MidnightBSD Magus

Magus

security/libfprint

Library for fingerprint reader devices

Flavor Version Run OSVersion Arch License Restricted Status
1.94.8 620 4.0 amd64 lgpl2.1 0 fail

License Permissions:

Events

Machine Type Time Message
m4064b info 2025-11-01 10:17:54.257886 Test Started
m4064b fail 2025-11-01 10:19:27.238101 make test returned non-zero: 1
m4064b fail 2025-11-01 10:19:27.322555 Test complete.

Log

===>  Testing for libfprint-1.94.8
[0/1] /usr/local/bin/meson test --no-rebuild --print-errorlogs
 1/31 libfprint / virtual-image             SKIP            0.35s   exit status 77
 2/31 libfprint / aes2501                   SKIP            0.34s   exit status 77
 3/31 libfprint / aes3500                   SKIP            0.33s   exit status 77
 4/31 libfprint / elan                      SKIP            0.31s   exit status 77
 5/31 libfprint / elan-cobo                 SKIP            0.30s   exit status 77
 6/31 libfprint / elanmoc                   SKIP            0.29s   exit status 77
 7/31 libfprint / elanspi                   SKIP            0.28s   exit status 77
 8/31 libfprint / synaptics                 SKIP            0.27s   exit status 77
 9/31 libfprint / upektc_img                SKIP            0.25s   exit status 77
10/31 libfprint / upektc_img-tcs1s          SKIP            0.24s   exit status 77
11/31 libfprint / uru4000-msv2              SKIP            0.23s   exit status 77
12/31 libfprint / uru4000-4500              SKIP            0.21s   exit status 77
13/31 libfprint / vfs0050                   SKIP            0.20s   exit status 77
14/31 libfprint / vfs301                    SKIP            0.19s   exit status 77
15/31 libfprint / vfs5011                   SKIP            0.17s   exit status 77
16/31 libfprint / vfs7552                   SKIP            0.16s   exit status 77
17/31 libfprint / goodixmoc                 SKIP            0.15s   exit status 77
18/31 libfprint / nb1010                    SKIP            0.13s   exit status 77
19/31 libfprint / egis0570                  SKIP            0.12s   exit status 77
20/31 libfprint / egismoc                   SKIP            0.11s   exit status 77
21/31 libfprint / egismoc-05a1              SKIP            0.09s   exit status 77
22/31 libfprint / egismoc-0586              SKIP            0.08s   exit status 77
23/31 libfprint / egismoc-0587              SKIP            0.06s   exit status 77
24/31 libfprint / fpcmoc                    SKIP            0.05s   exit status 77
25/31 libfprint / realtek                   SKIP            0.11s   exit status 77
26/31 libfprint / realtek-5816              SKIP            0.09s   exit status 77
27/31 libfprint / focaltech_moc             SKIP            0.08s   exit status 77
28/31 libfprint:unit-tests / fpi-assembling SKIP            0.04s   exit status 77
29/31 libfprint / udev-hwdb                 OK              0.04s
30/31 libfprint:unit-tests / fpi-ssm        OK              1.19s
31/31 libfprint:unit-tests / fpi-device     FAIL            4.95s   killed by signal 6 SIGABRT
>>> G_TEST_SRCDIR=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/tests G_TEST_BUILDDIR=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build/tests MESON_BUILD_ROOT=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build MESON_SOURCE_ROOT=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8 LD_LIBRARY_PATH=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build/libfprint:/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build/libfprint MSAN_OPTIONS=halt_on_error=1:abort_on_error=1:print_summary=1:print_stacktrace=1 FP_DEVICE_EMULATION=1 ASAN_OPTIONS=halt_on_error=1:abort_on_error=1:print_summary=1 MESON_TEST_ITERATION=1 UBSAN_OPTIONS=halt_on_error=1:abort_on_error=1:print_summary=1:print_stacktrace=1 G_MESSAGES_DEBUG=all MALLOC_PERTURB_=131 FP_DRIVERS_ALLOWLIST=virtual_image:virtual_device:virtual_device_storage UDEV_HWDB=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build/libfprint/fprint-list-udev-hwdb NO_AT_BRIDGE=1 UDEV_HWDB_CHECK_CONTENTS=1 G_DEBUG=fatal-warnings FP_PRINTS_PATH=/magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/examples/prints /magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build/tests/test-fpi-device
――――――――――――――――――――――――――――――――――――― ✀  ―――――――――――――――――――――――――――――――――――――
Listing only the last 100 lines from a long log.
# libfprint-device-DEBUG: Device reported close completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_CLOSE in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_WARM -> FP_TEMPERATURE_WARM
ok 73 /driver/identify/report_no_cb
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_open: Device Virtual device for debugging in action FPI_DEVICE_ACTION_OPEN
# 
# libfprint-device-DEBUG: Device reported open completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_OPEN in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 1 -> 1, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_suspend: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_resume: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_identify: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-device-DEBUG: Device reported identify result
# libfprint-device-DEBUG: Device reported identify completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_IDENTIFY in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.04 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_WARM
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_close: Device Virtual device for debugging in action FPI_DEVICE_ACTION_CLOSE
# 
# libfprint-device-DEBUG: Device reported close completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_CLOSE in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_WARM -> FP_TEMPERATURE_WARM
ok 74 /driver/identify/suspend_continues
