SH6(1)

NAME
sh6 - shell (command interpreter)

SYNOPSIS
sh6 [- | -c [string] | -t | file [arg1 ...]]

DESCRIPTION
Sh6 is a port of the standard command interpreter from Sixth Edition UNIX. It may be used either as an interactive shell or as a non-interactive shell. Throughout this manual, `(+)' indicates those cases where sh6 is known to differ from the original sh(1), as it appeared in Sixth Edition UNIX.

The options are as follows:

-   The shell reads and executes command lines from the standard input until end-of-file or exit.

-c [string]
    If a string is specified, the shell executes it as a command line and exits. Otherwise, the shell treats it as the - option.

-t  The shell reads a single line from the standard input, executes it as a command line, and exits.

The shell may also be invoked non-interactively to read, interpret, and execute an ASCII command file. The specified file and any arguments are treated as positional parameters (see Parameter substitution below) during execution of the command file.

Otherwise, if no arguments are specified and if both the standard input and standard error are connected to a terminal, the shell is interactive. An interactive shell prompts the user with a `% ' (or `# ' for the superuser) before reading each command line from the terminal.

  Metacharacters
A syntactic metacharacter is any one of the following:

    | ^ ; & ( ) < > space tab

When such a character is unquoted, it has special meaning to the shell. The shell uses it to separate words (see Commands and Command lines below). A quoting metacharacter is any one of the following:

    " ' \

See Quoting below. The substitution metacharacter is a:

    $

See Parameter substitution below. Finally, a pattern metacharacter is any one of the following:

    * ? [

See File name generation below.

  Commands
Each command is a sequence of non-blank command arguments, or words, separated by one or more blanks (spaces or tabs). The first argument specifies the name of a command to be executed. Except for certain special arguments described below, the arguments other than the command name are passed without interpretation to the invoked command.

If the first argument names a special command, the shell executes it (see Special commands below). Otherwise, the shell treats it as an external command, which is located as follows.

(+) If the command name contains no `/' characters, the sequence of directories in the environment variable PATH is searched for the first occurrence of an executable file by that name, which the shell attempts to execute. However, if the command name contains one or more `/' characters, the shell attempts to execute it without performing any PATH search.

(+) If an executable file does not begin with the proper magic number or a `#!shell' sequence, it is assumed to be an ASCII command file, and a new shell is automatically invoked to execute it. The environment variable EXECSHELL specifies the shell which is invoked to execute such a file.

If a command cannot be found or executed, a diagnostic is printed.

  Command lines
Commands separated by | or ^ constitute a chain of filters, or a pipeline. The standard output of each command but the last is taken as the standard input of the next command. Each command is run as a separate process, connected by pipes (see pipe(2)) to its neighbors.

A command line, or list, consists of one or more pipelines separated, and perhaps terminated by ; or &. The semicolon designates sequential execution. The ampersand designates asynchronous execution, which causes the preceding pipeline to be executed without waiting for it to finish. The process ID of each command in such a pipeline is reported, so that it may be used if necessary for a subsequent kill(1).

A list contained within parentheses such as ( list ) is executed in a subshell and may appear in place of a simple command as a filter.

If a command line is syntactically incorrect, a diagnostic is printed.

  Termination reporting
All terminations other than exit and interrupt are considered to be abnormal. If a sequential process terminates abnormally, a message is printed. The termination report for an asynchronous process is given upon execution of the first sequential command subsequent to its termination, or when the wait special command is executed. The following is a list of the possible termination messages:

	Hangup
	Quit
	Illegal instruction
	Trace/BPT trap
	IOT trap
	EMT trap
	Floating exception
	Killed
	Bus error
	Memory fault
	Bad system call

For an asynchronous process, its process ID is prepended to the appropriate message. If a core image is produced, ` -- Core dumped' is appended to the appropriate message.

