v4l-utils-0.9.5
---------------

Gregor Jasny (1):
      contrib: Add missing dist files for ioctl-test

v4l-utils-0.9.4
---------------

André Roth (3):
      libv4l-mplane: Fix compile flags to allow anonymous unions with gcc 4.5.5
      libdvbv5: fix compile error
      libdvbv5: fix anonymous unions on older gcc

Antonio Ospite (2):
      contrib/m920x/m920x_parse.pl: stricter check when extracting firmware
      contrib/m920x/m920x_parse.pl: silence a warning

Gregor Jasny (4):
      libv4l: Add ASUS F2F with STK DC-1125 to upside down list
      libv4l: Add Founder PC T14MF to upside down table
      contrib: Add missing files to distribution list

Hans Petter Selasky (1):
      libv4l: Don't try to access sysfs 256 times when there is no sysfs

Hans Verkuil (52):
      qv4l2: add missing information for string and integer controls
      qv4l2: add support for control events.
      v4l2-compliance: allow EINVAL to be returned by S/TRY_FMT.
      qv4l2: fix setting frequency for radio modulators
      v4l-utils: sync with latest kernel.
      v4l2-ctl: show used timestamp type.
      v4l2-compliance: add check whether the timestamp is monotonic.
      v4l-utils: fix make install problems with ln -s
      v4l-utils: fix two 'dereferencing type-punned pointer' warnings
      v4l2-compliance: reorganize verbosity options
      ioctl-test: improve comments and add checks against ioctl num changes.
      v4l2-compliance: improve read/write error reporting.
      qv4l2: don't show "Query Standard" button if QUERYSTD isn't supported.
      qv4l2: correctly update frame width and height for fixed resolutions.
      v4l2-ctl: improve interval reporting.
      v4l2-ctl: when streaming to file use bytesused instead of the full buffer.
      v4l2-ctl: improve dv_timings reporting.
      v4l2-ctl: support data_offset when streaming multiplanar formats.
      v4l2-ctl: show buffers or key/P/B-frames when capturing.
      v4l2-* utils: allow -d11 to refer to /dev/video11
      v4l-utils: run sync-with-kernel.
      v4l2-ctl: add support for 'COPY' timestamp and ctrl range events.
      v4l2-compliance: add support for the new 'COPY' timestamp type.
      v4l2-compliance: missing check on the frameinterval
      v4l2-compliance: improve tests when TRY/S_FMT returns EINVAL.
      qv4l2: do nothing if querystd does not detect a standard.
      qv4l2: handle control range updates.
      libv4l2/log.c: update list of ioctls.
      v4l2-compliance: fix s_std test: ENODATA is a valid error code.
      v4l2-ctl: don't produce verbose output for QBUF while streaming.
      qv4l2: fix the way interlaced formats are displayed
      v4l2-ctl: fix the field-per-second calculation
      qv4l2/v4l2-ctl: fix the fields-per-second calculation
      qv4l2/v4l2-ctl: fix rounding error in field-per-second calculation
      v4l2-ctl: add the --concise option.
      v4l-utils: sync with kernel, remove all references to the DV_PRESET API.
      v4l-utils: sync to the latest kernel.
      v4l-utils: sync-with-kernel.
      v4l2-compliance: remove ChipIdent tests
      v4l2-ctl: set bytesused for streaming to the output.
      v4l2-compliance: fix RDS + CAP_READWRITE tests.
      v4l2-compliance: really fix the RDS and V4L2_CAP_READWRITE tests
      v4l2-ctl: add eos and decoder-stop support.
      v4l2-ctl: use references instead of pointers.
      v4l2-ctl: fix a small bug in the stream-count/skip handling.
      v4l2-ctl: split off test pattern generation in a separate source.
      v4l2-ctl: small improvements.
      v4l2-ctl: poll/non-poll behavior fixes
      v4l2-ctl: find_pixel_format couldn't handle output streams.
      v4l-utils: sync with latest kernel.
      v4l2-dbg: replace CHIP_IDENT with CHIP_INFO.
      v4l2-ctl: introduce buffers class to simplify the streaming code

Jean Delvare (1):
      dvbv5-zap: Fix build warning

Laurent Pinchart (2):
      v4l2-compliance: Print invalid return codes in control tests
      v4l2-compliance: Print invalid error_idx values in control tests