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_open: Device Virtual device for debugging in action FPI_DEVICE_ACTION_OPEN
# 
# libfprint-device-DEBUG: Device reported open completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_OPEN in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 1 -> 1, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_suspend: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_identify: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-device-DEBUG: Device reported identify result
# libfprint-device-DEBUG: Device reported identify completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_IDENTIFY in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.04 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_WARM
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_close: Device Virtual device for debugging in action FPI_DEVICE_ACTION_CLOSE
# 
# libfprint-device-DEBUG: Device reported close completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_CLOSE in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_WARM -> FP_TEMPERATURE_WARM
ok 75 /driver/identify/suspend_succeeds
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_open: Device Virtual device for debugging in action FPI_DEVICE_ACTION_OPEN
# 
# libfprint-device-DEBUG: Device reported open completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_OPEN in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 1 -> 1, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_suspend: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_identify: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-device-DEBUG: Device reported identify completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_IDENTIFY in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_WARM
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_close: Device Virtual device for debugging in action FPI_DEVICE_ACTION_CLOSE
# 
# libfprint-device-DEBUG: Device reported close completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_CLOSE in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_WARM -> FP_TEMPERATURE_WARM
ok 76 /driver/identify/suspend_busy_error
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_open: Device Virtual device for debugging in action FPI_DEVICE_ACTION_OPEN
# 
# libfprint-device-DEBUG: Device reported open completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_OPEN in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_close: Device Virtual device for debugging in action FPI_DEVICE_ACTION_CLOSE
# 
# libfprint-device-DEBUG: Device reported close completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_CLOSE in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
ok 77 /driver/identify/suspend_while_idle
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_open: Device Virtual device for debugging in action FPI_DEVICE_ACTION_OPEN
# 
# libfprint-device-DEBUG: Device reported open completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_OPEN in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 0 -> 0, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.27 -> 0.27, active 1 -> 1, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_COLD
# libfprint-device-DEBUG: Updated temperature model after 0.11 seconds, ratio 0.27 -> 0.31, active 1 -> 1, FP_TEMPERATURE_COLD -> FP_TEMPERATURE_WARM
# libfprint-device-DEBUG: Updated temperature model after 2.13 seconds, ratio 0.31 -> 0.76, active 1 -> 1, FP_TEMPERATURE_WARM -> FP_TEMPERATURE_HOT
# libfprint-device-DEBUG: Idle cancelling on ongoing operation!
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_cancel: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-fake_test_dev-DEBUG: fpi_device_fake_identify: Device Virtual device for debugging in action FPI_DEVICE_ACTION_IDENTIFY
# 
# libfprint-device-DEBUG: Device reported identify completion
# libfprint-device-DEBUG: Completing action FPI_DEVICE_ACTION_IDENTIFY in idle!
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.76 -> 0.76, active 0 -> 0, FP_TEMPERATURE_HOT -> FP_TEMPERATURE_HOT
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.76 -> 0.76, active 1 -> 1, FP_TEMPERATURE_HOT -> FP_TEMPERATURE_HOT
# libfprint-device-DEBUG: Updated temperature model after 0.00 seconds, ratio 0.76 -> 0.76, active 0 -> 0, FP_TEMPERATURE_HOT -> FP_TEMPERATURE_HOT
# libfprint-device-DEBUG: Updated temperature model after 2.35 seconds, ratio 0.76 -> 0.48, active 0 -> 0, FP_TEMPERATURE_HOT -> FP_TEMPERATURE_WARM
not ok /driver/identify/warmup_cooldown - libfprint-device:ERROR:../tests/test-fpi-device.c:2407:test_driver_identify_warmup_cooldown: assertion failed (g_get_monotonic_time () - start_time < 2000000 + 250000): (2353291 < 2250000)
Bail out!
stderr:
**
libfprint-device:ERROR:../tests/test-fpi-device.c:2407:test_driver_identify_warmup_cooldown: assertion failed (g_get_monotonic_time () - start_time < 2000000 + 250000): (2353291 < 2250000)
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――


Summary of Failures:

31/31 libfprint:unit-tests / fpi-device     FAIL            4.95s   killed by signal 6 SIGABRT

Ok:                 2   
Expected Fail:      0   
Fail:               1   
Unexpected Pass:    0   
Skipped:            28  
Timeout:            0   

Full log written to /magus/work/usr/mports/security/libfprint/work/libfprint-v1.94.8/_build/meson-logs/testlog.txt
FAILED: meson-internal__test 
/usr/local/bin/meson test --no-rebuild --print-errorlogs
ninja: build stopped: subcommand failed.
*** Error code 1

Stop.
make: stopped in /usr/mports/security/libfprint

Links

Depends On

Depend Of

Categories

CVEs

  • Loading CVE information...

LLM Analysis