  I/O redirection
Each of the following argument forms is interpreted as a redirection by the shell itself. Such a redirection may appear anywhere among the arguments of a simple command, or before or after a parenthesized command list, and is associated with that command or command list.

A redirection of the form <arg causes the file arg to be used as the standard input (file descriptor 0) for the associated command.

A redirection of the form >arg causes the file arg to be used as the standard output (file descriptor 1) for the associated command. If arg does not already exist, it is created; otherwise, it is truncated at the outset.

A redirection of the form >>arg is the same as >arg, except if arg already exists the command output is always appended to the end of the file.

For example, either of the following command lines:

	% date >.dirlist ; pwd >>.dirlist ; ls -l >>.dirlist
	% ( date ; pwd ; ls -l ) >.dirlist

creates on the file `.dirlist', the current date and time, followed by the name and a long listing of the current working directory.

A >arg or >>arg redirection associated with any but the last command of a pipeline is ineffectual, as is a <arg redirection with any but the first.

The standard error (file descriptor 2) is never subject to redirection by the shell itself. Thus, commands may write diagnostics to a location where they have a chance to be seen. However, fd2(1) provides a way to redirect the diagnostic output to another location.

If the file for a redirection cannot be opened or created, a diagnostic is printed.

  Quoting
The shell treats all quoted characters literally, including characters which have special meaning to the shell (see Metacharacters above). If such characters are quoted, they represent themselves and may be passed as part of arguments.

Individual characters, and sequences of characters, are quoted when enclosed by a matched pair of double (") or single (') quotes. For example:

	% awk '{ print NR "\t" $0 }' README ^ more

causes awk(1) to write each line from the `README' file, preceded by its line number and a tab, to the standard output which is piped to more(1) for viewing. The outer single quotes prevent the shell from trying to interpret any part of the string, which is then passed as a single argument to awk.

An individual backslash (\) quotes, or escapes, the next individual character. A backslash followed by a newline is a special case which allows continuation of command-line input onto the next line. Each backslash-newline sequence in the input is translated into a blank.

If a double or single quote appears but is not part of a matched pair, a diagnostic is printed.

  Parameter substitution
When the shell is invoked as a non-interactive command, it has additional string processing capabilities which are not available when it is interactive. A non-interactive shell may be invoked as follows:

	sh6 name [arg1 ...]

If the first character of name is not -, it is taken as the name of an ASCII command file, or shell script, which is opened as the standard input for a new shell instance. Thus, the new shell reads and interprets command lines from the named file.

Otherwise, name is taken as one of the shell options, and a new shell instance is invoked to read and interpret command lines from its standard input. However, notice that the -c option followed by a string is the one case where the shell does not read and interpret command lines from its standard input. Instead, the string itself is taken as a command line and executed.

In each command line, an unquoted character sequence of the form $N, where N is a digit, is treated as a positional parameter by the shell. Each occurrence of a positional parameter in the command line is substituted with the value of the Nth argument to the invocation of the shell (argN). $0 is substituted with name.

In both interactive and non-interactive shells, $$ is substituted with the process ID of the current shell. The value is represented as a 5-digit ASCII string, padded on the left with zeros when the process ID is less than 10000.

All substitution on a command line is performed before the line is interpreted. Thus, no action which alters the value of any parameter can have any effect on a reference to that parameter occurring on the same line.

A positional-parameter value may contain any number of metacharacters. Each one which is unquoted, or unescaped, within a positional-parameter value retains its special meaning when the value is substituted in a command line by the invoked shell.

Take the following two shell invocations for example:

	% sh6 -c '$1' 'echo Hello World! >/dev/null'
	% sh6 -c '$1' 'echo Hello World! \>/dev/null'
	Hello World! >/dev/null

In the first invocation, the > in the value substituted by $1 retains its special meaning. This causes all output from echo(1) to be redirected to /dev/null. However, in the second invocation, the meaning of > is escaped by \ in the value substituted by $1. This causes the shell to pass `>/dev/null' as a single argument to echo instead of interpreting it as a redirection.

