1 /*- 2 * Copyright (c) 2003 Silicon Graphics International Corp. 3 * Copyright (c) 2014-2015 Alexander Motin <mav@FreeBSD.org> 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification. 12 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 13 * substantially similar to the "NO WARRANTY" disclaimer below 14 * ("Disclaimer") and any redistribution must be conditioned upon 15 * including a substantially similar Disclaimer requirement for further 16 * binary redistribution. 17 * 18 * NO WARRANTY 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 22 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 23 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 27 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 28 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGES. 30 * 31 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_io.h#5 $ 32 * $FreeBSD$ 33 */ 34 /* 35 * CAM Target Layer data movement structures/interface. 36 * 37 * Author: Ken Merry <ken@FreeBSD.org> 38 */ 39 40 #ifndef _CTL_IO_H_ 41 #define _CTL_IO_H_ 42 43 #define CTL_MAX_CDBLEN 32 44 /* 45 * Uncomment this next line to enable printing out times for I/Os 46 * that take longer than CTL_TIME_IO_SECS seconds to get to the datamove 47 * and/or done stage. 48 */ 49 #define CTL_TIME_IO 50 #ifdef CTL_TIME_IO 51 #define CTL_TIME_IO_DEFAULT_SECS 90 52 #endif 53 54 /* 55 * Uncomment this next line to enable the CTL I/O delay feature. You 56 * can delay I/O at two different points -- datamove and done. This is 57 * useful for diagnosing abort conditions (for hosts that send an abort on a 58 * timeout), and for determining how long a host's timeout is. 59 */ 60 //#define CTL_IO_DELAY 61 62 typedef enum { 63 CTL_STATUS_NONE, /* No status */ 64 CTL_SUCCESS, /* Transaction completed successfully */ 65 CTL_CMD_TIMEOUT, /* Command timed out, shouldn't happen here */ 66 CTL_SEL_TIMEOUT, /* Selection timeout, shouldn't happen here */ 67 CTL_ERROR, /* General CTL error XXX expand on this? */ 68 CTL_SCSI_ERROR, /* SCSI error, look at status byte/sense data */ 69 CTL_CMD_ABORTED, /* Command aborted, don't return status */ 70 CTL_STATUS_MASK = 0xfff,/* Mask off any status flags */ 71 CTL_AUTOSENSE = 0x1000 /* Autosense performed */ 72 } ctl_io_status; 73 74 /* 75 * WARNING: Keep the data in/out/none flags where they are. They're used 76 * in conjunction with ctl_cmd_flags. See comment above ctl_cmd_flags 77 * definition in ctl_private.h. 78 */ 79 typedef enum { 80 CTL_FLAG_NONE = 0x00000000, /* no flags */ 81 CTL_FLAG_DATA_IN = 0x00000001, /* DATA IN */ 82 CTL_FLAG_DATA_OUT = 0x00000002, /* DATA OUT */ 83 CTL_FLAG_DATA_NONE = 0x00000003, /* no data */ 84 CTL_FLAG_DATA_MASK = 0x00000003, 85 CTL_FLAG_DO_AUTOSENSE = 0x00000020, /* grab sense info */ 86 CTL_FLAG_USER_REQ = 0x00000040, /* request came from userland */ 87 CTL_FLAG_ALLOCATED = 0x00000100, /* data space allocated */ 88 CTL_FLAG_ABORT_STATUS = 0x00000400, /* return TASK ABORTED status */ 89 CTL_FLAG_ABORT = 0x00000800, /* this I/O should be aborted */ 90 CTL_FLAG_DMA_INPROG = 0x00001000, /* DMA in progress */ 91 CTL_FLAG_DELAY_DONE = 0x00004000, /* delay injection done */ 92 CTL_FLAG_INT_COPY = 0x00008000, /* internal copy, no done call*/ 93 CTL_FLAG_SENT_2OTHER_SC = 0x00010000, 94 CTL_FLAG_FROM_OTHER_SC = 0x00020000, 95 CTL_FLAG_IS_WAS_ON_RTR = 0x00040000, /* Don't rerun cmd on failover*/ 96 CTL_FLAG_BUS_ADDR = 0x00080000, /* ctl_sglist contains BUS 97 addresses, not virtual ones*/ 98 CTL_FLAG_IO_CONT = 0x00100000, /* Continue I/O instead of 99 completing */ 100 #if 0 101 CTL_FLAG_ALREADY_DONE = 0x00200000 /* I/O already completed */ 102 #endif 103 CTL_FLAG_NO_DATAMOVE = 0x00400000, 104 CTL_FLAG_DMA_QUEUED = 0x00800000, /* DMA queued but not started*/ 105 CTL_FLAG_STATUS_QUEUED = 0x01000000, /* Status queued but not sent*/ 106 107 CTL_FLAG_FAILOVER = 0x04000000, /* Killed by a failover */ 108 CTL_FLAG_IO_ACTIVE = 0x08000000, /* I/O active on this SC */ 109 CTL_FLAG_STATUS_SENT = 0x10000000, /* Status sent by datamove */ 110 CTL_FLAG_SERSEQ_DONE = 0x20000000 /* All storage I/O started */ 111 } ctl_io_flags; 112 113 114 struct ctl_lba_len { 115 uint64_t lba; 116 uint32_t len; 117 }; 118 119 struct ctl_lba_len_flags { 120 uint64_t lba; 121 uint32_t len; 122 uint32_t flags; 123 #define CTL_LLF_FUA 0x04000000 124 #define CTL_LLF_DPO 0x08000000 125 #define CTL_LLF_READ 0x10000000 126 #define CTL_LLF_WRITE 0x20000000 127 #define CTL_LLF_VERIFY 0x40000000 128 #define CTL_LLF_COMPARE 0x80000000 129 }; 130 131 struct ctl_ptr_len_flags { 132 uint8_t *ptr; 133 uint32_t len; 134 uint32_t flags; 135 }; 136 137 union ctl_priv { 138 uint8_t bytes[sizeof(uint64_t) * 2]; 139 uint64_t integer; 140 uint64_t integers[2]; 141 void *ptr; 142 void *ptrs[2]; 143 }; 144 145 /* 146 * Number of CTL private areas. 147 */ 148 #define CTL_NUM_PRIV 6 149 150 /* 151 * Which private area are we using for a particular piece of data? 152 */ 153 #define CTL_PRIV_LUN 0 /* CTL LUN pointer goes here */ 154 #define CTL_PRIV_LBA_LEN 1 /* Decoded LBA/len for read/write*/ 155 #define CTL_PRIV_MODEPAGE 1 /* Modepage info for config write */ 156 #define CTL_PRIV_BACKEND 2 /* Reserved for block, RAIDCore */ 157 #define CTL_PRIV_BACKEND_LUN 3 /* Backend LUN pointer */ 158 #define CTL_PRIV_FRONTEND 4 /* Frontend storage */ 159 #define CTL_PRIV_FRONTEND2 5 /* Another frontend storage */ 160 161 #define CTL_LUN(io) ((io)->io_hdr.ctl_private[CTL_PRIV_LUN].ptrs[0]) 162 #define CTL_SOFTC(io) ((io)->io_hdr.ctl_private[CTL_PRIV_LUN].ptrs[1]) 163 #define CTL_BACKEND_LUN(io) ((io)->io_hdr.ctl_private[CTL_PRIV_BACKEND_LUN].ptrs[0]) 164 #define CTL_PORT(io) (((struct ctl_softc *)CTL_SOFTC(io))-> \ 165 ctl_ports[(io)->io_hdr.nexus.targ_port]) 166 167 /* 168 * These are used only on Originating SC in XFER mode, where requests don't 169 * ever reach backends, so we can reuse backend's private storage. 