ADMESH(1)

NAME
ADMesh - a program for processing triangulated solid meshes

SYNOPSIS
admesh [OPTION]... file

DESCRIPTION
ADMesh is a program for processing triangulated solid meshes. Currently, ADMesh only reads the STL file format that is used for rapid prototyping applications, although it can write STL, VRML, OFF, and DXF files. By default, ADMesh performs all of the mesh checking and repairing options on the input file. This means that is checks exact, nearby, remove-unconnected, fill-holes, normal-directions, and normal-values. The file type (ASCII or binary) is automatically detected. The input file is not modified unless it is specified by the --write option. If the following command line was input: admesh sphere.stl The file sphere.stl would be opened and read, it would be checked and fixed if necessary, and the results of processing would be printed out. The results would not be saved. The default value for tolerance is the length of the shortest edge of the mesh. The default number of iterations is 2, and the default increment is 0.01% of the diameter of a sphere that encloses the entire mesh. If any of the options --exact, --nearby, --remove-unconnected, --fill-holes, --normal-directions, --reverse-all, --normal-values, or --no-check are given, then no other checks besides that one will be done unless they are specified or unless they are required by ADMesh before the specified check can be done. For example the following command line: admesh --remove-unconnected sphere.stl would first do an exact check because it is required, and then the unconnected facets would be removed. The results would be printed and no other checks would be done.

OPTIONS

--x-rotate=angle
    Rotate CCW about x-axis by angle degrees

--y-rotate=angle
    Rotate CCW about y-axis by angle degrees

--z-rotate=angle
    Rotate CCW about z-axis by angle degrees

--xy-mirror
    Mirror about the xy plane

--yz-mirror
    Mirror about the yz plane

--xz-mirror
    Mirror about the xz plane

--scale=factor
    Scale the file by factor (multiply by factor)

--translate=x,y,z
    Translate the file to x, y, and z

--merge=name
    Merge file called name with input file

-e, --exact
    Only check for perfectly matched edges

-n, --nearby
    Find and connect nearby facets. Correct bad facets

-t, --tolerance=tol
    Initial tolerance to use for nearby check = tol

-i, --iterations=i
    Number of iterations for nearby check = i

-m, --increment=inc
    Amount to increment tolerance after iteration=inc

-u, --remove-unconnected Remove facets that have 0 neighbors

-f, --fill-holes
    Add facets to fill holes

-d, --normal-directions
    Check and fix direction of normals(ie cw, ccw)

--reverse-all
    Reverse the directions of all facets and normals

-v, --normal-values
    Check and fix normal values

-c, --no-check
    Don't do any check on input file

-b, --write-binary-stl=name
    Output a binary STL file called name

-a, --write-ascii-stl=name
    Output an ascii STL file called name

--write-off=name
    Output a Geomview OFF format file called name

--write-dxf=name
    Output a DXF format file called name

--write-vrml=name
    Output a VRML format file called name

--help
    Display this help and exit

--version
    Output version information and exit

The functions are executed in the same order as the options shown here. So check here to find what happens if, for example, --translate and --merge options are specified together. The order of the options specified on the command line is not important.

EXAMPLES
To perform all checks except for nearby, the following command line would be used: admesh --exact --remove-unconnected --fill-holes --normal-directions --normal-values sphere.stl Actually, since the exact check is required by ADMesh before remove-unconnected, and remove-unconnected is required before --fill-holes, the above command line could be shortened as follows with the same results: admesh --fill-holes --normal-directions --normal-values sphere.stl And again the same results could be achieved using the short options: admesh -fudev sphere.stl or admesh -fdv sphere.stl

The following command lines do the same thing: admesh sphere.stl admesh -fundev sphere.stl admesh -f -u -n -d -e -v sphere.stl since the -fundev options are implied by default. To eliminate one of the checks, just remove the letter of the check to eliminate from the "word" fundev.

SEE ALSO
For more information about the options and output read admesh-doc.txt - it is usually located in /usr/share/doc/admesh-x.xx dir.

COPYRIGHT
Copyright (C) 1995, 1996 Anthony D. Martin <amartin@engr.csulb.edu> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.