170 		DEBUGOUT("Error getting PHY ID\n");  in e1000_init_phy_params_82571()
431 			DEBUGOUT("Please update your 82571 Bootagent\n");  in e1000_init_mac_params_82571()
544 		DEBUGOUT("Driver can't access device - SMBI bit is set.\n");  in e1000_get_hw_semaphore_82571()
562 		DEBUGOUT("Driver can't access the NVM\n");  in e1000_get_hw_semaphore_82571()
618 		DEBUGOUT("Driver can't access the PHY\n");  in e1000_get_hw_semaphore_82573()
925 		DEBUGOUT("nvm parameter(s) out of bounds\n");  in e1000_write_nvm_eewr_82571()
968 		DEBUGOUT("MNG configuration cycle has not completed.\n");  in e1000_get_cfg_done_82571()
1077 		DEBUGOUT("PCI-E Master disable polling has failed.\n");  in e1000_reset_hw_82571()
1079 	DEBUGOUT("Masking off all interrupts\n");  in e1000_reset_hw_82571()
1107 	DEBUGOUT("Issuing a global reset to MAC\n");  in e1000_reset_hw_82571()
1205 		DEBUGOUT("Error initializing identification LED\n");  in e1000_init_hw_82571()
1208 	DEBUGOUT("Initializing the IEEE VLAN\n");  in e1000_init_hw_82571()
1221 	DEBUGOUT("Zeroing the MTA\n");  in e1000_init_hw_82571()
1680 				DEBUGOUT("AN_UP     -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1700 				DEBUGOUT("FORCED_UP -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1715 					DEBUGOUT("AN_PROG   -> AN_UP\n");  in e1000_check_for_serdes_link_82571()
1721 					DEBUGOUT("AN_PROG   -> DOWN\n");  in e1000_check_for_serdes_link_82571()
1737 					DEBUGOUT("Error config flow control\n");  in e1000_check_for_serdes_link_82571()
1743 				DEBUGOUT("AN_PROG   -> FORCED_UP\n");  in e1000_check_for_serdes_link_82571()
1759 			DEBUGOUT("DOWN      -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1766 			DEBUGOUT("ANYSTATE  -> DOWN\n");  in e1000_check_for_serdes_link_82571()
1783 					DEBUGOUT("ANYSTATE  -> DOWN\n");  in e1000_check_for_serdes_link_82571()
1795 				DEBUGOUT("ANYSTATE  -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1819 		DEBUGOUT("NVM Read Error\n");  in e1000_valid_led_default_82571()