/* $OpenBSD: xhcireg.h,v 1.20 2024/09/04 07:54:52 mglocker Exp $ */ /*- * Copyright (c) 2014 Martin Pieuchot. All rights reserved. * Copyright (c) 2010 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _XHCIREG_H_ #define _XHCIREG_H_ /* Data Structure Boundary and Alignment Requirement. */ #define XHCI_DCBAA_ALIGN 64 #define XHCI_ICTX_ALIGN 64 #define XHCI_SCTX_ALIGN 32 #define XHCI_OCTX_ALIGN 32 #define XHCI_XFER_RING_ALIGN 16 #define XHCI_CMDS_RING_ALIGN 64 #define XHCI_EVTS_RING_ALIGN 64 #define XHCI_RING_BOUNDARY (64 * 1024) #define XHCI_ERST_ALIGN 64 #define XHCI_ERST_BOUNDARY 0 #define XHCI_SPAD_TABLE_ALIGN 64 /* XHCI PCI config registers */ #define PCI_CBMEM 0x10 /* configuration base MEM */ #define PCI_INTERFACE_XHCI 0x30 #define PCI_USBREV 0x60 /* RO USB protocol revision */ #define PCI_USBREV_MASK 0xff #define PCI_USBREV_3_0 0x30 /* USB 3.0 */ #define PCI_XHCI_FLADJ 0x61 /* RW frame length adjust */ #define PCI_XHCI_INTEL_XUSB2PR 0xd0 /* Intel USB2 Port Routing */ #define PCI_XHCI_INTEL_XUSB2PRM 0xd4 /* Intel USB2 Port Routing Mask */ #define PCI_XHCI_INTEL_USB3_PSSEN 0xd8 /* Intel USB3 Port SuperSpeed Enable */ #define PCI_XHCI_INTEL_USB3PRM 0xdc /* Intel USB3 Port Routing Mask */ /* XHCI capability registers */ #define XHCI_CAPLENGTH 0x00 /* RO Capability reg. length field */ #define XHCI_RESERVED 0x01 /* Reserved */ #define XHCI_HCIVERSION 0x02 /* RO Interface version number */ #define XHCI_HCIVERSION_0_9 0x0090 /* xHCI version 0.9 */ #define XHCI_HCIVERSION_1_0 0x0100 /* xHCI version 1.0 */ #define XHCI_HCSPARAMS1 0x04 /* RO structural parameters 1 */ #define XHCI_HCS1_DEVSLOT_MAX(x)((x) & 0xff) #define XHCI_HCS1_IRQ_MAX(x) (((x) >> 8) & 0x3ff) #define XHCI_HCS1_N_PORTS(x) (((x) >> 24) & 0xff) #define XHCI_HCSPARAMS2 0x08 /* RO structural parameters 2 */ #define XHCI_HCS2_IST(x) ((x) & 0x7) #define XHCI_HCS2_IST_MICRO(x) (!((x) & 0x8)) #define XHCI_HCS2_ERST_MAX(x) (((x) >> 4) & 0xf) #define XHCI_HCS2_ETE(x) (((x) >> 8) & 0x1) #define XHCI_HCS2_SPR(x) (((x) >> 26) & 0x1) #define XHCI_HCS2_SPB_MAX(x) ((((x) >> 16) & 0x3e0) | (((x) >> 27) & 0x1f)) #define XHCI_HCSPARAMS3 0x0c /* RO structural parameters 3 */ #define XHCI_HCS3_U1_DEL(x) ((x) & 0xff) #define XHCI_HCS3_U2_DEL(x) (((x) >> 16) & 0xffff) #define XHCI_HCCPARAMS 0x10 /* RO capability parameters */ #define XHCI_HCC_AC64(x) (((x) >> 0) & 0x1) /* 64-bit capable */ #define XHCI_HCC_BNC(x) (((x) >> 1) & 0x1) /* BW negotiation */ #define XHCI_HCC_CSZ(x) (((x) >> 2) & 0x1) /* Context size */ #define XHCI_HCC_PPC(x) (((x) >> 3) & 0x1) /* Port power control */ #define XHCI_HCC_PIND(x) (((x) >> 4) & 0x1) /* Port indicators */ #define