smartmontools has been installed

To check the status of drives, use the following:

	/usr/local/sbin/smartctl -a /dev/ad0	for first ATA/SATA drive
	/usr/local/sbin/smartctl -a /dev/da0	for first SCSI drive
	/usr/local/sbin/smartctl -a /dev/ada0	for first SATA drive

To include drive health information in your daily status reports,
add a line like the following to /etc/periodic.conf:
	daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART-capable disks.

To enable drive monitoring, you can use /usr/local/sbin/smartd.
A sample configuration file has been installed as 
/usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit appropriately

To have smartd start at boot
	echo 'smartd_enable="YES"' >> /etc/rc.conf
