# $MirOS: src/gnu/usr.bin/perl/Makefile.bsd-wrapper,v 1.35 2014/03/13 03:03:18 tg Exp $
# $OpenBSD: Makefile.bsd-wrapper,v 1.75 2007/11/26 11:12:29 espie Exp $
#
# Build wrapper for Perl 5.8.8
#

.include <bsd.own.mk>

TARGET_MACHINE_ARCH?=	$(MACHINE_ARCH)

# To build a threaded perl, uncomment this.  Not stable on all platforms...
#THREADED_PERL=	Yes
THREADED_PERL?=	No

# Perl builds with -fno-strict-aliasing, we want libperl to do the same
COPTS+=		-fno-strict-aliasing
COPTS+=		-fno-delete-null-pointer-checks

# Arguments passed to Configure...
.if ${THREADED_PERL:L} == "yes"
CONFIGURE_ARGS+=-Dusethreads
CFLAGS+=	-pthread
.endif

XFLAGS=		${CFLAGS} -Werror-maybe-reset
CONFIGURE_ARGS+=-dsE -D${OSname}_distribution=defined \
		-Doptimize=${XFLAGS:N-g*:M*:Q}

.if ${NOPIC:L} != "no"
FLAGS_TO_PASS=	USEDL=n
.else
FLAGS_TO_PASS=	USEDL=y
.endif
FLAGS_TO_PASS+=	CC=${CC:Q} CPP=${CPP:Q} CFLAGS=${XFLAGS:M*:Q} SHELL=${SHELL:Q}
FLAGS_TO_PASS+=	PATH=/bin:/usr/bin:/sbin:/usr/sbin

# Our lndir is hacked; specify a full path to avoid potential conflicts
# with the one installed with X11.
LNDIR=		/usr/bin/lndir

H2PH=		/usr/bin/h2ph

LIB=		perl
DPADD+=		${LIBM} ${LIBUTIL}
LDADD+=		-lm -lutil

SRCS=	perl.c gv.c toke.c perly.c op.c pad.c regcomp.c dump.c util.c mg.c \
	reentr.c hv.c av.c run.c pp_hot.c sv.c pp.c scope.c pp_ctl.c pp_sys.c \
	doop.c doio.c regexec.c utf8.c taint.c deb.c universal.c xsutils.c \
	globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c

CPPFLAGS+=	-DPERL_CORE -DPERL_RANDOM_DEVICE=\"/dev/arandom\" -I.

# MirPorts Framework support
CPPFLAGS+=	-DAPPLLIB_EXP=\"/usr/mpkg/libdata/perl5:/usr/mpkg/libdata/perl5/site_perl\"

.if defined(INSTALL_STRIP) && ${INSTALL_STRIP} == "-s"
STRIPFLAGS=	-s
.endif

GEN_AFTER= 	config.h cflags makeaperl makedepend makedir \
		myconfig writemain Makefile Policy.sh pod/Makefile \
		x2p/Makefile x2p/cflags

GENERATED=	config.sh ${GEN_AFTER}

${GEN_AFTER}: config.sh

CLEANFILES=	config.sh Policy.sh ${MANALL} ${PSALL} ${MANSRCALL} stamp-mansrc.build

.if !exists(${.OBJDIR}/config.over)
${.OBJDIR}/config.over: ${.CURDIR}/config.over
	${LNDIR} -s -e obj -e obj.${MACHINE_ARCH} -e Makefile.bsd-wrapper -e Makefile.bsd-wrapper1 ${.CURDIR}
.endif

all:	perl.build man.build


man.build: perl.build
	cd ${.CURDIR} && exec ${MAKE} -f Makefile.bsd-wrapper1 $@

beforedepend:	config.sh config.h Makefile makedepend x2p/Makefile writemain
	cd ${.OBJDIR} && exec ${MAKE} depend

perl.build:	perl.lib
	cd ${.OBJDIR} && ${FLAGS_TO_PASS} exec ${MAKE}

config.sh:	${.OBJDIR}/config.over
	cd ${.OBJDIR} && GCC_NO_WERROR=1 ${FLAGS_TO_PASS} \
	    exec ${SHELL} Configure ${CONFIGURE_ARGS}