Mauro Carvalho Chehab (50):
      ir-keytable: Add support for testing EV_ABS events
      keytable: merge two identical structures into one
      keytable: reorder functions to put similar code together
      keytable: Add handler for EV_REL type
      keytable: also print code for unknown/unhandled events
      keytable: Put events in numeric order
      keytable: Add the remaining other unhandled events
      keytable: Make the parsing code more generic
      keytable: properly print the other MSC_* event names
      keytable: be clear when a value is in hexadecimal
      keytable: always use hexadecimal values for scancodes
      dvbv5-zap: Allow to enable FE debug
      Sync with kernel, with DVB stats
      dvb-fe: add support for DVBv5 stats
      dvbv5-zap: use the new DVBv5 stats API
      dvb-fe: Add a flag to indicate if DVBv5 stats is in use
      dvb-fe: Improve BER measurements for DVBv5
      dvb-fe: Allow returning BER in a float value
      dvbv5-zap: better display BER
      dvb-fe: Add a method to report PER
      dvb: Move the core of the stats logic to dvb-fe
      dvb-fe: Fix PER statistics measurement
      dvb-fe: Add support for a quality measurement
      dvb: Rename a few DVB statistics
      dvb: Add support for retrieving pre-BER data
      dvb: use a macro for the number of Kernel stats
      dvb: Better name the post-BER data
      dvb: add support for pre-BER measurement
      dvb: if the signal vanishes, bit/block error counters should vanish
      dvbv5-zap: improve status display
      dvbv5-scan: use library support for stats print
      dvbv5-scan: also prints signal strength on tuner fail
      ioctl-test: Auto-generate the list of ioctls to test
      Add DVB headers to make sync-with-kernel
      ioctl-test: expand it to also test DVB frontend/demux
      dvbv5-scan: Fix get_signal logic
      dvb-fe: Fix check for stats property
      dvb-fe: Reserve space for the other DVBv5 properties
      dvbv5-zap: Only go back if is there anything to clean
      dvb5-scan: Improve output to better show the status
      dvbv5-scan: don't be too verbose with status
      dvb-scan: Don't call dvb_fe_get_stats() twice
      dvb-fe: Supress statistics if signal lock vanishes
      dvbv5-scan: timeout-multiply should also affect the timeout for scan
      dvbv5-zap: add traffic monitor support
      dvbv5-zap: output stats to stdout on monitor mode
      dvbv5-zap: Better output at monitor mode
      dvbv5-zap: don't stop monitoring for buffer underrun
      dvbv5-zap: better represent low_traffic data in monitor mode
      dvbv5-zap: print elapsed time when buffer overflow happens

Riku Voipio (1):
      v4l-utils: use openat when available

Tzu-Jung Lee (2):
      v4l2-ctl: break down the streaming_set()
      v4l2-ctl: initial attempt to support M2M device streaming

v4l-utils-0.9.3
---------------
* Synced with latest kernel headers

* v4l2-ctl changes
  * fixed bug in parse_subopt
  * --list-buffers didn't work for multiplanar formats

* v4l2-compliance
  * work around missing ENODATA on (k)FreeBSD
  * add test whether V4L2_MEMORY_DMABUF is supported
  * add the new EXPBUF ioctl

v4l-utils-0.9.2
---------------
* libv4l changes
  * Add a libv4l plugin for mplane handling

* v4l2-ctl changes
  * load initial frames from the file as well
  * add --stream-loop for streaming to an output
  * zero bytesperline

* test utility changes
  * Add an OpenGL test application to test utilities in contrib

* buildsystem changes
  * Use udev pkgconfig file to populate installation directory
  * Query Qt rcc tool location and fall back to rcc if not available

v4l-utils-0.9.1
---------------
* libv4l changes
  * Various Pixart JPEG fixes
  * Add more notebooks to the upside down device table
  * Use bytesperline instead of width (Robert Abel)
  * Better luminance quantization table for Pixart JPEG (Jean-Francois Moine)
  * Fix out of bounds array usage
  * Prevent GCC 4.7 inlining error
  * Add support for libjpeg >= v7
  * Add new matching algorithm for upside down table
  * Retry with another frame on JPEG header decode errors
  * Improved JL2005BCD support (Theodore Kilgore)
  * Set errno to EIO if getting 4 consecutive EAGAIN convert errors
  * Make software autowhitebalance converge faster
  * Add quirk support for forced tinyjpeg fallback