XHCI_HCC_LHRC(x) (((x) >> 5) & 0x1) /* Light HC reset */ #define XHCI_HCC_LTC(x) (((x) >> 6) & 0x1) /* Latency tolerance msg */ #define XHCI_HCC_NSS(x) (((x) >> 7) & 0x1) /* No secondary sid */ #define XHCI_HCC_PAE(x) (((x) >> 8) & 0x1) /* Parse All Event Data */ #define XHCI_HCC_SPC(x) (((x) >> 9) & 0x1) /* Short packet */ #define XHCI_HCC_SEC(x) (((x) >> 10) & 0x1) /* Stopped EDTLA */ #define XHCI_HCC_CFC(x) (((x) >> 11) & 0x1) /* Contiguous Frame ID */ #define XHCI_HCC_MAX_PSA_SZ(x) (((x) >> 12) & 0xf) /* Max pri. stream arr. */ #define XHCI_HCC_XECP(x) (((x) >> 16) & 0xffff) /* Ext. capabilities */ #define XHCI_DBOFF 0x14 /* RO doorbell offset */ #define XHCI_RTSOFF 0x18 /* RO runtime register space offset */ /* * XHCI operational registers. * Offset given by XHCI_CAPLENGTH register. */ #define XHCI_USBCMD 0x00 /* XHCI command */ #define XHCI_CMD_RS 0x00000001 /* RW Run/Stop */ #define XHCI_CMD_HCRST 0x00000002 /* RW Host Controller Reset */ #define XHCI_CMD_INTE 0x00000004 /* RW Interrupter Enable */ #define XHCI_CMD_HSEE 0x00000008 /* RW Host System Error Enable */ #define XHCI_CMD_LHCRST 0x00000080 /* RO/RW Light HC Reset */ #define XHCI_CMD_CSS 0x00000100 /* RW Controller Save State */ #define XHCI_CMD_CRS 0x00000200 /* RW Controller Restore State */ #define XHCI_CMD_EWE 0x00000400 /* RW Enable Wrap Event */ #define XHCI_CMD_EU3S 0x00000800 /* RW Enable U3 MFINDEX Stop */ #define XHCI_USBSTS 0x04 /* XHCI status */ #define XHCI_STS_HCH 0x00000001 /* RO - Host Controller Halted */ #define XHCI_STS_HSE 0x00000004 /* RW - Host System Error */ #define XHCI_STS_EINT 0x00000008 /* RW - Event Interrupt */ #define XHCI_STS_PCD 0x00000010 /* RW - Port Change Detect */ #define XHCI_STS_SSS 0x00000100 /* RO - Save State Status */ #define XHCI_STS_RSS 0x00000200 /* RO - Restore State Status */ #define XHCI_STS_SRE 0x00000400 /* RW - Save/Restore Error */ #define XHCI_STS_CNR 0x00000800 /* RO - Controller Not Ready */ #define XHCI_STS_HCE 0x00001000 /* RO - Host Controller Error */ #define XHCI_PAGESIZE 0x08 /* XHCI page size mask */ #define XHCI_PAGESIZE_4K 0x00000001 /* 4K Page Size */ #define XHCI_PAGESIZE_8K 0x00000002 /* 8K Page Size */ #define XHCI_PAGESIZE_16K 0x00000004 /* 16K Page Size */ #define XHCI_PAGESIZE_32K 0x00000008 /* 32K Page Size */ #define XHCI_PAGESIZE_64K 0x00000010 /* 64K Page Size */ #define XHCI_DNCTRL 0x14 /* XHCI device notification control */ #define XHCI_DNCTRL_MASK(n) (1 << (n)) #define XHCI_CRCR_LO 0x18 /* XHCI command ring control */ #define XHCI_CRCR_LO_RCS 0x00000001 /* RW - consumer cycle state */ #define XHCI_CRCR_LO_CS 0x00000002 /* RW - command stop */ #define XHCI_CRCR_LO_CA 0x00000004 /* RW - command abort */ #define XHCI_CRCR_LO_CRR 0x00000008 /* RW - command ring running */ #define XHCI_CRCR_LO_MASK 0x0000000F #define XHCI_CRCR_HI 0x1C /* XHCI command ring control */ #define XHCI_DCBAAP_LO 0x30 /* XHCI dev context BA pointer */ #define XHCI_DCBAAP_HI 0x34 /* XHCI dev context BA pointer */ #define XHCI_CONFIG 0x38 #define XHCI_CONFIG_SLOTS_MASK 0x000000ff /* RW - nb of device slots enabled */ /* * XHCI port status registers. */ #define XHCI_PORTSC(n) (0x3f0 + (0x10 * (n))) /* XHCI port status */ #define XHCI_PS_CCS 0x00000001 /* RO - current connect status */ #define XHCI_PS_PED 0x00000002 /* RW - port enabled / disabled */ #define XHCI_PS_OCA 0x00000008 /* RO - over current active */ #define XHCI_PS_PR 0x00000010 /* RW - port reset */ #define XHCI_PS_GET_PLS(x) (((x) >> 5) & 0xf) /* RW - port link state */ #define XHCI_PS_SET_PLS(x) (((x) & 0xf) << 5) /* RW - port link state */ #define XHCI_PS_PP 0x00000200 /* RW - port power */ #define XHCI_PS_SPEED(x) (((x) >> 10) & 0xf) /* RO - port speed */ #define XHCI_PS_GET_PIC(x) (((x) >> 14) & 0x3) /* RW - port indicator */ #define XHCI_PS_SET_PIC(x) (((x) & 0x3) << 14) /* RW - port indicator */ #define XHCI_PS_LWS 0x00010000 /* RW - link state write strobe */ #define XHCI_PS_CSC 0x00020000 /* RW - connect status change */ #define XHCI_PS_PEC 0x00040000 /* RW - port enable/disable change */ #define XHCI_PS_WRC 0x00080000 /* RW - warm port reset change */ #define XHCI_PS_OCC 0x00100000 /* RW - over-current change */ #define XHCI_PS_PRC 0x00200000 /* RW - port reset change */ #define XHCI_PS_PLC 0x00400000 /* RW - port link state change */ #define XHCI_PS_CEC 0x00800000 /* RW - config error change */ #define XHCI_PS_CAS 0x01000000 /* RO - cold attach status */ #define XHCI_PS_WCE 0x02000000 /* RW - wake on connect enable */ #define XHCI_PS_WDE 0x04000000 /* RW - wake on disconnect enable */ #define XHCI_PS_WOE 0x08000000 /* RW - wake on over-current enable*/ #define XHCI_PS_DR 0x40000000 /* RO - device removable */ #define XHCI_PS_WPR 0x80000000U /* RW - warm port reset */ #define XHCI_PS_CLEAR 0x80ff01ffu /* command bits */ #define XHCI_PORTPMSC(n) (0x3f4 + (0x10 * (n))) /* XHCI status & ctrl */ #define XHCI_PM3_U1TO(x) (((x) & 0xff) << 0) /* RW - U1 timeout */ #define XHCI_PM3_U2TO(x) (((x) & 0xff) << 8) /* RW - U2 timeout */ #define XHCI_PM3_FLA 0x00010000 /* RW - Force Link PM Accept */ #define XHCI_PM2_L1S(x) (((x) >> 0) & 0x7) /* RO - L1 status */ #define XHCI_PM2_RWE 0x00000008 /* RW - remote wakeup enable */ #define XHCI_PM2_HIRD(x) (((x) & 0xf) << 4) /* RW - resume duration */ #define XHCI_PM2_L1SLOT(x) (((x) & 0xff) << 8) /* RW - L1 