1 /*
2  * Copyright (C) 2002-2003 by Ryan Beasley <ryanb@goddamnbastard.org>
3  *
4  * See the IPFILTER.LICENCE file for details on licencing.
5  */
6 /*
7  * Overview:
8  *   This is an in-kernel application proxy for Sun's RPCBIND (nee portmap)
9  *   protocol as defined in RFC1833.  It is far from complete, mostly
10  *   lacking in less-likely corner cases, but it's definitely functional.
11  *
12  *   Invocation:
13  *     rdr <int> <e_ip>/32 port <e_p> -> <i_ip> port <i_p> udp proxy rpcbu
14  *
15  *   If the host running IP Filter is the same as the RPC server, it's
16  *   perfectly legal for both the internal and external addresses and ports
17  *   to match.
18  *
19  *   When triggered by appropriate IP NAT rules, this proxy works by
20  *   examining data contained in received packets.  Requests and replies are
21  *   modified, NAT and state table entries created, etc., as necessary.
22  */
23 /*
24  * TODO / NOTES
25  *
26  *   o Must implement locking to protect proxy session data.
27  *   o Fragmentation isn't supported.
28  *   o Only supports UDP.
29  *   o Doesn't support multiple RPC records in a single request.
30  *   o Errors should be more fine-grained.  (e.g., malloc failure vs.
31  *     illegal RPCB request / reply)
32  *   o Even with the limit on the total amount of recorded transactions,
33  *     should there be a timeout on transaction removal?
34  *   o There is a potential collision between cloning, wildcard NAT and
35  *     state entries.  There should be an appr_getport routine for
36  *     to avoid this.
37  *   o The enclosed hack of STREAMS support is pretty sick and most likely
38  *     broken.
39  *
40  *	$Id: ip_rpcb_pxy.c,v 2.25.2.7 2007/06/04 09:16:31 darrenr Exp $
41  */
42 
43 #define	IPF_RPCB_PROXY
44 
45 /*
46  * Function prototypes
47  */
48 int	ippr_rpcb_init __P((void));
49 void	ippr_rpcb_fini __P((void));
50 int	ippr_rpcb_new __P((fr_info_t *, ap_session_t *, nat_t *));
51 void	ippr_rpcb_del __P((ap_session_t *));
52 int	ippr_rpcb_in __P((fr_info_t *, ap_session_t *, nat_t *));
53 int	ippr_rpcb_out __P((fr_info_t *, ap_session_t *, nat_t *));
54 
55 static void	ippr_rpcb_flush __P((rpcb_session_t *));
56 static int	ippr_rpcb_decodereq __P((fr_info_t *, nat_t *,
57 	rpcb_session_t *, rpc_msg_t *));
58 static int	ippr_rpcb_skipauth __P((rpc_msg_t *, xdr_auth_t *, u_32_t **));
59 static int	ippr_rpcb_insert __P((rpcb_session_t *, rpcb_xact_t *));
60 static int	ippr_rpcb_xdrrpcb __P((rpc_msg_t *, u_32_t *, rpcb_args_t *));
61 static int	ippr_rpcb_getuaddr __P((rpc_msg_t *, xdr_uaddr_t *,
62 	u_32_t **));
63 static u_int	ippr_rpcb_atoi __P((char *));
64 static int	ippr_rpcb_modreq __P((fr_info_t *, nat_t *, rpc_msg_t *,
65 	mb_t *, u_int));
66 static int	ippr_rpcb_decoderep __P((fr_info_t *, nat_t *,
67 	rpcb_session_t *, rpc_msg_t *, rpcb_xact_t **));
68 static rpcb_xact_t *	ippr_rpcb_lookup __P((rpcb_session_t *, u_32_t));
69 static void	ippr_rpcb_deref __P((rpcb_session_t *, rpcb_xact_t *));
70 static int	ippr_rpcb_getproto __P((rpc_msg_t *, xdr_proto_t *,
71 	u_32_t **));
72 static int	ippr_rpcb_getnat __P((fr_info_t *, nat_t *, u_int, u_int));
73 static int	ippr_rpcb_modv3 __P((fr_info_t *, nat_t *, rpc_msg_t *,
74 	mb_t *, u_int));
75 static int	ippr_rpcb_modv4 __P((fr_info_t *, nat_t *, rpc_msg_t *,
76 	mb_t *, u_int));
77 static void     ippr_rpcb_fixlen __P((fr_info_t *, int));
78 
79 /*
80  * Global variables
81  */
82 static	frentry_t	rpcbfr;	/* Skeleton rule for reference by entities
83 				   this proxy creates. */
84 static	int	rpcbcnt;	/* Upper bound of allocated RPCB sessions. */
85 				/* XXX rpcbcnt still requires locking. */
86 
87 int	rpcb_proxy_init = 0;
88 
89 
90 /*
91  * Since rpc_msg contains only pointers, one should use this macro as a
92  * handy way to get to the goods.  (In case you're wondering about the name,
93  * this started as BYTEREF -> BREF -> B.)
94  */
95 #define	B(r)	(u_32_t)ntohl(*(r))
96 
97 /*
98  * Public subroutines
99  */
100 
101 /* --------------------------------------------------------------------	*/
102 /* Function:	ippr_rpcb_init						*/
103 /* Returns:	int - 0 == success					*/
104 /* Parameters:	(void)							*/
105 /*									*/
106 /* Initialize the filter rule entry and session limiter.		*/
107 /* --------------------------------------------------------------------	*/
108 int
ippr_rpcb_init()109 ippr_rpcb_init()
110 {
111 	rpcbcnt = 0;
112 
113 	bzero((char *)&rpcbfr, sizeof(rpcbfr));
114 	rpcbfr.fr_ref = 1;
115 	rpcbfr.fr_flags = FR_PASS|FR_QUICK|FR_KEEPSTATE;
116 	MUTEX_INIT(&rpcbfr.fr_lock, "ipf Sun RPCB proxy rule lock");
117 	rpcb_proxy_init = 1;
118 
119 	return(0);
120 }
121 
122 /* --------------------------------------------------------------------	*/
123 /* Function:	ippr_rpcb_fini						*/
124 /* Returns:	void							*/
125 /* Parameters:	(void)							*/
126 /*									*/
127 /* Destroy rpcbfr's mutex to avoid a lock leak.				*/
128 /* --------------------------------------------------------------------	*/
129 void
ippr_rpcb_fini()130 ippr_rpcb_fini()
131 {
132 	if (rpcb_proxy_init == 1) {
133 		MUTEX_DESTROY(&rpcbfr.fr_lock);
134 		rpcb_proxy_init = 0;
135 	}
136 }
137 
138 /* --------------------------------------------------------------------	*/
139 /* Function:	ippr_rpcb_new						*/
140 /* Returns:	int - -1 == failure, 0 == success			*/
141 /* Parameters:	fin(I)	- pointer to packet information			*/
142 /*		aps(I)	- pointer to proxy session structure		*/
143 /*		nat(I)	- pointer to NAT session structure		*/
144 /*									*/
145 /* Allocate resources for per-session proxy structures.			*/
146 /* --------------------------------------------------------------------	*/
147 int
ippr_rpcb_new(fin,aps,nat)148 ippr_rpcb_new(fin, aps, nat)
149 	fr_info_t *fin;
150 	ap_session_t *aps;
151 	nat_t *nat;
152 {
153 	rpcb_session_t *rs;
154 
155 	fin = fin;	/* LINT */
156 	nat = nat;	/* LINT */
157 