170 */ 171 #define CTL_RSGL(io) ((io)->io_hdr.ctl_private[CTL_PRIV_BACKEND].ptrs[0]) 172 #define CTL_LSGL(io) ((io)->io_hdr.ctl_private[CTL_PRIV_BACKEND].ptrs[1]) 173 #define CTL_RSGLT(io) ((struct ctl_sg_entry *)CTL_RSGL(io)) 174 #define CTL_LSGLT(io) ((struct ctl_sg_entry *)CTL_LSGL(io)) 175 176 #define CTL_INVALID_PORTNAME 0xFF 177 #define CTL_UNMAPPED_IID 0xFF 178 179 struct ctl_sg_entry { 180 void *addr; 181 size_t len; 182 }; 183 184 typedef enum { 185 CTL_IO_NONE, 186 CTL_IO_SCSI, 187 CTL_IO_TASK, 188 } ctl_io_type; 189 190 struct ctl_nexus { 191 uint32_t initid; /* Initiator ID */ 192 uint32_t targ_port; /* Target port, filled in by PORT */ 193 uint32_t targ_lun; /* Destination lun */ 194 uint32_t targ_mapped_lun; /* Destination lun CTL-wide */ 195 }; 196 197 typedef enum { 198 CTL_MSG_SERIALIZE, 199 CTL_MSG_R2R, 200 CTL_MSG_FINISH_IO, 201 CTL_MSG_BAD_JUJU, 202 CTL_MSG_MANAGE_TASKS, 203 CTL_MSG_PERS_ACTION, 204 CTL_MSG_DATAMOVE, 205 CTL_MSG_DATAMOVE_DONE, 206 CTL_MSG_UA, /* Set/clear UA on secondary. */ 207 CTL_MSG_PORT_SYNC, /* Information about port. */ 208 CTL_MSG_LUN_SYNC, /* Information about LUN. */ 209 CTL_MSG_IID_SYNC, /* Information about initiator. */ 210 CTL_MSG_LOGIN, /* Information about HA peer. */ 211 CTL_MSG_MODE_SYNC, /* Mode page current content. */ 212 CTL_MSG_FAILOVER /* Fake, never sent though the wire */ 213 } ctl_msg_type; 214 215 struct ctl_scsiio; 216 217 struct ctl_io_hdr { 218 uint32_t version; /* interface version XXX */ 219 ctl_io_type io_type; /* task I/O, SCSI I/O, etc. */ 220 ctl_msg_type msg_type; 221 struct ctl_nexus nexus; /* Initiator, port, target, lun */ 222 uint32_t iid_indx; /* the index into the iid mapping */ 223 uint32_t flags; /* transaction flags */ 224 uint32_t status; /* transaction status */ 225 uint32_t port_status; /* trans status, set by PORT, 0 = good*/ 226 uint32_t timeout; /* timeout in ms */ 227 uint32_t retries; /* retry count */ 228 #ifdef CTL_IO_DELAY 229 struct callout delay_callout; 230 #endif /* CTL_IO_DELAY */ 231 #ifdef CTL_TIME_IO 232 time_t start_time; /* I/O start time */ 233 struct bintime start_bt; /* Timer start ticks */ 234 struct bintime dma_start_bt; /* DMA start ticks */ 235 struct bintime dma_bt; /* DMA total ticks */ 236 #endif /* CTL_TIME_IO */ 237 uint32_t num_dmas; /* Number of DMAs */ 238 union ctl_io *remote_io; /* I/O counterpart on remote HA side */ 239 union ctl_io *blocker; /* I/O blocking this one */ 240 void *pool; /* I/O pool */ 241 union ctl_priv ctl_private[CTL_NUM_PRIV];/* CTL private area */ 242 TAILQ_HEAD(, ctl_io_hdr) blocked_queue; /* I/Os blocked by this one */ 243 STAILQ_ENTRY(ctl_io_hdr) links; /* linked list pointer */ 244 TAILQ_ENTRY(ctl_io_hdr) ooa_links; /* ooa_queue links */ 245 TAILQ_ENTRY(ctl_io_hdr) blocked_links; /* blocked_queue links */ 246 }; 247 248 typedef enum { 249 CTL_TAG_UNTAGGED, 250 CTL_TAG_SIMPLE, 251 CTL_TAG_ORDERED, 252 CTL_TAG_HEAD_OF_QUEUE, 253 CTL_TAG_ACA 254 } ctl_tag_type; 255 256 union ctl_io; 257 258 /* 259 * SCSI passthrough I/O structure for the CAM Target Layer. Note 260 * that some of these fields are here for completeness, but they aren't 261 * used in the CTL implementation. e.g., timeout and retries won't be 262 * used. 263 * 264 * Note: Make sure the io_hdr is *always* the first element in this 265 * structure. 