95 		phy->ops.power_up = e1000_power_up_phy_copper;  in e1000_init_phy_params_82543()
96 		phy->ops.power_down = e1000_power_down_phy_copper;  in e1000_init_phy_params_82543()
105 	phy->ops.check_polarity	= e1000_check_polarity_m88;  in e1000_init_phy_params_82543()
106 	phy->ops.commit		= e1000_phy_sw_reset_generic;  in e1000_init_phy_params_82543()
107 	phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82543;  in e1000_init_phy_params_82543()
108 	phy->ops.get_cable_length = e1000_get_cable_length_m88;  in e1000_init_phy_params_82543()
109 	phy->ops.get_cfg_done	= e1000_get_cfg_done_generic;  in e1000_init_phy_params_82543()
110 	phy->ops.read_reg	= (hw->mac.type == e1000_82543)  in e1000_init_phy_params_82543()
113 	phy->ops.reset		= (hw->mac.type == e1000_82543)  in e1000_init_phy_params_82543()
116 	phy->ops.write_reg	= (hw->mac.type == e1000_82543)  in e1000_init_phy_params_82543()
119 	phy->ops.get_info	= e1000_get_phy_info_m88;  in e1000_init_phy_params_82543()
127 		ret_val = phy->ops.reset(hw);  in e1000_init_phy_params_82543()
180 	nvm->ops.read		= e1000_read_nvm_microwire;  in e1000_init_nvm_params_82543()
181 	nvm->ops.update		= e1000_update_nvm_checksum_generic;  in e1000_init_nvm_params_82543()
182 	nvm->ops.valid_led_default = e1000_valid_led_default_generic;  in e1000_init_nvm_params_82543()
183 	nvm->ops.validate	= e1000_validate_nvm_checksum_generic;  in e1000_init_nvm_params_82543()
184 	nvm->ops.write		= e1000_write_nvm_microwire;  in e1000_init_nvm_params_82543()
218 	mac->ops.get_bus_info = e1000_get_bus_info_pci_generic;  in e1000_init_mac_params_82543()
220 	mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pci;  in e1000_init_mac_params_82543()
222 	mac->ops.reset_hw = e1000_reset_hw_82543;  in e1000_init_mac_params_82543()
224 	mac->ops.init_hw = e1000_init_hw_82543;  in e1000_init_mac_params_82543()
226 	mac->ops.setup_link = e1000_setup_link_82543;  in e1000_init_mac_params_82543()
228 	mac->ops.setup_physical_interface =  in e1000_init_mac_params_82543()
232 	mac->ops.check_for_link =  in e1000_init_mac_params_82543()
237 	mac->ops.get_link_up_info =  in e1000_init_mac_params_82543()
242 	mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;  in e1000_init_mac_params_82543()
244 	mac->ops.write_vfta = e1000_write_vfta_82543;  in e1000_init_mac_params_82543()
246 	mac->ops.clear_vfta = e1000_clear_vfta_generic;  in e1000_init_mac_params_82543()
248 	mac->ops.read_mac_addr = e1000_read_mac_addr_82543;  in e1000_init_mac_params_82543()
250 	mac->ops.led_on = e1000_led_on_82543;  in e1000_init_mac_params_82543()
251 	mac->ops.led_off = e1000_led_off_82543;  in e1000_init_mac_params_82543()
253 	mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82543;  in e1000_init_mac_params_82543()
273 	hw->mac.ops.init_params = e1000_init_mac_params_82543;  in e1000_init_function_pointers_82543()
274 	hw->nvm.ops.init_params = e1000_init_nvm_params_82543;  in e1000_init_function_pointers_82543()
275 	hw->phy.ops.init_params = e1000_init_phy_params_82543;  in e1000_init_function_pointers_82543()
774 	if (!(hw->phy.ops.write_reg))  in e1000_polarity_reversal_workaround_82543()
781 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);  in e1000_polarity_reversal_workaround_82543()
784 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);  in e1000_polarity_reversal_workaround_82543()
788 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);  in e1000_polarity_reversal_workaround_82543()
802 		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);  in e1000_polarity_reversal_workaround_82543()
806 		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);  in e1000_polarity_reversal_workaround_82543()
820 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);  in e1000_polarity_reversal_workaround_82543()
824 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);  in e1000_polarity_reversal_workaround_82543()
828 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);  in e1000_polarity_reversal_workaround_82543()
832 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);  in e1000_polarity_reversal_workaround_82543()
836 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);  in e1000_polarity_reversal_workaround_82543()
887 	if (!(hw->phy.ops.get_cfg_done))  in e1000_phy_hw_reset_82543()
890 	ret_val = hw->phy.ops.get_cfg_done(hw);  in e1000_phy_hw_reset_82543()
940 	hw->nvm.ops.reload(hw);  in e1000_reset_hw_82543()
968 	mac->ops.clear_vfta(hw);  in e1000_init_hw_82543()
993 	ret_val = mac->ops.setup_link(hw);  in e1000_init_hw_82543()
1035 		ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &data);  in e1000_setup_link_82543()
1078 		ret_val = hw->phy.ops.reset(hw);  in e1000_setup_copper_link_82543()
1126 			hw->mac.ops.config_collision_dist(hw);  in e1000_setup_copper_link_82543()
1160 	hw->mac.ops.config_collision_dist(hw);  in e1000_setup_fiber_link_82543()
1258 		hw->mac.ops.config_collision_dist(hw);  in e1000_check_for_copper_link_82543()
1286 		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);  in e1000_check_for_copper_link_82543()
1411 	if (!(hw->phy.ops.read_reg))  in e1000_config_mac_to_phy_82543()
1423 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);  in e1000_config_mac_to_phy_82543()
1431 	hw->mac.ops.config_collision_dist(hw);  in e1000_config_mac_to_phy_82543()
1578 		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);  in e1000_read_mac_addr_82543()