158 	KMALLOC(rs, rpcb_session_t *);
159 	if (rs == NULL)
160 		return(-1);
161 
162 	bzero((char *)rs, sizeof(*rs));
163 	MUTEX_INIT(&rs->rs_rxlock, "ipf Sun RPCB proxy session lock");
164 
165 	aps->aps_data = rs;
166 
167 	return(0);
168 }
169 
170 /* --------------------------------------------------------------------	*/
171 /* Function:	ippr_rpcb_del						*/
172 /* Returns:	void							*/
173 /* Parameters:	aps(I)	- pointer to proxy session structure		*/
174 /*									*/
175 /* Free up a session's list of RPCB requests.				*/
176 /* --------------------------------------------------------------------	*/
177 void
ippr_rpcb_del(aps)178 ippr_rpcb_del(aps)
179 	ap_session_t *aps;
180 {
181 	rpcb_session_t *rs;
182 	rs = (rpcb_session_t *)aps->aps_data;
183 
184 	MUTEX_ENTER(&rs->rs_rxlock);
185 	ippr_rpcb_flush(rs);
186 	MUTEX_EXIT(&rs->rs_rxlock);
187 	MUTEX_DESTROY(&rs->rs_rxlock);
188 }
189 
190 /* --------------------------------------------------------------------	*/
191 /* Function:	ippr_rpcb_in						*/
192 /* Returns:	int - APR_ERR(1) == drop the packet, 			*/
193 /*		      APR_ERR(2) == kill the proxy session,		*/
194 /*		      else change in packet length (in bytes)		*/
195 /* Parameters:	fin(I)	- pointer to packet information			*/
196 /*		ip(I)	- pointer to packet header			*/
197 /*		aps(I)	- pointer to proxy session structure		*/
198 /*		nat(I)	- pointer to NAT session structure		*/
199 /*									*/
200 /* Given a presumed RPCB request, perform some minor tests and pass off */
201 /* for decoding.  Also pass packet off for a rewrite if necessary.	*/
202 /* --------------------------------------------------------------------	*/
203 int
ippr_rpcb_in(fin,aps,nat)204 ippr_rpcb_in(fin, aps, nat)
205 	fr_info_t *fin;
206 	ap_session_t *aps;
207 	nat_t *nat;
208 {
209 	rpc_msg_t rpcmsg, *rm;
210 	rpcb_session_t *rs;
211 	u_int off, dlen;
212 	mb_t *m;
213 	int rv;
214 
215 	/* Disallow fragmented or illegally short packets. */
216 	if ((fin->fin_flx & (FI_FRAG|FI_SHORT)) != 0)
217 		return(APR_ERR(1));
218 
219 	/* Perform basic variable initialization. */
220 	rs = (rpcb_session_t *)aps->aps_data;
221 
222 	m = fin->fin_m;
223 	off = (char *)fin->fin_dp - (char *)fin->fin_ip;
224 	off += sizeof(udphdr_t) + fin->fin_ipoff;
225 	dlen = fin->fin_dlen - sizeof(udphdr_t);
226 
227 	/* Disallow packets outside legal range for supported requests. */
228 	if ((dlen < RPCB_REQMIN) || (dlen > RPCB_REQMAX))
229 		return(APR_ERR(1));
230 
231 	/* Copy packet over to convenience buffer. */
232 	rm = &rpcmsg;
233 	bzero((char *)rm, sizeof(*rm));
234 	COPYDATA(m, off, dlen, (caddr_t)&rm->rm_msgbuf);
235 	rm->rm_buflen = dlen;
236 
237 	/* Send off to decode request. */
238 	rv = ippr_rpcb_decodereq(fin, nat, rs, rm);
239 
240 	switch(rv)
241 	{
242 	case -1:
243 		return(APR_ERR(1));
244 		/*NOTREACHED*/
245 		break;
246 	case 0:
247 		break;
248 	case 1:
249 		rv = ippr_rpcb_modreq(fin, nat, rm, m, off);
250 		break;
251 	default:
252 		/*CONSTANTCONDITION*/
253 		IPF_PANIC(1, ("illegal rv %d (ippr_rpcb_req)", rv));
254 	}
255 
256 	return(rv);
257 }
258 
259 /* --------------------------------------------------------------------	*/
260 /* Function:	ippr_rpcb_out						*/
261 /* Returns:	int - APR_ERR(1) == drop the packet, 			*/
262 /*		      APR_ERR(2) == kill the proxy session,		*/
263 /*		      else change in packet length (in bytes)		*/
264 /* Parameters:	fin(I)	- pointer to packet information			*/
265 /*		ip(I)	- pointer to packet header			*/
266 /*		aps(I)	- pointer to proxy session structure		*/
267 /*		nat(I)	- pointer to NAT session structure		*/
268 /*									*/
269 /* Given a presumed RPCB reply, perform some minor tests and pass off	*/
270 /* for decoding.  If the message indicates a successful request with	*/
271 /* valid addressing information, create NAT and state structures to	*/
272 /* allow direct communication between RPC client and server.		*/
273 /* --------------------------------------------------------------------	*/
274 int
ippr_rpcb_out(fin,aps,nat)275 ippr_rpcb_out(fin, aps, nat)
276 	fr_info_t *fin;
277 	ap_session_t *aps;
278 	nat_t *nat;
279 {
280 	rpc_msg_t rpcmsg, *rm;
281 	rpcb_session_t *rs;
282 	rpcb_xact_t *rx;
283 	u_int off, dlen;
284 	int rv, diff;
285 	mb_t *m;
286 
287 	/* Disallow fragmented or illegally short packets. */
288 	if ((fin->fin_flx & (FI_FRAG|FI_SHORT)) != 0)
289 		return(APR_ERR(1));
290 
291 	/* Perform basic variable initialization. */
292 	rs = (rpcb_session_t *)aps->aps_data;
293 	rx = NULL;
294 
295 	m = fin->fin_m;
296 	off = (char *)fin->fin_dp - (char *)fin->fin_ip;
297 	off += sizeof(udphdr_t) + fin->fin_ipoff;
298 	dlen = fin->fin_dlen - sizeof(udphdr_t);
299 	diff = 0;
300 
301 	/* Disallow packets outside legal range for supported requests. */
302 	if ((dlen < RPCB_REPMIN) || (dlen > RPCB_REPMAX))
303 		return(APR_ERR(1));
304 
305 	/* Copy packet over to convenience buffer. */
306 	rm = &rpcmsg;
307 	bzero((char *)rm, sizeof(*rm));
308 	COPYDATA(m, off, dlen, (caddr_t)&rm->rm_msgbuf);
309 	rm->rm_buflen = dlen;
310 
311 	rx = NULL;		/* XXX gcc */
312 
313 	/* Send off to decode reply. */
314 	rv = ippr_rpcb_decoderep(fin, nat, rs, rm, &rx);
315 
316 	switch(rv)
317 	{
318 	case -1: /* Bad packet */
319                 if (rx != NULL) {
320                         MUTEX_ENTER(&rs->rs_rxlock);
321                         ippr_rpcb_deref(rs, rx);
322                         MUTEX_EXIT(&rs->rs_rxlock);
323                 }
324 		return(APR_ERR(1));
325 		/*NOTREACHED*/
326 		break;
327 	case  0: /* Negative reply / request rejected */
328 		break;
329 	case  1: /* Positive reply */
330 		/*
331 		 * With the IP address embedded in a GETADDR(LIST) reply,
332 		 * we'll need to rewrite the packet in the very possible
333 		 * event that the internal & external addresses aren't the
334 		 * same.  (i.e., this box is either a router or rpcbind
335 		 * only listens on loopback.)