* ir-keytable changes
  * Fixed file parsing errors
  * Add support for Sanyo IR and RC-5-SZ protocol
  * Add missing mouse buttons in shipped keytables

* libdvbv5 changes
  * Initial release

* libv4l2rds and rds-ctl
  * Initial release (Konke Radlow)

* qv4l2 changes
  * Fix segfault when there are no inputs or outputs
  * Fix endianess issues
  * Add support for new timing ioctls
  * Improve frequency and radio support
  * Add VBI support
  * Add ability to make a snapshot
  * Add support to stream raw frames into a file

* buildsystem changes
  * Converted buildsystem to autotools
  * Made buildsystem cross compiling friendly
  * Support out of tree builds

v4l-utils-0.8.5
---------------
* Utils changes
  * parse_em28xx_drxk.pl: New parser for dumps of em28xx with drxk frontend
    (mchehab)
  * qv4l2: Add support for bitmap controls (hverkuil)
  * v4l2-ctl: add support for the new bitmask control type (hverkuil)
  * v4l2-ctl: add support for the control event (hverkuil)
  * v4l2-ctl: small bugfixes (hverkuil)
  * v4l2-compliance: various new tests (hverkuil)
  * lib_media_dev: various fixes / cleanups (hdegoede)
* libv4l changes
  * Add some more laptop models to the upside down devices table (hdegoede)
  * Add support for SE401 pixelformat (hdegoede)
  * Software autogain tweaks (hdegoede)

v4l-utils-0.8.4
---------------
* Utils changes
  * Various small fixes (hverkuil, mchehab)
  * qv4l2: Add support for configuring the framerate for devices which support
    this like uvc cams (hdegoede)
  * parse_tcpdump_log.pl: new parser for tcpdump / wireshark made usbmon
    dumps (mchehab)
  * New lib_media_dev lib, to pair audio devices with video devices
    (and other combinations) for now this lives in utils and does not get
    installed systemwide, as the API is not stable (mchehab)
* libv4l changes
  * Add many more laptop models to the upside down devices table (hdegoede)
  * Some small bugfixes (hdegoede)
  * Add vicam cameras to list of cameras need sw auto gain + whitebalance
    (hdegoede)
  * Add support for M420 pixelformat (hdegoede)
  * Add support for Y10B pixelformat (Antonio Ospite)
  * Add support for JPGL pixelformat (jfmoine)
  * Modified (rewrote) jpeg decompression code to use libjpeg[-turbo], for
    much lower cpu load when doing jpeg decompression (hdegoede)
  * Detect usb connection speed of devices (hdegoede)
  * Rewrite src format selection algorithm, taking bandwidth into account and
    choosing the format which will give us the lowest CPU load while still
    allowing 30 fps (hdegoede)
  * Intercept S_PARM and redo src format selection based on new fps setting,
    potentially switching from JPG to YUYV / M420 when the app lowers the
    fps, resulting in a significant lower cpu load (hdegoede)

v4l-utils-0.8.3
---------------
* Utils changes:
  * Various ir-keytable improvements (mchehab)
  * Various cx231xx parser improvements (mchehab)
* libv4l changes
  * Add a few more laptop models to the upside down devices table (hdegoede)
  * Make libv4l1 compile with kernels >= 2.6.38, which no longer have the
    v4l1 linux/videodev.h header (hdegoede)

v4l-utils-0.8.2
---------------
* Utils changes:
  * Various ir-keytable improvements (mchehab)
  * Various qv4l2 fixes (hverkuil, hdegoede)
  * Various v4l2-ctl fixes (hverkuil)
  * Add parsers for cx231xx i2c, saa7134 pci, sn9c201 usb and generic usb
    logs (mchehab)
  * v4l2-compliance: lots of new tests (hverkuil)
* libv4l changes
  * Add many more laptop models to the upside down devices table (hdegoede)
  * Add support for 8-bits grey format (V4L2_PIX_FMT_GREY) (mchehab)

v4l-utils-0.8.1
---------------
* Utils changes:
  * Various v4l-keytable improvements (mchehab)
  * Various qv4l2 fixes (hverkuil)
  * v4l2-ctl: Added support for s/g_dv_timings (Mats Randgaard)
* libv4l changes (hdegoede):
  * Add many more laptop models to the upside down devices table
  * Detect short frames (and retry upto 3 times to get a non short frame)
  * Support (uvc) cameras with more then 16 framesizes properly (Balint Reczey)
  * libv4l1 no longer relies on the kernel v4l1 compat ioctl handling, many
    thanks to Huzaifa Sidhpurwala for his work on this!
  * Add support for Xirlink C-It YYVYUY
  * Add support for konica yuv420 format