Makefile cflags makeaperl makedepend makedir myconfig writemain:
	cd ${.OBJDIR} && ${FLAGS_TO_PASS} exec ${SHELL} $@.SH

Policy.sh:
	cd ${.OBJDIR} && ${FLAGS_TO_PASS} exec ${SHELL} Policy_sh.SH

config.h:
	cd ${.OBJDIR} && ${FLAGS_TO_PASS} exec ${SHELL} config_h.SH

pod/Makefile:
	cd ${.OBJDIR}/pod && ${FLAGS_TO_PASS} exec ${SHELL} Makefile.SH

x2p/Makefile:
	cd ${.OBJDIR}/x2p && ${FLAGS_TO_PASS} exec ${SHELL} Makefile.SH

x2p/cflags:
	cd ${.OBJDIR}/x2p && ${FLAGS_TO_PASS} exec ${SHELL} cflags.SH

# Never try to regenerate perly.c or perly.h
perly.c perly.h: perly.y
	-@true

install: install.lib install.perl maninstall
	-chmod -R a+rX ${DESTDIR}/usr/libdata/perl5

install.perl:
	cd ${.OBJDIR}; INSTALL=${INSTALL} INSTALL_COPY=${INSTALL_COPY} \
	    STRIPFLAGS=${STRIPFLAGS} INSTALLFLAGS=-o NOLIBINSTALL=1 \
	    LD_LIBRARY_PATH=${.OBJDIR} exec ./perl installperl \
	    --destdir=${DESTDIR} -o STRIPFLAGS=${STRIPFLAGS}
	printf '%s\n%s\n%s\nwq\n' '/^optimize=/g/-Werror-maybe-reset/s///' \
	    '/^optimize=/g/-Werror/s///' "/^optimize=/g/  *'/s//'/" | \
	    ed -s ${DESTDIR}$$(perl -e 'use Config; print \
	    $$Config{installarchlib};')/Config_heavy.pl

.if exists(/usr/lib/libposixtz.so)
TEST_ENV+=		LD_PRELOAD=/usr/lib/libposixtz.so
.endif

test:
	-@cd "$$(realpath .)"; \
	    if [ -e Makefile ]; then ${TEST_ENV} ${MAKE} test; fi

clean:
	-@if [ -e Makefile ]; then ${MAKE} realclean; fi

cleandir:
	-@if [ ${.CURDIR} != ${.OBJDIR} ]; then \
	    rm -rf *; \
	else \
	    test -e Makefile && ${MAKE} distclean; \
	    rm -f ${CLEANFILES}; \
	fi
	@cd ${.CURDIR} && ${MAKE} -f Makefile.bsd-wrapper1 cleandir

maninstall:
.if defined(NOMAN) && ${NOMAN:L} != "no"
	@echo NOMAN is set
.else
	@cd ${.CURDIR} && exec ${MAKE} -f Makefile.bsd-wrapper1 maninstall
.endif

.include <bsd.lib.mk>

# These have to come after the inclusion of <bsd.lib.mk>

# Need -fPIC, not -fpic on sparc
.if ($(TARGET_MACHINE_ARCH) == sparc)
PICFLAG=	-fPIC
.endif

perl.lib:	${GENERATED} .WAIT ${_LIBS}

install.lib:
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m ${LIBMODE} \
	    lib${LIB}.a ${DESTDIR}${LIBDIR}/
.if ${NOPIC:L} == "no"
.  ifdef SHLIB_SONAME
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m 600 \
	    ${SHLIB_SONAME} ${DESTDIR}${LIBDIR}/${SHLIB_SONAME}~
.    if !defined(MKC_DEBG) || ${MKC_DEBG:L} == "no"
	${STRIP} ${_SODISCARD} ${DESTDIR}${LIBDIR}/${SHLIB_SONAME}~
.    endif
	cd ${DESTDIR}${LIBDIR} && \
	    chmod ${LIBMODE} ${SHLIB_SONAME}~ && \
	    mv -f ${SHLIB_SONAME}~ ${SHLIB_SONAME}
.  endif
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m ${LIBMODE} \
	    lib${LIB}_pic.a ${DESTDIR}${LIBDIR}/
.endif

.PHONY: perl.lib install.lib perl.build install.perl man.build mansrc.build