/*	$OpenBSD: if_re_pci.c,v 1.2 2005/06/15 23:39:19 brad Exp $	*/

/*
 * Copyright (c) 2005 Peter Valchev <pvalchev@openbsd.org>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/*
 * PCI front-end for the Realtek 8169
 */

#include <sys/param.h>
#include <sys/endian.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/socket.h>

#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>

#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#endif

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>

#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>

#include <dev/ic/rtl81x9reg.h>
#include <dev/ic/revar.h>

struct re_pci_softc {
	/* General */
	struct rl_softc sc_rl;

	/* PCI-specific data */
	void *sc_ih;
	pci_chipset_tag_t sc_pc;
	pcitag_t sc_pcitag;
};

const struct pci_matchid re_pci_devices[] = {
	{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169 },
	{ PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CGLAPCIGT },
	{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE528T },
	{ PCI_VENDOR_USR2, PCI_PRODUCT_USR2_USR997902 },
};

int re_pci_probe(struct device *, void *, void *);
void re_pci_attach(struct device *, struct device *, void *);

/*
 * PCI autoconfig definitions
 */
struct cfattach re_pci_ca = {
	sizeof(struct re_pci_softc),
	re_pci_probe,
	re_pci_attach
};

/*
 * Probe for a Realtek 8169/8110 chip. Check the PCI vendor and device
 * IDs against our list and return a device name if we find a match.
 */
int
re_pci_probe(struct device *parent, void *match, void *aux)
{
	return (pci_matchbyid((struct pci_attach_args *)aux, re_pci_devices,
	    sizeof(re_pci_devices)/sizeof(re_pci_devices[0])));
}

/*
 * PCI-specific attach routine
 */
void
re_pci_attach(struct device *parent, struct device *self, void *aux)
{
	struct re_pci_softc	*psc = (struct re_pci_softc *)self;
	struct rl_softc		*sc = &psc->sc_rl;
	struct pci_attach_args	*pa = aux;
	pci_chipset_tag_t	pc = pa->pa_pc;
	pci_intr_handle_t	ih;
	const char		*intrstr = NULL;
	bus_size_t		iosize;
	pcireg_t		command;

#ifndef BURN_BRIDGES
	/*
	 * Handle power management nonsense.
	 */

	command = pci_conf_read(pc, pa->pa_tag, RL_PCI_CAPID) & 0x000000FF;

	if (command == 0x01) {
		u_int32_t		iobase, membase, irq;

		/* Save important PCI config data. */
		iobase = pci_conf_read(pc, pa->pa_tag,  RL_PCI_LOIO);
		membase = pci_conf_read(pc, pa->pa_tag, RL_PCI_LOMEM);
		irq = pci_conf_read(pc, pa->pa_tag, RL_PCI_INTLINE);

		/* Reset the power state. */
		printf("%s: chip is is in D%d power mode "
		    "-- setting to D0\n", sc->sc_dev.dv_xname,
		    command & RL_PSTATE_MASK);
		command &= 0xFFFFFFFC;

		/* Restore PCI config data. */
		pci_conf_write(pc, pa->pa_tag, RL_PCI_LOIO, iobase);
		pci_conf_write(pc, pa->pa_tag, RL_PCI_LOMEM, membase);
		pci_conf_write(pc, pa->pa_tag, RL_PCI_INTLINE, irq);
	}
#endif

	/*
	 * Map control/status registers.
	 */
	command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
	command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE |
	    PCI_COMMAND_MASTER_ENABLE;
	pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command);
	command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);

	if ((command & (PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE)) == 0) {
		printf(": neither i/o nor mem enabled\n");
		return;
	}

	if (command & PCI_COMMAND_MEM_ENABLE) {
		if (pci_mapreg_map(pa, RL_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
		    &sc->rl_btag, &sc->rl_bhandle, NULL, &iosize, 0)) {
			printf(": can't map mem space\n");
			return;
		}
	} else {
		if (pci_mapreg_map(pa, RL_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
		    &sc->rl_btag, &sc->rl_bhandle, NULL, &iosize, 0)) {
			printf(": can't map i/o space\n");
			return;
		}
	}

	/* Allocate interrupt */
	if (pci_intr_map(pa, &ih)) {
		printf(": couldn't map interrupt\n");
		return;
	}
	intrstr = pci_intr_string(pc, ih);
	psc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, re_intr, sc,
	    sc->sc_dev.dv_xname);
	if (psc->sc_ih == NULL) {
		printf(": couldn't establish interrupt");
		if (intrstr != NULL)
			printf(" at %s", intrstr);
		return;
	}
	printf(": %s", intrstr);

	sc->sc_dmat = pa->pa_dmat;
	sc->sc_flags |= RL_ENABLED;
	sc->rl_type = RL_8169;

	/* Call bus-independent attach routine */
	re_attach_common(sc);
}