336 		 */
337 		if (nat->nat_inip.s_addr != nat->nat_outip.s_addr) {
338 			if (rx->rx_type == RPCB_RES_STRING)
339 				diff = ippr_rpcb_modv3(fin, nat, rm, m, off);
340 			else if (rx->rx_type == RPCB_RES_LIST)
341 				diff = ippr_rpcb_modv4(fin, nat, rm, m, off);
342 		}
343 		break;
344 	default:
345 		/*CONSTANTCONDITION*/
346 		IPF_PANIC(1, ("illegal rv %d (ippr_rpcb_decoderep)", rv));
347 	}
348 
349 	if (rx != NULL) {
350                 MUTEX_ENTER(&rs->rs_rxlock);
351                 /* XXX Gross hack - I'm overloading the reference
352                  * counter to deal with both threads and retransmitted
353                  * requests.  One deref signals that this thread is
354                  * finished with rx, and the other signals that we've
355                  * processed its reply.
356                  */
357                 ippr_rpcb_deref(rs, rx);
358                 ippr_rpcb_deref(rs, rx);
359                 MUTEX_EXIT(&rs->rs_rxlock);
360 	}
361 
362 	return(diff);
363 }
364 
365 /*
366  * Private support subroutines
367  */
368 
369 /* --------------------------------------------------------------------	*/
370 /* Function:	ippr_rpcb_flush						*/
371 /* Returns:	void							*/
372 /* Parameters:	rs(I)	- pointer to RPCB session structure		*/
373 /*									*/
374 /* Simply flushes the list of outstanding transactions, if any.		*/
375 /* --------------------------------------------------------------------	*/
376 static void
ippr_rpcb_flush(rs)377 ippr_rpcb_flush(rs)
378 	rpcb_session_t *rs;
379 {
380 	rpcb_xact_t *r1, *r2;
381 
382 	r1 = rs->rs_rxlist;
383 	if (r1 == NULL)
384 		return;
385 
386 	while (r1 != NULL) {
387 		r2 = r1;
388 		r1 = r1->rx_next;
389 		KFREE(r2);
390 	}
391 }
392 
393 /* --------------------------------------------------------------------	*/
394 /* Function:	ippr_rpcb_decodereq					*/
395 /* Returns:	int - -1 == bad request or critical failure,		*/
396 /*		       0 == request successfully decoded,		*/
397 /*		       1 == request successfully decoded; requires	*/
398 /*			    address rewrite/modification		*/
399 /* Parameters:	fin(I)	- pointer to packet information			*/
400 /*		nat(I)	- pointer to NAT session structure		*/
401 /*		rs(I)	- pointer to RPCB session structure		*/
402 /*		rm(I)	- pointer to RPC message structure		*/
403 /*									*/
404 /* Take a presumed RPCB request, decode it, and store the results in	*/
405 /* the transaction list.  If the internal target address needs to be	*/
406 /* modified, store its location in ptr.					*/
407 /* WARNING:  It's the responsibility of the caller to make sure there	*/
408 /* is enough room in rs_buf for the basic RPC message "preamble".	*/
409 /* --------------------------------------------------------------------	*/
410 static int
ippr_rpcb_decodereq(fin,nat,rs,rm)411 ippr_rpcb_decodereq(fin, nat, rs, rm)
412 	fr_info_t *fin;
413 	nat_t *nat;
414 	rpcb_session_t *rs;
415 	rpc_msg_t *rm;
416 {
417 	rpcb_args_t *ra;
418 	u_32_t xdr, *p;
419 	rpc_call_t *rc;
420 	rpcb_xact_t rx;
421 	int mod;
422 
423 	p = (u_32_t *)rm->rm_msgbuf;
424 	mod = 0;
425 
426 	bzero((char *)&rx, sizeof(rx));
427 	rc = &rm->rm_call;
428 
429 	rm->rm_xid = p;
430 	rx.rx_xid = B(p++);	/* Record this message's XID. */
431 
432 	/* Parse out and test the RPC header. */
433 	if ((B(p++) != RPCB_CALL) ||
434 	    (B(p++) != RPCB_MSG_VERSION) ||
435 	    (B(p++) != RPCB_PROG))
436 		return(-1);
437 
438 	/* Record the RPCB version and procedure. */
439 	rc->rc_vers = p++;
440 	rc->rc_proc = p++;
441 
442 	/* Bypass RPC authentication stuff. */
443 	if (ippr_rpcb_skipauth(rm, &rc->rc_authcred, &p) != 0)
444 		return(-1);
445 	if (ippr_rpcb_skipauth(rm, &rc->rc_authverf, &p) != 0)
446 		return(-1);
447 
448 	/* Compare RPCB version and procedure numbers. */
449 	switch(B(rc->rc_vers))
450 	{
451 	case 2:
452 		/* This proxy only supports PMAP_GETPORT. */
453 		if (B(rc->rc_proc) != RPCB_GETPORT)
454 			return(-1);
455 
456 		/* Portmap requests contain four 4 byte parameters. */
457 		if (RPCB_BUF_EQ(rm, p, 16) == 0)
458 			return(-1);
459 
460 		p += 2; /* Skip requested program and version numbers. */
461 
462 		/* Sanity check the requested protocol. */
463 		xdr = B(p);
464 		if (!(xdr == IPPROTO_UDP || xdr == IPPROTO_TCP))
465 			return(-1);
466 
467 		rx.rx_type = RPCB_RES_PMAP;
468 		rx.rx_proto = xdr;
469 		break;
470 	case 3:
471 	case 4:
472 		/* GETADDRLIST is exclusive to v4; GETADDR for v3 & v4 */
473 		switch(B(rc->rc_proc))
474 		{
475 		case RPCB_GETADDR:
476 			rx.rx_type = RPCB_RES_STRING;
477 			rx.rx_proto = (u_int)fin->fin_p;
478 			break;
479 		case RPCB_GETADDRLIST:
480 			if (B(rc->rc_vers) != 4)
481 				return(-1);
482 			rx.rx_type = RPCB_RES_LIST;
483 			break;
484 		default:
485 			return(-1);
486 		}
487 
488 		ra = &rc->rc_rpcbargs;
489 
490 		/* Decode the 'struct rpcb' request. */
491 		if (ippr_rpcb_xdrrpcb(rm, p, ra) != 0)
492 			return(-1);
493 
494 		/* Are the target address & port valid? */
495 		if ((ra->ra_maddr.xu_ip != nat->nat_outip.s_addr) ||
496 		    (ra->ra_maddr.xu_port != nat->nat_outport))
497 		    	return(-1);
498 
499 		/* Do we need to rewrite this packet? */
500 		if ((nat->nat_outip.s_addr != nat->nat_inip.s_addr) ||
501 		    (nat->nat_outport != nat->nat_inport))
502 		    	mod = 1;
503 		break;
504 	default:
505 		return(-1);
506 	}
507 
508         MUTEX_ENTER(&rs->rs_rxlock);
509 	if (ippr_rpcb_insert(rs, &rx) != 0) {
510                 MUTEX_EXIT(&rs->rs_rxlock);