v4l-utils-0.8.0
---------------
* Utils changes:
  * Various v4l-keytable improvements (mchehab)
  * Various v4l2-ctl fixes (hverkuil)
  * Various qv4l2 fixes (hverkuil)
* libv4l changes (hdegoede):
  * Add many more laptop models to the upside down devices table
  * Some minor bugfixes

v4l-utils-0.7.91
----------------
* Utils changes:
  * Improve v4l-keytable to better support IR (mchehab)
  * Rename v4l-keytable to ir-keytable (mchehab)
* libv4l changes (hdegoede):
  * Add more laptop models to the upside down devices table
  * Ignore convert errors in the first few frames of a stream

v4l-utils-0.7.90
----------------
* This is the first release of v4l-utils, v4l-utils is the combination
  of various v4l and dvb utilities which used to be part of v4l-dvb
  mercurial kernel tree and libv4l.
* This first version is 0.7.90, as the version numbers continue were libv4l
  as a standalone source archive stops.
* libv4l changes:
  * Add more laptop models to the upside down devices table
  * Fix Pixart JPEG ff ff ff xx markers removal, this fixes the occasional
    corrupt frame we used to get (thanks to Németh Márton)
  * Enable whitebalance by default on various sonixj based cams
  * Enable whitebalance + gamma correction by default on all sonixb cams
  * Enable gamma correction by default on pac7302 based cams

Note all history below this line only applies to libv4l and not to the utils
----------------------------------------------------------------------------

libv4l-0.6.4
------------
* Add more laptop models to the upside down devices table
* Add error checking to mr97310a decompression
* Increase mr97310a minimum clockdiv upon 3 consecutive decoding errors
* Add support for decompressing CPIA1 compressed YUV
* Speed up autogain algorithm

libv4l-0.6.3
------------
* Add more laptop models to the upside down devices table
* Improved mr97310a decompression
* Add support for decompressing yuv420 planar JPEG (one component per SOS,
  3 SOS per frame), this is needed for w9968cf based cams
* Add support for STV0680 raw bayer data

libv4l-0.6.2
------------
* Add more laptop models to the upside down devices table
* Put usb id in controls shm segment name for USB devices, to better
  distuingish between devices plugged into the same port
* Enable software whitebalance and autogain for mr97310a cameras
* Improvements / tweaks to software autogain algorithm

libv4l-0.6.1
------------
* Add more laptop models to the upside down devices table
* Makefile changes to make life easier for the Debian package (Gregor Jasny)
* Bugfix: fixup 320x240 output for pac7302 cameras
* README improvements / clarifications (Bifferos)
* Bugfix: fix reqbuf Device or Resource busy error when using v4l2_read()
* Some applications want to use jpg format if possible, so do not hide
  it from the apps (do not assume it always needs conversion)
* Change controls shm segment name to include the username, as it is only
  writable by the user (this means libv4l controls are per user) (Gregor Jasny)
* Add support for decompressing sn9c2028 compressed bayer (Theodore Kilgore)
* Report V4L2_FMT_FLAG_EMULATED in v4l2_fmtdesc flags for emulated formats

libv4l-0.6.0
------------
* Recognize disabled controls and replace with fake equivalents where
  available
* Add support for decompressing ov511 and ov518 "JPEG", by piping data through
  an external helper as I've failed to contact Mark W. McClelland to get
  permission to relicense the code. If you know a working email address for
  Mark W. McClelland, please let me know.
* Add tons of laptop models to the upside down devices table
* Support for rgb565 source format by Mauro Carvalho Chehab
* Many bug fixes (see the mercurial tree for details)
* Improved pac207 decompression code to also support higher compression
  modes of the pac207, which enables us to use higher framerates.
  Many many thanks to Bertrik Sikken for figuring the decompression out!

