Lines Matching refs:default
29 taken in the use of this directive. The default is not to accept
35 (use IPv6 only). The default is ``any''.
39 default is ``yes''. Note that disabling agent forwarding does
48 ID is not recognized. By default, login is allowed for all
60 remote forwarding only. The default is ``yes''. Note that
69 valid; a numerical user ID is not recognized. By default, login
103 enabled in the configuration. The default is not to require
116 the usual AuthorizedKeysFile files. By default, no
135 listed, separated by whitespace. The default is
155 The default is ``none'', i.e. not to use a principals file - in
167 protocol version 2. By default, no banner is displayed.
172 login.conf(5)) The default is ``yes''.
197 The default is not to chroot(2).
209 The default is:
233 The default value is 3. If ClientAliveInterval (see below) is
234 set to 15, and ClientAliveCountMax is left at the default,
242 client. The default is 0, indicating that these messages will
249 ``yes'', ``delayed'', or ``no''. The default is ``delayed''.
256 recognized. By default, login is allowed for all groups. The
266 numerical user ID is not recognized. By default, login is
289 forwarded for the client. By default, sshd(8) binds remote port
298 which the forwarding is bound. The default is ``no''.
302 The default is ``no''. Note that this option applies to protocol
307 cache on logout. The default is ``yes''. Note that this option
315 The default is ``no''.
323 resolve the name from the TCP connection itself. The default is
329 specified by HostKey. The default behaviour of sshd(8) is not to
334 default is /etc/ssh/ssh_host_key for protocol version 1, and
356 default is ``yes''.
361 HostbasedAuthentication. The default is ``no''.
373 for non-interactive sessions. The default is ``lowdelay'' for
380 default is to use whatever value ChallengeResponseAuthentication
381 is set to (by default ``yes'').
387 which allows the verification of the KDC's identity. The default
393 The default is ``no''.
398 such as /etc/passwd. The default is ``yes''.
402 cache file on logout. The default is ``yes''.
406 algorithms must be comma-separated. The default is
421 key is never regenerated. The default is 3600 (seconds).
432 prior Port options specified. The default is to listen on all
440 limit. The default is 120 seconds.
445 VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is INFO.
455 safer and their use recommended. The default is:
506 value, additional failures are logged. The default is 6.
510 network connection. The default is 10.
516 expires for a connection. The default is 10:30:100.
528 default is ``yes''.
533 default is ``no''.
548 default all port forwarding requests are permitted.
553 or ``no''. The default is ``yes''.
570 both ``point-to-point'' and ``ethernet''. The default is ``no''.
573 Specifies whether pty(4) allocation is permitted. The default is
578 ~/.ssh/authorized_keys are processed by sshd(8). The default is
585 daemon. The default is /var/run/sshd.pid.
587 Port Specifies the port number that sshd(8) listens on. The default
593 last user login when a user logs in interactively. The default
599 shell, /etc/profile, or equivalent.) The default is ``yes''.
604 separated. The default is `2'. Note that the order of the
611 default is ``yes''. Note that this option applies to protocol
620 Megabytes, or Gigabytes, respectively. The default is between
623 documented in the TIME FORMATS section. The default value for
624 RekeyLimit is ``default none'', which means that rekeying is
625 performed after the cipher's default amount of data has been sent
641 default is ``no''. This option applies to protocol version 1
646 default is ``yes''. This option applies to protocol version 1
651 server key. The minimum value is 512, and the default is 1024.
657 leave their directory or files world-writable. The default is
673 By default no subsystems are defined. Note that this option
680 default is AUTH.
692 The default is ``yes'' (to send TCP keepalive messages), and the
713 back to the very same IP address. The default is ``yes''.
717 sessions. The default is ``no''. Note that login(1) is never
734 non-root user. The default is ``no''.
743 default is ``yes''. If UsePrivilegeSeparation is set to
749 protocol banner sent by the server upon connection. The default
755 servers. The default is 10.
759 be ``yes'' or ``no''. The default is ``no''.
764 X11UseLocalhost below), though this is not the default.
782 to the loopback address or to the wildcard address. By default,
790 default is ``yes''.
793 Specifies the full pathname of the xauth(1) program. The default