device slot */ #define XHCI_PM2_HLE 0x00010000 /* RW - hardware LPM enable */ #define XHCI_PORTLI(n) (0x3f8 + (0x10 * (n))) /* XHCI port link info */ #define XHCI_PORTRSV(n) (0x3fC + (0x10 * (n))) /* XHCI port reserved */ /* * XHCI runtime registers. * Offset given by XHCI_CAPLENGTH + XHCI_RTSOFF registers. */ #define XHCI_MFINDEX 0x0000 /* RO - microframe index */ #define XHCI_GET_MFINDEX(x) ((x) & 0x3fff) #define XHCI_IMAN(n) (0x0020 + (0x20 * (n))) /* intr.management */ #define XHCI_IMAN_INTR_PEND 0x00000001 /* RW - interrupt pending */ #define XHCI_IMAN_INTR_ENA 0x00000002 /* RW - interrupt enable */ /* XHCI interrupt moderation */ #define XHCI_IMOD(n) (0x0024 + (0x20 * (n))) #define XHCI_IMOD_IVAL_GET(x) (((x) >> 0) & 0xffff) /* 250ns unit */ #define XHCI_IMOD_IVAL_SET(x) (((x) & 0xffff) << 0) /* 250ns unit */ #define XHCI_IMOD_ICNT_GET(x) (((x) >> 16) & 0xffff) /* 250ns unit */ #define XHCI_IMOD_ICNT_SET(x) (((x) & 0xffff) << 16) /* 250ns unit */ #define XHCI_IMOD_DEFAULT 0x000001F4U /* 8000 IRQ/second */ #define XHCI_IMOD_DEFAULT_LP 0x000003E8U /* 4000 IRQ/second */ /* XHCI event ring segment table size */ #define XHCI_ERSTSZ(n) (0x0028 + (0x20 * (n))) #define XHCI_ERSTS_SET(x) ((x) & 0xffff) /* XHCI event ring segment table BA */ #define XHCI_ERSTBA_LO(n) (0x0030 + (0x20 * (n))) #define XHCI_ERSTBA_HI(n) (0x0034 + (0x20 * (n))) /* XHCI event ring dequeue pointer */ #define XHCI_ERDP_LO(n) (0x0038 + (0x20 * (n))) #define XHCI_ERDP_LO_BUSY 0x00000008 /* RW - event handler busy */ #define XHCI_ERDP_HI(n) (0x003c + (0x20 * (n))) /* * XHCI doorbell registers. * Offset given by XHCI_CAPLENGTH + XHCI_DBOFF registers. */ #define XHCI_DOORBELL(n) (0x0000 + (4 * (n))) #define XHCI_DB_GET_SID(x) (((x) >> 16) & 0xffff) /* RW - stream ID */ #define XHCI_DB_SET_SID(x) (((x) & 0xffff) << 16) /* RW - stream ID */ /* XHCI legacy support */ #define XHCI_XECP_ID(x) ((x) & 0xff) #define XHCI_XECP_NEXT(x) (((x) >> 8) & 0xff) #define XHCI_XECP_BIOS_SEM 0x0002 #define XHCI_XECP_OS_SEM 0x0003 /* XHCI capability ID's */ #define XHCI_ID_USB_LEGACY 0x0001 #define XHCI_ID_PROTOCOLS 0x0002 #define XHCI_ID_POWER_MGMT 0x0003 #define XHCI_ID_VIRTUALIZATION 0x0004 #define XHCI_ID_MSG_IRQ 0x0005 #define XHCI_ID_USB_LOCAL_MEM 0x0006 struct xhci_erseg { uint64_t er_addr; uint32_t er_size; uint32_t er_rsvd; }; struct xhci_sctx { uint32_t info_lo; #define XHCI_SCTX_ROUTE(x) ((x) & 0xfffff) #define XHCI_SCTX_SPEED(x) (((x) & 0xf) << 20) #define XHCI_SCTX_MTT(x) (((x) & 0x1) << 25) #define XHCI_SCTX_HUB(x) (((x) & 0x1) << 26) #define XHCI_SCTX_DCI(x) (((x) & 0x1f) << 27) uint32_t info_hi; #define XHCI_SCTX_MAX_EL(x) ((x) & 0xffff) #define