511 		return(-1);
512 	}
513         MUTEX_EXIT(&rs->rs_rxlock);
514 
515 	return(mod);
516 }
517 
518 /* --------------------------------------------------------------------	*/
519 /* Function:	ippr_rpcb_skipauth					*/
520 /* Returns:	int -- -1 == illegal auth parameters (lengths)		*/
521 /*			0 == valid parameters, pointer advanced		*/
522 /* Parameters:	rm(I)	- pointer to RPC message structure		*/
523 /*		auth(I)	- pointer to RPC auth structure			*/
524 /*		buf(IO)	- pointer to location within convenience buffer	*/
525 /*									*/
526 /* Record auth data length & location of auth data, then advance past	*/
527 /* it.									*/
528 /* --------------------------------------------------------------------	*/
529 static int
ippr_rpcb_skipauth(rm,auth,buf)530 ippr_rpcb_skipauth(rm, auth, buf)
531 	rpc_msg_t *rm;
532 	xdr_auth_t *auth;
533 	u_32_t **buf;
534 {
535 	u_32_t *p, xdr;
536 
537 	p = *buf;
538 
539 	/* Make sure we have enough space for expected fixed auth parms. */
540 	if (RPCB_BUF_GEQ(rm, p, 8) == 0)
541 		return(-1);
542 
543 	p++; /* We don't care about auth_flavor. */
544 
545 	auth->xa_string.xs_len = p;
546 	xdr = B(p++);		/* Length of auth_data */
547 
548 	/* Test for absurdity / illegality of auth_data length. */
549 	if ((XDRALIGN(xdr) < xdr) || (RPCB_BUF_GEQ(rm, p, XDRALIGN(xdr)) == 0))
550 		return(-1);
551 
552 	auth->xa_string.xs_str = (char *)p;
553 
554 	p += XDRALIGN(xdr);	/* Advance our location. */
555 
556 	*buf = (u_32_t *)p;
557 
558 	return(0);
559 }
560 
561 /* --------------------------------------------------------------------	*/
562 /* Function:	ippr_rpcb_insert					*/
563 /* Returns:	int -- -1 == list insertion failed,			*/
564 /*			0 == item successfully added			*/
565 /* Parameters:	rs(I)	- pointer to RPCB session structure		*/
566 /*		rx(I)	- pointer to RPCB transaction structure		*/
567 /* --------------------------------------------------------------------	*/
568 static int
ippr_rpcb_insert(rs,rx)569 ippr_rpcb_insert(rs, rx)
570 	rpcb_session_t *rs;
571 	rpcb_xact_t *rx;
572 {
573 	rpcb_xact_t *rxp;
574 
575 	rxp = ippr_rpcb_lookup(rs, rx->rx_xid);
576 	if (rxp != NULL) {
577                 ++rxp->rx_ref;
578 		return(0);
579         }
580 
581 	if (rpcbcnt == RPCB_MAXREQS)
582 		return(-1);
583 
584 	KMALLOC(rxp, rpcb_xact_t *);
585 	if (rxp == NULL)
586 		return(-1);
587 
588 	bcopy((char *)rx, (char *)rxp, sizeof(*rx));
589 
590 	if (rs->rs_rxlist != NULL)
591 		rs->rs_rxlist->rx_pnext = &rxp->rx_next;
592 
593 	rxp->rx_pnext = &rs->rs_rxlist;
594 	rxp->rx_next = rs->rs_rxlist;
595 	rs->rs_rxlist = rxp;
596 
597 	rxp->rx_ref = 1;
598 
599 	++rpcbcnt;
600 
601 	return(0);
602 }
603 
604 /* --------------------------------------------------------------------	*/
605 /* Function:	ippr_rpcb_xdrrpcb					*/
606 /* Returns:	int -- -1 == failure to properly decode the request	*/
607 /*			0 == rpcb successfully decoded			*/
608 /* Parameters:	rs(I)	- pointer to RPCB session structure		*/
609 /*		p(I)	- pointer to location within session buffer	*/
610 /*		rpcb(O)	- pointer to rpcb (xdr type) structure		*/
611 /*									*/
612 /* Decode a XDR encoded rpcb structure and record its contents in rpcb  */
613 /* within only the context of TCP/UDP over IP networks.			*/
614 /* --------------------------------------------------------------------	*/
615 static int
ippr_rpcb_xdrrpcb(rm,p,ra)616 ippr_rpcb_xdrrpcb(rm, p, ra)
617 	rpc_msg_t *rm;
618 	u_32_t *p;
619 	rpcb_args_t *ra;
620 {
621 	if (!RPCB_BUF_GEQ(rm, p, 20))
622 		return(-1);
623 
624 	/* Bypass target program & version. */
625 	p += 2;
626 
627 	/* Decode r_netid.  Must be "tcp" or "udp". */
628 	if (ippr_rpcb_getproto(rm, &ra->ra_netid, &p) != 0)
629 		return(-1);
630 
631 	/* Decode r_maddr. */
632 	if (ippr_rpcb_getuaddr(rm, &ra->ra_maddr, &p) != 0)
633 		return(-1);
634 
635 	/* Advance to r_owner and make sure it's empty. */
636 	if (!RPCB_BUF_EQ(rm, p, 4) || (B(p) != 0))
637 		return(-1);
638 
639 	return(0);
640 }
641 
642 /* --------------------------------------------------------------------	*/
643 /* Function:	ippr_rpcb_getuaddr					*/
644 /* Returns:	int -- -1 == illegal string,				*/
645 /*			0 == string parsed; contents recorded		*/
646 /* Parameters:	rm(I)	- pointer to RPC message structure		*/
647 /*		xu(I)	- pointer to universal address structure	*/
648 /*		p(IO)	- pointer to location within message buffer	*/
649 /*									*/
650 /* Decode the IP address / port at p and record them in xu.		*/
651 /* --------------------------------------------------------------------	*/
652 static int
ippr_rpcb_getuaddr(rm,xu,p)653 ippr_rpcb_getuaddr(rm, xu, p)
654 	rpc_msg_t *rm;
655 	xdr_uaddr_t *xu;
656 	u_32_t **p;
657 {
658 	char *c, *i, *b, *pp;
659 	u_int d, dd, l, t;
660 	char uastr[24];
661 
662 	/* Test for string length. */
663 	if (!RPCB_BUF_GEQ(rm, *p, 4))
664 		return(-1);
665 
666 	xu->xu_xslen = (*p)++;
667 	xu->xu_xsstr = (char *)*p;
668 
669 	/* Length check */
670 	l = B(xu->xu_xslen);
671 	if (l < 11 || l > 23 || !RPCB_BUF_GEQ(rm, *p, XDRALIGN(l)))
672 		return(-1);
673 
674 	/* Advance p */
675 	*(char **)p += XDRALIGN(l);
676 
677 	/* Copy string to local buffer & terminate C style */
678 	bcopy(xu->xu_xsstr, uastr, l);
679 	uastr[l] = '\0';
680 
681 	i = (char *)&xu->xu_ip;
682 	pp = (char *)&xu->xu_port;
683 
684 	/*
685 	 * Expected format: a.b.c.d.e.f where [a-d] correspond to bytes of
686 	 * an IP address and [ef] are the bytes of a L4 port.
