Lines Matching refs:control

31    This document describes a control for the Lightweight Directory
34    match a "values return" filter.  Without support for this control, a
49    some user defined selection criteria.  Without the control specified
67    This document specifies an LDAPv3 control to enable a user to return
69    elements of a newly defined "values return" filter.  This control can
80    The valuesReturnFilter control is either critical or non-critical as
83    client.  If the server supports the control and it is present on a
84    Search operation, the server MUST obey the control, regardless of the
87    If the control is marked as critical, and either the server does not
88    support the control or the control is applied to an operation other
90    error.  If the control is not marked as critical, and either the
91    server does not support the control or the control is applied to an
92    operation other than Search, then the server MUST ignore the control.
94    The object identifier for this control is 1.2.826.0.1.3344810.2.3.
128    If the server supports this control, the server MUST make use of the
129    control as follows:
133       entries).  The control has no impact on this step.
136       control has no effect and the Search Request is processed as if
137       the control had not been specified.
141       no attributes are to be returned), the control has no effect and
142       the Search Request is processed as if the control had not been
146       Search Request, the server MUST apply the control as follows to
159    comprises "*", then the control MUST be applied against every user
161    control MUST be applied against every operational attribute.
177    The control is a superset of the matchedValuesOnly (MVO) boolean of
192    The purpose of this control is to select zero, one, or more attribute
195    by this control, they MUST NOT be re-instated into the Search results
198    This control acts independently of other LDAP controls such as server
200    be interactions between this control and other controls so that a
203    this control and other controls in the LDAP request.  For example,
216    For these reasons, the ValuesReturnFilter control in a SearchRequest
262    1) The first example shows how the control can be set to return all
299    control is set to ((mail=*hotmail.com)(telephoneNumber=*)).
309    Note that the control has no effect on the values returned for the
311    the control specified that all values should be returned.
368    3) The final example shows how the control can be used to match on a
402    "userCertificate;binary".  In addition, a ValuesReturnFilter control
418    and in this respect the effect of the ValuesReturnFilter control is
421    Note that the ValuesReturnFilter control may have a positive effect
425    matching rules at the server, since the control avoids the
432    The Matched Values control as an LDAP Protocol Mechanism [7] has been
456    matchedValues control described here.  This OID was assigned by
466    syntax for this control.