libv4l-0.5.99
-------------
* Link libv4lconvert with -lm for powf by Gregor Jasny
* Fix black screen on devices with hardware gamma control
* Fix crash with devices on which we do not emulate fake controls
* Add a patch by Hans Petter Selasky <hselasky@freebsd.org>, which should
  lead to allowing use of libv4l (and the Linux webcam drivers ported
  to userspace usb drivers) on FreeBSD, this is a work in progress

libv4l-0.5.98
-------------
* Add software gamma correction
* Add software auto gain / exposure
* Add support for separate vflipping and hflipping
* Add fake controls controlling the software h- and v-flipping
* Add ability to determine upside down cams based on DMI info
* Add the capability to provide 320x240 to apps if the cam can only
  do 320x232 (some zc3xx cams) by adding black borders
* Rewrite video processing code to make it easier to add more video filters
  (and with little extra processing cost). As part of this the normalize
  filter has been removed as it wasn't functioning satisfactory anyways
* Support V4L2_CTRL_FLAG_NEXT_CTRL for fake controls by Adam Baker
* Some makefile improvements by Gregor Jasny
* Various small bugfixes and tweaks
* The V4L2_ENABLE_ENUM_FMT_EMULATION v4l2_fd_open flag is obsolete, libv4l2
  now *always* reports emulated formats through the ENUM_FMT ioctl

libv4l-0.5.97
-------------
* As the version number shows this is a beta release of the 0.6.x series,
  the big change here is the addition of video processing to libv4l
  currently this only does whitebalance and normalizing (which turns out
  to be useless for most cams) but the basic framework for doing video
  processing, and being able to control it through fake v4l2 controls using
  for example v4l2ucp is there.
  The initial version of this code was written by 3 of my computer science
  students: Elmar Kleijn, Sjoerd Piepenbrink and Radjnies Bhansingh
* Currently whitebalancing gets enabled based on USB-ID's and it only gets
  enabled for Pixart webcam's. You can force it being enabled with other
  webcams by setting the environment variable LIBV4LCONTROL_CONTROLS, this
  sets a bitmask enabling certain v4l2 controls which control the video
  processing set it to 15 to enable both whitebalancing and normalize. You
  can then change the settings using a v4l2 control panel like v4l2ucp
* Only report / allow supported destination formats in enum_fmt / try_fmt /
  g_fmt / s_fmt when processing, rotating or flipping.
* Some applications / libs (*cough* gstreamer *cough*) will not work
  correctly with planar YUV formats when the width is not a multiple of 8,
  so crop widths which are not a multiple of 8 to the nearest multiple of 8
  when converting to planar YUV
* Add dependency generation to libv4l by: Gilles Gigan <gilles.gigan@gmail.com>
* Add support to use orientation from VIDIOC_ENUMINPUT by:
  Adam Baker <linux@baker-net.org.uk>
* sn9c20x cams have occasional bad jpeg frames, drop these to avoid the
  flickering effect they cause, by: Brian Johnson <brijohn@gmail.com>
* adjust libv4l's upside down cam detection to also work with devices
  which have the usb interface as parent instead of the usb device
* fix libv4l upside down detection for the new v4l minor numbering scheme
* fix reading outside of the source memory when doing yuv420->rgb conversion

libv4l-0.5.9
------------
* Add support for MR97310A decompression by Kyle Guinn <elyk03@gmail.com>
* Add support for sq905c decompression by Theodore Kilgore
  <kilgota@auburn.edu>
* Add hm12 support for the cx2341x MPEG encoder devices by Hans Verkuil
  <hverkuil@xs4all.nl>

libv4l-0.5.8
------------
* Add support for UYVY (for USB Apple iSight) patch by Julien BLACHE
  <jb@jblache.org>
* Remove v4lconvert_yvyu_to_yuv420 function as its functionality is
  duplicate with v4lconvert_yuyv_to_yuv420
* Use Requires.private where appropiate in .pc files (patch by Gregor Jasny)
* Switch to using USB-id's instead of USB product string, as not all devices
  set a unique product string. This fixes the upside down issues with
  genius e-messenger 112 cams
* Add support for sn9c20x-i420 format patch by Vasily Khoruzhick
  <anarsoul@gmail.com>

libv4l-0.5.7
------------
* Fix a nasty (and stupid) bug in the special try_fmt handling for UVC cams
* Add some more verbose logging of various calls when asking libv4l to log
  calls to a file, to assist in (future) debugging

libv4l-0.5.6
------------
* Always do a s_fmt on uvc cams even if this changes nothing, as not doing
  the s_fmt triggers a bug in the uvcvideo driver in kernel <= 2.6.28
  (with certain cams)

