<!--
    Licensed to the Apache Software Foundation (ASF) under one or more
    contributor license agreements.  See the NOTICE file distributed with
    this work for additional information regarding copyright ownership.
    The ASF licenses this file to You under the Apache License, Version 2.0
    (the "License"); you may not use this file except in compliance with
    the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->
<!--
    Demonstrates various ActiveMQ configuration options

    To run ActiveMQ with this configuration add xbean:examples/conf/activemq-demo.xml to your command

    e.g. $ bin/activemq console xbean:examples/conf/activemq-demo.xml
 -->
<beans
  xmlns="http://www.springframework.org/schema/beans"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
  http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd
  http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">

    <!--
        Allows us to use system properties as variables in this configuration
        file. For more information, see the Javadoc:

        http://static.springframework.org/spring/docs/2.5.x/api/org/springframework/beans/factory/config/PropertyPlaceholderConfigurer.html
    -->
    <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
        <property name="locations">
            <value>file:${activemq.conf}/credentials.properties</value>
        </property>
    </bean>

    <!--
        The <broker> element is used to configure the ActiveMQ broker.

        Tips:
          - Change the brokerName attribute to something unique
    -->

    <broker xmlns="http://activemq.apache.org/schema/core" brokerName="amq-broker" useJmx="true">

        <!--
            Examples of destination-specific policies using destination
            names or wildcards. For more information, see:

            http://activemq.apache.org/per-destination-policies.html
            http://activemq.apache.org/destination-features.html
            http://activemq.apache.org/slow-consumer-handling.html
            http://activemq.apache.org/subscription-recovery-policy.html
        -->
        <destinationPolicy>
            <policyMap>
                <policyEntries>
                    <!--
                        Limit ALL queues and topics to using 5mb of memory and turn on producer flow control
                    -->
                    <policyEntry queue=">" producerFlowControl="true" memoryLimit="5mb"/>
                    <policyEntry topic=">" producerFlowControl="true" memoryLimit="5mb">
                        <dispatchPolicy>
                            <!--
                              Use total ordering, see:
                                 http://activemq.apache.org/total-ordering.html
                            -->
                            <strictOrderDispatchPolicy/>
                        </dispatchPolicy>
                        <subscriptionRecoveryPolicy>
                            <!--
                                Upon subscription, receive the last image sent
                                on the destination.
                            -->
                            <lastImageSubscriptionRecoveryPolicy/>
                        </subscriptionRecoveryPolicy>
                    </policyEntry>
                </policyEntries>
            </policyMap>
        </destinationPolicy>

        <!--
            The managementContext is used to configure how ActiveMQ is exposed in
            JMX. By default, ActiveMQ uses the MBean server that is started by
            the JVM. For more information, see:

            http://activemq.apache.org/jmx.html
        -->
        <managementContext>
            <managementContext createConnector="false"/>
        </managementContext>

        <!--
            The network connectors are used to create a network of brokers. For
            more information, see:

            http://activemq.apache.org/networks-of-brokers.html
        -->
        <!-- networkConnectors-->
            <!--
                This connector automatically discovers the other brokers using
                IP multicast. Such discovery is possible only because the
                openwire transport connector is advertised via the default IP
                multicast group. For more information on multicast, see:

                http://activemq.apache.org/multicast-transport-reference.html

            <networkConnector name="default-nc" uri="multicast://default"/>
            -->

            <!--
                Example of a static configuration. For more information, see:

                http://activemq.apache.org/static-transport-reference.html

            <networkConnector name="host1 and host2" uri="static://(tcp://host1:61616,tcp://host2:61616)"/>
            -->
        <!-- /networkConnectors-->

        <!--
            Configure message persistence for the broker. The default persistence
            mechanism is the AMQ store (identified by the amqPersistenceAdapter).
            For more information, see:

            http://activemq.apache.org/persistence.html
        -->
        <persistenceAdapter>
             <kahaDB directory="${activemq.data}/dynamic-broker1/kahadb" indexWriteBatchSize="1000" enableIndexWriteAsync="true" enableJournalDiskSyncs="false" />
        </persistenceAdapter>

        <!--
            Configure the following if you wish to use journaled JDBC for message
            persistence.

        <persistenceFactory>
            <journalPersistenceAdapterFactory dataDirectory="${activemq.data}" dataSource="#postgres-ds"/>
        </persistenceFactory>
        -->

        <!--
            Configure the following if you wish to use non-journaled JDBC for message
            persistence.