687 	 */
688 	if (!(ISDIGIT(uastr[0]) && ISDIGIT(uastr[l-1])))
689 		return(-1);
690 	b = uastr;
691 	for (c = &uastr[1], d = 0, dd = 0; c < &uastr[l-1]; c++) {
692 		if (ISDIGIT(*c)) {
693 			dd = 0;
694 			continue;
695 		}
696 		if (*c == '.') {
697 			if (dd != 0)
698 				return(-1);
699 
700 			/* Check for ASCII byte. */
701 			*c = '\0';
702 			t = ippr_rpcb_atoi(b);
703 			if (t > 255)
704 				return(-1);
705 
706 			/* Aim b at beginning of the next byte. */
707 			b = c + 1;
708 
709 			/* Switch off IP addr vs port parsing. */
710 			if (d < 4)
711 				i[d++] = t & 0xff;
712 			else
713 				pp[d++ - 4] = t & 0xff;
714 
715 			dd = 1;
716 			continue;
717 		}
718 		return(-1);
719 	}
720 	if (d != 5) /* String must contain exactly 5 periods. */
721 		return(-1);
722 
723 	/* Handle the last byte (port low byte) */
724 	t = ippr_rpcb_atoi(b);
725 	if (t > 255)
726 		return(-1);
727 	pp[d - 4] = t & 0xff;
728 
729 	return(0);
730 }
731 
732 /* --------------------------------------------------------------------	*/
733 /* Function:	ippr_rpcb_atoi (XXX should be generic for all proxies)	*/
734 /* Returns:	int -- integer representation of supplied string	*/
735 /* Parameters:	ptr(I)	- input string					*/
736 /*									*/
737 /* Simple version of atoi(3) ripped from ip_rcmd_pxy.c.			*/
738 /* --------------------------------------------------------------------	*/
739 static u_int
ippr_rpcb_atoi(ptr)740 ippr_rpcb_atoi(ptr)
741 	char *ptr;
742 {
743 	register char *s = ptr, c;
744 	register u_int i = 0;
745 
746 	while (((c = *s++) != '\0') && ISDIGIT(c)) {
747 		i *= 10;
748 		i += c - '0';
749 	}
750 	return i;
751 }
752 
753 /* --------------------------------------------------------------------	*/
754 /* Function:	ippr_rpcb_modreq					*/
755 /* Returns:	int -- change in datagram length			*/
756 /*			APR_ERR(2) - critical failure			*/
757 /* Parameters:	fin(I)	- pointer to packet information			*/
758 /*		nat(I)	- pointer to NAT session			*/
759 /*		rm(I)	- pointer to RPC message structure		*/
760 /*		m(I)	- pointer to mbuf chain				*/
761 /*		off(I)	- current offset within mbuf chain		*/
762 /*									*/
763 /* When external and internal addresses differ, we rewrite the former	*/
764 /* with the latter.  (This is exclusive to protocol versions 3 & 4).	*/
765 /* --------------------------------------------------------------------	*/
766 static int
ippr_rpcb_modreq(fin,nat,rm,m,off)767 ippr_rpcb_modreq(fin, nat, rm, m, off)
768 	fr_info_t *fin;
769 	nat_t *nat;
770 	rpc_msg_t *rm;
771 	mb_t *m;
772 	u_int off;
773 {
774 	u_int len, xlen, pos, bogo;
775 	rpcb_args_t *ra;
776 	char uaddr[24];
777 	udphdr_t *udp;
778 	char *i, *p;
779 	int diff;
780 
781 	ra = &rm->rm_call.rc_rpcbargs;
782 	i = (char *)&nat->nat_inip.s_addr;
783 	p = (char *)&nat->nat_inport;
784 
785 	/* Form new string. */
786 	bzero(uaddr, sizeof(uaddr)); /* Just in case we need padding. */
787 #if defined(SNPRINTF) && defined(_KERNEL)
788 	SNPRINTF(uaddr, sizeof(uaddr),
789 #else
790 	(void) sprintf(uaddr,
791 #endif
792 		       "%u.%u.%u.%u.%u.%u", i[0] & 0xff, i[1] & 0xff,
793 		       i[2] & 0xff, i[3] & 0xff, p[0] & 0xff, p[1] & 0xff);
794 	len = strlen(uaddr);
795 	xlen = XDRALIGN(len);
796 
797 	/* Determine mbuf offset to start writing to. */
798 	pos = (char *)ra->ra_maddr.xu_xslen - rm->rm_msgbuf;
799 	off += pos;
800 
801 	/* Write new string length. */
802 	bogo = htonl(len);
803 	COPYBACK(m, off, 4, (caddr_t)&bogo);
804 	off += 4;
805 
806 	/* Write new string. */
807 	COPYBACK(m, off, xlen, uaddr);
808 	off += xlen;
809 
810 	/* Write in zero r_owner. */
811 	bogo = 0;
812 	COPYBACK(m, off, 4, (caddr_t)&bogo);
813 
814 	/* Determine difference in data lengths. */
815 	diff = xlen - XDRALIGN(B(ra->ra_maddr.xu_xslen));
816 
817 	/*
818 	 * If our new string has a different length, make necessary
819 	 * adjustments.
820 	 */
821 	if (diff != 0) {
822 		udp = fin->fin_dp;
823 		udp->uh_ulen = htons(ntohs(udp->uh_ulen) + diff);
824 		fin->fin_ip->ip_len += diff;
825 		fin->fin_dlen += diff;
826 		fin->fin_plen += diff;
827 		/* XXX Storage lengths. */
828 	}
829 
830 	return(diff);
831 }
832 
833 /* --------------------------------------------------------------------	*/
834 /* Function:	ippr_rpcb_decoderep					*/
835 /* Returns:	int - -1 == bad request or critical failure,		*/
836 /*		       0 == valid, negative reply			*/
837 /*		       1 == vaddlid, positive reply; needs no changes	*/
838 /* Parameters:	fin(I)	- pointer to packet information			*/
839 /*		nat(I)	- pointer to NAT session structure		*/
840 /*		rs(I)	- pointer to RPCB session structure		*/
841 /*		rm(I)	- pointer to RPC message structure		*/
842 /*		rxp(O)	- pointer to RPCB transaction structure		*/
843 /*									*/
844 /* Take a presumed RPCB reply, extract the XID, search for the original */
845 /* request information, and determine whether the request was accepted	*/
846 /* or rejected.  With a valid accepted reply, go ahead and create NAT	*/
847 /* and state entries, and finish up by rewriting the packet as 		*/
848 /* required.								*/
849 /*									*/
850 /* WARNING:  It's the responsibility of the caller to make sure there	*/
851 /* is enough room in rs_buf for the basic RPC message "preamble".	*/
852 /* --------------------------------------------------------------------	*/
853 static int
ippr_rpcb_decoderep(fin,nat,rs,rm,rxp)854 ippr_rpcb_decoderep(fin, nat, rs, rm, rxp)
855 	fr_info_t *fin;
856 	nat_t *nat;
857 	rpcb_session_t *rs;
858 	rpc_msg_t *rm;
859 	rpcb_xact_t **rxp;
860 {
861 	rpcb_listp_t *rl;
862 	rpcb_entry_t *re;
863 	rpcb_xact_t *rx;
864 	u_32_t xdr, *p;
865 	rpc_resp_t *rr;
866 	int rv, cnt;
867 
868 	p = (u_32_t *)rm->rm_msgbuf;
869 
870 	bzero((char *)&rx, sizeof(rx));
871 	rr = &rm->rm_resp;
872 
873 	rm->rm_xid = p;
874 	xdr = B(p++);		/* Record this message's XID. */
875 
876 	/* Lookup XID */
877         MUTEX_ENTER(&rs->rs_rxlock);