libv4l-0.5.5
------------
* Avoid the use of try_fmt as much as possible on UVC cams, instead use the
  results of the enum_framesizes ioctl. This is because:
  1) try_fmt actually causes IO with UVC cams making apps which do lot of
     querrying of device capabilities slow (cheese)
  2) some buggy cams don't like getting lots of UVC video probes and crash
     when they do

libv4l-0.5.4
------------
* Don't report DQBUF errors when errno is EAGAIN, this fixes flooding the
  screen with errors when applications use non blocking mode
* Add support for downscaling to make apps which want low resolutions
  (skype, spcaview) happy when used with cams which can only do high
  resolutions (by Lukáš Karas <lukas.karas@centrum.cz>).
* Add support for converting to YV12 planar (next to the already supported
  YU12 / I420)
* Implement RGB/BGR24 -> YU/YV12 conversion

libv4l-0.5.3
------------
* When conversion requires multiple passes don't alloc the needed temporary
  buffer on the stack, as some apps (ekiga) use so much stack themselves
  this causes us to run out of stack space

libv4l-0.5.2
------------
* Add Philips SPC210NC to list of cams with upside down sensor, reported by
  Rieker Flaik
* Work around some drivers (pwc) not properly reflecting what one gets after a
  s_fmt in their try_fmt answer
* Check that s_fmt atleast gives us the width, height and pixelformat try_fmt
  promised us, and if not disable conversion
* Only check width, height and pixelformat when checking if we are doing
  conversion, instead of doing a memcmp, as that are the only things which
  the convert code checks
* Take into account that the buffers only contain half of the lines when
  field is V4L2_FIELD_ALTERNATE

libv4l-0.5.1
------------
* Add support for software cropping from 352x288 -> 320x240 / 176x144 ->
  160x120, so that apps which will only work with vga resolutions like
  320x240 (Skype!) will work with cams/drivers which do not support cropping
  CIF resolutions to VGA resolutions in hardware. This makes all 2.6.27 gspca
  supported cams, except for the pac7302 which only does 640x480 (and skype
  wants 320x240), work with skype
* The v4lconvert_convert function was becoming a bit of a mess, so split the
  functionailiy into separate v4lconvert_convert_pixfmt, v4lconvert_rotate and
  v4lconvert_crop functions, and make v4lconvert_convert a frontend to
  these
* Do not link the wrapper libs against libpthread (patch from Gregor Jasny)

libv4l-0.5.0
------------
* Add support for enumerating framesizes and frameintervals of emulated
  formats when the driver supports it for the real format
* Make sure the video device always gets opened RW even if the application
  asks for RO
* Add Genius E-Messenger 112 (093a:2476) to list of cams which have their
  sensor upside down

libv4l-0.4.3
------------
* Add suport for YUYV and YVYU packed pixel formats (Jean-Francois Moine)
* Prefer compressed pixformats for resolutions > 176x144

libv4l-0.4.2
------------
* The bayer pixel order in gspca's sonixb driver was different from that in
  the sn9c102 driver from the mainline kernel, a recent gspca patch fixes
  this, adjust libv4l to match (and make it work properly with the sn9c102
  driver).

libv4l-0.4.1
------------
* When the driver supports read() and we are not converting let the driver
  handle read() instead of emulating it with mmap mode
* Fix errors and warnings when compiling with ICC (Gregor Jasny)
* Add support to libv4lconvert for rotating images 90 (for Pixart 7302 cams)
  or 180 (Philips SPC200NC / Philips SPC300NC) degrees
* Add support for Pixart custom JPEG format
* Hide non public symbols (Gregor Jasny)
* Fix and enable x86_64 asm jpeg decompress helper functions (Gregor Jasny)

libv4l-0.4.0
------------
* Be more relaxed in our checks for mixing read and mmap access, we were
  being more strict in this then certain kernel drivers (bttv) making xawtv
  unhappy
* With some drivers the buffers must be mapped before queuing, so when
  converting map the (real) buffers before calling the qbuf ioctl
* Add support for conversion to RGB24 (before we only supported BGR24) based
  on a patch by Jean-Francois Moine
* When the hardware supports a format natively prefer using the native
  version over converting from another supported format
* Various Makefile and pkgconfig file improvements by Gregor Jasny (Debian)
* Drop the appl-patches dir, all application patches are now available and
  tracked here: http://linuxtv.org/v4lwiki/index.php/Libv4l_Progress