266 */ 267 struct ctl_scsiio { 268 struct ctl_io_hdr io_hdr; /* common to all I/O types */ 269 270 /* 271 * The ext_* fields are generally intended for frontend use; CTL itself 272 * doesn't modify or use them. 273 */ 274 uint32_t ext_sg_entries; /* 0 = no S/G list, > 0 = num entries */ 275 uint8_t *ext_data_ptr; /* data buffer or S/G list */ 276 uint32_t ext_data_len; /* Data transfer length */ 277 uint32_t ext_data_filled; /* Amount of data filled so far */ 278 279 /* 280 * The number of scatter/gather entries in the list pointed to 281 * by kern_data_ptr. 0 means there is no list, just a data pointer. 282 */ 283 uint32_t kern_sg_entries; 284 285 uint32_t rem_sg_entries; /* Unused. */ 286 287 /* 288 * The data pointer or a pointer to the scatter/gather list. 289 */ 290 uint8_t *kern_data_ptr; 291 292 /* 293 * Length of the data buffer or scatter/gather list. It's also 294 * the length of this particular piece of the data transfer, 295 * ie. number of bytes expected to be transferred by the current 296 * invocation of frontend's datamove() callback. It's always 297 * less than or equal to kern_total_len. 298 */ 299 uint32_t kern_data_len; 300 301 /* 302 * Total length of data to be transferred during this particular 303 * SCSI command, as decoded from SCSI CDB. 304 */ 305 uint32_t kern_total_len; 306 307 /* 308 * Amount of data left after the current data transfer. 309 */ 310 uint32_t kern_data_resid; 311 312 /* 313 * Byte offset of this transfer, equal to the amount of data 314 * already transferred for this SCSI command during previous 315 * datamove() invocations. 316 */ 317 uint32_t kern_rel_offset; 318 319 struct scsi_sense_data sense_data; /* sense data */ 320 uint8_t sense_len; /* Returned sense length */ 321 uint8_t scsi_status; /* SCSI status byte */ 322 uint8_t sense_residual; /* Unused. */ 323 uint32_t residual; /* Unused */ 324 uint32_t tag_num; /* tag number */ 325 ctl_tag_type tag_type; /* simple, ordered, head of queue,etc.*/ 326 uint8_t cdb_len; /* CDB length */ 327 uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */ 328 int (*be_move_done)(union ctl_io *io); /* called by fe */ 329 int (*io_cont)(union ctl_io *io); /* to continue processing */ 330 }; 331 332 typedef enum { 333 CTL_TASK_ABORT_TASK, 334 CTL_TASK_ABORT_TASK_SET, 335 CTL_TASK_CLEAR_ACA, 336 CTL_TASK_CLEAR_TASK_SET, 337 CTL_TASK_I_T_NEXUS_RESET, 338 CTL_TASK_LUN_RESET, 339 CTL_TASK_TARGET_RESET, 340 CTL_TASK_BUS_RESET, 341 CTL_TASK_PORT_LOGIN, 342 CTL_TASK_PORT_LOGOUT, 343 CTL_TASK_QUERY_TASK, 344 CTL_TASK_QUERY_TASK_SET, 345 CTL_TASK_QUERY_ASYNC_EVENT 346 } ctl_task_type; 347 348 typedef enum { 349 CTL_TASK_FUNCTION_COMPLETE, 350 CTL_TASK_FUNCTION_SUCCEEDED, 351 CTL_TASK_FUNCTION_REJECTED, 352 CTL_TASK_LUN_DOES_NOT_EXIST, 353 CTL_TASK_FUNCTION_NOT_SUPPORTED 354 } ctl_task_status; 355 356 /* 357 * Task management I/O structure. Aborts, bus resets, etc., are sent using 358 * this structure. 359 * 360 * Note: Make sure the io_hdr is *always* the first element in this 361 * structure. 