Lines Matching refs:servers

153 client mode association with a number of remote servers.
175 This is useful in a network of servers where, depending on
215 the designated manycast servers.
224 is to operate in client mode with the remote servers that are
231 servers respond to these messages.
232 The client selects the servers
236 The remaining servers are discarded as if never
500 for servers as described in the
506 of manycast mode is that potential servers need not be
522 The servers and clients involved must
594 The specific cryptographic environment used by Autokey servers
630 until the name servers have synchronized clocks.
658 and corporate NTP servers are operated outside firewall perimeters.
664 servers and peers may not all support the same cryptotypes.
742 Now, Bob can act just like the girls in his own choice of servers;
744 servers (or the same server, although that might not be useful).
919 and remote servers share the same key and key identifier for this
921 servers.
1355 time servers.
1360 from congesting innocent servers, it should not be considered
1529 associations, so if you want to use servers from a 
1588 manycast servers, validate them using cryptographic means
1589 and evaluate their time values with respect to other servers
1593 of the nearby manycast servers, yet automatically reconfigures
1594 to sustain this number of servers should one or another fail.
1599 of servers providing the same service.
1601 of redundant servers satisfying defined optimality criteria.
1624 When more servers are needed, it broadcasts manycast
1627 on how many servers have already been found.
1632 Manycast servers configured with the
1704 candidate servers must be available and the mitigation
1718 number of servers are available.
1722 servers are found, the manycast poll interval is immediately
1727 servers are found when the TTL has reached the maximum hops,
1749 servers which can be found by manycast client associations.
1750 Because manycast servers respond only when the client
1752 primary (stratum 1) servers fill find only primary servers
1755 in TTL range will eventually find all primary servers
1768 process; however, these servers may be temporally
1769 accepted if the number of servers within TTL range is
1786 all manycast servers in TTL range to respond.
1788 depending on the number of servers in range.
1800 subnet of two primary servers and a hundred or more
1802 With two exceptions, all servers
1814 servers and clients have the same contents, except for the
1817 For stratum 1 and stratum 2 servers, that command is
1819 For stratum 3 and above servers the
1826 the primary servers will find the primary reference source
1831 servers will find the servers at the same stratum level.
1832 If one of the primary servers loses its GPS receiver,
1845 In either case the servers must be
1860 to a multicast group address, all manycast servers
1870 from the client to the primary servers are collected in this way.
1887 from there while collecting all servers in scope.
2251 servers.