  File name generation
Prior to executing an external command, the shell scans each argument for unquoted *, ?, or [ characters. If one or more of these characters appears, the argument is treated as a pattern, and the shell uses glob6(1) to search for file names which match it. Otherwise, the argument is used as is.

The meaning of each pattern character is as follows:

o   The * character in a pattern matches any string of characters in a file name (including the null string).

o   The ? character in a pattern matches any single character in a file name.

o   The [...] brackets in a pattern specifies a class of characters which matches any single file-name character in the class. Within the brackets, each character is taken to be a member of the class. A pair of characters separated by an unquoted - specifies the class as a range which matches each character lexically between the first and second member of the pair, inclusive. A - matches itself when quoted or when first or last in the class.

Any other character in a pattern matches itself in a file name.

Notice that the `.' character at the beginning of a file name, or immediately following a `/', is always special in that it must be matched explicitly. The same is true of the `/' character itself.

If the pattern contains no `/' characters, the current directory is always used. Otherwise, the specified directory is the one obtained by taking the pattern up to the last `/' before the first unquoted *, ?, or [. The matching process matches the remainder of the pattern after this `/' against the files in the specified directory.

In any event, a list of file names is obtained from the current (or specified) directory which match the given pattern. This list is sorted in ascending ASCII order, and the new sequence of arguments replaces the given pattern. The same process is carried out for each of the given pattern arguments; the resulting lists are not merged. Finally, the shell attempts to execute the command with the resulting argument list.

If a pattern argument refers to a directory which cannot be opened, a `No directory' diagnostic is printed.

If a command has only one pattern argument, a `No match' diagnostic is printed if it fails to match any files. However, if a command has more than one pattern argument, a diagnostic is printed only when they all fail to match any files. Otherwise, each pattern argument failing to match any files is removed from the argument list.

  End of file
An end-of-file in the shell's input causes it to exit. If the shell is interactive, this means it exits by default when the user types an EOT (^D) at the prompt. If desired, the user may change or disable the end-of-file character with stty(1).

  Special commands
The following commands are special in that they are executed by the shell without creating a new process.

: [arg ...]
    Does nothing and sets the exit status to zero.

chdir dir [...]
    Changes the shell's current working directory to dir.

exit
    Causes the shell to cease execution of a file. This means exit has no effect at the prompt of an interactive shell.

login [arg ...]
    Replaces the current interactive shell with login(1).

newgrp [arg ...]
    Replaces the current interactive shell with newgrp(1).

shift
    Shifts all positional-parameter values to the left by 1, so that the old value of $2 becomes the new value of $1 and so forth. The value of $0 does not shift.

wait
    Waits for all asynchronous processes to terminate, reporting on abnormal terminations.

  Signals (+)
If the shell is interactive, it ignores the SIGINT, SIGQUIT, and SIGTERM signals (see signal(3)). However, if the shell is invoked with any option argument, it only ignores SIGINT and SIGQUIT.

If SIGINT, SIGQUIT, or SIGTERM is already ignored when the shell starts, it is also ignored by the current shell and all of its child processes. Otherwise, SIGINT and SIGQUIT are reset to the default action for sequential child processes, whereas SIGTERM is reset to the default action for all child processes.

For any signal not mentioned above, the shell inherits the signal action (default or ignore) from its parent process and passes it to its child processes.

Asynchronous child processes always ignore both SIGINT and SIGQUIT. Also, if such a process has not redirected its input with a <, |, or ^, the shell automatically redirects it to come from /dev/null.

EXIT STATUS (+)
The exit status of the shell is generally that of the last command executed prior to end-of-file or exit.

However, if the shell is interactive and detects an error, it exits with a non-zero status if the user types an EOT at the next prompt.

Otherwise, if the shell is non-interactive and is reading commands from a file, any shell-detected error causes the shell to cease execution of that file. This results in a non-zero exit status.

