Lines Matching refs:transfer

398  * Initialize transfer settings with SCB provided settings.
661 	 * Main loop for information transfer phases.  Wait for the
736 	 * Do we need any more segments for this transfer?
809 	 * If the transfer is less than a cachline,
845 	 * phase, our transfer location has almost certainly been
847 	 * the host driver to fix us up based on the transfer residual.
919 		 * The transfer is complete if either the last segment
940 		 * The transfer has terminated either due to a phase
963 		 * in this transfer.
966 		 * to fetch additional segments for this transfer,
1014 		 * transfer messages prior to doing this, but this
1050 			 * LAST_SEG_DONE to come true on a completed transfer
1069 		/* Don't clobber an inprogress host data transfer */
1080 			 * data must be "fixed up" once the transfer is halted.
1113 		/* Start DMA data transfer. */
1123 		 * We will be "done" DMAing when the transfer count goes to
1126 		 * PHASEMIS is active).  If we are doing a SCSI->Host transfer,
1135 		/* Don't clobber an inprogress host data transfer */
1745 	 * transfer, just mark us at the end rather than perform a
1762 	 * any message transfer.
2257 			 * transfer, we must empty the fifo of all
2259 			 * continue the transfer.  This does not
2289 			/* Restore A as the lines left to transfer. */