libv4l-0.3.9
------------
* Not only see /dev/video* but also /dev/v4l/* as video devices
  (only affects libv4l1 and the wrappers) patch from Brandon Philips
* Silence the creation of the .pc files in the Makefiles (Brandon Philips)
* Part of the copyright headers refered GPL instead of LGPL due to a copy
  and paste error (Brandon Philips)


libv4l-0.3.8
------------
* work around wrong REQUEST_BUFFERS ioctl return code from certain drivers
* add pkg-config (.pc) files for easier detection if libv4l is available
* check capabilities for streaming, if the driver cannot do streaming don't
  insert ourselves between the application and the driver
* intercept get capabilites and report read capability (which we always offer)
* query buffer: indicate the mapping state of our (fake) buffer in the flags


libv4l-0.3.7
------------
* Add spca505/6 and spca508 cam specific formats (YUYV per line variations)


libv4l-0.3.6
------------
* Add missing COPYING.LIB file


libv4l-0.3.5
------------
* Make JPEG decoding more robust


libv4l-0.3.4 (the brownpaperbag release)
----------------------------------------
* The mmap64 support in 0.3.3, has caused a bug in libv4l1 when running on
  32 bit systems (who uses those now a days?), this bug caused v4l1
  compatibility to not work at all, this release fixes this
* Some apps (xawtv, kopete) use an ioctl wrapper internally for various
  reasons. This wrappers request argument is an int, but the real ioctl's
  request argument is an unsigned long. Passing the VIDIOC_xxx defines through
  to the wrapper, and then to the real ioctl, causes the request to get sign
  extended on 64 bit args. The kernel seems to ignore the upper 32 bits,
  causing the sign extension to not make a difference. libv4l now also
  ignores the upper 32 bits of the libv4lx_ioctl request argument on 64 bit
  archs
* Add a bugfix patch for kopete in the appl-patches dir, currently it assumes
  that it got the width and height it asked for when doing a S_FMT, which is a
  wrong assumption


libv4l-0.3.3
------------
* Add open64 and mmap64 wrappers to the LD_PRELOAD wrapper libs, so that
  they also work for applications compiled with FILE_OFFSET_BITS=64, this
  fixes using them with v4l-info
* While looking at xawtv in general, found a few bugs in xawtv itself, added
  a patch to fix those to the appl-patches dir
* Talking about the appl-patches dir, restore that as it accidentally got
  dropped from 0.3.2
* Be more verbose in various places when it comes to logging (esp errors)
* Change v4lconvert_enum_fmt code a bit, so that it is easier to add more
  supported destination formats to libv4lconvert
* Don't return -EINVAL from try_fmt when we cannot convert because the cam
  doesn't have any formats we know. Instead just return as format whatever the
  cam returns from try_fmt, this new behavior is compliant with the v4l2
  api as documented

libv4l-0.3.2
------------
* Add support for converting from sn9c10x compressed data
* Add support for converting from pac207 compressed data
* Add "make install" Makefile target

libv4l-0.3.1
------------
* Only serialize V4L2_BUF_TYPE_VIDEO_CAPTURE type ioctls
* Do not return an uninitialized variable as result code for GPICT
  (fixes vlc, but see below)
* Add an apps-patches directory which includes:
  * vlc-0.8.6-libv4l1.patch, modify vlc's v4l1 plugin to directly call into
    libv4l1, in the end we want all apps todo this as its better then
    LD_PRELOAD tricks, but for vlc this is needed as vlc's plugin system
    causes LD_PRELOAD to not work on symbols in the plugins
  * camorama-0.19-fixes.patch, small bugfixes to camorama's v4l1 support,
    this patch only fixes _real_ bugs in camorama and does not change it to
    work with v4l1compat. Although it does work better with these bugs fixed
    :) With this patch and LD_PRELOAD=<path>/v4l1compat.so it works
    flawless.