XHCI_SCTX_RHPORT(x) (((x) & 0xff) << 16) #define XHCI_SCTX_NPORTS(x) (((x) & 0xff) << 24) uint32_t tt; #define XHCI_SCTX_TT_HUB_SID(x) ((x) & 0xff) #define XHCI_SCTX_TT_PORT_NUM(x) (((x) & 0xff) << 8) #define XHCI_SCTX_TT_THINK_TIME(x) (((x) & 0x3) << 16) #define XHCI_SCTX_SET_IRQ_TARGET(x) (((x) & 0x3ff) << 22) #define XHCI_SCTX_GET_IRQ_TARGET(x) (((x) >> 22) & 0x3ff) uint32_t state; #define XHCI_SCTX_DEV_ADDR(x) ((x) & 0xff) #define XHCI_SCTX_SLOT_STATE(x) (((x) >> 27) & 0x1f) uint32_t rsvd[4]; }; struct xhci_epctx { uint32_t info_lo; #define XHCI_EPCTX_STATE(x) ((x) & 0x7) #define XHCI_EP_DISABLED 0x0 #define XHCI_EP_RUNNING 0x1 #define XHCI_EP_HALTED 0x2 #define XHCI_EP_STOPPED 0x3 #define XHCI_EP_ERROR 0x4 #define XHCI_EPCTX_SET_MULT(x) (((x) & 0x3) << 8) #define XHCI_EPCTX_GET_MULT(x) (((x) >> 8) & 0x3) #define XHCI_EPCTX_SET_MAXP_STREAMS(x) (((x) & 0x1F) << 10) #define XHCI_EPCTX_GET_MAXP_STREAMS(x) (((x) >> 10) & 0x1F) #define XHCI_EPCTX_SET_LSA(x) (((x) & 0x1) << 15) #define XHCI_EPCTX_GET_LSA(x) (((x) >> 15) & 0x1) #define XHCI_EPCTX_SET_IVAL(x) (((x) & 0xff) << 16) #define XHCI_EPCTX_GET_IVAL(x) (((x) >> 16) & 0xFF) #define XHCI_EPCTX_MAX_IVAL 15 /* Poll rates: 2^(n-1) * 0.125us */ uint32_t info_hi; #define XHCI_EPCTX_SET_CERR(x) (((x) & 0x3) << 1) #define XHCI_EPCTX_SET_EPTYPE(x) (((x) & 0x7) << 3) #define XHCI_EPCTX_GET_EPTYPE(x) (((x) >> 3) & 0x7) #define XHCI_EPCTX_SET_HID(x) (((x) & 0x1) << 7) #define XHCI_EPCTX_GET_HID(x) (((x) >> 7) & 0x1) #define XHCI_EPCTX_SET_MAXB(x) (((x) & 0xff) << 8) #define XHCI_EPCTX_GET_MAXB(x) (((x) >> 8) & 0xff) #define XHCI_EPCTX_SET_MPS(x) (((x) & 0xffff) << 16) #define XHCI_EPCTX_GET_MPS(x) (((x) >> 16) & 0xffff) #define XHCI_SPEED_FULL 1 #define XHCI_SPEED_LOW 2 #define XHCI_SPEED_HIGH 3 #define XHCI_SPEED_SUPER 4 uint64_t deqp; uint32_t txinfo; #define XHCI_EPCTX_AVG_TRB_LEN(x) ((x) & 0xffff) #define XHCI_EPCTX_MAX_ESIT_PAYLOAD(x) (((x) & 0xffff) << 16) uint32_t rsvd[3]; }; struct xhci_inctx { uint32_t drop_flags; uint32_t add_flags; #define XHCI_INCTX_MASK_DCI(n) (0x1 << (n)) uint32_t rsvd[6]; }; struct xhci_trb { uint64_t trb_paddr; #define XHCI_TRB_PORTID(x) (((x) >> 24) & 0xff) /* Port ID */ #define XHCI_TRB_MAXSIZE (64 * 1024) uint32_t trb_status; #define XHCI_TRB_GET_CODE(x) (((x) >> 24) & 0xff) #define XHCI_TRB_TDREM(x) (((x) & 0x1f) << 17) /* TD remaining len. */ #define XHCI_TRB_REMAIN(x) ((x) & 0xffffff) /* Remaining length */ #define XHCI_TRB_LEN(x) ((x) & 0x1ffff) /* Transfer length */ #define XHCI_TRB_INTR(x) (((x) & 0x3ff) << 22) /* MSI-X intr. target */ uint32_t trb_flags; #define XHCI_TRB_CYCLE (1 << 0) /* Enqueue point of xfer ring */ #define