        <persistenceAdapter>
            <jdbcPersistenceAdapter dataSource="#postgres-ds"/>
        </persistenceAdapter>
        -->

        <!--
            The sslContext can be used to configure broker-specific SSL properties.
            For more information, see:

            http://activemq.apache.org/how-do-i-use-ssl.html
        -->
        <sslContext>
            <sslContext keyStore="file:${activemq.conf}/broker.ks"
              keyStorePassword="password" trustStore="file:${activemq.conf}/broker.ts"
              trustStorePassword="password"/>
        </sslContext>


        <!--
            The systemUsage controls the maximum amount of space the broker will
            use before slowing down producers. For more information, see:

            http://activemq.apache.org/producer-flow-control.html
        -->
        <systemUsage>
          <systemUsage>
            <memoryUsage>
              <memoryUsage limit="20 mb" />
            </memoryUsage>
            <storeUsage>
              <storeUsage limit="1 gb" />
            </storeUsage>
            <tempUsage>
              <tempUsage limit="100 mb" />
            </tempUsage>
          </systemUsage>
        </systemUsage>


        <!--
            The transport connectors expose ActiveMQ over a given protocol to
            clients and other brokers. For more information, see:

            http://activemq.apache.org/configuring-transports.html
        -->
        <transportConnectors>
            <!-- Create a TCP transport that is advertised on via an IP multicast
              group named default. -->
            <transportConnector name="openwire" uri="tcp://localhost:61616" discoveryUri="multicast://default"/>
            <!-- Create a SSL transport. Make sure to configure the SSL options
              via the system properties or the sslContext element. -->
            <transportConnector name="ssl" uri="ssl://localhost:61617"/>
            <!-- Create a STOMP transport for STOMP clients. -->
            <transportConnector name="stomp" uri="stomp://localhost:61613"/>
            <!-- Create a Websocket transport for the websocket dmeo -->
            <transportConnector name="ws" uri="ws://localhost:61614/" />
        </transportConnectors>

        <!-- destroy the spring context on shutdown to stop jetty -->
        <shutdownHooks>
            <bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" />
        </shutdownHooks>

    </broker>

    <!--
       Lets deploy some Enterprise Integration Patterns inside the ActiveMQ Message Broker
       For more details see

       http://activemq.apache.org/enterprise-integration-patterns.html
    -->
    <import resource="camel.xml"/>


    <!--
        An embedded servlet engine for serving up the Admin console and other demos.
        For more information, see:

          http://activemq.apache.org/web-console.html
    -->
    <import resource="jetty-demo.xml"/>


    <!--
        Uncomment to create a command agent to respond to message based admin
        commands on the ActiveMQ.Agent topic. For more information, see:

        http://activemq.apache.org/command-agent.html

    <commandAgent xmlns="http://activemq.apache.org/schema/core" brokerUrl="vm://localhost"/>
    -->


    <!--
        This xbean configuration file supports all the standard Spring XML
        configuration options such as the following bean definitions.
    -->

    <!-- Postgres DataSource Sample Setup -->
    <!--
    <bean id="postgres-ds" class="org.postgresql.ds.PGPoolingDataSource" destroy-method="close">
      <property name="serverName" value="localhost"/>
      <property name="databaseName" value="activemq"/>
      <property name="portNumber" value="0"/>
      <property name="user" value="activemq"/>
      <property name="password" value="activemq"/>
      <property name="dataSourceName" value="postgres"/>
      <property name="initialConnections" value="1"/>
      <property name="maxConnections" value="10"/>
    </bean>
    -->

    <!-- MySql DataSource Sample Setup -->
    <!--
    <bean id="mysql-ds" class="org.apache.commons.dbcp2.BasicDataSource" destroy-method="close">
      <property name="driverClassName" value="com.mysql.jdbc.Driver"/>
      <property name="url" value="jdbc:mysql://localhost/activemq?relaxAutoCommit=true"/>
      <property name="username" value="activemq"/>
      <property name="password" value="activemq"/>
      <property name="maxTotal" value="200"/>
      <property name="poolPreparedStatements" value="true"/>
    </bean>
    -->

    <!-- Oracle DataSource Sample Setup -->
    <!--
    <bean id="oracle-ds" class="org.apache.commons.dbcp2.BasicDataSource" destroy-method="close">
      <property name="driverClassName" value="oracle.jdbc.driver.OracleDriver"/>
      <property name="url" value="jdbc:oracle:thin:@localhost:1521:AMQDB"/>
      <property name="username" value="scott"/>
      <property name="password" value="tiger"/>
      <property name="maxTotal" value="200"/>
      <property name="poolPreparedStatements" value="true"/>
    </bean>
    -->

    <!-- Embedded Derby DataSource Sample Setup -->
    <!--
    <bean id="derby-ds" class="org.apache.derby.jdbc.EmbeddedDataSource">
      <property name="databaseName" value="derbydb"/>
      <property name="createDatabase" value="create"/>
    </bean>
    -->

</beans>