32_t, u_int32_t); 1189 static u_int16_t read_mii(softc_t *, u_int8_t); 1190 static void write_mii(softc_t *, u_int8_t, u_int16_t); 1191 1192 static void set_mii16_bits(softc_t *, u_int16_t); 1193 static void clr_mii16_bits(softc_t *, u_int16_t); 1194 static void set_mii17_bits(softc_t *, u_int16_t); 1195 static void clr_mii17_bits(softc_t *, u_int16_t); 1196 1197 static void led_off(softc_t *, u_int16_t); 1198 static void led_on(softc_t *, u_int16_t); 1199 static void led_inv(softc_t *, u_int16_t); 1200 1201 static void write_framer(softc_t *, u_int16_t, u_int8_t); 1202 static u_int8_t read_framer(softc_t *, u_int16_t); 1203 1204 static void make_gpio_input(softc_t *, u_int32_t); 1205 static void make_gpio_output(softc_t *, u_int32_t); 1206 static u_int32_t read_gpio(softc_t *); 1207 static void set_gpio_bits(softc_t *, u_int32_t); 1208 static void clr_gpio_bits(softc_t *, u_int32_t); 1209 1210 static void reset_xilinx(softc_t *); 1211 static void load_xilinx_from_rom(softc_t *); 1212 static int load_xilinx_from_file(softc_t *, char *, u_int32_t); 1213 1214 static void shift_synth_bits(softc_t *, u_int32_t, u_int32_t); 1215 static void write_synth(softc_t *, struct synth *); 1216 1217 static void write_dac(softc_t *, u_int16_t); 1218 1219 static void hssi_config(softc_t *); 1220 static void hssi_ident(softc_t *); 1221 static int hssi_watchdog(softc_t *); 1222 static int hssi_ioctl(softc_t *, struct ioctl *); 1223 1224 static void t3_config(softc_t *); 1225 static void t3_ident(softc_t *); 1226 static int t3_watchdog(softc_t *); 1227 static void t3_send_dbl_feac(softc_t *, int, int); 1228 static int t3_ioctl(softc_t *, struct ioctl *); 1229 1230 static void ssi_config(softc_t *); 1231 static void ssi_ident(softc_t *); 1232 static int ssi_watchdog(softc_t *); 1233 static int ssi_ioctl(softc_t *, struct ioctl *); 1234 1235 static void t1_config(softc_t *); 1236 static void t1_ident(softc_t *); 1237 static int t1_watchdog(softc_t *); 1238 static void t1_send_bop(softc_t *, int); 1239 static int t1_ioctl(softc_t *, struct ioctl *); 1240 1241 #if IFNET 1242 static void lmc_raw_input(struct ifnet *, struct mbuf *); 1243 #endif /* IFNET */ 1244 1245 #if BSD 1246 static void mbuf_enqueue(struct desc_ring *, struct mbuf *); 1247 static struct mbuf* mbuf_dequeue(struct desc_ring *); 1248 static void fbsd_dmamap_load(void *, bus_dma_segment_t *, int, int); 1249 static int create_ring(softc_t *, struct desc_ring *, int); 1250 static void destroy_ring(softc_t *, struct desc_ring *); 1251 static int rxintr_cleanup(softc_t *); 1252 static int rxintr_setup(softc_t *); 1253 static int txintr_cleanup(softc_t *); 1254 static int txintr_setup_mbuf(softc_t *, struct mbuf *); 1255 static int txintr_setup(softc_t *); 1256 #endif /* BSD */ 1257 1258 1259 static void check_intr_status(softc_t *); 1260 static void core_interrupt(void *, int); 1261 static void user_interrupt(softc_t *, int); 1262 #if BSD 1263 # if (defined(__FreeBSD__) && defined(DEVICE_POLLING)) 1264 static int fbsd_poll(struct ifnet *, enum poll_cmd, int); 1265 # endif 1266 static intr_return_t bsd_interrupt(void *); 1267 #endif /* BSD */ 1268 1269 static void set_status(softc_t *, int); 1270 #if P2P 1271 static int p2p_getmdm(struct p2pcom *, caddr_t); 1272 static int p2p_mdmctl(struct p2pcom *, int); 1273 #endif 1274 #if NSPPP 1275 static void sppp_tls(struct sppp *); 1276 static void sppp_tlf(struct sppp *); 1277 #endif 1278 1279 static void config_proto(softc_t *, struct config *); 1280 static int core_ioctl(softc_t *, u_long, caddr_t); 1281 static void core_watchdog(softc_t *); 1282 1283 #if IFNET 1284 static int lmc_raw_ioctl(struct ifnet *, u_long, caddr_t); 1285 static int lmc_ifnet_ioctl(struct ifnet *, u_long, caddr_t); 1286 static void lmc_ifnet_start(struct ifnet *); 1287 static int lmc_raw_output(struct ifnet *, struct mbuf *, 1288 const struct sockaddr *, struct route *); 1289 static void setup_ifnet(struct ifnet *); 1290 static int lmc_ifnet_attach(softc_t *); 1291 static void lmc_ifnet_detach(softc_t *); 1292 #endif /* IFNET */ 1293 1294 #if NETGRAPH 1295 static int ng_constructor(node_p); 1296 static int ng_rcvmsg(node_p, item_p, hook_p); 1297 static int ng_shutdown(node_p); 1298 static int ng_newhook(node_p, hook_p, const char *); 1299 static int ng_connect(hook_p); 1300 static int ng_rcvdata(hook_p, item_p); 1301 static int ng_disconnect(hook_p); 1302 # if (IFNET == 0) 1303 static void ng_watchdog(void *); 1304 # endif 1305 static int ng_attach(softc_t *); 1306 static void ng_detach(softc_t *); 1307 #endif /* NETGRAPH */ 1308 1309 static int startup_card(softc_t *); 1310 static void shutdown_card(void *); 1311 static int attach_card(softc_t *, const char *); 1312 static void detach_card(softc_t *); 1313 1314 static int fbsd_probe(device_t); 1315 static int fbsd_detach(device_t); 1316 static int fbsd_shutdown(device_t); 1317 static int fbsd_attach(device_t); 1318 1319 1320 1321 1322 1323 #endif /* KERNEL */ 1324 1325 #endif /* IF_LMC_H */ 1326