libv4l-0.3
----------
* add extern "C" magic to public header files for c++ usage (Gregor Jasny)
* Make libv4l1 and libv4l2 multithread use safe, see README.multi-threading
* Add v4lx_dup() calls (and intercept dup() from the wrappers) this fixes
  use with gstreamer's v4l2 plugin (tested with cheese)
* Hopefully definitely fix compile errors on systems with a broken videodev2.h

libv4l-0.2
----------
*** API change ***
* Change v4lconvert api so that the v4lconvert struct always gets allocated
  by the library, this to make it opaque, so that we can avoid future API
  and ABI changes
* Add support for yuv420 -> bgr24 conversion
* When converting from v4l2 pixelformat to v4l12 palette return
  VIDEO_PALETTE_YUV420P instead of VIDEO_PALETTE_YUV420 for
  V4L2_PIX_FMT_YUV420 as that is what most apps seem to expect
* override kernel v4l1 compat min / max size with our own more accurate values
* fix v4l1 munmap bug where it didn't recognise the buffer being unmapped was
  our fake buffer (fixes gstreamer v4l1 support, checked with cheese)
* add support for reporting the emulated pixelformats with ENUM_FMT, this
  defaults to off, and can be activated by passing a flag to enable it to
  v4l2_fd_open. This gets enabled by default the wrappers.
* v4l2: mmap the real device buffers before doing conversion when DQBUF gets
  called before the application has called mmap (avoid crash).


libv4l-0.1
----------
* major shuffle / rewrite now split into libv4l1, libv4l2, libv4lconvert
  and 2 wrappers for binary compatibility
* rewritten LGPL bayer decoding
* many many other changes and fixes


v4l1-compat-0.6 (V4L2 apps stay working)
----------------------------------------
* Do not go into emulation mode of rgb24 immediately, but only after a
  GPICT ioctl which has not been preceded by a SPICT ioctl, AKA do not get
  in the way of V4L2 read calls by doing conversion on them
* Do not get in the way of mmap calls made by V4L2 applications
* Fix swapping of red and blue in bayer -> bgr24 decode routine
* Remember the v4l1 palette asked for with SPICT and return that, as
  otherwise we loose information when going v4l1 -> v4l2 -> v4l1, for example
  YUV420P becomes YUV420, which are separate in v4l1.


v4l1-compat-0.5 (perfect camorama)
----------------------------------
* Allow changing of format after the buffers have been mapped, by tearing
  down the entire house, changing the fundament and then rebuilding it.
  Now changing the capture resolution in camorama works!
* Fix jpeg decoding error reporting
* Allow jpeg's with a height which is a multiple of 8 (was 16)
* Remove a number of pretty new VIDIOCXXX -> string mappings from log.c,
  fixing compiling with somewhat older kernels


v4l1-compat 0.4
---------------
* Do not even try to change the format in v4l1_compat_set_format(), unless
  _really_ necessary.
* Cleanup ambigious use of src_format (no functional changes)
* Drop the mmap hack for zerocopy access under certain conditions, one of them
  that the cam can deliver the requested format. Although avoiding the
  memcpy in this scenarios is a good thing todo, there were several issues
  with the 0.3 implementation of this, fixing all these means adding lots of
  special cases all over the code. So instead we just drop support and
  always do atleast a memcpy (or a conversion). If an application cannot
  live with the speed penalty this imposes it should be ported to v4l2.
* Now that we've gotten rid of the zerocopy mmap hack, we can safely allow
  mixing read and mmap based IO.
* Explictly include linux/ioctl.h, to fix compile with kernel headers where
  linux/videodev.h doesn't.


v4l1-compat 0.3
---------------
* Don't allow multiple opens, in theory our code can handle it, but not all
  v4l2 devices like it (ekiga does it and uvc doesn't like it).


v4l1-compat 0.2
---------------
* When mmap gets passed an fd of -1 (anonymous map) don't look for it in our
  list of managed fds, as we use -1 to mark unused entries (fixes ekiga
  crashing). Also check for an fd of -1 in the other calls we intercept.
* In close() start with removing the fd from our list of managed fds, this must
  be done first, because as soon as we've done the actual close syscall, the
  fd maybe returned by an open in another thread and we don't want to intercept
  calls to this new fd.
* Make unknown v4l1 palette types a normal level log messages instead of an
  error.
* When an applicaiton changes the width / height through the CMCAPTURE ioctl
  remember the new width and height.
* If the devices initial v4l2 pixformat has no corresponding v4l1 palette, try
  setting a format which does (and which we emulate when necessary) so that
  applicactions which just query the current format (GPICT) and then take
  whatever they get will work (partially fixes camorama)
* Implement our own SWIN instead of using kernel compat layer, for more
  flexibility and better error checking


v4l1-compat 0.1
---------------
* Initial public release.