362 */ 363 struct ctl_taskio { 364 struct ctl_io_hdr io_hdr; /* common to all I/O types */ 365 ctl_task_type task_action; /* Target Reset, Abort, etc. */ 366 uint32_t tag_num; /* tag number */ 367 ctl_tag_type tag_type; /* simple, ordered, etc. */ 368 uint8_t task_status; /* Complete, Succeeded, etc. */ 369 uint8_t task_resp[3];/* Response information */ 370 }; 371 372 373 /* 374 * HA link messages. 375 */ 376 #define CTL_HA_VERSION 3 377 378 /* 379 * Used for CTL_MSG_LOGIN. 380 */ 381 struct ctl_ha_msg_login { 382 ctl_msg_type msg_type; 383 int version; 384 int ha_mode; 385 int ha_id; 386 int max_luns; 387 int max_ports; 388 int max_init_per_port; 389 }; 390 391 typedef enum { 392 CTL_PR_REG_KEY, 393 CTL_PR_UNREG_KEY, 394 CTL_PR_PREEMPT, 395 CTL_PR_CLEAR, 396 CTL_PR_RESERVE, 397 CTL_PR_RELEASE 398 } ctl_pr_action; 399 400 /* 401 * The PR info is specifically for sending Persistent Reserve actions 402 * to the other SC which it must also act on. 403 * 404 * Note: Make sure the io_hdr is *always* the first element in this 405 * structure. 406 */ 407 struct ctl_pr_info { 408 ctl_pr_action action; 409 uint8_t sa_res_key[8]; 410 uint8_t res_type; 411 uint32_t residx; 412 }; 413 414 struct ctl_ha_msg_hdr { 415 ctl_msg_type msg_type; 416 uint32_t status; /* transaction status */ 417 union ctl_io *original_sc; 418 union ctl_io *serializing_sc; 419 struct ctl_nexus nexus; /* Initiator, port, target, lun */ 420 }; 421 422 #define CTL_HA_MAX_SG_ENTRIES 16 423 #define CTL_HA_DATAMOVE_SEGMENT 131072 424 425 /* 426 * Used for CTL_MSG_PERS_ACTION. 427 */ 428 struct ctl_ha_msg_pr { 429 struct ctl_ha_msg_hdr hdr; 430 struct ctl_pr_info pr_info; 431 }; 432 433 /* 434 * Used for CTL_MSG_UA. 435 */ 436 struct ctl_ha_msg_ua { 437 struct ctl_ha_msg_hdr hdr; 438 int ua_all; 439 int ua_set; 440 int ua_type; 441 uint8_t ua_info[8]; 442 }; 443 444 /* 445 * The S/G handling here is a little different than the standard ctl_scsiio 446 * structure, because we can't pass data by reference in between controllers. 447 * The S/G list in the ctl_scsiio struct is normally passed in the 448 * kern_data_ptr field. So kern_sg_entries here will always be non-zero, 449 * even if there is only one entry. 450 * 451 * Used for CTL_MSG_DATAMOVE. 452 */ 453 struct ctl_ha_msg_dt { 454 struct ctl_ha_msg_hdr hdr; 455 ctl_io_flags flags; /* Only I/O flags are used here */ 456 uint32_t sg_sequence; /* S/G portion number */ 457 uint8_t sg_last; /* last S/G batch = 1 */ 458 uint32_t sent_sg_entries; /* previous S/G count */ 459 uint32_t cur_sg_entries; /* current S/G entries */ 460 uint32_t kern_sg_entries; /* total S/G entries */ 461 uint32_t kern_data_len; /* Length of this S/G list */ 462 uint32_t kern_total_len; /* Total length of this 463 transaction */ 464 uint32_t kern_data_resid; /* Length left to transfer 465 after this*/ 466 uint32_t kern_rel_offset; /* Byte Offset of this 467 transfer */ 468 struct ctl_sg_entry sg_list[CTL_HA_MAX_SG_ENTRIES]; 469 }; 470 471 /* 472 * Used for CTL_MSG_SERIALIZE, CTL_MSG_FINISH_IO, CTL_MSG_BAD_JUJU, 