1209 		device_printf(sc->msk_dev,  in mskc_setup_rambuffer()
1230 			device_printf(sc->msk_dev,  in mskc_setup_rambuffer()
1234 			device_printf(sc->msk_dev,  in mskc_setup_rambuffer()
1381 	status = pci_read_config(sc->msk_dev, PCIR_STATUS, 2);  in mskc_reset()
1384 	pci_write_config(sc->msk_dev, PCIR_STATUS, status |  in mskc_reset()
1402 		val = pci_read_config(sc->msk_dev, PCIR_CACHELNSZ, 1);  in mskc_reset()
1404 			pci_write_config(sc->msk_dev, PCIR_CACHELNSZ, 2, 1);  in mskc_reset()
1407 			val = pci_read_config(sc->msk_dev, PCI_OUR_REG_1, 4);  in mskc_reset()
1409 			pci_write_config(sc->msk_dev, PCI_OUR_REG_1, val, 4);  in mskc_reset()
1507 		pcix_cmd = pci_read_config(sc->msk_dev,  in mskc_reset()
1512 		pci_write_config(sc->msk_dev,  in mskc_reset()
1518 		if (pci_get_max_read_req(sc->msk_dev) == 512)  in mskc_reset()
1519 			pci_set_max_read_req(sc->msk_dev, 2048);  in mskc_reset()
1747 	sc->msk_dev = dev;  in mskc_attach()
1831 	if (pci_find_cap(sc->msk_dev, PCIY_EXPRESS, &reg) == 0) {  in mskc_attach()
1834 	} else if (pci_find_cap(sc->msk_dev, PCIY_PCIX, &reg) == 0) {  in mskc_attach()
2162 		    bus_get_dma_tag(sc->msk_dev),	/* parent */  in msk_status_dma_alloc()
2174 		device_printf(sc->msk_dev,  in msk_status_dma_alloc()
2184 		device_printf(sc->msk_dev,  in msk_status_dma_alloc()
2193 		device_printf(sc->msk_dev,  in msk_status_dma_alloc()
3502 		device_printf(sc->msk_dev,  in msk_intr_hwerr()
3510 			device_printf(sc->msk_dev,  in msk_intr_hwerr()
3513 			device_printf(sc->msk_dev,  in msk_intr_hwerr()
3516 		v16 = pci_read_config(sc->msk_dev, PCIR_STATUS, 2);  in msk_intr_hwerr()
3518 		pci_write_config(sc->msk_dev, PCIR_STATUS, v16 |  in msk_intr_hwerr()
3539 			device_printf(sc->msk_dev,  in msk_intr_hwerr()
3620 			device_printf(sc->msk_dev, "invalid port opcode "  in msk_handle_events()
3668 			device_printf(sc->msk_dev, "unhandled opcode 0x%08x\n",  in msk_handle_events()
3728 		device_printf(sc->msk_dev, "Rx descriptor error\n");  in msk_intr()
3734 		device_printf(sc->msk_dev, "Tx descriptor error\n");  in msk_intr()