XHCI_TRB_ENT (1 << 1) /* Evaluate next TRB */ #define XHCI_TRB_LINKSEG XHCI_TRB_ENT /* Link to next segment */ #define XHCI_TRB_ISP (1 << 2) /* Interrupt on short packet */ #define XHCI_TRB_NOSNOOP (1 << 3) /* PCIe no snoop */ #define XHCI_TRB_CHAIN (1 << 4) /* Chained with next TRB */ #define XHCI_TRB_IOC (1 << 5) /* Interrupt On Completion */ #define XHCI_TRB_IDT (1 << 6) /* Immediate DaTa */ #define XHCI_TRB_ISOC_TBC(x) (((x) & 0x3) << 7) /* Transfer Burst Count */ #define XHCI_TRB_BSR (1 << 9) /* Block Set Address Request */ #define XHCI_TRB_ISOC_BEI (1 << 9) /* Block Event Interrupt */ #define XHCI_TRB_DIR_IN (1 << 16) #define XHCI_TRB_TRT_OUT (2 << 16) #define XHCI_TRB_TRT_IN (3 << 16) #define XHCI_TRB_GET_EP(x) (((x) >> 16) & 0x1f) #define XHCI_TRB_SET_EP(x) (((x) & 0x1f) << 16) #define XHCI_TRB_ISOC_TLBPC(x) (((x) & 0xf) << 16) #define XHCI_TRB_ISOC_FRAME(x) (((x) & 0x7ff) << 20) #define XHCI_TRB_GET_SLOT(x) (((x) >> 24) & 0xff) #define XHCI_TRB_SET_SLOT(x) (((x) & 0xff) << 24) #define XHCI_TRB_SIA (1U << 31) }; #define XHCI_TRB_FLAGS_BITMASK \ "\20" "\040SIA" "\022TRT_OUT" "\021DIR_IN" "\012BSR" "\007IDT" \ "\006IOC" "\005CHAIN" "\004NOSNOOP" "\003ISP" "\002LINKSEG" "\001CYCLE" #define XHCI_TRB_TYPE_MASK 0xfc00 #define XHCI_TRB_TYPE(x) (((x) & XHCI_TRB_TYPE_MASK) >> 10) /* Transfer Ring Types */ #define XHCI_TRB_TYPE_NORMAL (1 << 10) #define XHCI_TRB_TYPE_SETUP (2 << 10) /* Setup stage (ctrl only) */ #define XHCI_TRB_TYPE_DATA (3 << 10) /* Data stage (ctrl only) */ #define XHCI_TRB_TYPE_STATUS (4 << 10) /* Status stage (ctrl only) */ #define XHCI_TRB_TYPE_ISOCH (5 << 10) #define XHCI_TRB_TYPE_LINK (6 << 10) /* Link next seg. (all+cmd) */ #define XHCI_TRB_TYPE_EVENT (7 << 10) /* Generate event (all) */ #define XHCI_TRB_TYPE_NOOP (8 << 10) /* No-Op (all) */ /* Command ring Types */ #define XHCI_CMD_ENABLE_SLOT (9 << 10) #define XHCI_CMD_DISABLE_SLOT (10 << 10) #define XHCI_CMD_ADDRESS_DEVICE (11 << 10) #define XHCI_CMD_CONFIG_EP (12 << 10) #define XHCI_CMD_EVAL_CTX (13 << 10) #define XHCI_CMD_RESET_EP (14 << 10) #define XHCI_CMD_STOP_EP (15 << 10) #define XHCI_CMD_SET_TR_DEQ (16 << 10) #define XHCI_CMD_RESET_DEV (17 << 10) #define XHCI_CMD_FEVENT (18 << 10) #define XHCI_CMD_NEG_BW (19 << 10) /* Negotiate bandwidth */ #define XHCI_CMD_SET_LT (20 << 10) /* Set latency tolerance */ #define XHCI_CMD_GET_BW (21 << 10) /* Get port bandwidth */ #define XHCI_CMD_FHEADER (22 << 10) #define XHCI_CMD_NOOP (23 << 10) /* To test the command ring */ /* Event ring Types */ #define XHCI_EVT_XFER (32 << 10) /* Transfer event */ #define XHCI_EVT_CMD_COMPLETE (33 << 10) #define XHCI_EVT_PORT_CHANGE (34 << 10) /* Port