878 	if ((rx = ippr_rpcb_lookup(rs, xdr)) == NULL) {
879                 MUTEX_EXIT(&rs->rs_rxlock);
880 		return(-1);
881         }
882         ++rx->rx_ref;        /* per thread reference */
883         MUTEX_EXIT(&rs->rs_rxlock);
884 
885 	*rxp = rx;
886 
887 	/* Test call vs reply */
888 	if (B(p++) != RPCB_REPLY)
889 		return(-1);
890 
891 	/* Test reply_stat */
892 	switch(B(p++))
893 	{
894 	case RPCB_MSG_DENIED:
895 		return(0);
896 	case RPCB_MSG_ACCEPTED:
897 		break;
898 	default:
899 		return(-1);
900 	}
901 
902 	/* Bypass RPC authentication stuff. */
903 	if (ippr_rpcb_skipauth(rm, &rr->rr_authverf, &p) != 0)
904 		return(-1);
905 
906 	/* Test accept status */
907 	if (!RPCB_BUF_GEQ(rm, p, 4))
908 		return(-1);
909 	if (B(p++) != 0)
910 		return(0);
911 
912 	/* Parse out the expected reply */
913 	switch(rx->rx_type)
914 	{
915 	case RPCB_RES_PMAP:
916 		/* There must be only one 4 byte argument. */
917 		if (!RPCB_BUF_EQ(rm, p, 4))
918 			return(-1);
919 
920 		rr->rr_v2 = p;
921 		xdr = B(rr->rr_v2);
922 
923 		/* Reply w/ a 0 port indicates service isn't registered */
924 		if (xdr == 0)
925 			return(0);
926 
927 		/* Is the value sane? */
928 		if (xdr > 65535)
929 			return(-1);
930 
931 		/* Create NAT & state table entries. */
932 		if (ippr_rpcb_getnat(fin, nat, rx->rx_proto, (u_int)xdr) != 0)
933 			return(-1);
934 		break;
935 	case RPCB_RES_STRING:
936 		/* Expecting a XDR string; need 4 bytes for length */
937 		if (!RPCB_BUF_GEQ(rm, p, 4))
938 			return(-1);
939 
940 		rr->rr_v3.xu_str.xs_len = p++;
941 		rr->rr_v3.xu_str.xs_str = (char *)p;
942 
943 		xdr = B(rr->rr_v3.xu_xslen);
944 
945 		/* A null string indicates an unregistered service */
946 		if ((xdr == 0) && RPCB_BUF_EQ(rm, p, 0))
947 			return(0);
948 
949 		/* Decode the target IP address / port. */
950 		if (ippr_rpcb_getuaddr(rm, &rr->rr_v3, &p) != 0)
951 			return(-1);
952 
953 		/* Validate the IP address and port contained. */
954 		if (nat->nat_inip.s_addr != rr->rr_v3.xu_ip)
955 			return(-1);
956 
957 		/* Create NAT & state table entries. */
958 		if (ippr_rpcb_getnat(fin, nat, rx->rx_proto,
959 				     (u_int)rr->rr_v3.xu_port) != 0)
960 			return(-1);
961 		break;
962 	case RPCB_RES_LIST:
963 		if (!RPCB_BUF_GEQ(rm, p, 4))
964 			return(-1);
965 		/* rpcb_entry_list_ptr */
966 		switch(B(p))
967 		{
968 		case 0:
969 			return(0);
970 			/*NOTREACHED*/
971 			break;
972 		case 1:
973 			break;
974 		default:
975 			return(-1);
976 		}
977 		rl = &rr->rr_v4;
978 		rl->rl_list = p++;
979 		cnt = 0;
980 
981 		for(;;) {
982 			re = &rl->rl_entries[rl->rl_cnt];
983 			if (ippr_rpcb_getuaddr(rm, &re->re_maddr, &p) != 0)
984 				return(-1);
985 			if (ippr_rpcb_getproto(rm, &re->re_netid, &p) != 0)
986 				return(-1);
987 			/* re_semantics & re_pfamily length */
988 			if (!RPCB_BUF_GEQ(rm, p, 12))
989 				return(-1);
990 			p++; /* Skipping re_semantics. */
991 			xdr = B(p++);
992 			if ((xdr != 4) || strncmp((char *)p, "inet", 4))
993 				return(-1);
994 			p++;
995 			if (ippr_rpcb_getproto(rm, &re->re_proto, &p) != 0)
996 				return(-1);
997 			if (!RPCB_BUF_GEQ(rm, p, 4))
998 				return(-1);
999 			re->re_more = p;
1000 			if (B(re->re_more) > 1) /* 0,1 only legal values */
1001 				return(-1);
1002 			++rl->rl_cnt;
1003 			++cnt;
1004 			if (B(re->re_more) == 0)
1005 				break;
1006 			/* Replies in  max out at 2; TCP and/or UDP */
1007 			if (cnt > 2)
1008 				return(-1);
1009 			p++;
1010 		}
1011 
1012 		for(rl->rl_cnt = 0; rl->rl_cnt < cnt; rl->rl_cnt++) {
1013 			re = &rl->rl_entries[rl->rl_cnt];
1014 			rv = ippr_rpcb_getnat(fin, nat,
1015 			                      re->re_proto.xp_proto,
1016 				              (u_int)re->re_maddr.xu_port);
1017 			if (rv != 0)
1018 				return(-1);
1019 		}
1020 		break;
1021 	default:
1022 		/*CONSTANTCONDITION*/
1023 		IPF_PANIC(1, ("illegal rx_type %d", rx->rx_type));
1024 	}
1025 
1026 	return(1);
1027 }
1028 
1029 /* --------------------------------------------------------------------	*/
1030 /* Function:	ippr_rpcb_lookup					*/
1031 /* Returns:	rpcb_xact_t * 	- NULL == no matching record,		*/
1032 /*				  else pointer to relevant entry	*/
1033 /* Parameters:	rs(I)	- pointer to RPCB session			*/
1034 /*		xid(I)	- XID to look for				*/
1035 /* --------------------------------------------------------------------	*/
1036 static rpcb_xact_t *
ippr_rpcb_lookup(rs,xid)1037 ippr_rpcb_lookup(rs, xid)
1038 	rpcb_session_t *rs;
1039 	u_32_t xid;
1040 {
1041 	rpcb_xact_t *rx;
1042 
1043 	if (rs->rs_rxlist == NULL)
1044 		return(NULL);
1045 
1046 	for (rx = rs->rs_rxlist; rx != NULL; rx = rx->rx_next)
1047 		if (rx->rx_xid == xid)
1048 			break;
1049 
1050 	return(rx);
1051 }
1052 
1053 /* --------------------------------------------------------------------	*/
1054 /* Function:	ippr_rpcb_deref					        */
1055 /* Returns:	(void)							*/
1056 /* Parameters:	rs(I)	- pointer to RPCB session			*/
1057 /*		rx(I)	- pointer to RPC transaction struct to remove	*/
1058 /*              force(I) - indicates to delete entry regardless of      */
1059 /*                         reference count                              */
1060 /* Locking:	rs->rs_rxlock must be held write only			*/
1061 /*									*/
1062 /* Free the RPCB transaction record rx from the chain of entries.	*/
1063 /* --------------------------------------------------------------------	*/
1064 static void
ippr_rpcb_deref(rs,rx)1065 ippr_rpcb_deref(rs, rx)
1066 	rpcb_session_t *rs;
1067 	rpcb_xact_t *rx;
1068 {
1069 	rs = rs;	/* LINT */
1070 
1071 	if (rx == NULL)
1072 		return;
1073 
1074 	if (--rx->rx_ref != 0)
1075 		return;
1076 
1077 	if (rx->rx_next != NULL)
1078 		rx->rx_next->rx_pnext = rx->rx_pnext;
1079 
1080 	*rx->rx_pnext = rx->rx_next;
1081 
1082 	KFREE(rx);
1083 
1084 	--rpcbcnt;
1085 }
1086 
1087 /* --------------------------------------------------------------------	*/
1088 /* Function:	ippr_rpcb_getproto					*/
1089 /* Returns:	int - -1 == illegal protocol/netid,			*/