A non-zero exit status returned by the shell itself is always one of the values described in the following list, each of which may be accompanied by an appropriate diagnostic:

2   The shell detected a syntax, redirection, or other error not described in this list.

125 An external command was found but did not begin with the proper magic number or a `#!shell' sequence, and a valid shell was not specified by EXECSHELL with which to execute it.

126 An external command was found but could not be executed.

127 An external command was not found.

>128
    An external command was terminated by a signal.

ENVIRONMENT (+)
Notice that the concept of `user environment' was not defined in Sixth Edition UNIX. Thus, use of the following environment variables by this port of the shell is an enhancement:

EXECSHELL
    If set to a non-empty string, the value of this variable is taken as the path name of the shell which is invoked to execute an external command when it does not begin with the proper magic number or a `#!shell' sequence.

PATH
    If set to a non-empty string, the value of this variable is taken as the sequence of directories used by the shell to search for external commands. Notice that the Sixth Edition UNIX shell always used the equivalent of `.:/bin:/usr/bin', not PATH.

FILES

/dev/null
    default source of input for asynchronous processes

SEE ALSO
awk(1), echo(1), env(1), expr(1), fd2(1), glob6(1), goto(1), grep(1), if(1), kill(1), login(1), newgrp(1), osh(1), stty(1)

Osh home page: http://v6shell.org/

`The UNIX Time-Sharing System' (CACM, July, 1974):

	http://v6shell.org/history/unix/

gives the theory of operation of both the system and the shell.

AUTHORS
This port of the Thompson shell is derived from Sixth Edition UNIX /usr/source/s2/sh.c, which was principally written by Ken Thompson of Bell Labs. Jeffrey Allen Neitzel initially ported it in January 2004 and currently maintains it as sh6(1).

HISTORY
A sh command appeared as /bin/sh in First Edition UNIX.

The Thompson shell was used as the standard command interpreter through Sixth Edition UNIX. Then, in the Seventh Edition, it was replaced by the Bourne shell. However, the Thompson shell was still distributed with the system as osh because of known portability problems with the Bourne shell's memory management in Seventh Edition UNIX.

LICENSE
See either the `LICENSE' file which is distributed with osh or http://v6shell.org/license/ for full details.

COPYRIGHT
Copyright (c) 2003-2012
	Jeffrey Allen Neitzel.  All rights reserved.
Copyright (c) 2001-2002
	Caldera International Inc.  All rights reserved.
Copyright (c) 1985, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.

NOTES
Since sh6 does not read any startup files, it should not be added to the shell database (see shells(5)) unless the system administrator is willing to deal with this fact.

Sh6 has no facilities for setting, unsetting, or otherwise manipulating environment variables within the shell. This must be accomplished by using other tools such as env(1).

Like the original, sh6 is not 8-bit clean as it uses the high-order bit of characters for quoting. Thus, the only complete character set it can handle is 7-bit ASCII.

Notice that certain shell oddities were historically undocumented in this manual page. Particularly noteworthy is the fact that there is no such thing as a usage error. Thus, the following shell invocations are perfectly valid:

	sh6 -cats_are_nice!!! ': "Good kitty =)"'
	sh6 -tabbies_are_too!
	sh6 -s

The first two cases correspond to the -c and -t options respectively; the third case corresponds to the - option.

SECURITY
This port of the Thompson shell does not support set-ID execution. If the effective user (group) ID of the shell process is not equal to its real user (group) ID, the shell prints a diagnostic and exits with a non-zero status.

However, if the shell did support set-ID execution, it could possibly allow a user to violate the security policy on a host where the shell is used. For example, if the shell were running a setuid-root command file, a regular user could possibly invoke an interactive root shell as a result.

This is not a bug. It is a fact of how the shell works. Thus, sh6 does not support set-ID execution.

BUGS
The shell makes no attempt to recover from read(2) errors and exits if this system call fails for any reason.