status change */ #define XHCI_EVT_BW_REQUEST (35 << 10) #define XHCI_EVT_DOORBELL (36 << 10) #define XHCI_EVT_HOST_CTRL (37 << 10) #define XHCI_EVT_DEVICE_NOTIFY (38 << 10) #define XHCI_EVT_MFINDEX_WRAP (39 << 10) /* TRB Completion codes */ #define XHCI_CODE_INVALID 0 /* Producer didn't update the code. */ #define XHCI_CODE_SUCCESS 1 /* Badaboum, plaf, plouf, yeepee! */ #define XHCI_CODE_DATA_BUF 2 /* Overrun or underrun */ #define XHCI_CODE_BABBLE 3 /* Device is "babbling" */ #define XHCI_CODE_TXERR 4 /* USB Transaction error */ #define XHCI_CODE_TRB 5 /* Invalid TRB */ #define XHCI_CODE_STALL 6 /* Stall condition */ #define XHCI_CODE_RESOURCE 7 /* No resource available for the cmd */ #define XHCI_CODE_BANDWIDTH 8 /* Not enough bandwidth for the cmd */ #define XHCI_CODE_NO_SLOTS 9 /* MaxSlots limit reached */ #define XHCI_CODE_STREAM_TYPE 10 /* Stream Context Type value detected */ #define XHCI_CODE_SLOT_NOT_ON 11 /* Related device slot is disabled */ #define XHCI_CODE_ENDP_NOT_ON 12 /* Related endpoint is disabled */ #define XHCI_CODE_SHORT_XFER 13 /* Short packet */ #define XHCI_CODE_RING_UNDERRUN 14 /* Empty ring when transmitting isoc */ #define XHCI_CODE_RING_OVERRUN 15 /* Empty ring when receiving isoc */ #define XHCI_CODE_VF_RING_FULL 16 /* VF's event ring is full */ #define XHCI_CODE_PARAMETER 17 /* Context parameter is invalid */ #define XHCI_CODE_BW_OVERRUN 18 /* TD exceeds the bandwidth */ #define XHCI_CODE_CONTEXT_STATE 19 /* Transition from illegal ctx state */ #define XHCI_CODE_NO_PING_RESP 20 /* Unable to complete periodic xfer */ #define XHCI_CODE_EV_RING_FULL 21 /* Unable to post an evt to the ring */ #define XHCI_CODE_INCOMPAT_DEV 22 /* Device cannot be accessed */ #define XHCI_CODE_MISSED_SRV 23 /* Unable to service isoc EP in ESIT */ #define XHCI_CODE_CMD_RING_STOP 24 /* Command Stop (CS) requested */ #define XHCI_CODE_CMD_ABORTED 25 /* Command Abort (CA) operation */ #define XHCI_CODE_XFER_STOPPED 26 /* xfer terminated by a stop endpoint */ #define XHCI_CODE_XFER_STOPINV 27 /* TRB transfer length invalid */ #define XHCI_CODE_XFER_SHORTPKT 28 /* Stopped before reaching end of TD */ #define XHCI_CODE_MELAT 29 /* Max Exit Latency too large */ #define XHCI_CODE_RESERVED 30 #define XHCI_CODE_ISOC_OVERRUN 31 /* IN data buffer < Max ESIT Payload */ #define XHCI_CODE_EVENT_LOST 32 /* Internal overrun - impl. specific */ #define XHCI_CODE_UNDEFINED 33 /* Fatal error - impl. specific */ #define XHCI_CODE_INVALID_SID 34 /* Invalid stream ID received */ #define XHCI_CODE_SEC_BW 35 /* Cannot alloc secondary BW Domain */ #define XHCI_CODE_SPLITERR 36 /* USB2 split transaction */ #endif /* _XHCIREG_H_ */