1090 /*		       0 == legal protocol/netid			*/
1091 /* Parameters:	rm(I)	- pointer to RPC message structure		*/
1092 /*		xp(I)	- pointer to netid structure			*/
1093 /*		p(IO)	- pointer to location within packet buffer	*/
1094 /* 									*/
1095 /* Decode netid/proto stored at p and record its numeric value.	 	*/
1096 /* --------------------------------------------------------------------	*/
1097 static int
ippr_rpcb_getproto(rm,xp,p)1098 ippr_rpcb_getproto(rm, xp, p)
1099 	rpc_msg_t *rm;
1100 	xdr_proto_t *xp;
1101 	u_32_t **p;
1102 {
1103 	u_int len;
1104 
1105 	/* Must have 4 bytes for length & 4 bytes for "tcp" or "udp". */
1106 	if (!RPCB_BUF_GEQ(rm, p, 8))
1107 		return(-1);
1108 
1109 	xp->xp_xslen = (*p)++;
1110 	xp->xp_xsstr = (char *)*p;
1111 
1112 	/* Test the string length. */
1113 	len = B(xp->xp_xslen);
1114 	if (len != 3)
1115 	 	return(-1);
1116 
1117 	/* Test the actual string & record the protocol accordingly. */
1118 	if (!strncmp((char *)xp->xp_xsstr, "tcp\0", 4))
1119 		xp->xp_proto = IPPROTO_TCP;
1120 	else if (!strncmp((char *)xp->xp_xsstr, "udp\0", 4))
1121 		xp->xp_proto = IPPROTO_UDP;
1122 	else {
1123 		return(-1);
1124 	}
1125 
1126 	/* Advance past the string. */
1127 	(*p)++;
1128 
1129 	return(0);
1130 }
1131 
1132 /* --------------------------------------------------------------------	*/
1133 /* Function:	ippr_rpcb_getnat					*/
1134 /* Returns:	int -- -1 == failed to create table entries,		*/
1135 /*			0 == success					*/
1136 /* Parameters:	fin(I)	- pointer to packet information			*/
1137 /*		nat(I)	- pointer to NAT table entry			*/
1138 /*		proto(I) - transport protocol for new entries		*/
1139 /*		port(I)	- new port to use w/ wildcard table entries	*/
1140 /*									*/
1141 /* Create state and NAT entries to handle an anticipated connection	*/
1142 /* attempt between RPC client and server.				*/
1143 /* --------------------------------------------------------------------	*/
1144 static int
ippr_rpcb_getnat(fin,nat,proto,port)1145 ippr_rpcb_getnat(fin, nat, proto, port)
1146 	fr_info_t *fin;
1147 	nat_t *nat;
1148 	u_int proto;
1149 	u_int port;
1150 {
1151 	ipnat_t *ipn, ipnat;
1152 	tcphdr_t tcp;
1153 	ipstate_t *is;
1154 	fr_info_t fi;
1155 	nat_t *natl;
1156 	int nflags;
1157 
1158 	ipn = nat->nat_ptr;
1159 
1160 	/* Generate dummy fr_info */
1161 	bcopy((char *)fin, (char *)&fi, sizeof(fi));
1162 	fi.fin_state = NULL;
1163 	fi.fin_nat = NULL;
1164 	fi.fin_out = 0;
1165 	fi.fin_src = fin->fin_dst;
1166 	fi.fin_dst = nat->nat_outip;
1167 	fi.fin_p = proto;
1168 	fi.fin_sport = 0;
1169 	fi.fin_dport = port & 0xffff;
1170 	fi.fin_flx |= FI_IGNORE;
1171 
1172 	bzero((char *)&tcp, sizeof(tcp));
1173 	tcp.th_dport = htons(port);
1174 
1175 	if (proto == IPPROTO_TCP) {
1176 		tcp.th_win = htons(8192);
1177 		TCP_OFF_A(&tcp, sizeof(tcphdr_t) >> 2);
1178 		fi.fin_dlen = sizeof(tcphdr_t);
1179 		tcp.th_flags = TH_SYN;
1180 		nflags = NAT_TCP;
1181 	} else {
1182 		fi.fin_dlen = sizeof(udphdr_t);
1183 		nflags = NAT_UDP;
1184 	}
1185 
1186 	nflags |= SI_W_SPORT|NAT_SEARCH;
1187 	fi.fin_dp = &tcp;
1188 	fi.fin_plen = fi.fin_hlen + fi.fin_dlen;
1189 
1190 	/*
1191 	 * Search for existing NAT & state entries.  Pay close attention to
1192 	 * mutexes / locks grabbed from lookup routines, as not doing so could
1193 	 * lead to bad things.
1194 	 *
1195 	 * If successful, fr_stlookup returns with ipf_state locked.  We have
1196 	 * no use for this lock, so simply unlock it if necessary.
1197 	 */
1198 	is = fr_stlookup(&fi, &tcp, NULL);
1199 	if (is != NULL) {
1200 		RWLOCK_EXIT(&ipf_state);
1201 	}
1202 
1203 	RWLOCK_EXIT(&ipf_nat);
1204 
1205 	WRITE_ENTER(&ipf_nat);
1206 	natl = nat_inlookup(&fi, nflags, proto, fi.fin_src, fi.fin_dst);
1207 
1208 	if ((natl != NULL) && (is != NULL)) {
1209 		MUTEX_DOWNGRADE(&ipf_nat);
1210 		return(0);
1211 	}
1212 
1213 	/* Slightly modify the following structures for actual use in creating
1214 	 * NAT and/or state entries.  We're primarily concerned with stripping
1215 	 * flags that may be detrimental to the creation process or simply
1216 	 * shouldn't be associated with a table entry.
1217 	 */
1218 	fi.fin_fr = &rpcbfr;
1219 	fi.fin_flx &= ~FI_IGNORE;
1220 	nflags &= ~NAT_SEARCH;
1221 
1222 	if (natl == NULL) {
1223 		/* XXX Since we're just copying the original ipn contents
1224 		 * back, would we be better off just sending a pointer to
1225 		 * the 'temp' copy off to nat_new instead?
1226 		 */
1227 		/* Generate template/bogus NAT rule. */
1228 		bcopy((char *)ipn, (char *)&ipnat, sizeof(ipnat));
1229 		ipn->in_flags = nflags & IPN_TCPUDP;
1230 		ipn->in_apr = NULL;
1231 		ipn->in_p = proto;
1232 		ipn->in_pmin = htons(fi.fin_dport);
1233 		ipn->in_pmax = htons(fi.fin_dport);
1234 		ipn->in_pnext = htons(fi.fin_dport);
1235 		ipn->in_space = 1;
1236 		ipn->in_ippip = 1;
1237 		if (ipn->in_flags & IPN_FILTER) {
1238 			ipn->in_scmp = 0;
1239 			ipn->in_dcmp = 0;
1240 		}
1241 		*ipn->in_plabel = '\0';
1242 
1243 		/* Create NAT entry.  return NULL if this fails. */
1244 		natl = nat_new(&fi, ipn, NULL, nflags|SI_CLONE|NAT_SLAVE,
1245 			       NAT_INBOUND);
1246 
1247 		bcopy((char *)&ipnat, (char *)ipn, sizeof(ipnat));
1248 
1249 		if (natl == NULL) {
1250 			MUTEX_DOWNGRADE(&ipf_nat);
1251 			return(-1);
1252 		}
1253 
1254 		ipn->in_use++;
1255 		(void) nat_proto(&fi, natl, nflags);
1256 		nat_update(&fi, natl, natl->nat_ptr);
1257 	}
1258 	MUTEX_DOWNGRADE(&ipf_nat);
1259 
1260 	if (is == NULL) {
1261 		/* Create state entry.  Return NULL if this fails. */
1262 		fi.fin_dst = nat->nat_inip;
1263 		fi.fin_nat = (void *)natl;
1264 		fi.fin_flx |= FI_NATED;
1265 		fi.fin_flx &= ~FI_STATE;
1266 		nflags &= NAT_TCPUDP;
1267 		nflags |= SI_W_SPORT|SI_CLONE;
1268 
1269 		is = fr_addstate(&fi, NULL, nflags);
1270 		if (is == NULL) {
1271 			/*
1272 			 * XXX nat_delete is private to ip_nat.c.  Should
1273 			 * check w/ Darren about this one.