473 * and CTL_MSG_DATAMOVE_DONE. 474 */ 475 struct ctl_ha_msg_scsi { 476 struct ctl_ha_msg_hdr hdr; 477 uint32_t tag_num; /* tag number */ 478 ctl_tag_type tag_type; /* simple, ordered, etc. */ 479 uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */ 480 uint8_t cdb_len; /* CDB length */ 481 uint8_t scsi_status; /* SCSI status byte */ 482 uint8_t sense_len; /* Returned sense length */ 483 uint32_t port_status; /* trans status, set by FETD, 484 0 = good*/ 485 uint32_t kern_data_resid; /* for DATAMOVE_DONE */ 486 struct scsi_sense_data sense_data; /* sense data */ 487 }; 488 489 /* 490 * Used for CTL_MSG_MANAGE_TASKS. 491 */ 492 struct ctl_ha_msg_task { 493 struct ctl_ha_msg_hdr hdr; 494 ctl_task_type task_action; /* Target Reset, Abort, etc. */ 495 uint32_t tag_num; /* tag number */ 496 ctl_tag_type tag_type; /* simple, ordered, etc. */ 497 }; 498 499 /* 500 * Used for CTL_MSG_PORT_SYNC. 501 */ 502 struct ctl_ha_msg_port { 503 struct ctl_ha_msg_hdr hdr; 504 int port_type; 505 int physical_port; 506 int virtual_port; 507 int status; 508 int name_len; 509 int lun_map_len; 510 int port_devid_len; 511 int target_devid_len; 512 int init_devid_len; 513 uint8_t data[]; 514 }; 515 516 /* 517 * Used for CTL_MSG_LUN_SYNC. 518 */ 519 struct ctl_ha_msg_lun { 520 struct ctl_ha_msg_hdr hdr; 521 int flags; 522 unsigned int pr_generation; 523 uint32_t pr_res_idx; 524 uint8_t pr_res_type; 525 int lun_devid_len; 526 int pr_key_count; 527 uint8_t data[]; 528 }; 529 530 struct ctl_ha_msg_lun_pr_key { 531 uint32_t pr_iid; 532 uint64_t pr_key; 533 }; 534 535 /* 536 * Used for CTL_MSG_IID_SYNC. 537 */ 538 struct ctl_ha_msg_iid { 539 struct ctl_ha_msg_hdr hdr; 540 int in_use; 541 int name_len; 542 uint64_t wwpn; 543 uint8_t data[]; 544 }; 545 546 /* 547 * Used for CTL_MSG_MODE_SYNC. 548 */ 549 struct ctl_ha_msg_mode { 550 struct ctl_ha_msg_hdr hdr; 551 uint8_t page_code; 552 uint8_t subpage; 553 uint16_t page_len; 554 uint8_t data[]; 555 }; 556 557 union ctl_ha_msg { 558 struct ctl_ha_msg_hdr hdr; 559 struct ctl_ha_msg_task task; 560 struct ctl_ha_msg_scsi scsi; 561 struct ctl_ha_msg_dt dt; 562 struct ctl_ha_msg_pr pr; 563 struct ctl_ha_msg_ua ua; 564 struct ctl_ha_msg_port port; 565 struct ctl_ha_msg_lun lun; 566 struct ctl_ha_msg_iid iid; 567 struct ctl_ha_msg_login login; 568 struct ctl_ha_msg_mode mode; 569 }; 570 571 struct ctl_prio { 572 struct ctl_io_hdr io_hdr; 573 struct ctl_ha_msg_pr pr_msg; 574 }; 575 576 union ctl_io { 577 struct ctl_io_hdr io_hdr; /* common to all I/O types */ 578 struct ctl_scsiio scsiio; /* Normal SCSI commands */ 579 struct ctl_taskio taskio; /* SCSI task management/reset */ 580 struct ctl_prio presio; /* update per. res info on other SC */ 581 }; 582 583 #ifdef _KERNEL 584 585 union ctl_io *ctl_alloc_io(void *pool_ref); 586 union ctl_io *ctl_alloc_io_nowait(void *pool_ref); 587 void ctl_free_io(union ctl_io *io); 588 void ctl_zero_io(union ctl_io *io); 589 590 #endif /* _KERNEL */ 591 592 #endif /* _CTL_IO_H_ */ 593 594 /* 595 * vim: ts=8 596 */ 597