1274 			 *
1275 			 * nat_delete(natl, NL_EXPIRE);
1276 			 */
1277 			return(-1);
1278 		}
1279 		if (fi.fin_state != NULL)
1280 			fr_statederef((ipstate_t **)&fi.fin_state);
1281 	}
1282 
1283 	return(0);
1284 }
1285 
1286 /* --------------------------------------------------------------------	*/
1287 /* Function:	ippr_rpcb_modv3						*/
1288 /* Returns:	int -- change in packet length				*/
1289 /* Parameters:	fin(I)	- pointer to packet information			*/
1290 /*		nat(I)	- pointer to NAT session			*/
1291 /*		rm(I)	- pointer to RPC message structure		*/
1292 /*		m(I)	- pointer to mbuf chain				*/
1293 /*		off(I)	- offset within mbuf chain			*/
1294 /*									*/
1295 /* Write a new universal address string to this packet, adjusting	*/
1296 /* lengths as necessary.						*/
1297 /* --------------------------------------------------------------------	*/
1298 static int
ippr_rpcb_modv3(fin,nat,rm,m,off)1299 ippr_rpcb_modv3(fin, nat, rm, m, off)
1300 	fr_info_t *fin;
1301 	nat_t *nat;
1302 	rpc_msg_t *rm;
1303 	mb_t *m;
1304 	u_int off;
1305 {
1306 	u_int len, xlen, pos, bogo;
1307 	rpc_resp_t *rr;
1308 	char uaddr[24];
1309 	char *i, *p;
1310 	int diff;
1311 
1312 	rr = &rm->rm_resp;
1313 	i = (char *)&nat->nat_outip.s_addr;
1314 	p = (char *)&rr->rr_v3.xu_port;
1315 
1316 	/* Form new string. */
1317 	bzero(uaddr, sizeof(uaddr)); /* Just in case we need padding. */
1318 #if defined(SNPRINTF) && defined(_KERNEL)
1319 	SNPRINTF(uaddr, sizeof(uaddr),
1320 #else
1321 	(void) sprintf(uaddr,
1322 #endif
1323 		       "%u.%u.%u.%u.%u.%u", i[0] & 0xff, i[1] & 0xff,
1324 		       i[2] & 0xff, i[3] & 0xff, p[0] & 0xff, p[1] & 0xff);
1325 	len = strlen(uaddr);
1326 	xlen = XDRALIGN(len);
1327 
1328 	/* Determine mbuf offset to write to. */
1329 	pos = (char *)rr->rr_v3.xu_xslen - rm->rm_msgbuf;
1330 	off += pos;
1331 
1332 	/* Write new string length. */
1333 	bogo = htonl(len);
1334 	COPYBACK(m, off, 4, (caddr_t)&bogo);
1335 	off += 4;
1336 
1337 	/* Write new string. */
1338 	COPYBACK(m, off, xlen, uaddr);
1339 
1340 	/* Determine difference in data lengths. */
1341 	diff = xlen - XDRALIGN(B(rr->rr_v3.xu_xslen));
1342 
1343 	/*
1344 	 * If our new string has a different length, make necessary
1345 	 * adjustments.
1346 	 */
1347 	if (diff != 0)
1348 		ippr_rpcb_fixlen(fin, diff);
1349 
1350 	return(diff);
1351 }
1352 
1353 /* --------------------------------------------------------------------	*/
1354 /* Function:	ippr_rpcb_modv4						*/
1355 /* Returns:	int -- change in packet length				*/
1356 /* Parameters:	fin(I)	- pointer to packet information			*/
1357 /*		nat(I)	- pointer to NAT session			*/
1358 /*		rm(I)	- pointer to RPC message structure		*/
1359 /*		m(I)	- pointer to mbuf chain				*/
1360 /*		off(I)	- offset within mbuf chain			*/
1361 /*									*/
1362 /* Write new rpcb_entry list, adjusting	lengths as necessary.		*/
1363 /* --------------------------------------------------------------------	*/
1364 static int
ippr_rpcb_modv4(fin,nat,rm,m,off)1365 ippr_rpcb_modv4(fin, nat, rm, m, off)
1366 	fr_info_t *fin;
1367 	nat_t *nat;
1368 	rpc_msg_t *rm;
1369 	mb_t *m;
1370 	u_int off;
1371 {
1372 	u_int len, xlen, pos, bogo;
1373 	rpcb_listp_t *rl;
1374 	rpcb_entry_t *re;
1375 	rpc_resp_t *rr;
1376 	char uaddr[24];
1377 	int diff, cnt;
1378 	char *i, *p;
1379 
1380 	diff = 0;
1381 	rr = &rm->rm_resp;
1382 	rl = &rr->rr_v4;
1383 
1384 	i = (char *)&nat->nat_outip.s_addr;
1385 
1386 	/* Determine mbuf offset to write to. */
1387 	re = &rl->rl_entries[0];
1388 	pos = (char *)re->re_maddr.xu_xslen - rm->rm_msgbuf;
1389 	off += pos;
1390 
1391 	for (cnt = 0; cnt < rl->rl_cnt; cnt++) {
1392 		re = &rl->rl_entries[cnt];
1393 		p = (char *)&re->re_maddr.xu_port;
1394 
1395 		/* Form new string. */
1396 		bzero(uaddr, sizeof(uaddr)); /* Just in case we need
1397 						padding. */
1398 #if defined(SNPRINTF) && defined(_KERNEL)
1399 		SNPRINTF(uaddr, sizeof(uaddr),
1400 #else
1401 		(void) sprintf(uaddr,
1402 #endif
1403 			       "%u.%u.%u.%u.%u.%u", i[0] & 0xff,
1404 			       i[1] & 0xff, i[2] & 0xff, i[3] & 0xff,
1405 			       p[0] & 0xff, p[1] & 0xff);
1406 		len = strlen(uaddr);
1407 		xlen = XDRALIGN(len);
1408 
1409 		/* Write new string length. */
1410 		bogo = htonl(len);
1411 		COPYBACK(m, off, 4, (caddr_t)&bogo);
1412 		off += 4;
1413 
1414 		/* Write new string. */
1415 		COPYBACK(m, off, xlen, uaddr);
1416 		off += xlen;
1417 
1418 		/* Record any change in length. */
1419 		diff += xlen - XDRALIGN(B(re->re_maddr.xu_xslen));
1420 
1421 		/* If the length changed, copy back the rest of this entry. */
1422 		len = ((char *)re->re_more + 4) -
1423 		       (char *)re->re_netid.xp_xslen;
1424 		if (diff != 0) {
1425 			COPYBACK(m, off, len, (caddr_t)re->re_netid.xp_xslen);
1426 		}
1427 		off += len;
1428 	}
1429 
1430 	/*
1431 	 * If our new string has a different length, make necessary
1432 	 * adjustments.
1433 	 */
1434 	if (diff != 0)
1435 		ippr_rpcb_fixlen(fin, diff);
1436 
1437 	return(diff);
1438 }
1439 
1440 
1441 /* --------------------------------------------------------------------	*/
1442 /* Function:    ippr_rpcb_fixlen                                        */
1443 /* Returns:     (void)                                                  */
1444 /* Parameters:  fin(I)  - pointer to packet information                 */
1445 /*              len(I)  - change in packet length                       */
1446 /*                                                                      */
1447 /* Adjust various packet related lengths held in structure and packet   */
1448 /* header fields.                                                       */
1449 /* --------------------------------------------------------------------	*/
1450 static void
ippr_rpcb_fixlen(fin,len)1451 ippr_rpcb_fixlen(fin, len)
1452         fr_info_t *fin;
1453         int len;
1454 {
1455         udphdr_t *udp;
1456 
1457         udp = fin->fin_dp;
1458         udp->uh_ulen = htons(ntohs(udp->uh_ulen) + len);
1459         fin->fin_ip->ip_len += len;
1460         fin->fin_dlen += len;
1461         fin->fin_plen += len;
1462 }
1463 
1464 #undef B
1465